Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718698 times)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5910 on: October 20, 2014, 02:59:02 PM »
Hi Jeg. No worries mate. Just wanted to make sure you saw that comment.
Interesting that you are getting a resonance right on 2MHz and 1 MHz with
your new coil setup. That 6.75m choke in the series resonant loop will
likely lower the voltage at least somewhat across the 2x25 (or whatever winding count you used)
primary winding on the grenade. That is because it will drop voltage across it and take
voltage away from the primary winding. It will also likely reduce the current in that loop
a fair bit as well.
All the best...

That is the why I wind it as a current choke. Two wires same direction bifilar winds connected at the top.
Very low inductance so doesn't affect much the output voltage..
In addition because of the fact that cancels out its own magnetic fields, reactive voltage from coil is minimum so doesn't affect the passing of current.
First image the choke
Second, the signal thief from 3T circuit for katcher sync

Ps. My 25+25 is winded as 12+12 at the thin grenade side, and 12+12 opposite direction on the thick portion of the grenade. This is for loading the grenade more properly as it has the same pole on both outer sides, and same poles at the middle of the grenade squeezing one the other.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5911 on: October 20, 2014, 03:24:51 PM »
That is the why I wind it as a current choke. Two wires same direction bifilar winds connected at the top.
Very low inductance so doesn't affect much the output voltage..
In addition because of the fact that cancels out its own magnetic fields, reactive voltage from coil is minimum so doesn't affect the passing of current.
First image the choke
Second, the signal thief from 3T circuit for katcher sync

Ps. My 25+25 is winded as 12+12 at the thin grenade side, and 12+12 opposite direction on the thick portion of the grenade. This is for loading the grenade more properly as it has the same pole on both outer sides, and same poles at the middle of the grenade squeezing one the other.

Hi Jeg. Ok, I see how you did that choke now. That was a clever idea for lengthening that wire.
You have some really innovative ideas in there. Let us know how the testing goes.
All the best...

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5912 on: October 20, 2014, 03:28:03 PM »
Hi Jeg. Ok, I see how you did that choke now. That was a clever idea for lengthening that wire.
You have some really innovative ideas in there. Let us know how the testing goes.
All the best...

Thanks Void, I wish you the same :)

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5913 on: October 20, 2014, 04:23:13 PM »
Guys so many things to tell so I will keep it at the basics.

Itsu, it was my false that I never told you my initial katcher setup while I noticed the drifting. I was using only the two bias resistors at the gate and nothing else. The most simple arrangement. I wonder if you have something else connected to base and so keep your frequency steady! Please advice.



Sounds great Jeg, good progres.

Concerning my Kacher, its even more simple, just the 2SC5200 transistor and a 2.2KOhm resistor, see diagram.
Mind you, there it shows a PNP transistor, my 2sc5200 is a NPN, so change the plus/minus.

In front of the 1:1 transformer i have a variac connected to mains so i can vary the DC from 0 to max. 400V DC

Regards Itsu

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5914 on: October 20, 2014, 04:29:00 PM »
Thanks for reply Itsu !!  :)

Yes, you are right I mean on 2x 25 turns bifilar coil. He was wounded on Grenade so i see him as Grenade coil.  :)
.....................

Have you any idea why Akula tunned his Tesla exactly on 3td overtone of referent frequency?
Why not 2nd or 4th ??

Regards
Enjoykin4

I understand that on symetrical AC signal there are no even harmonics.
Try Googling "odd harmonics, or perhaps someone else could confirm and/or explain better why."

Regards Itsu
 

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5915 on: October 20, 2014, 04:30:28 PM »
Hi Itsu. It has not really been translated what Ruslan said when he drew that connection between
the two yoke secondary windings. It would help if a Russian speaker could translate what he said there.
I wasn't clear at all if Ruslan was just showing that you can ground one side of both windings, or if he was
saying that a possible variation is you could do away with the series resonance winding and 2x25 winding
part and just drive the grenade winding directly with one secondary winding on the yoke. Maybe he was
just pointing out that you can ground one side of both windings however. Not sure at all.

The following might work. If your function generator has a setting that produces a good broad frequency white noise signal
well into the high MHz range, you could drive your grenade coil with that and monitor with the FFT spectrum analyzer mode
on your scope. You should see some peaks at frequencies where there are resonances. Although
Akula made a video talking about locating such resonances, Ruslan seems to put little importance
to them. Ruslan says he is basing everything thing off fractions or multiples of wire length.
Seems to be working for Ruslan. :)
All the best...

