Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718825 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6285 on: October 30, 2014, 03:15:08 PM »
  a.king:
  Thanks for mentioning about substituting the long ground wire connection for the car battery negative post.  I remember you mentioning this before.
  I am also working with the Slayer type "Exciter" circuit, for my Akula second video devices. It will be interesting to hear about of your future tests with it.
 
   Mag: Tesla NEVER mentioned "electrons" as being the source of power for his running his devices. 
   I also don't believe that electrons even exist, as is still being taught to this day.
   Tesla mentioned Aether as the source, and that the capacitor is what separates the positive and the negative aspects of it, to be used for conventional purposes.

  All: Notice how Vasmus is using a bank of caps, plus a small inductor coil, and pot to control and tune the frequency of his device. Also, a short 5 meter ground connection.

  I think that it would be a good suggestion for Akula or Ruslan to try the car battery ground post idea, instead of their long ground. But, as with ham radio antennas, a circuit can possibly replace the long ground wire, to some degree.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6286 on: October 30, 2014, 04:01:51 PM »
Here is the my experiments video

Hi Urfa. With no detailed explanation of what you are doing, it would be pretty hard for
anyone to be able to properly assess what is happening in your videos. Too many unknowns.
In the very least details on power consumption of kacher and push pull driver circuits are needed,
plus wattage of the light bulbs.

All the best...
« Last Edit: October 30, 2014, 09:53:20 PM by Void »

MenofFather

  • Hero Member
  • *****
  • Posts: 943

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6288 on: October 30, 2014, 08:15:05 PM »
Here is the my experiments video

https://www.youtube.com/watch?v=AzY_niD918k&list=UUhIbi3zJRgVevvZK1K-Wc_w

https://www.youtube.com/watch?v=hZSRkMty_ZU&list=UUhIbi3zJRgVevvZK1K-Wc_w

Hi,

You need to get disconnected from the  mains grid first. Please use disconnected computer UPS or battery for power supply. With mains connected there is no effect as the system is supposed to reach ground over grenade coil windings only...

Cheers!


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6290 on: October 30, 2014, 10:58:54 PM »
  In URFA's first video, (of the two), he can't touch the Kacher's output wire with his hands, like Akula can, though he can with the wire from the yoke, (if that is where it's going to).  Also his HV streamers are pretty intense, and clearly light the bulbs up much brighter,  but still, it's only just and inverter crt, not self running.  So far...

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6291 on: October 31, 2014, 12:16:11 AM »
Guys, some question here. On the picture below is my basic structure of the device.  I have it a bit different than Ruslan.or my Tesla coil  I used 0.3 wire separated with the sawing threat and varnished. If the principle is based on the Ionization of the air I think the surface matter. My Tesla is long 30 cm ( Ruslan has around10 cm) and it is a half wave of 1.87 MHz- which is my bifilar"grenade" coil. My question is - does it matter in what direction is wound primary of the Tesla??  I believe not, just want to make sure. May be somebody has experience already with that.  My next question is that opposite  wound coil right behind the Tesla coil. If I have my all Tesla already wound in that direction do I have to put that extra wire there and in what direction if my Tesla is wound in opposite to Ruslans? 

Thanks,

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6292 on: October 31, 2014, 02:43:25 AM »
hi everyone,

I have produced another findings which will erase anyone lingering doubts related to "the point of waveform which nanosecond pulse needs to be injected or pulsed".

After watching the Ruslan video with the nanosecond pulse injection and verifying with my previous attachment as attached once more shown with 2 example red line as example which represent the nanosecond pulse.


Пояснение по работе генератора (4)
http://www.youtube.com/watch?v=C8RcRlzk16w

I have now 100% confirmed the point in the waveform which the nanosecond would need to appear which is at "the positive peak cycle of the lower harmonics as example 26.83khz "as shown in my attachment.This nanosecond pulse as shown in the red line is also in in sync with "the peak of negative half cycle" of the tesla coil oscillating at around 1.6Mhz as example.
Similar to Ruslan screenshot as pasted.


My justification related to scope time/div as referring to the Ruslan screenshot as pasted with my waveform  is simple.By placing probe near tesla coil oscillating at
example 1.6Mhz the time per division setting on the scope would be at 500ns per division.

To find out the estimated "nanosecond pulse width duration" as shown in Ruslan screenshot as attached.This can be observed easily by comparing the narrow pulse signal which looks
like around 100ns to 150ns compared against 500ns per division setting on scope. :)

"At this point i have once again proven the need for nanosecond pulse  injection without going into the details like why it is needed"


At least this time i clearly know now where in the device nanosecond injection for the device is to be done.This is the small toroid which one of the wire from 3 turns of yoke or toroid going through.
Toroid material selection is very important eg:3000HM or etc.

Why i used 60th harmonics instead of 50th harmonics as used by Ruslan.Because Akula have already mentioned in video which i have attached recently about the ideal frequency alignment
which i found for old device Akula was using 30th harmonics and later on 60th harmonics for the current device.
-----------------------------

Some of you may observe by now my style of doing things is about getting all the facts right to nearly 100% before even considering to proceed with actual replication.

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6293 on: October 31, 2014, 08:02:45 AM »
MagPwr, how did you find Ruslan is using 50th harmonics?  In his Skype conference he said to lads to use 100yh harmonics ( 20KHz if 2MHz system).

