Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11716080 times)

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6225 on: October 28, 2014, 02:24:25 PM »
HI

Most important thing in Ruslan device are MOUSTACHES :D .It is Ruslan's term !!
This device will work only when both MOUSTACHES ARE IN PHASE. Find way to grow up these SPECIAL BIG MOUSTACHES and phase it with small MOUSTACHES :D

Oscilloscope probes are on BIG MOUSTACHES (before diode bridge) and SMALL MOUSTACHES (current transformer at end of Grenade coil). Rectified voltage on 1uF capacitor is 800V

Ruslan is experimenting every day to get more than 5KW power.
« Last Edit: October 28, 2014, 10:58:25 PM by Enjoykin »

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6226 on: October 28, 2014, 02:36:08 PM »
Hi Hoppy. Don't take the Google translations as very exact. Sometimes it comes out with some strange words. ;)
Akula was talking about the two opposing windings on the ferrite rod between the tesla coil and the
'antenna'. Akula seems to have been saying that he thinks this 'choke' (translated as arrestor?) could produce voltage
spikes in the range of 36,000 volts or so, from what I could understand anyway. I did not see anything like
that so far in my own testing with such a choke however. Maybe it is of such short duration that my scope doesn't
pick anything up.
All the best...

Yes, the late Stanley Unwin comes to mind - deep joy.  ;)

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6227 on: October 28, 2014, 07:41:52 PM »
Were pulses can be, were Ruslan looking in video. On red big dots Ruslan can be puting ends of oscilioscope, here is pulses.
 :)

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6228 on: October 28, 2014, 08:06:57 PM »
Hi MenofFather.

Watching your schema and with respect to what Ruslan said the granade coil is conected wrong on your picture (it is vice versa)  Last end - longest one - is going on the ground and the very first end is going on TV choke (through the  0.47 cap)  Tha's what Ruslan said.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6229 on: October 28, 2014, 08:12:53 PM »
Hi MenofFather.

Watching your schema and with respect to what Ruslan said the granade coil is conected wrong on your picture (it is vice versa)  Last end - longest one - is going on the ground and the very first end is going on TV choke (through the  0.47 cap)  Tha's what Ruslan said.
Ground can be conected to botch ends. I put schematic of firsrt Ruslan divice (12 volts system). You speaking about second divice (24 volts system). In 12 V system conected like in schematic, which I put. In conference Ruslan say, that conected to like you say and maybe that is in 24 volts system. Modernization by Ruslan...

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6230 on: October 28, 2014, 08:40:46 PM »
Thanks MenofFather. If you know, can you tell me please what is that small coil- couple turns in opposite direction, right behind the Tesla for? I am not talking about the coil on the ferite rod. 

Thank you.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6231 on: October 28, 2014, 08:46:04 PM »
Thanks MenofFather. If you know, can you tell me please what is that small coil- couple turns in opposite direction, right behind the Tesla for? I am not talking about the coil on the ferite rod. 

Thank you.
I not understand. "A" is antena in by me posted schematic.

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6232 on: October 28, 2014, 08:56:54 PM »
Meno,  It is not in your schematic. But if you watch one of his videos, he has on the tube - Tesla , after there are some turns in opposite direction (he clearly state that, also small gap between tesla and this coil) and then, this is connected to the coils on ferrite bar.  I didn't find more info about this anywhere.   His opposite coil is under the red tape.

Thanks.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6233 on: October 28, 2014, 09:34:50 PM »
HI

Most important thing in Ruslan device are MOUSTACHES :D This device will work only when both MOUSTACHES ARE IN PHASE. Find way to grow up these SPECIAL BIG MOUSTACHES and phase it with small MOUSTACHES :D

Oscilloscope probes are on BIG MOUSTACHES (before diode bridge) and SMALL MOUSTACHES (current resistor at end of Grenade coil). Rectified voltage on 1uF capacitor is 800V

Ruslan is experimenting every day to get more than 5KW power.

Hmmm, more confusion, what do you mean by "before diode bridge" as in the drawing from MenofFather?
And "Rectified voltage on 1uF capacitor is 800V". What 1uF capacitor? There is none.
And 800V!?  The scope shows 10V/division, so i can see max. 100V.

I have tried to measure these points, but the signals seen are in no way compareable with what i see in those scope screenshots.

Yellow is between diode bridge and choke, negative 60V (same is in MenofFathers diagram red spot)
Green is my current probe (set at 500mA/div) at the exit lead from the grenade coil to 10uF cap/bulbs/ground.

Regards Itsu

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6234 on: October 28, 2014, 11:05:59 PM »
Hmmm, more confusion, what do you mean by "before diode bridge" as in the drawing from MenofFather?
And "Rectified voltage on 1uF capacitor is 800V". What 1uF capacitor? There is none.
And 800V!?  The scope shows 10V/division, so i can see max. 100V.
I have tried to measure these points, but the signals seen are in no way compareable with what i see in those scope screenshots.
Yellow is between diode bridge and choke, negative 60V (same is in MenofFathers diagram red spot) Green is my current probe (set at 500mA/div) at the exit lead from the grenade coil to 10uF cap/bulbs/ground.

