Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719245 times)

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4455 on: June 23, 2014, 12:15:35 PM »
If everyone had to have a working device before posting any ideas to consider, this would be a pretty quiet forum...


https://www.youtube.com/watch?v=8I1NRbPl4P4

00

  • Full Member
  • ***
  • Posts: 119
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4456 on: June 23, 2014, 06:41:47 PM »
Dear 00
What do you say about the directions that X-name43 mentions at the above picture with the blue coil? I ask because I like your output coil explanations, but this blue coil's first and second layer doesn't follow the rule that you described about non inductive coil

a tesla coil is a high voltage coil at the top and ampere at the bottom that is ground. if we want to take output from tesla coil we must reduce voltage and that is done by reverse direction coiling so as to maintain 220 volt output. do it any way in any layer.

moreover since the whopping hv pulses also increase the voltage of the final 3rd coil tesla coil it adds more voltage so reverse direction coiling helps.


00

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4457 on: June 24, 2014, 03:14:36 AM »
I'm sorry; I am still feeling animostic...
So you're saying stivep1 is mislabeling his devices???
https://www.youtube.com/watch?v=-04V_NIrC0k
[/font]




You perfecty right I did mislabel at  0:52 MINUTE
WATCH LINK
https://www.youtube.com/watch?v=-04V_NIrC0k#t=52


inverter is not 12V to 220 but  it should be  220V to 12V










The primary question and problem we have in all of that concept devices is that in Daly  L4 goes to ractifier and  after rectifiers there is bank of capacitors  so at the end we have close to DC 220V or more going to  light bulb  and than  it should go to switching power supply,
 It CAN NOT!!! as we have DC no AC at light bulb terminals.So we have the same DC 220V at input of  switching power supply.


did you get  the problem right?














Wesley




d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4458 on: June 24, 2014, 03:20:51 AM »

The primary question and problem we have in all of that concept devices is that in Daly  L4 goes to ractifier and  after rectifiers there is bank of capacitors  so at the end we have close to DC 220V or more going to  light bulb  and than  it should go to switching power supply,
 It CAN NOT!!! as we have DC no AC at light bulb terminals.So we have the same DC 220V at input of  switching power supply.

did you get  the problem right?
Wesley
the first thing in most switching power supplies is a rectifier and then a cap, so it functions off of DC, and they are often not transformer based  (which needs AC).


could gain a small percent bypassing the internal rectifier since it's already rectified; but probably not worth the work.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4459 on: June 24, 2014, 04:44:46 AM »
   T-1000:
   Thanks for the links. I was hoping to see the several Kw device that you had mentioned, instead of Ruslan's 30 watt unit, but I understand that it's the air core windings that we are really discussing at this time. As possibly none of the schematics are correct, or to be trusted as shown.
  As I don't understand Russian, I'll do the best I can, usually that's not good enough though.
 I will view all of your posted video links when I have a chance.


   Wesley: I had thought that you mentioned in the Akula's last home video that it was a 1500 watt device, the same device that was shown in Akulas second video which was 1150w.
I'm not trying to be critical my friend, just wanted to know if he had been able to up the output to 1500 watts, from the previous 1150, or not. That was my question.
   I understand that the output scheme shown on the posted Ruslan schematic is not correct, which was another thing that had me wondering... Thanks for the clarification.
   As we are going back and forth discussing different circuits and ideas, it can all get quite confusing at times, at least for me.

  All: I just made another video showing my Mazilli/yoke circuit running along with a separate ferrite cored HV pulser circuit, which is connected onto the output side of the yoke core.
This is to test  the superimposition of the two different currents working together. As well as a connected feed-back path, which is going to the input side of the Mazilli oscillator.
 I'll be posting a link to that video tomorrow.