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6294 on: October 31, 2014, 08:35:04 AM »
MagPwr, how did you find Ruslan is using 50th harmonics?  In his Skype conference he said to lads to use 100yh harmonics ( 20KHz if 2MHz system).

hi John.K1,

Just use the attached harmonics calculator and insert the figure from tesla coil or yoke frequency .It is divided into 2 section harmonics or sub-harmonics.

This excel was not created by me it was found somewhere the internet.Just use free excel viewer if you don't have Microsoft office.

I have inserted the figure 20000 hz (Under Harmonics section)  and 2000000hz (Sub-harmonics section).

Just Scroll down and see he is using 100th Harmonics.

If you try be it 50th or 100th harmonics the lower frequency eg:20khz and upper frequency 2Mhz  will never be aligned.

If you don't believe me just use your signal generator set it at 20khz sine wave and made this waveform appear bigger in scope by playing with voltage and time setting.

Then save this waveform if your scope allows this.

Then set signal generator at 2Mhz sinewave and make sinewave appear smaller in scope and try to make it aligned.

And see if you can do it at 50th or 100th for Ruslan.

-----------------------
Then try 30th or 60th harmonics Akula version as per calculator and see if you can get both waveform aligned.

---------------------------
Do you want 2KW or 400watt on your first try without wasting too much time?


The perfect alignment as describe by Akula in old video.Please dig for it.Base on my posting just less than 1 week back


---------------------------------------

If 10 new members come to forum do i have to repeat 10 times to each new member to get my points across.

I promise i shall no longer teach about harmonics after  you.
« Last Edit: October 31, 2014, 12:12:43 PM by magpwr »

URFA

  • Jr. Member
  • **
  • Posts: 70
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6295 on: October 31, 2014, 08:45:44 AM »
Hi Urfa. With no detailed explanation of what you are doing, it would be pretty hard for
anyone to be able to properly assess what is happening in your videos. Too many unknowns.
In the very least details on power consumption of kacher and push pull driver circuits are needed,
plus wattage of the light bulbs.

All the best...

Hi Void.
In fact you know everything about my setup. I used Ruslan's schematic. He drew in his video. His scheme was published by Enjoykin and GeoFusion.It was posted a few pages ago in this forum.
In my setup.
Power consumption of kacher: 24 V  1.8-2 A
Power consumption of push pull driver circuits: Without kacher 24V 2A but I measured when kacher runing Its power consumption is growing about 24V 7-8 A.
Power consumption of kacher and push pull driver totally 9-10A(24V)
I have 4x40w and 1x100w  220v light bulbs. Totaly 260w and When kacher run they are fully brightness.
My setup not OU.I only share this video with you to show the effect of Kacher. I'm still working on this system like you.

Note: I can not fully express myself Because of my bad english :'(

All the best..

URFA

  • Jr. Member
  • **
  • Posts: 70
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6296 on: October 31, 2014, 08:48:57 AM »
Then you addading kacher lamps shine brighter?

Hi MenofFather.

Yes. When I adding kacher lamp brightness increases.

URFA

  • Jr. Member
  • **
  • Posts: 70
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6297 on: October 31, 2014, 09:06:58 AM »
Hi,

You need to get disconnected from the  mains grid first. Please use disconnected computer UPS or battery for power supply. With mains connected there is no effect as the system is supposed to reach ground over grenade coil windings only...

Cheers!

Hi T-1000

I want to reduce the power consumption of the my device a little more. I know my device's power consumption is high for OU. I think when I disconnect main grid this setup it will not work. After some more experiments I'll do what you say  ;)
And Ruslan says about my setup on Realstrannik forum:
Ruslan Says:
На видео есть реальные шансы системе заработать. Но очевидно не правильно сделан съём энергии. Потому нет самозапита. КПД виден и чувак близок к успеху на 90%
google translate:
In the video, there is a real chance to earn system. But obviously not done correctly will eat energy. Because no samozapita. Efficiency and seen dude close to success by 90%

Regards

All

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6298 on: October 31, 2014, 10:16:16 AM »
Hi T-1000

I want to reduce the power consumption of the my device a little more. I know my device's power consumption is high for OU. I think when I disconnect main grid this setup it will not work. After some more experiments I'll do what you say  ;)
And Ruslan says about my setup on Realstrannik forum:
Ruslan Says:
На видео есть реальные шансы системе заработать. Но очевидно не правильно сделан съём энергии. Потому нет самозапита. КПД виден и чувак близок к успеху на 90%
google translate:
In the video, there is a real chance to earn system. But obviously not done correctly will eat energy. Because no samozapita. Efficiency and seen dude close to success by 90%

Regards

All


hi URFA,

I was impressed by your video but at quick glance i have also spotted 2 mistakes.

Please avoid using full-bridge rectifier module at cost although it looks like most easy solution.I have already discussed about this previously that this module is only designed for mains frequency 50/60hz.

The catch is if you try to try at higher frequency in khz range this module won't able to deliver the same Amps as it was rated for.Do check all full bridge recitifer datasheet and it is very rare to spot a module
which can support higher frequency.

Please assemble using diodes like UF5408 3Amp x 2 in parallel for each side to form full-bridge rectifier as an example.

Another previous discussion the full bridge diodes or module inside the 24volts power supply may need to be altered to cater for the high frequency.

Thanks for the video.Keep it up.


skywalker66

  • Full Member
  • ***
  • Posts: 182
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6299 on: October 31, 2014, 10:48:24 AM »
@  magpwr

In his video seems that full bridge is not use, I meant it is just connected at input side through an series capacitor (single brown one), but the rectified output is left free. Just another capacitor across output for filtering purpose, but not loaded, at least like I see from video.