Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11716017 times)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8235 on: April 05, 2015, 12:21:57 AM »
  Hoppy:
  One earth ground line is the one that is being connected to the old radiator that has been buried in the ground, with one wire coming out from the dirt, to which they connect to. The other ground line is going to the faucet water pipe, where it is tightened it up with a pair of piers.
  These systems don't always have to comply with the exact same bulb brightness as compared to the 220v grid source.

  My question would be: Why do they need to use the 12v to 220v "converter" to provide 220v to the circuit.
  Akula also supplied the yoke secondary coil with rectified 220v, (300+ volts possibly), from his power supply, on his first device video.   Something to think about? 
 

Nick,

Please see my last post that has been edited.

Maybe to light the lamps from a concealed power supply.  ;)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8236 on: April 05, 2015, 12:31:35 AM »
  Oh, what hidden power source?  You mean that all those guys that are holding all the components in the air, are blind to hidden sources, as well.
Tesla coil in the trees, or in the Lada parked in front, ground loop from grid source?   Common Hoppy... it ain't faked. Get a grip.

cheappower2012

  • Full Member
  • ***
  • Posts: 245
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8237 on: April 05, 2015, 02:59:45 AM »
To Nickz
There are 3 different readings taken,one is an attempt to measure the ac voltage across the lights
this resulted in the digital meter cycling,its caused by pulses in the ac,caused by the setup.
Theres a ground current reading,this is a false current reading created by the Tesla interface,
mixing pulses with the 50hz ,220 vac.The cheap clampmeter used has a defect that under these
 conditions creates a false ground current reading.I have a clampmeter made by the same company as the one used
it has this defect.Then theres the current reading of one bulb then 2 bulbs,the translation helps
as theres no close up of the reading.The point is theres a very good chance that it is outputting 5,000 watts.
As to why theres the ac inverter its more a show,he could have built the looping internally
as in other devices.Its to show that the device is in a looped self running mode.This
 device is the guts of the 2004 device in a green box
the resonator is hidden in that one too,in a can,aking.21 has talked to Tariel
 a lot,Tariel told him theres a special component he makes or modifies
that makes this device work only he knows how to make it,this is why people will
 fail if they try to replicate it.As I have said many times it is not a Tesla invention
nor related to anything Tesla invented,Tariel says its a Tesla invention to send people
on a wild goose chase,I believe its an accidental discovery by Tariel.The term resonator
is used by Tariel to fake you out,its an active component,in every device its hidden
except in the aquarium 2 device.As you have pointed out it is very hard to put on a demo
in front of a large group of people and fake them all out,as some will be skeptical and look real hard for fraud.
I don't believe its impossible to replicate, but its very,very hard to figure out enough correct information to replicate.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8238 on: April 05, 2015, 04:00:47 AM »
  Cheappower:
  Resonator hidden in the box... well maybe, but  I don't think so. It needs to be wound on the same core as the grenade, or how will it resonate with anything. Or possibly is not an absolutely essential part of this type of device.
 Akula used a resonator coil on his first and second video device, and did not hide them at all, so does Ruslan.
So I don't think that is the "secret".
  The only thing that I can accept is that the 5 1000 watt bulbs are lit, and the device self running. Regardless of current measurement, which look like they are all incorrectly read by the amp meter.
Ruslan can read his output with a multi-meter possibly because his output has been rectified to DC, or for possibly another reason. But, I can't.
  That's where I'm at right now, rectifying the output to DC, as I can't read the output on any meter, even without the Kacher being connected.  I still don't understand why they rectify the output to DC to run AC bulbs, but, I'm going to try it anyway, to see what happens.