00

  • Full Member
  • ***
  • Posts: 119
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4460 on: June 24, 2014, 04:32:23 PM »
[/font]




You perfecty right I did mislabel at  0:52 MINUTE
WATCH LINK
https://www.youtube.com/watch?v=-04V_NIrC0k#t=52


inverter is not 12V to 220 but  it should be  220V to 12V










The primary question and problem we have in all of that concept devices is that in Daly  L4 goes to ractifier and  after rectifiers there is bank of capacitors  so at the end we have close to DC 220V or more going to  light bulb  and than  it should go to switching power supply,
 It CAN NOT!!! as we have DC no AC at light bulb terminals.So we have the same DC 220V at input of  switching power supply.


did you get  the problem right?














Wesley


corrected!

the rf band contains dual band and when rectified still gives one ac waveform. radios do this by single half wave rectifier. to keep one band with modulation audio intact and filter the rf waveform so we hear sound in a reciever of the radio.

yes the voltage must be 220/110 volt depending on the country in the output of 3rd coil.


the circuit stage is correct and is  valid. the output is ac even after full wave rectification!

this is fed to the smps ac inlet and 12 v dc  is fed to the input to replace battery for feed back.



00

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4461 on: June 24, 2014, 07:41:42 PM »

corrected!

the rf band contains dual band and when rectified still gives one ac waveform. radios do this by single half wave rectifier. to keep one band with modulation audio intact and filter the rf waveform so we hear sound in a reciever of the radio.

yes the voltage must be 220/110 volt depending on the country in the output of 3rd coil.


the circuit stage is correct and is  valid. the output is ac even after full wave rectification!

this is fed to the smps ac inlet and 12 v dc  is fed to the input to replace battery for feed back.



00


I need my friend you to say more and put drawings here or make video explaining that.
I sort of get picture but not quite yet.


http://www.eecs.tufts.edu/~dsculley/tutorial/diodes/diodes3.html




======================================================================================









http://www.eecs.tufts.edu/~dsculley/tutorial/diodes/diodes4.html
Quote
Rectifiers Challenge
First, create an AC signal source. You can do by using a function generator with no DC bias. Or, you can take the output of an RCX pulsing a square wave, and run that through a blocking cap to remove the DC bias. View your signal to confirm that it crosses the 0V line symmetrically.
Then rectify your signal, first with a half-wave rectifier, and then with a full-wave rectifer. Use 1N914 diodes, or something similar.
View your output waves to make sure that the circuit behaves as it should. Can you see the diode drop?

============================================================================================



d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4462 on: June 24, 2014, 07:46:45 PM »

I need my friend you to say more and put drawings here or make video explaining that.
I sort of get picture but not quite yet.


http://www.eecs.tufts.edu/~dsculley/tutorial/diodes/diodes3.html
While could be pulsed DC... with that much capacitance the switching power supply isn't likely to see that


https://www.google.com/search?q=switching+power+supply+schematic&rlz=1C1CHFX_enUS519US519&espv=2&tbm=isch&tbo=u&source=univ&sa=X&ei=9bipU5fxB9PqoATrt4LoBg&ved=0CBwQsAQ&biw=1259&bih=719


Look... hundreds of schematics for power supplies... on the first page I see 17, and only 3 don't have a rectifier internally... and I woudl bet that those 3 are inside and are based on a DC input in the first place



stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4463 on: June 24, 2014, 07:54:53 PM »
While could be pulsed DC... with that much capacitance the switching power supply isn't likely to see that


https://www.google.com/search?q=switching+power+supply+schematic&rlz=1C1CHFX_enUS519US519&espv=2&tbm=isch&tbo=u&source=univ&sa=X&ei=9bipU5fxB9PqoATrt4LoBg&ved=0CBwQsAQ&biw=1259&bih=719


Look... hundreds of schematics for power supplies... on the first page I see 17, and only 3 don't have a rectifier internally... and I woudl bet that those 3 are inside and are based on a DC input in the first place




Are you talking about 220DC? or 110DC? being delivered to ATX from  Daly schematic and than turning to DC 12V
Please explain what you relating to using similar method as  I did in the link above




Wesley

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4464 on: June 24, 2014, 08:08:26 PM »



   Wesley: I had thought that you mentioned in the Akula's last home video that it was a 1500 watt device, the same device that was shown in Akulas second video which was 1150w.
I'm not trying to be critical my friend, just wanted to know if he had been able to up the output to 1500 watts, from the previous 1150, or not. That was my question.
   I understand that the output scheme shown on the posted Ruslan schematic is not correct, which was another thing that had me wondering... Thanks for the clarification.
   As we are going back and forth discussing different circuits and ideas, it can all get quite confusing at times, at least for me.

