Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719538 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6345 on: November 02, 2014, 04:51:32 PM »
  I've rewound my grenade, hopefully the right way, and will install the 12,12, turn inductor coil on top of the bigger output coil today. This inductor needs to be wound the same as the 1st, and 2nd turns of the bigger coil, I take it.  So, that is what I'll do.


  Although it may look like it, but Ruslan is not replicating the Akula second device exactly as Akula has it. There are mayor differences, as he is testing different ways to go about it. And also each new circuit diagram is different, from the previous one, so which one to follow?
Look at this Ruslan video again, which was previously posted by Hoppy.
https://www.youtube.com/watch?v=o6OvRcVPPlY&list=UU_zn0cdzv_qfsxQUm4e7R9w

  Ruslan is explaining many things in the video above, but I don't understand most of it. Maybe someone can point out any important details to consider.  As this is his best most explicit video showing all of the components which are inside both of the junction boxes. Not like before.

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6346 on: November 02, 2014, 05:30:48 PM »
Hi Guyz

  URFA ,
Awesome work man, you are almost there, try know to feed your PSU and filter it with cap to see results when you feel like it. ;)
I have the same results when applying hand or bulb near the antenna, will down freq. and you will hear it and brightness also changes.
Keep us posted, Nice work.

 Hoppy, magpwr ,John.K1
Nice work on the Coiling and showing progress guyz,  Hoppy did you manage to light up some light with it yet? the built is very nice.


Gonna share a link and schematic I saw yesterday, very interesting but this is how I tried mines out to first.
I think he drew the bifilar wrongly , should be the Tesla bifilar there but you never know.
Negative rail of Kacher to onside of capacitor of 3winds to bifilar and to grenade coil. is important here.
 
It reminds me on how the 1st akula Tech was build for only using  the Push pull  TL494 with the 3 winds on ferrite yoke and bifilar inductor for power amplification on coils.
In any case I have attached a Vid on youtube, and the schematic of what this guy is using of the Ruslan grenade device we are currently work on.
It's lighting up 400W halogen.

https://www.youtube.com/watch?v=Z6Vr4Gt8g9o



itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6347 on: November 02, 2014, 05:56:12 PM »
Itsu, can you show that scaning picture with 900 kiloherc resonance? And can you scan inductor wounded on granate (better 11 meters lenght, than 18 meters)?

Ok,  here the video i made the about the bifilar coil around the grenade.

https://www.youtube.com/watch?v=C4kz3qf0lns&feature=youtu.be

The video about the 11m bifilar coil is not similar as it was a standalone coil,  not interacting with another like this one now.

Regards Itsu

 

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6348 on: November 02, 2014, 08:40:14 PM »
  Geo:
   I watched the video that you posted the link to. What it shows is that the Tesla Bifilar way to wind the 12, 12, or the 25, 25 turn inductor coil on the air core can be made to work, either way.
  The first Akula device just pulsed the yoke's 3 turn coil through the capacitor to  the inductor coil which was wound on top the big air core coil. Similar to the video you posted. This was without the 28 turn air coil, as is used now. But, this way if used by itself, is not a self runner, only an inverter crt, if there is no feed back path.
  The first Akula video used a feed back coil on top of the big air coil, connected to the full bridge rectifier, and filter cap, and then back to the power supply unit, to supply the self running input. Without this is it would also just be another an inverter crt.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6349 on: November 02, 2014, 10:40:07 PM »
Ok,  here the video i made the about the bifilar coil around the grenade.

https://www.youtube.com/watch?v=C4kz3qf0lns&feature=youtu.be

The video about the 11m bifilar coil is not similar as it was a standalone coil,  not interacting with another like this one now.

Regards Itsu
can you measure the resonant ends of the grenade with 2 scope probes?  and attach their ground to a higher point in the ground?  Also attach the ground braid to one side and the other.
Should find different resonant frequencies...but I think that cause you're on the differential of the coil itself that they are hiding....

cyan and yellow dots are scope probe points

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6350 on: November 02, 2014, 10:41:42 PM »

 Hoppy, magpwr ,John.K1
Nice work on the Coiling and showing progress guyz,  Hoppy did you manage to light up some light with it yet? the built is very nice.


