Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715584 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8190 on: March 30, 2015, 07:00:23 PM »
  Void:
   I get the best lumin levels when I use two or three 100w, 120v bulbs. So, I'm trying to tune the circuit to that, using different tuning caps, and further adjusting the yoke's output frequency with the use of one or more magnetite magnets.  I also place ferrite pieces inside of the grenade tube, as well as ferrite pieces inside the Kacher pipe, and I've added some more tuning caps at the bulbs.  I can now get the thing to stop ringing, and go into the higher non audible frequencies, as well.  Still a long road ahead...
  Void, maybe the Mazilli crt is not able to output more than 200-300 watts, or so.  That's what it looks like, for now.

  I'm trying to get a pc based 20mhz scope, to connect to my second pc, for now. Along with a 100x scope probe, both for less than $100. Which is what I can afford, for now.  I'm still looking locally for an analog scope though, as well.

   

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8191 on: March 31, 2015, 12:04:53 AM »
Deleted, see post below.

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8192 on: March 31, 2015, 12:07:25 AM »
   Lost_bro:
   So, if I raise the input voltage from 12v to 24v, will the current draw be reduced by 1/2.  Or not? 
   I'm trying to find a solution to the fet overheating issue, still.  So, if by raising the voltage will not help the overheating, let me know. 
    The total power drawn may be the same, but the overheating may or may not be reduced.

 
 Hi NickZ

Well there are two sides to every coin:

To make the math very easy.... assume 100% efficiency;   (real life losses not included)

Take a 12vdc-120VAC inverter providing 1200watts @ 120VAC for example:

P/E=I

1200watts output/12vdc input = 100amps;


Now take a 24vdc-120VAC inverter providing the *same* 1200watts @ 120VAC:

P/E=I

1200watts output/ 24vdc input = 50amps;

Here we have increased the INPUT VOLTAGE by a factor of 2 and REDUCED the Amps Consumed by 1/2 for the *SAME* load!

Yes! that's right..... the 24VDC-120VAC inverter will consume 1/2 the amperage of the 12VDC-120VAC at the *SAME* load.

This IS how it WORKS!

Now:  We know that we are talking about 2 different inverters of course..... 

We also know that you CANNOT just take a 12 vdc -120VAC inverter and hook it up to 24VDC! (unless you are making a magic smoke generator)

So:    Both the 12VDC and 24VDC inverters have different size inductors / XFRMRs and exhibit different winding ratios, impedance's, etc......

But the basic fact regarding the relationship between INPUT VOLTAGE and AMPEREs CONSUMED cannot be denied.  (otherwise know as Ohm's Law)



take care, peace
lost_bro

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8193 on: March 31, 2015, 03:53:40 AM »
  Ok, Bro, I get it, what had confused me was when Hoppy mentioned that using the 220v bulbs would cut the wattage used by 1/2, and then I added my wishful thinking into it.
 
   I just did a little test... to see what happens when I disconnect one of the two output lines that go to the bulbs. I left one line connected, and the other line was connected only to my 37.5 meter earth ground. I was able to light a 40 watt bulb, along with a 220v microwave bulb, in parallel. I don't know what that may mean, or what the amps to ground are,  as I haven't measured it yet.

lost_bro

  • Sr. Member
  • ****
  • Posts: 282
    • youtube channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8194 on: March 31, 2015, 04:37:03 AM »
  Ok, Bro, I get it, what had confused me was when Hoppy mentioned that using the 220v bulbs would cut the wattage used by 1/2, and then I added my wishful thinking into it.
 
   I just did a little test... to see what happens when I disconnect one of the two output lines that go to the bulbs. I left one line connected, and the other line was connected only to my 37.5 meter earth ground. I was able to light a 40 watt bulb, along with a 220v microwave bulb, in parallel. I don't know what that may mean, or what the amps to ground are,  as I haven't measured it yet.

Hi NickZ
Is your set-up battery powered?   No mains connection at any point?
Are both incandescent bulbs?
It would be interesting to measure the amperes to ground......

EDIT;  Does the input current change when running the bulbs with the single wire/ ground wire configuration?

take care, peace
lost_bro

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8195 on: March 31, 2015, 04:59:17 AM »
Hi there guyz :)

Back again for a while,
First thing want to inform that Ruslan succeeded with his next replication :). Bravo.

https://www.youtube.com/watch?v=RYjPLRQunGk&feature=autoshare

Be patient He will show you it working! :), just a tap of 12V only.

Lost_bro,
 You are so close to make it work as how akula and Ruslan has. Saw your vids, Nice man, keep it up!
Those pulses are the key. but bit hard part is where tuning comes in.

Magpwr,
Nice testings man, And yes about the info about the ground , currents going thru ground, yes that needs to be achieved.
part of the Essential key to all of this :). Keep it up.
Thnx to go back into tesla's words, many hints.
Ofcourse, the more input, the higher output for sure but, we know we could go from small input and after reaching resonance it's multiplied
many times.

