Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719736 times)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5115 on: September 13, 2014, 07:26:49 PM »
hi Jeg,

I think you are right on using resistor 7.5ohms in parallel with diode for around 25volts supply.I do admit it's a uncommon setup.

150 ohms is more suited for around 600volts...1200volts coupled with hv diode.

Ruslan uses a 4007 diode in series with the capacitor. I used a quicker diode for being sure that will follow the quick oscillation. I intent to raise this 600khz to 2 MHz by using 6turns half primary, and lower capacitor. Do you know if the yoke ferrite will be able to follow this frequency?

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5116 on: September 14, 2014, 04:17:40 AM »

Ruslan talking about various akula schematics... the last is a royer driver... but needs translation...

https://www.youtube.com/watch?v=7_z_cqygQK8

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5117 on: September 14, 2014, 06:24:02 AM »
  The Fet driver circuit is not really like the Royer, or Mazilli, nor even like what Akula uses. But, it looks simple enough, if it's just a cap in series with the IN4007 diode.  I don't see the two small 6.2v zeners that the previous diagram used.

  I don't understand most of that Ruslan is saying on the video. But, it looks like he's boxing up a new Akula type circuit, that he was still working on. Only two fans on the Fets, and no fan on the Kacher transistor. So the kacher crt must be able to run cool.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5118 on: September 14, 2014, 06:36:17 AM »
  The Fet driver circuit is not really like the Royer, or Mazilli, nor even like what Akula uses. But, it looks simple enough, if it's just a cap in series with the IN4007 diode.  I don't see the two small 6.2v zeners that the previous diagram used.

  I don't understand most of that Ruslan is saying on the video. But, it looks like he's boxing up a new Akula type circuit, that he was still working on. Only two fans on the Fets, and no fan on the Kacher transistor. So the kacher crt must be able to run cool.
D1/D2 are crossover diodes
D3/D4 are zeners... Z lines are kinda unclear but they are marked that way




https://www.youtube.com/watch?v=wBW_LuiY2ro  I guess this is 'romancorp' schematic implementation.  And no ground.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5119 on: September 14, 2014, 11:32:39 AM »
Hi MenofFather. Do you mean that Ruslan did not post that schematic?
Of cors.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5120 on: September 14, 2014, 12:32:10 PM »

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5121 on: September 14, 2014, 02:05:45 PM »
hi everyone,

It seems i can't help noticing there seems to be some similarity between "tesla magnifying transmitter" and comparing against Ruslan and Akula device.

If you noticed both Ruslan & Akula device do have a "large outer ring of coil"  which looks like "mini primary outer coil" version of "tesla magnifying transmitter" both which needs "earth grounding" to work effectively.

---
This is just theory for me we know that radio receiver can work in khz to mhz range but we can only listen to the sound which was superimpose on the high frequency carrier.

I am not sure if i am right to say this- these ou device at the receiving stage is actually getting only the "lower frequency 2 phase or 3 phase version" which was being transmitted by the "mini tesla magnifying transmitter",once receiver is tuned in resonance with the transmitter.

In another words if i am right these device is actually comprise of powerful radio transmitter and receiver all wound into one big coil.

Ruslan is also a RF engineer whom understood easily what method Akula is using to achieve ou.
 

a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5122 on: September 14, 2014, 10:27:11 PM »
hi everyone,

It seems i can't help noticing there seems to be some similarity between "tesla magnifying transmitter" and comparing against Ruslan and Akula device.

If you noticed both Ruslan & Akula device do have a "large outer ring of coil"  which looks like "mini primary outer coil" version of "tesla magnifying transmitter" both which needs "earth grounding" to work effectively.

---
This is just theory for me we know that radio receiver can work in khz to mhz range but we can only listen to the sound which was superimpose on the high frequency carrier.

I am not sure if i am right to say this- these ou device at the receiving stage is actually getting only the "lower frequency 2 phase or 3 phase version" which was being transmitted by the "mini tesla magnifying transmitter",once receiver is tuned in resonance with the transmitter.

In another words if i am right these device is actually comprise of powerful radio transmitter and receiver all wound into one big coil.

Ruslan is also a RF engineer whom understood easily what method Akula is using to achieve ou.


The technical term is stochastic mixing.

stupify12

  • Full Member
  • ***
  • Posts: 175
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5123 on: September 15, 2014, 02:36:56 AM »
Tesla
Quote
The scientists of today think deeply instead of clearly. One must be sane to think clearly, but one can think deeply and be quite insane.

Quote
It is paradoxical, yet true, to say, that the more we know, the more ignorant we become in the absolute sense, for it is only through enlightenment that we become conscious of our limitations.



The technical term is stochastic mixing.

stupify12

  • Full Member
  • ***
  • Posts: 175
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5124 on: September 15, 2014, 02:44:39 AM »
What you notice is correct, because all free energy devices works from the principle of Nikola Tesla.

One simple question is what happen to a "larger outer ring of coil" when you short it out faster in a power source?

The grounding thing is necessary so you can harvest negative electricity from the ground, and for the antenna on the air.

The output stage people do like to tuned it into resonance when you can control it with proper switching like Tesla always showed on his devices.