Thanks Void,

i could try that last part, seems doable.

Regards Itsu

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5916 on: October 20, 2014, 04:39:10 PM »
Hmmm, my grenade does not have any parallel capacitor and it does not resonate in the low KHz range, more like
970KHz, 2.1MHz and 4MHz (self resonance).
What is total length of wire in grenade coil? You need to treat is as receievr antenna,same wavelength calculations apply there. Also multiply that by 4 and divide by 3 then you will know Tesla coil + antenna aimed wavelength and multiply by 100 for induction heater target wavelength. Then you can convert that into frequencies for resonances.
[/size]Concerning your request about "to record in high resolution complete cpectra", no problem to help if possible, but i am not sure i follow you.
My Tektroniks oscilloscope is just that, an oscilloscope, no spectrum analyser, or do you mean the FFT function?
I then need to sweep the whole range  0 Hz up to 100 MHZ  using my Function generator.
And what to scan?  The grenade coil, the 2x 25turn bifilar coil?  Please explain.

Regards Itsu
No need to sweep frequencies in grenade coil, there is nothing related to LC resonance. This is what Ruslan stated clearly in Teamspeak conference...

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5917 on: October 20, 2014, 04:40:24 PM »
<duplicate removed>

stupify12

  • Full Member
  • ***
  • Posts: 175
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5918 on: October 20, 2014, 06:50:42 PM »
Let me add some no important information. This is already very clear that this is the work of Nikola Tesla

The Bifilar Grenade coil only work as a Receiver of RADIATION. That is why we call it Radiant Energy comes from the word RADIANT SUN. Imagine you are holding the power of Sun Rays on your hand? 

The Bifilar Grenade Coil is the Insulated shiny metal conductor= Elevated Capacity.
The Kacher Circuit is the Resonant Tesla Coil that work as Transmitter here of Rays/Radiation.
The Bifilar Grenade Coil which will work best if LOOP like an antenna, is connected on the first armature/terminal of the 1uf/2000v Capacitor(1-10uf)= The Bifilar Grenade Charged Recieving Coil is being charged with Positive charge particle as per Tesla's words. To complete the energy on the HV Capacitor we needed a zero difference potential source which is the GROUND/EARTH.
The second armature/terminal of the 1uf/2000v is connected to the GROUND/EARTH, Tesla usually connect the second armature/terminal of the considerable electrostatic capacity Condenser on the GROUND/EARTH.

Just some speculation. Take it or Leave it.    ;D ;D ;D ;D LOL

Always remember Rays/Radiation, this is the only way for a device to work in Free Energy or Over-Unity.    MEOW ;D ;D

Meow

Tesla
Quote
The insulated plate or conducting-body should present as large a surface as practicable to the rays or streams of matter, I having ascertained that the amount of energy conveyed to it per unit of time is under otherwise identical conditions proportionate to the area exposed, or nearly so

Quote
The second terminal or armature of the condenser may be connected to one of the poles of a battery or other source of electricity or to any conducting body or object whatever of such properties or so conditioned that by its means electricity of the required sign will be supplied to the terminal. A simple way of supplying positive or negative electricity to the terminal is to connect the same either to an insulated conductor supported at some height in the atmosphere or to a grounded conductor, the former, as is well known, furnishing positive and the latter negative electricity

Quote
As the rays or supposed streams of matter generally convey a positive charge to the first condenser-terminal, which is connected to the plate or conductor above mentioned, I usually connect the second terminal of the condenser to the ground, this being the most convenient way of obtaining negative electricity, dispensing with the necessity of providing an artificial source. In order to utilize for any useful purpose the energy accumulated in the condenser, I furthermore connect to the terminals of the same a circuit including an instrument or apparatus which it is desired to operate and another instrument or device for alternately closing and opening the circuit. This latter may be any form of circuit-controller, with fixed or movable parts or electrodes, which may be actuated either by the stored energy or by independent means.

Quote
The sun, as well as other sources of radiant energy, throws off minute particles of matter positively electrified, which, impinging upon the plate P, communicate continuously an electrical charge to the same. The opposite terminal of the condenser being connected to the ground, which may be considered as a vast reservoir of negative electricity, a feeble current flows continuously into the condenser, and inasmuch as these supposed particles are of an inconceivably small radius or curvature, and consequently charged to a relatively very high potential, this charging of the condenser may continue, as I have actually observed, almost indefinitely, even to the point of rupturing the dielectric.