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8239 on: April 05, 2015, 05:19:33 AM »
Are we talking about the ruslan device?  The power supply is a 220 input to 24 volt output.  I also think the reason for rectification is because of the high frequency output would not work well in the standard power supply and may not light bulb properly. look up skin effect.  Different metals will have a different skin effect for example iron is .008 mm depth at 10 khz. I dont know what the skin effect of tungsten (filament light bulbs) would be. But not good at ultrasonic frequencies. The reason for the low voltage converter is to run the electronic chips they wont operate at 220v for sure they are integrated. Whats the confusion about? Looks like 2 sources of input high voltage & high current using higher frequencies allows the air coil mixer to operate but must stick with copper at that stage due to skin effects issues. The 2 fields should mix in the grenade in phase and resonant. So the special transformer is multiplying the electric field times the magnetic field for output. Then rectified to be able to be used with the ferrite transformer cores in the power supply and the tungsten in the bulb. Then finally brought back down to low voltages to run the integrated circuits again. The concept is clear getting it to work is the problem seem like there are a lack of successful replications.  So the goal is to provide 2 fields to the air coil grenade 1st one is high voltage field (tesla) 2nd one is high current field (3 turn output somewhat like a spot welder design).  In phase Thats why tesla pulse on top of the yoke 3 turn output sinewave. I wonder if we could use an audio amplifier to drive the yoke windings dont want to blow my amp but just wondering, has anyone tried that?

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8240 on: April 05, 2015, 05:37:14 AM »
http://www.ebay.com/itm/3V-36V-Dual-Motor-Driver-Board-Module-H-bridge-DC-MOSFET-IRF3205-10A-Peak-30A-/171205708868?pt=LH_DefaultDomain_0&hash=item27dca7cc44

what about this stepper motor driver board.
could it be used for a yoke driver maybe with an arduino controlling it?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8241 on: April 05, 2015, 07:19:13 AM »
Are we talking about the ruslan device?  The power supply is a 220 input to 24 volt output.  I also think the reason for rectification is because of the high frequency output would not work well in the standard power supply and may not light bulb properly. look up skin effect.  Different metals will have a different skin effect for example iron is .008 mm depth at 10 khz. I dont know what the skin effect of tungsten (filament light bulbs) would be. But not good at ultrasonic frequencies. The reason for the low voltage converter is to run the electronic chips they wont operate at 220v for sure they are integrated. Whats the confusion about? Looks like 2 sources of input high voltage & high current using higher frequencies allows the air coil mixer to operate but must stick with copper at that stage due to skin effects issues. The 2 fields should mix in the grenade in phase and resonant. So the special transformer is multiplying the electric field times the magnetic field for output. Then rectified to be able to be used with the ferrite transformer cores in the power supply and the tungsten in the bulb. Then finally brought back down to low voltages to run the integrated circuits again. The concept is clear getting it to work is the problem seem like there are a lack of successful replications.  So the goal is to provide 2 fields to the air coil grenade 1st one is high voltage field (tesla) 2nd one is high current field (3 turn output somewhat like a spot welder design).  In phase Thats why tesla pulse on top of the yoke 3 turn output sinewave. I wonder if we could use an audio amplifier to drive the yoke windings dont want to blow my amp but just wondering, has anyone tried that?
  end quote.


    Well, for one thing why anyone would think that a 220v Ac to 24v DC power supply would NEED a rectified DC voltage of over 300v, for it to work properly. And also, why 220v high current AC bulbs would NEED 300+ volts DC current,  as I had mentioned previously.  As there is no problem lighting AC bulbs using AC voltage with my device. Nothing to do with skin effect
  The concept may be clear to you, but only a few people have been able unravel the mistery of it's effect generation.

  Another point is that there are not 2 frequencies to be heterodyned, but there are three different frequencies. As the real power is coming from the magnetic output of the yoke 28 turns coil, along with the grenade's 168 turn grenade output coil. Which is also an inductor, and not just the output coil for the 2 other frequencies. If I run my device with the 3 turns coil circuit disconnected, I see no or very little difference in the output. The bulbs shine at almost the same brightness. This indicated to me that my Kacher to the grenade 24 turn inductor (resonator coil) are not in sync, yet. And as I have not been able to sync them up properly, using tuning capacitors, etz... the windings turn count on the 19m, or 12m, or 9m resonator coil are not correct, at least not for my set up.
 As I have several tap points on all my inductors, I'll be testing these different tap points to see what difference that can make.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8242 on: April 05, 2015, 11:15:23 AM »
  Oh, what hidden power source?  You mean that all those guys that are holding all the components in the air, are blind to hidden sources, as well.
Tesla coil in the trees, or in the Lada parked in front, ground loop from grid source?   Common Hoppy... it ain't faked. Get a grip.