Remember We need to reach the Resonating point and Sync of Waves. Key 2.

integrated circuit is the only way out with this, start with  TL494's and more.. You have to need them in order to make these systems work.
But take my advice with the pics also that I provided as I tested it already ;).
Reach Resonance with the cap and the cap will reach a constant mass descharge pero mili second or nano second pulse.
Light will blink so fast you wont realise it!.
Resistance is Power.

Cheerz~

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8196 on: March 31, 2015, 04:24:25 PM »
Hi NickZ
Is your set-up battery powered?   No mains connection at any point?
Are both incandescent bulbs?
It would be interesting to measure the amperes to ground......

EDIT;  Does the input current change when running the bulbs with the single wire/ ground wire configuration?

take care, peace
lost_bro

   My device is battery powered, but it can also be powered by my 10amp battery charger.  Sometimes I use both at the same time.  Yes the bulbs I use are 100w, 120v incandescent. But, the incandescent microwave 220v bulb lights, as well. 
My meter can not read the output from my device only the input, as it's not 60hz. I use an analog, as well as a digital meter.
But, the digital meter readings go all over the place.
  The battery voltage drops quickly on my car battery for some reason, when just that is being used to power the unit.  Not sure why, as it will start a car, but my battery may be getting sulfated, as it's a couple of years old, but has not been used at all since it was new, until lately.
  Of course the input power is going to change, when only lighting a 40 watt bulb, compared to the normal 300watt load.

 
   I'll do some more tests today, and report back. 
I still don't believe there is any real POWER coming from the ground, but it's going to ground instead. But maybe current can flow both ways, to and from the earth ground.

  I can also light a 60 watt bulb on a single grid positive 110v line, and negative of bulb to my earth ground.  But, I won't do that...

    Geo:  We're still waiting for you to SHOW us what you've done.  NO videos, no pics of your device, nothing yet.
   So, How can you be sure that the TL494 is key to allowing for the extra power? 
   Did Vasmus, SR193, Kapanadze, Stepanov, and others need to use a nano second pulser crt to make their devices work?
   My feelings are that the proper heterodyning of various frequencies are the key, and not the nano pulser circuit. 
   Time will tell.
 

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8197 on: March 31, 2015, 11:35:18 PM »
   Did Vasmus, SR193, Kapanadze, Stepanov, and others need to use a nano second pulser crt to make their devices work?
   My feelings are that the proper heterodyning of various frequencies are the key, and not the nano pulser circuit. 
   Time will tell.
 

From what I've seen in akula/Ruslan/Dally methods the main thing is how you combine radiation from Tesla coil to accelerate electrons movement in coil and that goes over virtual capacitor where each plate is the coil and one of the these coils are heavily magnetized...

This is reverse from what electricity makes as it produce electrical field and magnetic field. Seems when you combine those components in proper way you can produce electricity as well without spending much effort for it. Also due radiation emitting from Tesla coil (which is electrical and alpha particles) the processes on subatomic level seem can be kicked off for energy extraction from that level.
So it is fundamental basis from my opinion how you make self runners on this category....

PS> Also with Yoke device basically there was quite similar approach to cause NMR with help of resonance on nuclear spin elevation where electrons can depart orbits of nucleus then have release of energy. The trains of resonant pulses is the key.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8198 on: April 01, 2015, 02:10:00 AM »
   T-1000:
   And from what I've seen...   There is no NMR in these devices, at least not the kind some of you guys are talking about, with no prove to show for it.  Alfa/beta particles being emitted, sorry to disagree.  Who has done a test of radiation emitted from the Kapanadze/Akula devices? NO One... So, I think that you're barking up the wrong tree.
  If Tesla were here, he would probably not agree with that train of thought, either.
 
   Earth Magnetic resonance derived from the Aether, and from the power of the Earth vortex, is a different matter. And is what Akula, Kapandze and others attributed as the source extra energy.  Implosive vortex energies. Not explosive, destructive, and dangerous man made sources of energy derived from nuclear decay.

   Haven't we been through this before? 
 
« Last Edit: April 01, 2015, 06:08:25 AM by NickZ »

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8199 on: April 01, 2015, 03:34:49 PM »
Hi there guyz :)

Back again for a while,
First thing want to inform that Ruslan succeeded with his next replication :) . Bravo.

https://www.youtube.com/watch?v=RYjPLRQunGk&feature=autoshare

Be patient He will show you it working! :) , just a tap of 12V only.

Lost_bro,
 You are so close to make it work as how akula and Ruslan has. Saw your vids, Nice man, keep it up!
Those pulses are the key. but bit hard part is where tuning comes in.

Magpwr,
Nice testings man, And yes about the info about the ground , currents going thru ground, yes that needs to be achieved.
part of the Essential key to all of this :) . Keep it up.
Thnx to go back into tesla's words, many hints.
Ofcourse, the more input, the higher output for sure but, we know we could go from small input and after reaching resonance it's multiplied
many times.

