Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718164 times)

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5820 on: October 17, 2014, 01:46:30 AM »
How to wind correct Grenade ?

Answer is simple - make Blue Grenade. Tested and worked 100%

You need to get from your Grenade as small inductance as you can get. Ideally 0 inductance.
Use LCR meter to test how good you are in winding Grenade.

Зелёная Граната Штопора

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5821 on: October 17, 2014, 04:07:14 AM »
How to wind correct Grenade ?
Answer is simple - make Blue Grenade. Tested and worked 100%
You need to get from your Grenade as small inductance as you can get. Ideally 0 inductance.
Use LCR meter to test how good you are in winding Grenade.
Зелёная Граната Штопора

Hi Enjoykin. What you are saying appears to be at odds with what Ruslan explained in his video
and elsewhere on winding the grenade coil, from what I understood anyway. Each layer is not wound
phase opposing (which would cancel out the inductance for each layer of two roughly equal and opposing windings),
but it has been explained that each layer of two windings is wound to be phase additive, and the final resulting overall
inductance is about 240 uH to 250 uH approximately (as shown by Ruslan in his video), not close to 0.
All the best...

« Last Edit: October 17, 2014, 01:04:42 PM by Void »

Acca

  • Hero Member
  • *****
  • Posts: 563
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5822 on: October 17, 2014, 05:22:43 AM »



 Roman  (Akula0083) has a new Tesla power generator.. 20 Watt free power generator.
Look in HD and it’s great !!
 
 
https://www.youtube.com/watch?v=awy9OgRd-D8
 
Acca..
 

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5823 on: October 17, 2014, 05:32:29 AM »
....(which would cancel out the inductance for each layer of two roughly equal and opposing windings),
but it has been explained that each layer is wound to be phase additive and the final resulting inductance
is about 240 uH to 250 uH approximately (as shown by Ruslan in his video), not close to 0.
All the best...
I'm not sure why it's not closer to 0... 1/2 of the turns is slightly wider in diamter for slightly more inductance, plus the 3rd layer being 1/2 again that much is also larger... which would be more towards zero than -3/4 would be...


260 turns at 6cm for 52cm length (2mm wire maybe) is 438uH ... same coil at 1/8" winds (82cm) is 283uH which is just the 49m wire wrapped as a [size=78%]solenoid... I thought the reverse windings subtracted inductance...[/size]

was trying to find a calculator for inductance of a straight wire... like if 49m isn't coiled in any way, what's it's inductance?  Is the real inductance of the coil +0 from the wire's inductance itself?

49m in 1 loop (15m diameter) is 32.8uH ... in theory...

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5824 on: October 17, 2014, 06:16:18 AM »
have to string together some videos; was able to recreate modes where toggling the signal generator makes it work.  inbetween here and the start, the kacher would just NOT work.  so reverted from battery to power supply and started working.... 10V 0A for +/- 60V out at fair current... have to make better measurements I know... but after a time the current went up; so I assume it ended up working on the charge of the cap in the power supply... so I added a capacitor at the end, so I get a second and a half run time after turning off the kacher power... slightly longer with 45khz signal generator working.


But with the cap, the kacher oscillates for quite a while where it's not high enough to produce light on the LEDs... if I reconnect power to the kacher at that point, with the signal generator on, the kacher does not power up correctl.  If I toggle the signal generator off, then the kacher resonance goes up, then I can turn the signal generator back on, and the output increases.     This is with the grenade output also connected to the ferrite core... the other end of that is not connected.  think I had to restore that connection to make it work again at high output.


the battery seems is just stuck at 'won't resonate'.
Also, I had good kacher output with the low-turn winding-cuff coil disconnected from their capacitor... then connecting that capacitor kills the output... to like 10% voltage.   so then turning it all off, connecting that, starting the signal generator, then starting the kacher, then turning the signal generator off and back on seems to be a good start-up procedure.


Edit: adding the capacitor in front of the power supply changes it from 0.00-0.02A to 0.20-0.24A ... and when output is available the kacher transistor gets warmer to hot.


edit2: the low frequency resonance is better seen when the inductance of the grenade and the cuff are the same.


