Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715562 times)

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5955 on: October 22, 2014, 11:18:21 AM »
Hi Itsu.  :)

Watch Akula videos
http://www.youtube.com/watch?v=fp3sed_eli0
http://www.youtube.com/watch?v=PLs7v6t3QMY

I think both vids were translated !!

Itsu if you did not rewounded your old Grenade coil, save spectra withouth grounding - for yourself. Read all maximum peaks from 0 to 10MHz and compare them with your already given peaks (grounded coil). Then you will see how the "Earth influent" resonant effect. The goal is to catch "Earth response" and find only one earth frequency like Akula did and Ruslan did. Once you catch that frequency (depend of lenght of coil and depend from gound conductor) you can easy make kacher working just on that frequency. It mean you will have support point.

Your oscilloscope and signal generator should be grounded on fully separate ground. (for example Ground 2).

One more thing. You has "kicked@ your LF sinusoide with Katcher impulse amplitue about 1KV. And nothing has happened. Akula has kicked sinusoide with very sharp HV impulse amlitude more than 36 000 Volts. He has burned his HV probe because amplitude have been much higher than 36 000 Voltas.
Maybe more than 50 000 Volts. This is very important tip because proces or processes here have threshold level more than 36 000 volts. Much more. It is only one of many tricks involved in OU effect.

Last tip from Akula today - Earth frequency response (your grounding response) with quality grounding - will be around 2MHz and below 2MHz but higher than 1.5MHz. It will be some Harmonic of Maximum Earth Resonant frequency peaks between 4MHz....7MHz nut not so high in amplitued. Also valid LF resonant frequency must be harmonic of those higher resonant peaks which again should need be used as Kacher support point (or Tesla Transformer support point).  As Akula said it is extremely difficult thing - tuning complete circuit on higher frequences with several simultaneously working interconnected processes. If you failed to find that Earth resonant support point you will not be able to make working generator as Akula said.

Reg.
Best wishes !!

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5956 on: October 22, 2014, 11:33:09 AM »
The diodes and choke in the green box makes the now dc voltage across the bulb go negative compared to ground,  right?
At least it does with me, so ground becomes the more (60V dc in my case) positive side.

Hi Itsu. Ruslan showed it that way on his schematic, but I don't know
that it has to be that way. Ruslan also said and showed on his schematic that you
could use a FWBR as well, and in that case it wouldn't matter. Ruslan showed four rectifier diodes
when he opened up the box. Akula showed no diodes at all in his schematic.
All the best...



magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5957 on: October 22, 2014, 11:55:32 AM »
Hi Itsu. Ruslan showed it that way on his schematic, but I don't know
that it has to be that way. Ruslan also said and showed on his schematic that you
could use a FWBR as well, and in that case it wouldn't matter. Ruslan showed four rectifier diodes
when he opened up the box. Akula showed no diodes at all in his schematic.
All the best...

hi void,

The 4 diodes is form as full-bridge rectifier is to charge the pulse capacitors connected in parallel at 170volts for that device.

Guys most of you will face issue between tesla coil and yoke driver frequency because this 2 frequency is not aligned.

New discovery for me i just found out for Akula he is using 30th Harmonics instead of 60th Harmonics.I just took 55.03khz as per video and applied into harmonics calculator and take a note at 30th Harmonics it will show as 165khz.(No spectrum analyzer needed for this) ;D
Good thing my earlier posted circuit can be switched to div by 30 instead of 60 easily.

It seems Akula was using 30th harmonics and Ruslan was using 60th harmonics.Both frequency are also able to be aligned.

