Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715709 times)

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5085 on: September 09, 2014, 04:08:48 PM »
In last part talking of not important things, about that choke on ferite road, who is betwen secondary kacher coil and antena.
That  choke making wery fast rise time, it compressing and making 36 kilovolts or more pulse, but I not bealive in that.
Ruslan say, that sometimes without it (choke) better work.
But all depends on ground.

Thanks MenofFather for taking the time to explain about these videos.
That really helps. So Akula said he was using the choke to make his HV pulses.
That is interesting. All indications are that Akula based his first couple of self running devices
closely on Daly's device. Ruslan based his device closely on Akula's device and on Daly's device as well.
All three of these devices seem to work on the same principle. I will do some experimenting
with this and see if I can get anything interesting. If there really is something to this, it shouldn't
be too much longer before other people start to get some results of some sort as well. :)
All the best...


Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5087 on: September 09, 2014, 05:15:21 PM »
Hi Acca. Thanks for posting those Ruslan comments.
Every little bit of info may help.
All the best...


Acca

  • Hero Member
  • *****
  • Posts: 563
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5088 on: September 09, 2014, 11:50:27 PM »

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5089 on: September 09, 2014, 11:57:46 PM »
Rusaln Kulabuhov free energy device 
 
https://www.youtube.com/channel/UCwVT-3hF29an4vZOz7nGOwg
below is the latest coil form of Ruslan..
http://www.realstrannik.ru/forum/39-kapanadze/134930-ustanovka-ruslana-kulabuxova.html?start=1080#236944 -
"Святолуг ,ну что вы тут ищите ? Витки считаете ?  (http://www.realstrannik.ru/media/kunena/emoticons/laughing.png)  Индуктор намотан проводом 11 м 2,5 мм поверх обычной биф-катушки. Она тоже 2,5мм проводом намотанна (http://www.realstrannik.ru/media/kunena/emoticons/unsure.png)  Индуктор в резонансе на частоте 17,2 кГц
 Качер тут для разгона частиц и разгрузки инвертора. Он заряжает катушку и от туда прибавка. Принцип тот же что и с наносекундами. Просто я выкинул наники нафиг (http://www.realstrannik.ru/media/kunena/emoticons/dizzy.png)  Заколебало постоянно менять транзистор. С другими не работало... Что ещё рассказать ?
 Ок !  Генератор пуш-пул обычный (http://www.realstrannik.ru/media/kunena/emoticons/wassat.png)  Можно на ТЛ494 собрать  (http://www.realstrannik.ru/media/kunena/emoticons/wink.png) Мотаем феррит : для пуш-пул по 6 витков (2 вольта виток) 28 витков 4мм провода для энергии через катушку , 3 витка для резонанса ЛЦ и кондёры 0,47мкф 2штуки + ещё один надо паралельно подобрать... Может и не надо будет. Далее ...
 Блок питания -импульсник 3-6 ампер 12 вольт хватает вполне (http://www.realstrannik.ru/media/kunena/emoticons/whistling.png) Пропеллер от компа 12 вольт для охлождения. Качер (не очень хорошая задумка) Бровина на частоту до 2х МГц !!! Надо подобрать по катушке в резонанс. Вот тут пороаботайте головой (http://www.realstrannik.ru/media/kunena/emoticons/wassat.png) Например конкретно в этой системе 37,5 м длинна провода или 1/2 волны !!! То есть катушка настроена как полуволновая антена на 4 МГц , ищем резонансную частоту. Она была у меня 2 МГц  (http://www.realstrannik.ru/media/kunena/emoticons/blush.png)
 А дальше проще не бывает.... подрубаем осла и начинаем сводить всё в кучу. Земля (провод) тоже 1/2 волны от 37,5 м =18....М ! Надо создать отражёнку вкатушке и чем больше , тем лучше  (http://www.realstrannik.ru/media/kunena/emoticons/w00t.png)  Мощность больше будет + прибавка  (http://www.realstrannik.ru/media/kunena/emoticons/wink.png) Импульсы по осциллографу смотрим , чтобы попадали именно в горбик синуса. Чтобы вообще получить чёткий импульс ,нужен наносекундник. Из Теслы можно всё это получить ! Сделать её управляемой. Тут очень хорошо подойдёт схема Акулы (Романа) , он её демонстрирует в видео. Конкретно часть накачки самой теслы + индуктивная катушка + антена над индуктором. Если вы сложите моё пояснение + видео Акулы всё должно получиться  (http://www.realstrannik.ru/media/kunena/emoticons/wink.png)  Но на выходе этой установки будет не 50 Гц , а частота накачки 17...кГц. Опять же оговорюсь (http://www.realstrannik.ru/media/kunena/emoticons/wassat.png)  Система работает при хорошем заземлении. Земля нужна хорошая ! В этой установки у меня появился хороший плюс  (http://www.realstrannik.ru/media/kunena/emoticons/smile.png)  Больше не сгорает блок питания приобрыв земли. Она просто останавливается.
"

