Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719419 times)

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5130 on: September 15, 2014, 05:42:40 PM »
  I put a diode on my earth ground connection that goes to the Kacher, that I use on my Mazilli crt.  No change in the way that the Kacher works, and not much added brightness to the bulb, in either direction of the diode.

Yes, I have seen the same thing. I put a 1 ohm current sensing resistor in the earth ground line
and viewed on the scope, and it is a sinewave when the waveform on the secondary winding is a
sinewave. Since it is AC, it should still pass current with a diode in either direction.
All the best...


MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5131 on: September 15, 2014, 07:45:09 PM »
"...Any tips on how the secondary should be wound to match what Akular/Ruslan are doing?"
Output coil in Ruslan latest divice is like Kapanadze blue coil. But I try that coil and not get overunity. Here no magic coil probarly. Here need made properly ajustion. Just one coil like Ruslan not give to you overunity.


 :)

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5132 on: September 15, 2014, 11:55:37 PM »

The technical term is stochastic mixing.

In way Akula and Ruslan is using that is making standing wave inside of bifilar with one end from induction cooker style source + nanopulse source (from generator or filtered out Tesla coil signal to make huge 35kV+ spike on peaks for antenna) and another end as Earth for electrons pump...

 And the concept used there is only one and best exlained by Tesla:
http://www.ussdiscovery.com/corum/corum/corum.htm

"...it became apparent that the fireballs resulted form the interaction of two frequencies, a stray higher frequency wave imposed on the lower frequency oscillations of the main circuit.... This condition acts as a trigger which may cause the total energy of the powerful longer wave to be discharged in a infinitesimally small interval of time and the proportionately tremendously great rate of energy movement which cannot confine itself to the metal circuit and is released into surrounding space with inconceivable violence.

It is but a step, from the learning how a high frequency current can explosively discharge a lower frequency current, to using the principle to design a system in which these explosions can be produced by intent." -N. Tesla

stupify12

  • Full Member
  • ***
  • Posts: 175
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5133 on: September 16, 2014, 02:42:28 AM »
To those who are willing to listen and contribute. Tesla have already given all the answer to us but we got stuck to his Tesla Coil..

Edison Effect!

Tesla
Quote
Well, in some of these bulbs I have shown, for instance,
that a heated conductor emits a stream of ions, or, as I said
at that time, charged particles, and a few of these bulbs I
have been using exactly in the same manner as the Audion(TRIODE) is
used today.

Tesla
Quote
Everyone that you see was built, not in one, but in
several forms; they have been experimented with and records
have been obtained with them. Among these bulbs I have a
great number of receiving devices, and some of them come
remarkably close to those which others have used since.

Quote
Counsel
Is that drawing [Fig. 94] a part of the patent application
or intended for an application?

Tesla
Yes, but it was never filed.

Tesla
Quote
It is well known that certain radiations(Emission)—such as those of ultra-violet light, cathodic, Roentgen rays, or the like—possess the property of charging and discharging conductors of electricity, the discharge being particularly noticeable when the conductor upon which the rays impinge is negatively electrified. These radiations are generally considered to be ether vibrations of extremely small wave lengths, and in explanation of the phenomena noted it has been assumed by some authorities that they ionize or render conducting the atmosphere through which they are propagated. My own experiments and observations, however, lead me to conclusions more in accord with the theory heretofore advanced by me that sources of such radiant energy throw off with great velocity minute particles of matter which are strongly electrified, and therefore capable of charging an electrical conductor, or, even if not so, may at any rate discharge an electrified conductor either by carrying off bodily its charge or otherwise.

Tesla
Quote
A simple way of supplying Positive or Negative electricity to the terminal is to connect the same either to an insulated conductor supported at some height in the atmosphere(Positive) or to a grounded(Negative) conductor, the former, as is well known, furnishing positive and the latter negative electricity. As the rays or supposed streams of matter generally convey a positive charge to the first condenser-terminal, which is connected to the plate or conductor above mentioned, I usually connect the second terminal of the condenser to the ground(Earth), this being the most convenient way of obtaining negative electricity, dispensing with the necessity of providing an artificial source. In order to utilize for any useful purpose the energy accumulated in the condenser, I furthermore connect to the terminals of the same a circuit including an instrument or apparatus(Kapanadze Outer Blue Coil) which it is desired to operate and another instrument or device for alternately closing and opening the circuit(Spark Gap). This latter may be any form of circuit-controller, with fixed or movable parts or electrodes(Spark Gap), which may be actuated either by the stored energy or by independent means.

That is the answer to those all speculation..


Meow ;D






Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5134 on: September 16, 2014, 05:38:23 AM »
Output coil in Ruslan latest divice is like Kapanadze blue coil. But I try that coil and not get overunity. Here no magic coil probarly. Here need made properly ajustion. Just one coil like Ruslan not give to you overunity.
 :)

Hi MenofFather. Sure, I agree that the coil itself will probably not give overunity, but it may be an
important piece that is required to achieve overunity. Ok on your test result regarding this.
All the best...

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5135 on: September 16, 2014, 05:40:55 AM »
In way Akula and Ruslan is using that is making standing wave inside of bifilar with one end from induction cooker style source + nanopulse source (from generator or filtered out Tesla coil signal to make huge 35kV+ spike on peaks for antenna) and another end as Earth for electrons pump...