Regards Itsu

Hi Itsu

No need for confusion Itsu. MOUSTACHES are Ruslan's term.  :D
Ruslan has measured BIG MOUSTACHES voltage at bifilar coil (inductor). One end of bifilar was grounded. SMALL MOUSTACHES are current signal at current transformer from grenade. He said he was measured voltage on two capacitors 2x0.47uf = 1uf and it was more than 800V rectified. Signals are not comparable with yours because your setup is wrong. Load is not connected because Ruslan made experiments with phase shifts in circuit. And that Brutto schamatic is not correct. Need to be deleted !!

Frequencies of BIG MOUSTACHES (voltage) and SMALL MOUSTACHES (current) are CORRECT - as on pic above.

Reg.
« Last Edit: October 29, 2014, 01:52:34 AM by Enjoykin »

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6235 on: October 28, 2014, 11:11:41 PM »
I tried to find the most logical points on where the latest Ruslan scope shots could have been taken and came up with:

current trace (spiky signal / little moustache) in the main grenade lead to 10uF cap/bulbs/ground (but i only see one peak positive; how come?)
voltage trace (Big moustache from Kacher) on the main grenade between this grenade and the 28 turn yoke secondary

This way we can measure the voltage and the current through 1 coil (main grenade) and see if they align, (meaning in resonance).

First screenshot is without Kacher activated,
second screenshot with Kacher activated.

Video here (where you can also see how i wound my Kacher secondary / choke / antenna):
https://www.youtube.com/watch?v=PMAkYEv2ttI&feature=youtu.be

I tried to find a similar positive/negative spiky signal with my current probe probing on severall places, but none was found! 

It seems i made a mistake on the ferrite choke inbetween the Kacher and the antenna, both 5 turns were in the same direction (CCW),
so i changed that afterwards, but no changes in the above signals where seen.

My Kacher secondary - choke - antenna is now like this:

Kacher secondary 0.6mm wire on 5cm tube 9cm long CW, then 4 turns 4mm wide copper tape CCW.
Ferrite choke 5 turns CW -> 5 turns CCW.
Antenna 5 turns CW

It resonates at 1.760MHz

Regards Itsu

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6236 on: October 28, 2014, 11:14:32 PM »
Hi

No need for confusion Itsu. MOUSTACHES are Ruslan's term.  :D
Ruslan has measured BIG MOUSTACHES voltage at bifilar coil (inductor). One end of bifilar was grounded. SMALL MOUSTACHES are current signal from current transformer from grenade. He said he was measured voltage on two capacitors 2x0.47uf = 1uf and it was more than 800V rectified.
Signals are not comparable with yours because your setup is wrong.

And that Brutto schamatic is not correct. Need to be deleted !!
Reg.

My setup is wrong? Now you tell me   ;D

What is wrong then if i may ask?


Regards itsu

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6237 on: October 28, 2014, 11:20:30 PM »
Did you measured little moustashes (current) with current transformer or maybe with resistor ?

Did you wound your bifilar like Tesla setup or Hooper setup. There is big difference between !!
Lenght of bifilar 18,75m (half of grenade).

This is important - Your second oscillogram at 22.18.43 is very important and very similar to Ruslan.
Watch his video again from 1.04 and compare yourself. He has on top of positive and negative peaks small humps. It means you have significant phase error in your setup.

Picture for compose one's thoughts. :)

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6238 on: October 28, 2014, 11:27:49 PM »
Were pulses can be, were Ruslan looking in video. On red big dots Ruslan can be puting ends of oscilioscope, here is pulses.
 :)


hi MenofFATHER,

It's early morning here.Before i run off for work.There is not much time.

The circuit diagram you have presented is 100% wrong.

This is easy for me to explain.The "voltage drop" across STTH12R06 diode surely cannot be higher than "2volts" even under load.

Please just take a look it's it's datasheet and look at the voltage drop.

Then full bridge rectifier which is consist of 4 diodes assume each diode got a voltage drop of 0.7volts .

In simple words there is nothing useful to be obtain from the full-bridge rectifier except to monitor "frequency" only.This would appear as 2 times ripples of actual frequency. :D

Ruslan have never present a full circuit diagram of his device to date.The block diagram is not useful in this case.
Only Akula have released various circuit diagrams.

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6239 on: October 28, 2014, 11:46:16 PM »
Itsu check phasing at your push-pull ferrite. Both branches with 3 turns and 28 turns.
First change phase on 3 turns coil then on 28 turns and than both.  Reference is Ruslan small moustaches oscillogram. If you can't get look similar like at Ruslan's oscilloscope - change phasing of your bifilar coil. One end should be grounded - that which is connected on resonant capacitor.
We don't know here how Ruslan has wounded his Bifilar coil (inductor) - like Tesla setup ot Hooper setup.

Analyse slope of Ruslan's small moustaches (current). Whqat can you see ?? Yes, very sharp rise and fall times - sharp eadges means very short current impulses did it. It means short time constant - probably 3 turns coil or something similar with short time constant.