Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719627 times)

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5550 on: October 04, 2014, 06:35:11 PM »
Very nice Mag. If we could find the relative direction of granade also, it would have more sense. If you look at the picture at my previous post attachment, there all the directions can be shown.

Nick if you spoke about this pic that Mag attached, yes it looks like it has 12+12 and heavier gauge wire than the grenade.

hi jeg,

Please follow itsu.We have already sorted out the receiver portion few days ago and i have pasted my coil spec with the number of turns awhile ago for Hoppy.

That's all for now.I need to charge my batteries. :D :D :D :D

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5551 on: October 04, 2014, 08:39:54 PM »
 
  Hoppy: I got my new Mazill crt working now. The problem was a combination of one bad solder joint, and possibly a bad new battery. The device works ok with my 12v, 10 amp battery charger. But, the brand new battery will not hold the charge, and I may have to replace it with another one. Voltage drops too much when the device is turned on. Which also makes the fets heat up, as well, as you have previously mentioned.
 My fets, IRFP260N (6 pack) are all a bit different from one another, and so are  their output readings.
I'll screw the fets down in place on the heatsinks when I find the right size drill and screws, as the motherboard heatsinks don't have the mounting hole in them.


Nick,

Good news! Go for a much bigger battery, say 20A/hr or bigger. When you drill holes in the heat sink, make sure you lightly countersink the holes, especially on the surface so that the mosfets lay completely flat on the heat sinks.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5552 on: October 04, 2014, 08:48:36 PM »
Very nice Mag. If we could find the relative direction of granade also, it would have more sense. If you look at the picture at my previous post attachment, there all the directions can be shown.


I agree, it would be most helpful to have a clear pictorial winding instruction showing directions of wind from a fixed reference point at the start of winding at thin end of the grenade.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5553 on: October 04, 2014, 09:20:10 PM »
It's ok.I have just cracked\solved this outer coil winding direction mystery  in 3 minutes using another alternative verification approach.




I like the notes on the kapagen coil... (I lost my images so I'll have to dig for it...)
an originalish is heree... you can see the winding directions pretty well... http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/msg408309/#msg408309

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5554 on: October 04, 2014, 10:07:49 PM »
So we have 48-48 cw, 24-24 ccw, 12-12 ccw as viewed from start of winding at thin end of grenade - yes?

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5555 on: October 04, 2014, 11:11:06 PM »
So we have 48-48 cw, 24-24 ccw, 12-12 ccw as viewed from start of winding at thin end of grenade - yes?

Nope,  not me, i have 48-48 ccw, 24-24 cw, 12-12 cw  as viewed from start of winding at thin end of grenade

like in this picture:    http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/msg418454/#msg418454

Regards itsu

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5556 on: October 05, 2014, 12:20:04 AM »
hi everyone,

It's Sunday morning 6am here.I took a quick peek in Russian forum at Page 116 latest update-

Ruslan have posted his comment which i just translate to english-
{
To begin, the entire assembly Prepare the wire of 2.5 mm square 50m, 60cm tube length and diameter of 50mm, Ferro-core from the telly or monitor the operating frequency of 25-75 kHz oscillator push-pull collect as you want, you only need a good and stable operation of the rectangle .  It is advisable to all PCB and locking konedensatorami for interference.  As Generator BB will use 2SC5200 transistor in place KT805B (although it can be), the rest is done by the scheme Roma Shark that he vykladovat.  It's about the explosive generator.  On the way out, we should get a clear pulse of 5-7 kV.  More is better of course (http://www.realstrannik.ru/media/kunena/emoticons/blink.png)  Frequency air-core transformer coil podstraivaetsya counter is enabled from the explosive cores on anttenu (http://www.realstrannik.ru/media/kunena/emoticons/wassat.png)  We must not get our magical transformation coil and Absorption of radiant energy in the environment by using pulses of explosives.  This nasamom business is not difficult, but requires some subtleties. One of them - Earth + getting cold energy and discharge it into the condenser.  Very similar to what I did Bidin.

}

Why the doubts guys on certain simple things eg:winding which is easy but i know human mind tend to think more complicated than the device itself.
"It's just the way this have been for humans,can't blame anyone"

This information i have pasted is now "straight from the horse's mouth" the device creator himself-


The only part i honestly  can't help is  the high voltage probe at least 10kv rated is needed to observe nanosecond burst for the scope ,if you treasure your scope. :)
 
Time to continue my sleep cycle. :D
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5557 on: October 05, 2014, 01:02:10 AM »
Hi that's a big chunk of guttering down pipe, are you using a solid 2.5mil inner conductor or a multiple strand cable? and does it make a difference in what direction you wind any of it ?
One thing to mention if you look at all the other systems like the Akula unit he is only 32mm Kacha coil sliding in and out of a 40mm grenade type coil and it looks the same with the Ruslan device also, just an obviation.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5558 on: October 05, 2014, 02:43:25 AM »
Hi that's a big chunk of guttering down pipe, are you using a solid 2.5mil inner conductor or a multiple strand cable? and does it make a difference in what direction you wind any of it ?
One thing to mention if you look at all the other systems like the Akula unit he is only 32mm Kacha coil sliding in and out of a 40mm grenade type coil and it looks the same with the Ruslan device also, just an obviation.

hi AlienGrey,

It's multi-strand 2.5mm sq on 5cm dia pvc pipe.