 And the concept used there is only one and best exlained by Tesla:
http://www.ussdiscovery.com/corum/corum/corum.htm

"...it became apparent that the fireballs resulted form the interaction of two frequencies, a stray higher frequency wave imposed on the lower frequency oscillations of the main circuit.... This condition acts as a trigger which may cause the total energy of the powerful longer wave to be discharged in a infinitesimally small interval of time and the proportionately tremendously great rate of energy movement which cannot confine itself to the metal circuit and is released into surrounding space with inconceivable violence.

It is but a step, from the learning how a high frequency current can explosively discharge a lower frequency current, to using the principle to design a system in which these explosions can be produced by intent." -N. Tesla

Hi T-1000.  Interesting. Yes, I will be experimenting with high frequency, high voltage pulses, as that seems to
be important in this arrangement.
All the best...

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5136 on: September 16, 2014, 09:36:00 AM »
"...Any tips on how the secondary should be wound to match what Akular/Ruslan are doing?"
Output coil in Ruslan latest divice is like Kapanadze blue coil. But I try that coil and not get overunity. Here no magic coil probarly. Here need made properly ajustion. Just one coil like Ruslan not give to you overunity.


 :)

What is your high frequency and what is your wire outer diameter (bifi)?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5137 on: September 16, 2014, 03:35:56 PM »
   MenofFather:
   The tips have already been given by Ruslan and Akula. You understand what they are saying, not like some of us.
   You need to match the Kacher crt frequency to the induction heater circuit output, so that the pulses aline on the peaks.   Have you tried to do this? 
If so, were you able to match up the peaks together, or not?
 
  Without the two systems matching frequencies, or harmonics, there is only two inverters connected together, without any extra energy extracted from the ambient.
  Are you connected to an earth ground that is over 10 meters long?

   As there are several versions of the Kapanadze/Akula/Ruslan air coil, which coil version did you use?
  Ruslan's newest version of his air coils, use less turns. But, the magnetic cancelling effect may be very important, for a proper self runner.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5138 on: September 16, 2014, 08:51:30 PM »
  Without the two systems matching frequencies, or harmonics, there is only two inverters connected together, without any extra energy extracted from the ambient.
  Are you connected to an earth ground that is over 10 meters long?

No need for 10 meters ground wire as the inductance of the wire is measured in a way which allow to match resonant frequency with the standing wave what gets created inside of bifilar coil - this was explanation by Akula in one of recent videos - http://www.youtube.com/watch?v=-rALEpvBQig


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5139 on: September 17, 2014, 03:42:28 AM »
   I watched that Akula video a couple of times, but, I really can't understand what he is saying.  It seams like a very important explanation of his second self runner crt.  I really wish that I could understand it.
  But, if the ground connection doesn't have to be over 10m long, then why does he have a long ground cable running to his metal pipe that is next to a water source. On ALL his higher output devices???  Just a coinsidence, I guess...

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5140 on: September 17, 2014, 01:16:27 PM »
What is your high frequency and what is your wire outer diameter (bifi)?
I try many hight frenquncies. 2 megaherc, 1 megaherc, 4 kiloherc.
" what is your wire outer diameter (bifi)?"
About that coil you speak?  About outup? If yes, then I try many output coil one is 2.5 mm2, other is about 1mm2, I not meashure wire diameter, maybe 4 mm in 2.5 mm2 wire, other maybe 2 mm.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5141 on: September 17, 2014, 01:27:04 PM »
   MenofFather:
   The tips have already been given by Ruslan and Akula. You understand what they are saying, not like some of us.
   You need to match the Kacher crt frequency to the induction heater circuit output, so that the pulses aline on the peaks.   Have you tried to do this? 
If so, were you able to match up the peaks together, or not?
 
  Without the two systems matching frequencies, or harmonics, there is only two inverters connected together, without any extra energy extracted from the ambient.
  Are you connected to an earth ground that is over 10 meters long?

   As there are several versions of the Kapanadze/Akula/Ruslan air coil, which coil version did you use?
  Ruslan's newest version of his air coils, use less turns. But, the magnetic cancelling effect may be very important, for a proper self runner.
Kacher not have pulses, it have sine on secondary. So I think, here not need much pulses on peak of low frenquency sine.
"   The tips have already been given by Ruslan and Akula."
I akula tips translate to you, you also can translate with translator. Other that they saying is nothing important or blurly saying.
" Are you connected to an earth ground that is over 10 meters long?"
I tryed conect diferent groud lenght wires.
" As there are several versions of the Kapanadze/Akula/Ruslan air coil, which coil version did you use?"
Here is not easy explain. I try diferent coil. One coil like Ruslan in his latest video. Other coil like in akula schematic, but little diferent with 3 layers. But I think here key for overunity is not magic wound coil, but proper ajustion kacher with output coil, you must play with kacher windings, or with output coil windings and self capasistance and induction. But maybe I wrong.
Dally divice not have magnetic canseling efect and he get overunity, so probarly magnetic canseling efect is not wery important.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5142 on: September 17, 2014, 01:30:33 PM »
   I watched that Akula video a couple of times, but, I really can't understand what he is saying.  It seams like a very important explanation of his second self runner crt.  I really wish that I could understand it.
  But, if the ground connection doesn't have to be over 10m long, then why does he have a long ground cable running to his metal pipe that is next to a water source. On ALL his higher output devices???  Just a coinsidence, I guess...
Akula never say, that grounding not must be over 10 meter long.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5143 on: September 17, 2014, 01:35:24 PM »
I akula tips translate to you, you also can translate with translator. Other that they saying is nothing important or blurly saying.
what translator works on sound file?

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5144 on: September 17, 2014, 03:02:04 PM »
what translator works on sound file?
I mean translator for Ruslan words in diferent places. That akula saying I translate. He much speaking, but wery small saying practical things.