The coil which Akula was using as per video is for the older design.Base on this older video Akula Yoke needs to be driven at "55khz" for 30th Harmonics.This will put more strain on components eg:IGBT.
Akula video #5  translated by Wesley. ( Free Energy device)
 http://www.youtube.com/watch?v=PPHipGkfSAY&list=UU1ZrGlkxBvG9WOwIs2eApLA

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5958 on: October 22, 2014, 11:56:21 AM »
Hi Itsu. Ruslan showed it that way on his schematic, but I don't know
that it has to be that way. Ruslan also said and showed on his schematic that you
could use a FWBR as well, and in that case it wouldn't matter. Ruslan showed four rectifier diodes
when he opened up the box. Akula showed no diodes at all in his schematic.
All the best...


Hi Void,

i think those 4 diodes on his diagram (also visible in my picture with the green box) is not a FWBR configuration, but just
4 diodes in a series /parallel config to distribute the voltage/current.

Anyway, i agree, no such diodes in earlier Ruslan/Akula diagrams   :o

Regards Itsu

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5959 on: October 22, 2014, 11:57:47 AM »
hi guys,
I have just completed designing my Tesla coil to Yoke driver stage with duty cycle control which will be perfectly in sync with the Tesla coil at 1/60 the frequency of Tesla coil.

Hi magpwr. Interesting idea. It may be that the frequency relationships are not really so
fixed however. Based on my own experiments so far I think it may possibly not be so fixed,
but I can't say for certain at this point. What you are suggesting might work however if the frequency
relationship can always remain fixed to a specific ratio. :)
All the best...


Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5960 on: October 22, 2014, 11:59:27 AM »
Hi Void,
i think those 4 diodes on his diagram (also visible in my picture with the green box) is not a FWBR configuration, but just
4 diodes in a series /parallel config to distribute the voltage/current.
Anyway, i agree, no such diodes in earlier Ruslan/Akula diagrams   :o
Regards Itsu

Hi Itsu. I don't know for certain either way of course, but I seem to recall that someone
translated that Ruslan said you can use a FWBR. I think I have it saved to my notes somewhere. :)
All the best...

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5961 on: October 22, 2014, 12:00:24 PM »
P.S. I hooked up a large sheet of aluminium foil to the end of the kacher
secondary with an alligator clip lead to simulate connecting a big antenna coil on the end, and the
frequency dropped to 1.4 MHz. That's a 44% drop in frequency. Using that as a rough guideline,
it would appear that we should need a non top loaded frequency of roughly 3.6 MHz at least to still
hold to about 2 MHz once the large antenna coil is connected.
All the best...


When driven from the Karcher circuit, my frequency rises from its natural resonance of 1.6MHz to 2.0 / 2.1MHz and when top loaded with an ali sheet to simulate the antenna, drops back to around 1.6MHz, so it looks like I probably need to progressively reduce turns once I have the grenade coil and proper Kacher antenna in place. As you say, we need to increase the non top loaded frequency of about 2MHz.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5962 on: October 22, 2014, 12:06:08 PM »

When driven from the Karcher circuit, my frequency rises from its natural resonance of 1.6MHz to 2.0 / 2.1MHz and when top loaded with an ali sheet to simulate the antenna, drops back to around 1.6MHz, so it looks like I probably need to progressively reduce turns once I have the grenade coil and proper Kacher antenna in place. As you say, we need to increase the non top loaded frequency of about 2MHz.

hi hoppy,

The shorcut method is to slowly insert ferrite rod or rods or toroids stacked together in order to slowly reduce "default resonance frequency of tesla coil.Suitable if your tesla coil is already  resonating at higher frequency eg:2.xxMhz
This will speed up discovery time.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5963 on: October 22, 2014, 12:06:24 PM »
When driven from the Karcher circuit, my frequency rises from its natural resonance of 1.6MHz to 2.0 / 2.1MHz and when top loaded with an ali sheet to simulate the antenna, drops back to around 1.6MHz, so it looks like I probably need to progressively reduce turns once I have the grenade coil and proper Kacher antenna in place. As you say, we need to increase the non top loaded frequency of about 2MHz.