Like with all good magic, its important to keep the audience occupied in the 'safe' area. No wandering around the stage.  ;)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8243 on: April 05, 2015, 03:45:40 PM »
   They were wandering all over the place, looking at the trees, looking at the road, looking at the ground, looking at the Niva, looking at the power lines. But, no one located that strange illusive transmiter that can light up 5000w of incandescent bulbs from a distance.  Maybe it's due to Ruslan's radio tower, and they are all in cahoots.  Ha, ha...  Too bad we weren't invited.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8244 on: April 05, 2015, 03:57:24 PM »
   They were wandering all over the place, looking at the trees, looking at the road, looking at the ground, looking at the Niva, looking at the power lines. But, no one located that strange illusive transmiter that can light up 5000w of incandescent bulbs from a distance.  Maybe it's due to Ruslan's radio tower, and they are all in cahoots.  Ha, ha...  Too bad we weren't invited.

They were his security team making sure nobody wandered into 'sensitive' areas.  ;D

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8245 on: April 05, 2015, 04:11:36 PM »
  There is a point in the video where TK's helper looked a bit worried. Maybe someone was getting too HOT.
   We could talk about this forever, which it seems that we already have. Good way to waste more time.  But,
 it's not really all that much fun, at least not for me.

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8246 on: April 05, 2015, 05:13:34 PM »
Nick?
This is what i am observing on my scope so far.
2 driver boards 2 frequencies.

1st is the yoke driver board frequency in the range of 25-50 khz or so. i do not have my caps yet to know exactly where that is going to resonate. (it has vco pll chip 4046) so frequency can change within a range.
18 volt dc input 4-5amp or so. (blew a 5 amp fuse 1 time)

2nd is just a pulse at the top of the peak of first.  it seems to set a a resonance  in the tesla secondary 1-2 mhz. (ringing the bell) -generating the hv/hf field. (simulating a spark gap but more controlled and in phase)
30 volt dc input 1 amp

The 2 secondaries on the yoke should be same frequency and phase i do not see where your getting a 3rd frequency can you explain?

Are you saying the 3 turn coil does not produce high current for you or just no significant help to light the bulbs?. I have not gotten to that stage yet.

Where is the 3rd frequency??


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8247 on: April 05, 2015, 06:07:11 PM »
  If the 3 turns coil is producing a HIGH amp output at the yoke, or at the 0.47 tuning cap test point, I don't see it.
 Can that 3 turns coil light an incandescent high amp bulb by itself, with no Kacher connection attached, to prove that it's really outputting a useable amount of power. No, not on my device. But, the yoke's 25 turns secondary can light 7 100 watt bulbs, by itself, even with no 168 turns grenade coil connected.

  Are you taking readings of the yoke to the 168 turns output coil, as well.  Should be the same frequency as the 3 turn, but, is it?
  The 168 turns grenade coil is also connected to the 3 turns coil at the tuning cap, on some diagrams, and not connected to the 3 turns coil on other diagrams. Which is the right way to do it, who knows? I've tried it both ways. Not much difference in my case.
  My Mazilli push-pull oscillator automatically runs at whatever coil frequency it's connected to, so it's not resonating at any set frequency, but the output frequency is dependent on the coils it's connected to.
  As you have a scope, and I don't, at least not yet,  please let us know what you find. 

cutter

  • Newbie
  • *
  • Posts: 1
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8248 on: April 06, 2015, 03:54:34 PM »
高压线圈的线长=手榴弹线圈的线长=电气干扰波长的1/4。

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8249 on: April 06, 2015, 04:02:23 PM »
  Last night I made a full bridge rectifier from 4 IN5408 diodes. This was placed at the output to my bulbs, to see what would happen, when the bulbs are lit using DC voltage, instead of AC.  Well, the bulbs do light about the same as without this rectifier, but after a few minutes running they did overheat, and melted the solder.  But before that, there were some changes in the way the system output works on rectified DC, but I need more time to study those effects, and possibly return some of that DC back to the input side.
  I don't have any UF series diodes left, at the moment to try those out.
  Any suggestions on which diodes to use?  Diodes that can be purchased at Radio Shack, or from a Tv repair shop, perhaps.