Thanks Geo. Yes, I can light a 10W mains lamp but its early days for my tuning. I've spent some time today knocking-up a basic 24V / 10A  transformer based power supply for testing purposes. Its just a 18V / 16A toroid transformer, FWBR and 10,000uF smoothing cap.
« Last Edit: November 03, 2014, 08:51:53 AM by Hoppy »

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6351 on: November 03, 2014, 02:40:34 AM »
Hi Guyz

  URFA ,
Awesome work man, you are almost there, try know to feed your PSU and filter it with cap to see results when you feel like it. ;)
I have the same results when applying hand or bulb near the antenna, will down freq. and you will hear it and brightness also changes.
Keep us posted, Nice work.

 Hoppy, magpwr ,John.K1
Nice work on the Coiling and showing progress guyz,  Hoppy did you manage to light up some light with it yet? the built is very nice.


Gonna share a link and schematic I saw yesterday, very interesting but this is how I tried mines out to first.
I think he drew the bifilar wrongly , should be the Tesla bifilar there but you never know.
Negative rail of Kacher to onside of capacitor of 3winds to bifilar and to grenade coil. is important here.
 
It reminds me on how the 1st akula Tech was build for only using  the Push pull  TL494 with the 3 winds on ferrite yoke and bifilar inductor for power amplification on coils.
In any case I have attached a Vid on youtube, and the schematic of what this guy is using of the Ruslan grenade device we are currently work on.
It's lighting up 400W halogen.

https://www.youtube.com/watch?v=Z6Vr4Gt8g9o

Hi Geo,

Thanks for posting this circuit diagram.This looks more logical esp at ground connection after 100uh common mode choke at tesla driver circuit.The transistor emitter for tesla coil is connected to ground wire directly.

skywalker66

  • Full Member
  • ***
  • Posts: 182
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6352 on: November 03, 2014, 07:29:52 AM »
Ok,  here the video i made the about the bifilar coil around the grenade.

https://www.youtube.com/watch?v=C4kz3qf0lns&feature=youtu.be

The video about the 11m bifilar coil is not similar as it was a standalone coil,  not interacting with another like this one now.

Regards Itsu

Hi Itsu!

After winding inductor coil, now you have 2 coils with 2 different resonant frequency, therefore the response at signal generator stimulation will be a combination of the two frequencies. A very nasty business...
For finding new frequency, you may try this:
1. Connect a 0.47uf across your inductor, and put to ground the upper leg of inductor. This will disable the influence of free oscillating of inductor on resonant freq. of grenade.
2. Put your test coil from FG across 6-th layer of your grenade.
3. Put oscilloscope ground to upper leg of grenade, and between scope probe and lower leg put 100k resistor, scope probe set on 10x - for keeping as minimum as possible influence of probe's capacity on resonant freq. of grenade
4. Sweep FG for max. amplitude on oscilloscope. You will find new freq. somewhere between 1.6 - 1.8 MHz. That will be the freq for kacher shutting of.

I hope this will help.

PS: This is just a theoretical speculation of mine, and get as such.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6353 on: November 03, 2014, 09:19:26 AM »
can you measure the resonant ends of the grenade with 2 scope probes?  and attach their ground to a higher point in the ground?  Also attach the ground braid to one side and the other.
Should find different resonant frequencies...but I think that cause you're on the differential of the coil itself that they are hiding....

cyan and yellow dots are scope probe points

Thanks  d3x0,

it will be hard to do as my ground high point is not near my bench, so have to look into it.

Regards itsu


itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6354 on: November 03, 2014, 09:24:04 AM »
Hi Itsu!

After winding inductor coil, now you have 2 coils with 2 different resonant frequency, therefore the response at signal generator stimulation will be a combination of the two frequencies. A very nasty business...
For finding new frequency, you may try this:
1. Connect a 0.47uf across your inductor, and put to ground the upper leg of inductor. This will disable the influence of free oscillating of inductor on resonant freq. of grenade.
2. Put your test coil from FG across 6-th layer of your grenade.
3. Put oscilloscope ground to upper leg of grenade, and between scope probe and lower leg put 100k resistor, scope probe set on 10x - for keeping as minimum as possible influence of probe's capacity on resonant freq. of grenade
4. Sweep FG for max. amplitude on oscilloscope. You will find new freq. somewhere between 1.6 - 1.8 MHz. That will be the freq for kacher shutting of.

I hope this will help.

PS: This is just a theoretical speculation of mine, and get as such.

Thanks Sky,

i can try that, at the moment tuning with a ferrite rod inside the Kacher secondary (like Magpwr suggested), but no sign of
my 2x 60W bulbs getting any brighter, so need a more defenitive frequency to set my Kacher.

