Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718270 times)

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5355 on: September 27, 2014, 02:15:43 PM »
"May i ask you MenofFather what direction you are planning to take to built a device."
I not say about my plans, that I build. Then I finish buid, I show, if I not finish, I not show.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5356 on: September 27, 2014, 02:53:10 PM »
the kachar ?/3 looks more like a wavelength symbol... [/font][/size]λ  ...[/font][/size] which would be freq*3... low gauge coil is 400... kacher at 1200...


Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5357 on: September 27, 2014, 03:13:22 PM »
Because the true "resonant bifilar coil" is the first and the second layer (see TESLA PATENT 512.340).
These first two layers are in fact about half the length of the entire coil Tesla/Kapanadze.  ;D

Hi Corry
Thanks for the explanation which seems that is not very far from reality, even i was expecting an antenna theory behind your statement. For sure the different portions of inductance gives different response in terms of sensitivity to certain frequencies across the entire length of the coil. But needs further investigation.

Mag, nice job man. I hope that synchronicity will be not a problem. Most important seems to be the choise of the right low frequency.  Is there any specific way of choosing it? Until now i believe that dividing by two the high frequency component, you find the right subharmonic at KHz range. For example, if 4MHz is the HF, then 4MHz/2/2/2/2/2/2/2/2= 15.6KHz. What do you think about that guys?

Menof your info everytime is very well appreciated. Thanks a lot..


Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5358 on: September 27, 2014, 03:19:18 PM »
And something else. My Yoke core with 24V input, 6+6 turns primary and 28Turns secondary gives less than 200V pk-pk with nothing else connected at it. When i connect it to the bifi is not more than 50V pk-pk.
 How ruslan with the same turns and 12V input reach 220V?

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5359 on: September 27, 2014, 03:30:17 PM »
Here Ruslan schematic.

Menof..
At yours schematic, bifi coil is different than ruslan shows. Ruslan's drawing show a bifi wounded as exactly the blue aquarium coil, and at your schematic every layer cancels the other. The overall inductance is very different to those two coils. Your way of winding will give not more than 30uH, and blue coil is over 100uH. Why is that difference in those two schematics?

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5360 on: September 27, 2014, 03:40:47 PM »
And something else. My Yoke core with 24V input, 6+6 turns primary and 28Turns secondary gives less than 200V pk-pk. How ruslan with the same turns and 12V input reach 220V?

hi Jeg,

The rectified output from Yoke/toroid core using 4xfast diode to form full-bridge(Don't use typical full bridge as these are design for low frequency 50/60hz)  and high voltage capacitor around 300volts connected with a high voltage decoupling ceramic capacitor would produce around 150volts as long it's more than 100volts eg:120volts at least you should be ok.
If you read up the pdf which i have it google translated base on Akula Tesla coil tuning.He mentioned somewhere about lowest voltage for nanopulser to use is 100volts.
----------------------
I have fully assembled the circuit in virtual environment and found that there is one more intentional mistake made which the 2 resistor value(840 Ohms,20kohms)
 located at IRF4905 were intentionally swapped. This IRF4905 can never be turned on with original resistor layout unless you swap both resistors 20k->840,840->20k. :D

I will upload the final edit version 3.0 to this circuit along with full component assembly in virtual and final explanation and video.
The nanopulse now perfectly tallies with Ruslan drawing.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5361 on: September 27, 2014, 04:02:27 PM »
Ruslan say, that output coil frenquency is 4.6 megaherc and that kacher work on trith (3) harmonic.

4.6MHz/2/2/2/2/2/2/2/2=17.9KHz

Mag for 220V how many turns approximately you think i need for my yoke secondary?

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5362 on: September 27, 2014, 04:13:34 PM »
4.6MHz/2/2/2/2/2/2/2/2=17.9KHz

Mag for 220V how many turns approximately you think i need for my yoke secondary?

hi Jeg,

Why 220volts when you need only to create 150volts dc.By the way the high frequency transistor 2SC5200 base in datasheet max voltage is 250volts.
I am unable to advise  if you don't wish to follow circuit spec.