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5090 on: September 11, 2014, 08:58:19 AM »
http://www.realstrannik.ru/forum/39-kapanadze/134930-ustanovka-ruslana-kulabuxova.html?start=1080#236944 -
"Святолуг ,ну что вы тут ищите ? Витки считаете ?  (http://www.realstrannik.ru/media/kunena/emoticons/laughing.png)  Индуктор намотан проводом 11 м 2,5 мм поверх обычной биф-катушки. Она тоже 2,5мм проводом намотанна (http://www.realstrannik.ru/media/kunena/emoticons/unsure.png)  Индуктор в резонансе на частоте 17,2 кГц
 Качер тут для разгона частиц и разгрузки инвертора. Он заряжает катушку и от туда прибавка. Принцип тот же что и с наносекундами. Просто я выкинул наники нафиг (http://www.realstrannik.ru/media/kunena/emoticons/dizzy.png)  Заколебало постоянно менять транзистор. С другими не работало... Что ещё рассказать ?
 Ок !  Генератор пуш-пул обычный (http://www.realstrannik.ru/media/kunena/emoticons/wassat.png)  Можно на ТЛ494 собрать  (http://www.realstrannik.ru/media/kunena/emoticons/wink.png) Мотаем феррит : для пуш-пул по 6 витков (2 вольта виток) 28 витков 4мм провода для энергии через катушку , 3 витка для резонанса ЛЦ и кондёры 0,47мкф 2штуки + ещё один надо паралельно подобрать... Может и не надо будет. Далее ...
 Блок питания -импульсник 3-6 ампер 12 вольт хватает вполне (http://www.realstrannik.ru/media/kunena/emoticons/whistling.png) Пропеллер от компа 12 вольт для охлождения. Качер (не очень хорошая задумка) Бровина на частоту до 2х МГц !!! Надо подобрать по катушке в резонанс. Вот тут пороаботайте головой (http://www.realstrannik.ru/media/kunena/emoticons/wassat.png) Например конкретно в этой системе 37,5 м длинна провода или 1/2 волны !!! То есть катушка настроена как полуволновая антена на 4 МГц , ищем резонансную частоту. Она была у меня 2 МГц  (http://www.realstrannik.ru/media/kunena/emoticons/blush.png)
 А дальше проще не бывает.... подрубаем осла и начинаем сводить всё в кучу. Земля (провод) тоже 1/2 волны от 37,5 м =18....М ! Надо создать отражёнку вкатушке и чем больше , тем лучше  (http://www.realstrannik.ru/media/kunena/emoticons/w00t.png)  Мощность больше будет + прибавка  (http://www.realstrannik.ru/media/kunena/emoticons/wink.png) Импульсы по осциллографу смотрим , чтобы попадали именно в горбик синуса. Чтобы вообще получить чёткий импульс ,нужен наносекундник. Из Теслы можно всё это получить ! Сделать её управляемой. Тут очень хорошо подойдёт схема Акулы (Романа) , он её демонстрирует в видео. Конкретно часть накачки самой теслы + индуктивная катушка + антена над индуктором. Если вы сложите моё пояснение + видео Акулы всё должно получиться  (http://www.realstrannik.ru/media/kunena/emoticons/wink.png)  Но на выходе этой установки будет не 50 Гц , а частота накачки 17...кГц. Опять же оговорюсь (http://www.realstrannik.ru/media/kunena/emoticons/wassat.png)  Система работает при хорошем заземлении. Земля нужна хорошая ! В этой установки у меня появился хороший плюс  (http://www.realstrannik.ru/media/kunena/emoticons/smile.png)  Больше не сгорает блок питания приобрыв земли. Она просто останавливается.
"

Acca, T1000, thanks for doing this! I see that Ruslan is really helping to implement his work! Do you know please what the following words mean?

"we must create OTRAZHENKU VKATUSHKE"

"CLEAR IMPETUS"

In addition, at this new schematic that you posted...
a) what TR2 with 40 turns secondary is doing there?
b) Do you know what is the DC voltage supply at the primary of his yoke at 6+6 turns middle tap?