Edit3: replaced signal generator with power transistors and a 555 timer tuned for around 46Khz and 50% duty cycle.  Low frequency was resonating in wide 46khz bands, but it doesn't now... changed the load, so I have the grenade to the ferrite core to a rectifier to + and - which go - to an indandescnt and + to 60V LEDs.  tuning the 555 for various duty cycle could make the incandescent glow more brightly, but the LEDs would go out, connecting the kacher had minor effect on the incandescent and the LEDs lit up again.  Ended up heating my drive transistors pretty well, and actually felt some wamth from the bulb.. running off a 12V battery, and ground.  and the signal was more like a 1/4 duty cucle pulse followed by some small ringing ... not sure if somethig changed; if I was driving the 555 in an inversed duty cycle or something...

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5825 on: October 17, 2014, 07:59:30 AM »
 :)
Quote
But but but, the multi layer coil (2x 48, 2x 24, 2x 12) does not resonante at  range 18khz....37khz, thats the 2x 25 turn pickup coil with the 0.47uF
capacitor in series!
Yes. That capasitor in series with multi layer coil is not resonase capasitor, it is coupling capasitor.[/size]

Quote
My  multi layer coil (2x 48, 2x 24, 2x 12) resonates (without any capacitor attached) at severall points starting at 950KHz - 4MHz.
Only in this two points (I get only on 900 kHz and 4 MHz)?

« Last Edit: October 17, 2014, 01:23:06 PM by MenofFather »

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5826 on: October 17, 2014, 08:06:31 AM »

Quote
I swapped the nano-pulser little toroid secondary leads, and now indeed the nano-pulse at 150V dc input is only 330Vpp instead of 1KV, but
also about 1/3 wider at 50ns instead of 15ns.
Well done! Try inreace pulse lengh going to transistor gate. To get 100-300 ns pulse.


And inductor (bifilar coil, of two layers) must be grounded. And it must be on top coaxial cable, better maybe mount tube on coaxial cable and then wound inductor.
You can try that setup:



Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5827 on: October 17, 2014, 12:21:35 PM »
I'm not sure why it's not closer to 0... 1/2 of the turns is slightly wider in diamter for slightly more inductance, plus the 3rd layer being 1/2 again that much is also larger... which would be more towards zero than -3/4 would be...

260 turns at 6cm for 52cm length (2mm wire maybe) is 438uH ... same coil at 1/8" winds (82cm) is 283uH which is just the 49m wire wrapped as a [size=78%]solenoid... I thought the reverse windings subtracted inductance...[/size]

was trying to find a calculator for inductance of a straight wire... like if 49m isn't coiled in any way, what's it's inductance?  Is the real inductance of the coil +0 from the wire's inductance itself?

49m in 1 loop (15m diameter) is 32.8uH ... in theory...

Hi d3x0r. If we just look at one equal length layer of two windings which are wound all in the same direction, then
that will be phase additive windings, so the total inductance will increase rather than cancel.  The next two
layers are wound in the opposite direction from the bottom two layers so there will be some counteraction
there with the bottom two layers, but there will still be an overall total inductance amount since the bottom two layers
have more turns than the total of the above layers. If you balanced the total inductance amount of
the higher four opposing wound layers with the inductance of the bottom two layers you could end up with
close to 0 inductance from wire end to wire end, but that is not what Ruslan showed in his video anyway.
It appears that total overall inductance cancellation wasn't the goal based on what Ruslan showed.

Coils have a high degree of self inductance due to the magnetic interaction between adjacent turns in the coil,
so it is not comparable to the inductance of a straight wire if the windings in the coil are wound phase additive.
If you wind a two layer coil with the two layers wound in opposite directions you will get a resulting
low inductance since the two layers are wound phase cancelling. How low the inductance is depends on
how evenly matched the two opposing windings are. The more evenly matched the two windings are the more
cancellation will occur. Ruslan showing that he had roughly 240 to 250 uH in one of his grenade coils
does seem to indicate that his goal was not comlpete inductance cancellation, although as I said
the '48' turn bottom two layers inductance will be opposed by the shorter layers above that are wound in the
opposite direction, so the total inductance of the grenade coil will be a fair bit less than you would
get if all layers were wound in the same direction.
All the best...


magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5828 on: October 17, 2014, 01:27:48 PM »


 Roman  (Akula0083) has a new Tesla power generator.. 20 Watt free power generator.
Look in HD and it’s great !!
 
 
https://www.youtube.com/watch?v=awy9OgRd-D8
 
Acca..

hi Acca,

Thanks for providing this video link.

Everyone, i do have good news for you since this low power device was sold to China.

I do have alternate view which it would spell good news for us all related to the current device we are working on.


Recall the video of Akula where he mentioned something like "frequency of the land" which was giving me headache because it was just one of the last riddles i feel weeks back it needs to be solved.