 






The 1500W mentioned  have been direct translation  of Akula words.
I can see him being excited as he was heaving Stefanov  who was a money man in his house.
Akula was trying to sell  his importance and his device ( but not quite) and Stefanov was potential buyer.
Akula wanted to get money, connection to outside world of money and prosperity.Stefanov was the one who has wealthy sponsor from Germany.
Akula did not want to lose his opportunity by eventually in mind to  bypass Stefanov if there is  right moment for it, as Stefanov does not have anything of this magnitude on hands.
Stefanov was trying to get the grab on Akula device and understand the secret to eventually bypass Akula as not needed any longer in the game.The determination of Stefanov comes from the fact that he has a pressure from his  German Investor who put money in him and do not want to lose.Stefanov got this contact from international  show in Hamburg in 2012 if I remember correctly.
Stefanov look for me like completely  disoriented or not up to the task of any valuable hints of how to make it  by himself.Demands of Akula must of be pretty high and Stefanov ability to  cover the needs   must have been  pretty  dangerous as investor would be no longer interested  financing  Stefanov  if he has not grab on the secret.Now  it is not important if the output is 1W, 10W 100W 1500W or anything more than that.
It is only more convincing if you see real load with no external energy delivered,The opportunity is there and that  what is the most important for us.












Wesley











00

  • Full Member
  • ***
  • Posts: 119
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4465 on: June 24, 2014, 08:18:38 PM »

I need my friend you to say more and put drawings here or make video explaining that.
I sort of get picture but not quite yet.


http://www.eecs.tufts.edu/~dsculley/tutorial/diodes/diodes3.html

this is  i see you may or may not agree but ask dally he will tell you



00


======================================================================================









http://www.eecs.tufts.edu/~dsculley/tutorial/diodes/diodes4.html
============================================================================================

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4466 on: June 24, 2014, 08:23:13 PM »
I will come up with proper evaluation when all of the answers are completed.




Wesley

Utopia Now

  • Full Member
  • ***
  • Posts: 100
Modulation - Demodulation HF to LF 50 Hz
« Reply #4467 on: June 24, 2014, 08:25:27 PM »
I put some extra info in this Prezi doc about De-Modulation . 
I just gathered your info together a bit :)  I see we are all putting info here about Modulation at about the same time .. I call that a Wonderful Synchronicity and very Nice CoCreation :)

  http://prezi.com/fiwgtl78it85/donz-device/


Depending on how fast your PC is  the Prezi doc opens fast or takes maybe a minute or so because there is a lot of info in it.

If you use this link you can also download the Prezi doc. for free
http://prezi.com/recommend/vwzwag678bmv/

In the Prezi docs you can Zoom and drag and click on links that go to websites.

Thank you all
Utopia Now

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4468 on: June 24, 2014, 08:45:10 PM »


http://www.fcet.staffs.ac.uk/alg1/2004_5/Semester_1/Communications,%20COMMS%20(CE00038-2)/W5_AM_Demodulation&FM.pdf

I wanted to prepare all elaboration about SSB Single Side Band modulation and I gave up/
It looks like Switching power supplies takes DC convert it to  square DC pulse with AC component of rise and falling time than change the voltage to 12 V

 I JUST DO NOT UNDERSTAND WHAT DO WE NEED RECTIFICATION FOR IN DALY?


Wesley
« Last Edit: June 24, 2014, 11:10:16 PM by stivep »

guruji

  • Sr. Member
  • ****
  • Posts: 470
    • http://andyborg.tripod.com
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4469 on: June 24, 2014, 09:13:33 PM »
Hi I tried lot of times with chubinidze coil and now experimenting with Don Coil too with thicker gauge secondary but still no success.