The answer to your question and still being blinded by the more knowledge that we gain. Search this word and relate it to the work of Nikola Tesla  " Edison Effect"

Meow   :D

hi everyone,

It seems i can't help noticing there seems to be some similarity between "tesla magnifying transmitter" and comparing against Ruslan and Akula device.

If you noticed both Ruslan & Akula device do have a "large outer ring of coil"  which looks like "mini primary outer coil" version of "tesla magnifying transmitter" both which needs "earth grounding" to work effectively.

---
This is just theory for me we know that radio receiver can work in khz to mhz range but we can only listen to the sound which was superimpose on the high frequency carrier.

I am not sure if i am right to say this- these ou device at the receiving stage is actually getting only the "lower frequency 2 phase or 3 phase version" which was being transmitted by the "mini tesla magnifying transmitter",once receiver is tuned in resonance with the transmitter.

In another words if i am right these device is actually comprise of powerful radio transmitter and receiver all wound into one big coil.

Ruslan is also a RF engineer whom understood easily what method Akula is using to achieve ou.

a.king21

  • Hero Member
  • *****
  • Posts: 1650
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5125 on: September 15, 2014, 04:01:20 AM »
You can also harvest positive electricity from the ground. If you statically charge a rod with negative electricity it will be neutralized by an inrush of positive electricity from the ground.
Something to ponder.
You can harvest the inrush via a trafo as per Benitez.

Dave45

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5126 on: September 15, 2014, 01:30:05 PM »
If you want to pull energy from the ground you have to attract it.

zcsaba77

  • Full Member
  • ***
  • Posts: 245
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5127 on: September 15, 2014, 02:02:00 PM »
If you want to pull energy from the ground you have to attract it.

Various theory of energy pulling from ground, but noone who reach OU not show us how and which direction goes electron from or to ground, only they can show us, if electrons goes just one direction correct puted diode between ground and (tesla) coil will change effect in aparatus, if puted and stop working theory is wrong!

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5128 on: September 15, 2014, 04:18:08 PM »
  I put a diode on my earth ground connection that goes to the Kacher, that I use on my Mazilli crt.  No change in the way that the Kacher works, and not much added brightness to the bulb, in either direction of the diode.
But, it looks like this ground energy is able to go through the diode, even if  placed in either polarity.
  I don't think that there is much energy to be had from the Ground itself.
But, there must be energy coming from the ambient, like Tesla said, instead.
The ground connection just allows the ambient energy to be useable.
But, a ground is not absolutely needed, (like Akula showed).
Although a ground tie can add some power to the circuit if the ground connection is working like an antenna, (maybe). But, it  must be over 30 feet long, or so. Ruslan mentioned a ground line of 37.5 meters long. 
  Akula always connects his ground line to a water source, for a reason.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5129 on: September 15, 2014, 05:37:15 PM »
I like to do a basic circuit setup when experimenting to get a baseline of what is normal, 
before making changes to coils etc. so I have a baseline to compare my changes to.
In the following test I used an ordinary ZVS driver to about a 6 turn primary, to about
a 40 turn secondary on an air core. The ZVS driver was producing a sinewave at about 42.7 KHz.
The secondary winding on this air core transformer connects directly to a 50 ohm power resistor,
with one end of the power resistor connected to earth ground. I placed another separate coil in close
proximity to my air core transformer, and put a 4.5 MHz sinewave signal on this other coil powered at about
10 Watts, so the air core transformer was being radiated strongly by the 4.5 MHz RF signal.
What I ended up with was AM Modulation. Efficiency of this particular basic test arrangement is really poor.

Approx. ZVS driver power consumption was:
13VDC x 6A = 78 Watts

4.5 MHz signal was 10 Watts

Approx. Power delivered to 50 ohm power resistor with just the ZVS driver turned on:
(36.8 Vrms)^2 / 50 = 27 Watts

Approx. Power delivered to 50 ohm power resistor with both ZVS driver and 4.5 MHz signal turned on:
(39.2 Vrms)^2 / 50 = 30.7 Watts

Approx. Efficiency with both ZVS driver and 4.5 MHz signal applied:
30.7W / (78W + 10W) = 35%

I could probably improve efficiency somewhat by optimizing the transformer windings, etc. but this test
was just to get an idea what happens when I place an air core transformer being driven by a ZVS Driver (42.7 KHz)
in the strong near field of an RF (sinewave) signal in the low MHz (4.5 MHz) range. As mentioned, I seem to have ended
up with AM modulation. 

I have attached my test circuit arrangement schematic and a couple of scope shots showing the waveforms across the 50 ohm load.

I also tried this same test using a secondary in an opposing bifilar winding connection arrangement, but I got very little
transfer of the ZVS 42.7 KHz signal to the load. Since in bifilar opposing arrangement the resulting inductance of the secondary coil
is very low, it is not surprising that there would be little inductive coupling from the primary to the secondary at 42.7 KHz.

Next step will be to wind a secondary coil like Akula/Ruslan are apparently using, although I don't know if the schematics posted show
these windings accurately. Any tips on how the secondary should be wound to match what Akular/Ruslan are doing?