Thanks again

 

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5091 on: September 11, 2014, 10:58:41 AM »
hi,

It seems i unable co relate this portion of the circuit if i compared against the Ruslan\Dally circuit diagram.

The variable 10uH was the one with or without ferrite rod(MW Radio) but this part do tally with circuit diagram.If you count the air core it's around 8 turns(4CW,4CCW)
Hint- 1 wire air loop is around 1uH.

We need to connect all the missing dots together before we can proceed with the next stage to understand how this "baby" work.


 

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5092 on: September 11, 2014, 12:03:31 PM »
hi,

Hey Mag
I read your post about using high dc voltage up to 300V supplying the 2 mosfet gen. My difficulty is that i can't find 1000 and 2200uF electrolytic caps for the system at this high voltage rating. Any idea what to do or what to search about?

Thanks

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5093 on: September 11, 2014, 02:23:09 PM »
Hey Mag
I read your post about using high dc voltage up to 300V supplying the 2 mosfet gen. My difficulty is that i can't find 1000 and 2200uF electrolytic caps for the system at this high voltage rating. Any idea what to do or what to search about?

Thanks

hi Jeg,

No worries the highest electrolytic capacitor is 450volts which i used for my variable HV Supply project.

Base on attached schematic it's 400volts 180uf.
But honestly i don't know which caps were you talking about. :)



I think there is key pointers which i think was left out by Akula and Ruslan.
"This is something to do with traveling faster than speed of light in the coil" Using calculation to verify if this effect was achieved.

Please watch this video from China created by a english speaking engineer.

Convert Tesla's Cold Electricity to Normal Electricity Part I
http://www.youtube.com/watch?v=WJUfj53geBo

     
Convert Tesla's Cold Electricity to Normal Electricity Part II      
 http://www.youtube.com/watch?v=BdBjKVyKBZA



----------------
I doubt i will proceed with this replication project once i have successfully completed my costly project "Don Smith China replication" which is based on high frequency 220khz...230khz.(LW)

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5094 on: September 12, 2014, 12:45:53 PM »

 Do you know please what the following words mean?

"we must create OTRAZHENKU VKATUSHKE"

"CLEAR IMPETUS"

In addition, at this new schematic that you posted...
a) what TR2 with 40 turns secondary is doing there?
b) Do you know what is the DC voltage supply at the primary of his yoke at 6+6 turns middle tap?

Thanks again

Thanks Mag, i will check those videos tonight. Found some caps at 330uF/400V from an old tv "cemetery". I'll go with them..

In the meanwhile, i re-post my questions. If someone knows Russians to translate i will appreciate it!

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5095 on: September 12, 2014, 01:08:23 PM »
"we must create OTRAZHENKU VKATUSHKE""
"we must create reflection in coil"

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5096 on: September 12, 2014, 01:10:31 PM »
In addition, at this new schematic that you posted...
a) what TR2 with 40 turns secondary is doing there?
b) Do you know what is the DC voltage supply at the primary of his yoke at 6+6 turns middle tap?

Hi Jeg. Ruslan's device appears to be closely based on Akula's second self runner.
If you look at the schematic Akula made for this device, it shows the same transformer
winding going back to his inverter driver. Ruslan may have copied from Akula's schematic
and modified it, but I don't know if Ruslan is actually using that transformer in his own device.
See the relevant section in the attached excerpt from Akula's schematic.
All the best...


Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5097 on: September 12, 2014, 02:13:54 PM »
See the relevant section in the attached excerpt from Akula's schematic.
All the best...

Void, you are a really good detail tracer! Thanks a lot.
Menof.. ;)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5098 on: September 12, 2014, 03:58:15 PM »
  I believe that the 40 turns coil that goes back to the inverter, is used only for the feed back path. 
  As the bigger coil of the yoke's two secodary coils is showing only 30 to 60 volts output to the air coil. The other (3 turns) secondary yoke coil's output must be lower voltage but higher amps than that. But, then how can he light a 220v 10watt bulb, from the output of the 60 volt output coil, which is also rectified to DC?
 Does not make sense to me.

  Guys, you are comparing two different schematics from two different type of devices. The schematic that Ruslan uses now for his more resent Akula second video type replication, is not the same as the one that he used for his earlier Daly device replication.

corry

  • Newbie
  • *
  • Posts: 27
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5099 on: September 12, 2014, 04:41:43 PM »