That's odd. Your kacher driver seems to be behaving quite differently from mine.
I have a fair bit longer secondary wire than you and I am getting a higher operating
frequency. Maybe a difference in the kacher driver circuit itself. I am using the common
kacher circuit arrangement with two base resistors acting as a voltage divider to set the
bias point on the base. Bottom of the secondary goes to the base. Is that what you are using?
Which transistor are you using? I'm using the 2SC5200.
All the best...


d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5964 on: October 22, 2014, 12:17:36 PM »


if you did not rewounded your old Grenade coil, save spectra withouth grounding - for yourself. Read all maximum peaks from 0 to 10MHz and compare them with your already given peaks (grounded coil). Then you will see how the "Earth influent" resonant effect. The goal is to catch "Earth response" and find only one earth frequency like Akula did and Ruslan did. Once you catch that frequency (depend of lenght of coil and depend from gound conductor) you can easy make kacher working just on that frequency. It mean you will have support point.

Your oscilloscope and signal generator should be grounded on fully separate ground. (for example Ground 2).

Reg.
I did that some weeks back now; then my coil should be only 835 Khz, with ground connected to the wire through the coil (to top layer of grenade).


I dunno, in the beginning, it seems that the grenade was not connected to the yoke?  wasn't it just an inductive and ground and output power on the grenade?


----
nte327 doesn't work with 5V zeners.  the voltage swing just isn't enough or something... but then it gets +/- LOTS of volts on the gate and collector.


using a variable resistor I'm able to tune a good voltage for whatever resonance the coil has sorta... with also the grenade connected to a load to ground and to ground there's self osillations so I just have to start it and it continues; around 900Mhz... 856; 835... depending on load arrangement.
So I can get power from the kacher/antenna to the grenade and to a load... but right now adding the low frequency oscillator is a destructive interferance... but I have a slight difference in frequency....


my low frequency is in an audible range of 2-6khz... 2khz drive, 6khz resonance pulse width with like a 100nF cap on the cuff... so it drives 1/4 of the wave, and the resoance is a full wave after the drive...
but when I add the kacher it lowers the frequency... and I'm not sure why; I wouldn't think the 555 timer would be affected itself... I guess I need a filter on the mosfet;


on a 1 turn 50k potentiometer there's a small range (a degree or 2) that the current draw is about 0.30; which is a strong signal, slightly lower resistance and current draw can go up further; at not much further the transistor is basically on... can be tuned to work with (bad resonances?).  like at certain points just have to tickle it with a resistor and it picks up and runs itself.
The mutual induction from the pulsed square wave to the yoke and then to the grenade should also be able to tickle the start condition of the kacher...


tried adding a secondary primary which I drove with my signal generator, so I could get it to a higher frequency resonant point, and see if I could tune the resistance to the base so it would trigger there... which almost worked; but ended up with like 1/4 hits which developed further into a 1Mhz wave from 4... which ended up being about 900.


I should try this other 2sc variant; just been confortable with this one, knowing I was hitting it with high voltage and it lived before, until over currented


----
Edit: Oh the zeners; I can also tune the resistance to work with a resonance with zeners, but it ends up being about 436-500Khz.... which is another half frequency; and not able to get as much power out.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5965 on: October 22, 2014, 12:20:39 PM »
Hi magpwr. Interesting idea. It may be that the frequency relationships are not really so
fixed however. Based on my own experiments so far I think it may possibly not be so fixed,
but I can't say for certain at this point. What you are suggesting might work however if the frequency
relationship can always remain fixed to a specific ratio. :)
All the best...

hi Void,

After the recent discovery of 30th and 60th Harmonics used in device.
I came to a simple and straight forward conclusion at-
30th Harmonics-Yoke driven 55khz (Akula video translated by Wesly as attached earlier)
60th Harmonics-Yoke driven from 18khz....37khz.(Current device of Akula and Ruslan)

All these figures are within the specs of the yoke ferrite material capability.If you think any higher frequency possible yes but yoke core is not capable since we know it's designed to work till around 75khz.
Or any lower than 18khz the "Air-Core" multil-layer coil as a whole don't perform well.