Regards Itsu

skywalker66

  • Full Member
  • ***
  • Posts: 182
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6355 on: November 03, 2014, 09:39:48 AM »
Thanks Sky,

i can try that, at the moment tuning with a ferrite rod inside the Kacher secondary (like Magpwr suggested), but no sign of
my 2x 60W bulbs getting any brighter, so need a more defenitive frequency to set my Kacher.

Regards Itsu

No need bulbs yet. Just find the new freq. of your grenade with the inductor on it as I suggested above.
After that, tune your series resonance (3 turn + capacitor + inductor) on Freq. grenade / 50 by choosing apropriate cond for series resonant circuitry. Then tune kacher using whatever method is suited for you to match  grenade freq.

skywalker66

  • Full Member
  • ***
  • Posts: 182
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6356 on: November 03, 2014, 10:10:49 AM »
@ Itsu

Basicaly as I've understand there are two main frequencies:

1. Grenade natural freq must match kacher freq.
2. Series resonant circuitry = F grenade / 50. Push-pull driver must drive yoke on this freq.

PS. With 3 layer inductor, coil assembly look too bulky than what I see in all Ruslan's videos. I'm convinced Ruslan use just 2 layers (Tesla mode), and  18.5m for inductor is obvious not true, maybe 1/4 from grenade length, but not 1/2.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6357 on: November 03, 2014, 10:52:40 AM »
@ Itsu

Basicaly as I've understand there are two main frequencies:

1. Grenade natural freq must match kacher freq.
2. Series resonant circuitry = F grenade / 50. Push-pull driver must drive yoke on this freq.

PS. With 3 layer inductor, coil assembly look too bulky than what I see in all Ruslan's videos. I'm convinced Ruslan use just 2 layers (Tesla mode), and  18.5m for inductor is obvious not true, maybe 1/4 from grenade length, but not 1/2.

I agree, but 1/4 would be only 9.3m.    I keep it in mind, if other tuning methods do not yield any success.

Regards itsu 

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6358 on: November 03, 2014, 11:01:45 AM »
Thanks Sky,

i can try that, at the moment tuning with a ferrite rod inside the Kacher secondary (like Magpwr suggested), but no sign of
my 2x 60W bulbs getting any brighter, so need a more defenitive frequency to set my Kacher.

Regards Itsu

Hi itsu,

Only the divide by 60 pwm circuit i have created and posted would be dependent on tesla coil.To easily find resonance  of capacitor in series with 3 turns just apply signal generator in series with 1kohm resistor with circuit as shown in my video part 1.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6359 on: November 03, 2014, 12:16:36 PM »
Hi Void.
In fact you know everything about my setup. I used Ruslan's schematic. He drew in his video. His scheme was published by Enjoykin and GeoFusion.It was posted a few pages ago in this forum.
In my setup.

Hi guys, its been a while since my last post. I can safely state that tuning is a real pain in the ass. Or even better, tuning is a beach! :D

Well, Skywalker is very close but in practice it is even more difficult. You have two different lines, with different self frequencies interacting between each other. That means that by winding your inductor you have to find the gold point where both lines are ringing together to the same frequency. You test each line by each time disconnecting the other. If you are wavelength matched between the lines, then start unwinding your inductor turn by turn until to reach this gold point. The better way for watching the results is to first tune both lines to a same low KHz frequency, and then by attaching your probe in parallel with the tuning caps just sweep and see the high frequency peaks and ringing. When you finally match them put them both in line and measure inductively the common frequency vibration by placing your probe as a two turns receiver around both coils (thin side). All this calibration is without ground in place. Ground is a third line which also needs synchronization as it also has its own ringing which have to be matched. And no. What ever ringing you will measure at the ground line is not a telluric current. It is the self oscillation of the ground cable. If you attach it in place and your previous interaction frequency doesn't change, then you are fine.

Ibrahim Urfa!
What can I say about you my friend! Even a big bravo is not enough. You made your first steps on the other side... well done! I just have a question. I saw in practice that even with a well balanced and tuned system things are not getting easier. I mean, I use the same ruslan's drawing but I can't trap radiant energy inside my coils system. I will keep trying in case that I overlook something, but I feel that something is missing from the drawing. Is that true? Or it is just a matter of correct coils orientation and winding directions? Just a yes or no would be enough for us to look to the right direction for an answer.
 
Thanks Jeg