I have also attached the coil spec i would be using for the last time.

I shall not repeat winding procedure anymore.All the other details please refer to older posting of mine less than 2 weeks ago.

Lastly i have attached Kapanadze coil turns image for winding guide.Do observe the long wiring from top of 48 turns to bottom of 24turns is done which you need to apply for Ruslan winding.
"The only missing from the old Kapanadze coil is the 25,25  turns layer which a "larger outer coil" which is present in latest Ruslan device


I am more focus on Ruslan but circuit Akula's.There is alot of mixing going on but i am not worried. :)

If you are unable to recall easily please take down all the important pointers.It would be better approach for everyone as well.
 

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5559 on: October 05, 2014, 02:57:18 AM »
"One of them - Earth + getting cold energy and discharge it into the condenser.  Very similar to what I did Bidin. "

Inferring from the iffy translation, it appears Ruslan may believe that you need to discharge the
output through a diode to a capacitor to capture the output energy, but Akula did not
show a diode going to a cap at the output in his second self runner schematic. Akula just showed
going through a choke to a 5nF capacitor. Ruslan previously mentioned using 37.5 meters wire length
for his multilayer coil (I think that is the coil he was referring to) on a 40mm diam tube, now he seems to be saying
to use 50 meters of wire on a 50mm diam tube.  ;D  No shortage of conflicting info from these guys,
but the general approach in their devices appears quite similar. Ruslan is still saying he will
reveal all the info on his approach soon, from what I understand using Google Translate anyway.
:)


magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5560 on: October 05, 2014, 03:22:42 AM »
"One of them - Earth + getting cold energy and discharge it into the condenser.  Very similar to what I did Bidin. "

Inferring from the iffy translation, it appears Ruslan may believe that you need to discharge the
output through a diode to a capacitor to capture the output energy, but Akula did not
show a diode going to a cap at the output in his second self runner schematic. Akula just showed
going through a choke to a 5nF capacitor. Ruslan previously mentioned using 37.5 meters wire length
for his multilayer coil (I think that is the coil he was referring to) on a 40mm diam tube, now he seems to be saying
to use 50 meters of wire on a 60mm diam tube.  ;D  No shortage of conflicting info from these guys,
but the general approach in their devices appears quite similar. Ruslan is still saying he will
reveal all the info on his approach soon, from what I understand using Google Translate anyway.
 :)

hi Void,

I ask you a simple question from a engineer point of view.
If the device needs 37.5meter of cabling would you dare allocate/cut exactly 37.5m of cable for your work or would you give allowance for cabling?
By the way at my location i can only buy cable which comes in 100meter ,have you considered in another part of the world eg:Russia it comes in 50meter length.
Have you thought about that,the smaller details.


Please stop confusing people at this moment.From the horse's mouth-Ruslan it also came 50mm or 5cm diameter with 60cm for  length of pvc pipe not 60mm diameter.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5561 on: October 05, 2014, 03:31:50 AM »
hi Void,
I ask you a simple question from a engineer point of view.
If the device needs 37.5meter of cabling would you dare allocate/cut exactly 37.5m of cable for your work or would you give allowance for cabling?
By the way at my location i can only buy cable which comes in 100meter ,maybe in other part of the world it comes in 50meter.Have you thought about that.
Please stop confusing people at this moment.From the horse's mouth-Ruslan it also came 50mm or 5cm diameter with 60cm for  length of pvc pipe not 60mm diameter.

Hi Magpwr, it was a typo which I had already corrected, but you quoted my
post before I had finished editing it. I guess in the future I should edit my comments offline
before posting :)

I already bought my wire in 30m rolls as I didn't want to buy a huge roll of it, so I will
have to make a splice to get longer than 30m. In ordinary wiring or in a normal coil that shouldn't
be a problem, but when it comes to these devices, then it's anyone's guess if that matters or not. ;)


magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5562 on: October 05, 2014, 03:34:50 AM »
Hi Magpwr, it was a typo which I had already corrected, but you quoted my
post before I had finished editing it. I guess in the future I should edit my comments offline
before posting :)

I already bought my wire in 30m rolls as I didn't want to buy a huge roll of it, so I will
have to make a splice to get longer than 30m. In ordinary wiring or in a normal coil that shouldn't
be a problem, but when it comes to these devices, then it's anyone's guess if that matters or not. ;)

hi void,

Sorry for the confusion.I didn't spot your typo fix only after i posted.

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5563 on: October 05, 2014, 04:57:27 AM »

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5564 on: October 05, 2014, 05:34:03 AM »
hi void,
Sorry for the confusion. I didn't spot your typo fix only after i posted.

No worries mate. :)