Long story short -Since this recent low power device was sold to China and obviously it will be in land of China.What i am trying to say here it doesn't matter now what "frequency of the land" means. :D :D :D
Isn't this considered good news since now we know this device can be placed on any land-running at optimal a not it doesn't matter as long it self run. :D


------------------------------------------------------------
To me as long you got metal water pipe which was dug in Earth or common metal "house heater" as seen in Ruslan or SR193 video is good enough.But i am unable to tell if you stick a thin pole in wet soil to get something out this part i don't know on how to advise for the rest since we are only at the discovery stage.

For me although i am living in high rise apartment my water pipe is 100% connected to the earth below one way or another in a network of water pipe large or small which covers the entire island. :D

----------------------------------
Please wait out for my next post 1 or 2 hours later-related to my latest findings as generated in my head "with no riddles" but base on pure science.
Hint-We are approaching the end to crack this device."It's like breaking the magician code episode" :D :D :D

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5829 on: October 17, 2014, 01:29:05 PM »
.... Ruslan showing that he had roughly 240 to 250 uH in one of his grenade coils
does seem to indicate that his goal was not compete inductance cancellation, although as I said
the '48' turn bottom two layers inductance will be opposed by the shorter layers above that are wound in the
opposite direction, so the total inductance of the grenade coil will be a fair bit less than you would
get if all layers were wound in the same direction.
All the best...
Right; I concur that measurements indicate 240... itsu I think was down at 170?  Mine's 266....
I guess there's a factor of turns * turns in there too... so 64 is a LOT more than 32....
like to go from 220 to 266 was really only 6 turns... on top of already 48 hmm just wondering I guess it adds up to more than 0.


----
and then not Re quote....


https://www.youtube.com/watch?v=_5CHOn7gi-g


I think I blew up my 555's output.  I changed the transistor for a mosfet because I figured maybe I wasn't really supplying enough current... and hence the spike.  I got the same puls-y sort of spike with a mosfet... ended up with multiple back ringings at about 3x 45Khz.... still was unable to get a 45khz resonant wave... it flattens out and becomes more spikey with a higher current driver....


Had about 30 seconds runtime on 68kuF 60V Led... recorded but not published yet... I think I can do better... but then I was adjusting my 555 and stopped getting output; either I killed the irfp250 or the 555, which only has .5V output now.. *shrug*

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5830 on: October 17, 2014, 01:29:19 PM »
:) Yes. That capasitor in series with multi layer coil is not resonase capasitor, it is coupling capasitor.[/size]
Only in this two points (I get only on 900 kHz and 4 MHz)?

As i mentioned earlier: 
http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/msg419357/#msg419357

i measure the following resonances
(sine wave signal when inputting 5V square wave):

   944 KHz 20Vpp
2.115 MHz 10Vpp
3.965 MHz 12Vpp

Inductance measured then:

100Hz    146uH
1 KHz     146uH
10 KHz   145uH
100 KHz 87uH

Regards Itsu

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5831 on: October 17, 2014, 01:31:58 PM »
Well done! Try inreace pulse lengh going to transistor gate. To get 100-300 ns pulse.


And inductor (bifilar coil, of two layers) must be grounded. And it must be on top coaxial cable, better maybe mount tube on coaxial cable and then wound inductor.
You can try that setup:

I tried grounding the bifilar 2x 25 turn coil, but no difference seen.

For the coax inbetween the bifilar (2x 25 t) and the grenade coil i have to do some partial rewinding.......


Regards Itsu

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5832 on: October 17, 2014, 01:49:22 PM »
...
When i do that (multilayer coil grounded at one end, the scope probe across this coil), a measure the following resonances
(sine wave signal when inputting 5V square wave):

944KHz 20Vpp
2.115KHz 10Vpp
3.965KHz 12Vpp
...
So you get 3 frenquencies on multilayer coil?
2.115KHz it seems that, about that speaking Ruslan.[/size]
 :D

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5833 on: October 17, 2014, 01:58:04 PM »

In all Ruslan divice seems 2 layers coil (bifilar) wounding begining is at that point at that is multilayer coil wounding beggining.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5834 on: October 17, 2014, 02:03:34 PM »
So you get 3 frenquencies on multilayer coil?
2.115KHz it seems that, about that speaking Ruslan.[/size]
 :D

Yes,  3 distinct peaks, there are more, but much lower in amplitude.

Regards Itsu