In simple words what i am trying only 30th or 60th Harmonics is valid and the best choice to get both frequency aligned
.At 15th harmonics the frequency is way below air-core capability(Way below 18khz) at 120th harmonics it exceed the yoke core material capability since the frequencyto drive yoke core would exceed 70khz and easily goes into 100++khz .At this point yoke fails due to core saturation although air-core work work better at higher frequency.

There is nothing to worry as long you stick with the harmonics calculator 60th Harmonics typically or 30th Harmonics.
It's "fool" proof. :)

After alignment there is still nanosecond pulse to be injected.If anyone recall "the knife" as mentioned by Nicola which to me is the nanosecond waveform which looks like a knife blade facing upwards.

But if my unconfirmed theory is correct once these frequencies is aligned at 60th Harmonics then maybe current consumption should drop in order to light the bulb with same low brightness,without nanosecond pulse injected yet.

 

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5966 on: October 22, 2014, 12:23:30 PM »
Hi Jeg   :D

Excellent job my friend you have done and very clever.  :)

Keep your Over Unity work up !!

Reg,
enjoykin !!

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5967 on: October 22, 2014, 12:36:45 PM »
Hello ! That is most interesting my friend. I wish to know more about this experiment. Can you please provide more info about this setup ? or a source of it? It seems to be a well done tuning between kacher and grenade coil which is the very first step in replicating Ruslan's device.

Hi skywalker66.

You already know a lot about. It was experiment with Ruslan' s device with strange wounded coils. Effect was very unstable beacuse some parameteres were not valid. Yes tuning is important but you shoud need several valid arrangements to continue. It is not only like winding coils, making oscillator, katcher, connect light bulbs and expect something will happend in tuning. There rule serious systematic approach and sharp analysis of mistake - no Tsar way here. This is my point of view.

Reg.

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5968 on: October 22, 2014, 12:54:50 PM »
Hi d3x0r  :)

I can't comment because i don't know your setup. I need a more inormations.
In Ruslan's device there did not preseted any NE555 or exotic components.

Do you have some spectrograms of your "Earth response"?.  I suppose you already have good independent Earthing (grounding). Don't use common house grounding because there exist a lot of noise which can affect your generator and will be extremelly difficult estimate what is going in generator, how and from what !! Take atention Akula doing all his experiment on calm place in his personal dacha long away from his house in town.

Try to find translated above listed videos which i gave Itsu to watch. In my oppinion they are most important videos Akula ever has been recorded - till now.

Reg.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5969 on: October 22, 2014, 01:20:12 PM »
Hi d3x0r  :)

I can't comment because i don't know your setup. I need a more inormations.
In Ruslan's device there did not preseted any NE555 or exotic components.

Do you have some spectrograms of your "Earth response"?.  I suppose you already have good independent Earthing (grounding). Don't use common house grounding because there exist a lot of noise which can affect your generator and will be extremelly difficult estimate what is going in generator, how and from what !! Take atention Akula doing all his experiment on calm place in his personal dacha long away from his house in town.

Try to find translated above listed videos which i gave Itsu to watch. In my oppinion they are most important videos Akula ever has been recorded - till now.

Reg.
555 isn't 'exotic' as it seems... it's just a pulse width modulator thing... only it's only one half instead of tl494 symmetric dual output... but... it's the same...
most of it wasn't specifically to you, just noting you said...
No I don't have fancy equipment... my signal generator is manual. 


https://www.youtube.com/watch?v=5mJ69PlY7HA
link back to text in description... and a rough sketch, it's just the 25x25 coil and the grenade coil (simplified in sketch) output being grenade.


found lots of resonances, some so I had power on the ground side.
I have a ... 12m ground wire, that's seperate enough such that I can measure the ground all the way to the plug and see a signal from the coil, but cannot see it on the other side of the ground from the same wall.... I don't have 'ground' there's no moisture.