MEOW ;D ;D

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5919 on: October 20, 2014, 07:19:33 PM »
Hi d3x0r.  Driving a tesla coil with the primary windings at the bottom or at the center will definitely
give some difference in results. It depends what you are trying to achieve.
The 2N3055 has a max frequency spec (Ft) of 2.5 MHz. The 2SC5200 has a max
frequency spec of 30 MHz. The 2SC5200  should give a much better performance in a kacher circuit
running in the low MHz range.
All the best...
what I was using before; but don't have timing specs... was resonant about to 1.2Mhz

http://www.nteinc.com/specs/300to399/pdf/nte327.pdf
http://www.nteinc.com/specs/2300to2399/pdf/nte2319.pdf


2sc5200 (almost) equivalent...
http://www.nteinc.com/specs/2300to2399/pdf/nte2328.pdf


going to try to get some of those; because I have good high frequency ringback now... but I suspect it's from the primary only...

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5920 on: October 20, 2014, 08:47:05 PM »
The Bifilar Grenade Coil is the Insulated shiny metal conductor= Elevated Capacity.
The Kacher Circuit is the Resonant Tesla Coil that work as Transmitter here of Rays/Radiation.
That is correct understanding  8) Also N. Tesla ment in his patents exactly that.
Also the http://en.wikipedia.org/wiki/Regenerative_circuit method can be used to amplify received power in grenade coil just in this case it adds amps to the voltage gain and there you have summary output power...

Cheers!

stupify12

  • Full Member
  • ***
  • Posts: 175
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5921 on: October 20, 2014, 08:53:24 PM »
Calculating the length of the Grenade Coil.   Let's say we like to stay put in frequency of 3Mhz.

Here is the formula used by the calculator of the wavelength (lambda)
depending on "v" (velocity of the wave) and "f" (frequency).
wavelength frequency formula


Lambda=Velocity / Frequency.

V=Velocity of Propagation of Electrical Disturbance
F=Frequency
Lambda= Wavelength

Tesla Constant Velocity of Propagation=185000(One Hundred and eighty-five Thousand Mile per second)
Let's convert Miles into Meters:   185000 Miles =  297728640 Meters

All the guys here like to used the 3Mhz Frequency so let's use this.

http://www.wavelengthcalculator.com/ Using this online calculator.

Velocity :297728640 m/s
Frequency: 3Mhz
Wavelength= The answer is 99.24288 m

1/4 of the Wavelength: 99.24288/4 =24.81072 meter wire to wound.   

Just speculation.


MEOW ;D ;D

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5922 on: October 20, 2014, 09:09:30 PM »
http://www.nteinc.com/specs/2300to2399/pdf/nte2328.pdf  (2sc- thing.. 25Mhz)
the NTE327 on package says 40Mhz


Still can't get kacher over 500 some Khz...
put two variable resistors to power and ground to the base; I can tune to get more output with a low resistance to power... resistance to ground being lower than a lot is bad...


the wire is 48-49 meters... which is 6.1Mhz


putting a bar of ferrite in it increases output and decreases amp draw...


Inductance of 3.75" diameter 3.75" length, 150 winds (each turn 0.31m) maybe it's a little shorter than 48 meters...
1.455mH; resonant capacitance of 536Khz 1.4mH is 60pF....


I'm not seeing how to attain the proper goal :/

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5923 on: October 20, 2014, 09:27:27 PM »
Still can't get kacher over 500 some Khz...
You need to lower interwinding capacitance so the Tesla secondary coil winding spacing should be at least on every second turn. Ruslan used 0.8mm diameter wire(oxygen free) as he told in latest video https://www.youtube.com/watch?v=hpYj4YT_DIs

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5924 on: October 20, 2014, 10:39:39 PM »

Sounds great Jeg, good progres.

Concerning my Kacher, its even more simple, just the 2SC5200 transistor and a 2.2KOhm resistor, see diagram.
Mind you, there it shows a PNP transistor, my 2sc5200 is a NPN, so change the plus/minus.

In front of the 1:1 transformer i have a variac connected to mains so i can vary the DC from 0 to max. 400V DC

Regards Itsu

Tnks Itsu.
After some consideration, the only logical explanation is that my 2n3055 transistor is not so quick as yours, and small voltage changes affect the output frequency. I can't see any other reason for this discrepancy.