I prefer to do things on "as is basis" and not on "what if basis"

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5363 on: September 27, 2014, 04:21:50 PM »
hi Jeg,

Why 220volts when you need only to create 150volts dc.By the way the high frequency transistor 2SC5200 base in datasheet max voltage is 250volts.
I am unable to advise  if you don't wish to follow circuit spec.

I prefer to do things on "as is basis" and not on "what if basis"

Sorry man we are talking about different things. By the way, check the snuber diode at the circuit that you attached. It is wrong oriented. It has to have face down for charging the capacitor without resistance. Personally i am almost sure that if you go with katcher you don't need this so called snuber at all as you want a clear sinus wave from yoke.. This 'snuber' is for loading the low frequency signal with higher frequency pulses and initial is designed for using it without katcher..

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5364 on: September 27, 2014, 05:17:52 PM »
Sorry man we are talking about different things. By the way, check the snuber diode at the circuit that you attached. It is wrong oriented. It has to have face down for charging the capacitor without resistance. Personally i am almost sure that if you go with katcher you don't need this so called snuber at all as you want a clear sinus wave from yoke.. This 'snuber' is for loading the low frequency signal with higher frequency pulses and initial is designed for using it without katcher..

hi Jeg,

Thanks for advising about the snuber portion.I guess this flaw can only be discovered and fixed through actual experiment with Yoke core.There are certain limits in virtual environment.


magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5365 on: September 27, 2014, 05:33:31 PM »
hi everyone,

I have attached the latest  edited version 3.0 of the circuit diagram in rar file after discovering and fixing a intentionally created bug in the nanopulser section based on the Ruslan circuit.

The latest bug was discovered at IRF4905 which the resistors 840,20kohms were intentionally swapped.This prevents the IRF4905  from switching on which the function is to provide a positive bias(11.6volts) via 1.2kohms resistor to turn on high frequency transistor KT805A or 2SC5200.

Side Note-
The Ruslan circuit which i was analyzing which the bottom of Tesla coil is also connected to the transistor base.
Kinda reminded me of the circuit in video i previously made for wireless tesla transmitter
which the transistor is positive biased to trigger switching upon power on.http://www.youtube.com/watch?v=RiEDIx4Qi8o


I have also attached a video of the assembled circuit in virtual environment in action.
This nanosecond pulse at Channel D(Green) in virtual scope now looks very similar to Ruslan drawing related to nanosecond pulse.

R9 can be changed to 1kohms pot .This makes tuning easy as tested in virtual.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5366 on: September 27, 2014, 05:45:35 PM »
hi Jeg,

I guess this flaw can only be discovered and fixed through actual experiment with Yoke core.There are certain limits in virtual environment.

I agree with you..
Take a look what you can do just with snuber. If you add pulses from katcher then you are going to produce unwanted beats.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5367 on: September 27, 2014, 05:50:10 PM »
And something else. My Yoke core with 24V input, 6+6 turns primary and 28Turns secondary gives less than 200V pk-pk with nothing else connected at it. When i connect it to the bifi is not more than 50V pk-pk.
 How ruslan with the same turns and 12V input reach 220V?
From inductor maked curent plus that voltage and you get 220 volts. For inductor he say 3-4 turns. Here is series resonance, so on bifiliar inductor coil you get not 6 volts, but 150-100 volts. 150+50=200. That is enought for power suplly to made selfrunning. Wery simple.
 :)

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5368 on: September 27, 2014, 05:53:20 PM »
Menof..
At yours schematic, bifi coil is different than ruslan shows. Ruslan's drawing show a bifi wounded as exactly the blue aquarium coil, and at your schematic every layer cancels the other. The overall inductance is very different to those two coils. Your way of winding will give not more than 30uH, and blue coil is over 100uH. Why is that difference in those two schematics?
In my schematic layer not cansels each other. You not properly read schematic. You can read about dots in woundings and that they mean and if you understand how they say in that side need wound, then you understand, that in my schematic dots is properly puted.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5369 on: September 27, 2014, 06:01:57 PM »
In my schematic layer not cansels each other. You not properly read schematic. You can read about dots in woundings and that they mean and if you understand how they say in that side need wound, then you understand, that in my schematic dots is properly puted.

Got it Menof thanks! I feel that we already have everything we need to do the job.