Remember We need to reach the Resonating point and Sync of Waves. Key 2.

integrated circuit is the only way out with this, start with  TL494's and more.. You have to need them in order to make these systems work.
But take my advice with the pics also that I provided as I tested it already ;) .
Reach Resonance with the cap and the cap will reach a constant mass descharge pero mili second or nano second pulse.
Light will blink so fast you wont realise it!.
Resistance is Power.

Cheerz~

Hi Geo,

You are again coming across as a guy who has achieved self running and is trying to guide others. Is this the case? If so, please show us some evidence.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8200 on: April 01, 2015, 04:23:13 PM »
  As it's been very dry here, my two Earth ground line have not been working as well as expected. The third shorter (5 meter) ground line did not work at all, unless I pour water on it. But, last night it rained and I'll give it another shot at it, now that every thing is wet.

   Geo: We've been patient, but you did mentioned that you would show what you've got going, so please don't tease us. If you don't have anything working properly yet, including your micro/nano pulser, just say so. But, don't make it sound like you know the secret to a working self runner, yet, you never show it.
   To refer us to other videos or replications, is good, but it means that Hoppy was right about you from the beginning, (no self runner),   so,  prove him wrong.
  We've all heard the ideas of how these devices can work, or should work. Ideas, but with no working replications to show for it, doesn't help much to convince anyone.
  I've been at this for 1 1/2 years now, on my version of the first and second Akula device, and also Ruslan's replications and versions of the Akula second device.
 And I'm still at it. So, help us if you can, but don't tease us about awesome power, etz...
  What awesome power???

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8201 on: April 01, 2015, 05:25:16 PM »
   T-1000:
   And from what I've seen...   There is no NMR in these devices, at least not the kind some of you guys are talking about, with no prove to show for it.  Alfa/beta particles being emitted, sorry to disagree.  Who has done a test of radiation emitted from the Kapanadze/Akula devices? NO One... So, I think that you're barking up the wrong tree.

Everyone have own opinions and I would not argue with that. Just if you would understand what at least Ruslan and akula was telling in Russian language there would be different discussion.
Also if the build would be done as I see it this part could be rectified.... There is no OU from simple closed circuit without external process providing energy into it no matter how you do it.

P.S> As a side not there is new vid from Ruslan - https://www.youtube.com/watch?v=ZTpTytGIMBg
He could not get twin tesla coil device self running in beginning and shows some live tuning before it self runs again..

Cheers!

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8202 on: April 01, 2015, 05:52:09 PM »
   T-1000: "
   In the video of the first Akula device, which Wesley translated, there Akula mentions ("I tell you a secret"), where he mentions where he thinks that the extra energy is coming from, "EARTH Magnetic Resonance".   Later on he may have sided or been persuaded with the open discussion being tossed around about NMR. So, he may have hopped onto that idea, but with no proof to back it up. No tests for radiation were done at that time, or yet, as far as I know.
   What part of this is it that I don't understand, as I don't speak Russian? 
   
   T-1000, would you rather work with a device that is spewing out poison (NMR), or one that works with safe and available surrounding ambient energies? I know which one I would chose, and who's ideas I would follow.... Tesla.
 
  My father was a nuclear scientist, born and educated in Yugoslavia, with same basic concepts and ideas as Tesla. 
Yet, he worked for years in the U.S. for the GE nuclear reactors research and development facility in Calif.
   
   I chose to be safe...  NO NMR  for me, thanks. But, I'm open to your thoughts about it as well.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8203 on: April 01, 2015, 06:01:39 PM »
Nick,

Speaking of Tesla he did pretty same thing with http://www.tfcbooks.com/tesla/1899-03-15.htm as you see in Ruslan video.
Interrupting spark ( which is resonant in Tesla coil) then repeating cycle is done in electronics. Tesla did this in mechanical way.
If you will succeed in repeating at least that setup with 2 Tesla coils where you have transmitter running on bursts of resonant pulses and the second coil having its secondary attached in series to 300V step up transformer from inverter (also same voltage from other winding goes to transmitter coil primary over MOSFET) before it goes to the load over rectifier (due long wires resistance to high frequency) then there will be practical discussion. Just be warned, this setup radiates well and the headache is one of quickest symptoms...

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8204 on: April 01, 2015, 06:47:15 PM »
  Head-ache?  I've spent hundreds of hours next to my device. No health problems to report. But, then I'm not using two signal generator, both connected to the grid, and both grounded to the grid ground.

   The newest Ruslan device is a big clunker, lighting only two CFL bulbs, at least he got it self running. That's a start. 
But, I won't try to replicate that device, at least not yet. 
 
   The Dally device that Ruslan first came out with didn't need all the HV, HF spewing all around, and didn't need a big open air antenna, either. 
   The further apart the primary of the Kacher is from the Hv secondary coil, the further the HV waves can extend out from the antenna coil. The closer the Kacher primary is to the secondary, the Hv waves don't extend out very far. At least that what I've noticed.  Ruslan's 2300 watt output unit, worked the best, so far.

   My feelings are that in replicating the third (low power) Akula device, Ruslan is following down him down the wrong road.
   I'm waiting to see what they come up with next.