Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719136 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4395 on: June 21, 2014, 05:37:38 PM »
   Although there may not be any certainty of Akula's circuit diagrams,  there may be enough information presented already, for those few of us that don't need to be spoon fed.

   Following what we can see from the video(s) of the second Akula device,  which was also confirmed to be a true working device by Wesley's friend Tiger, may be the best bet, so far. Or, if you have a better idea... please post it.
   There are no EXACT and true replication of any of Akula's higher power devices up to now, at least that I'm aware of. Or confirmed schematics.
  The 1500 watt device may be the best example of a current still working self runner to date. It may still need further improvement for it to run non stop, stable, and without overheating, etz...  Those issues were not mentioned or confirmed by witnesses.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4396 on: June 21, 2014, 06:26:58 PM »
Schematic says 200... but hard to know... I have coils with 1000 (28 gauge) that work well... before applying the filter the new one that was only 200+(24 gauge) and
But; the induktor loops back on the right side so it looks backwards to the kacher secondary... some of these things are really hard to see... where you should be able to see it in the highres pictures it ends up being blocked by other things


could wish for a shot through the tube


Edit: I see you labeld parts 'inducter' and 'antenna' ... I see nothing on the schematic that is 'antenna' what you labeld as inducter is actually the driver of the kacher.


Edit2: ran the kacher without filter, with indukotr attached, noted the frequency... made another filter with fewer windings... started at half, ended up at 1/3 the windings so the frequency then matched the kacher... now works.  it's about a x200 coil  (4v input, 800V p-p, 14V input, 2800V p-p output... ) The filter does help current draw. 


Question though; is there a convention for CW and CCW notation?  Is that looking at how the wire is coming off of the coil? or going into a coil? 
Is the kacher HV coil the same as the first layer? or the outer layers?
I not speacialist in this questions, you must ask this questions to Akula.
But I can try answer.
If I good understand, then my answer is in picture.
Akula in one conference say, that without synchronisation not work. If you use kacher, here is no synchronisation, so acording Akula, that must not work. You can try made like in schematic, but here is probarly wery small chance, that you get overunity. So I not wery see reason wasting time anwering you questions about divice, who I belive that for you not works.


"[size=78%]is there a convention for CW and CCW notation?"[/size]
This question I not understand, if try answer questions.
"[size=78%]Is the kacher HV coil the same as the first layer? or the outer layers?"[/size]
[size=78%]This also. Kacher, I think probarly have 500-1000 turns, and then 3 turns of tick wire at end to fix it, if you about that giving question.[/size]
 ;)

tarakan

  • Newbie
  • *
  • Posts: 47
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4397 on: June 21, 2014, 06:43:48 PM »
Someone is fooling you. This coil is rather complex. A lot of windings.
The inventor of this coil must have been a messenger of god. He is Jesus or Muhammad or a similar kind of charachter.
How else could he come up with such a complex device at home, in his living room?
And like an orderly Prophet, he gives you part of the theory, but never explains everything about this world.

So the only approach would be to find this theory of operation ourselves, collectively, through measurements and calculations
and not to try to decypher fake BS.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4398 on: June 21, 2014, 06:53:28 PM »
   Although there may not be any certainty of Akula's circuit diagrams,  there may be enough information presented already, for those few of us that don't need to be spoon fed.

   Following what we can see from the video(s) of the second Akula device,  which was also confirmed to be a true working device by Wesley's friend Tiger, may be the best bet, so far. Or, if you have a better idea... please post it.
   There are no EXACT and true replication of any of Akula's higher power devices up to now, at least that I'm aware of. Or confirmed schematics.
  The 1500 watt device may be the best example of a current still working self runner to date. It may still need further improvement for it to run non stop, stable, and without overheating, etz...  Those issues were not mentioned or confirmed by witnesses.

Thanks Nick
I personally don't see any reason if there is even one Akula circuit that woks as OU, the others to be fake. I mean, if you discover a working principal and you know how to make an OU generator, why to make 9 more fakery ones?

I have a question to any of you who have  experience on phase shifting measurements between voltage and current in power lines. If current is already behind voltage to some degrees and then we feed an inductor, then this current would slow down more isn't it like that? When I measure in my oscilloscope the output signal I measure voltage right? First, how can i be so sure that also current is loaded with this high freq. Component on the right moment? And of course second, how my output coil can be loaded with current in a specific short time duration if this is behind voltage in a more degree than the appropriate? Then I guess that voltage would be applied at the ends of the coil and before current would start to increase, then voltage would reverse polarity, and every time before current would do the job, voltage would change polarity. Does this idea belong to reality? 

x_name41

  • Sr. Member
  • ****
  • Posts: 254
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4399 on: June 21, 2014, 07:47:26 PM »
this Akula device is a power of the 1150W !, incidentally look at and this topic: http://www.overunity.com/7833/thane-heins-bi-toroid-transformer/#.U6XifrGnfsA

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4400 on: June 21, 2014, 07:59:09 PM »
I not speacialist in this questions, you must ask this questions to Akula.
But I can try answer.
If I good understand, then my answer is in picture.
Akula in one conference say, that without synchronisation not work. If you use kacher, here is no synchronisation, so acording Akula, that must not work. You can try made like in schematic, but here is probarly wery small chance, that you get overunity. So I not wery see reason wasting time anwering you questions about divice, who I belive that for you not works.


"[size=78%]is there a convention for CW and CCW notation?"[/size]
This question I not understand, if try answer questions.
"[size=78%]Is the kacher HV coil the same as the first layer? or the outer layers?"[/size]
[size=78%]This also. Kacher, I think probarly have 500-1000 turns, and then 3 turns of tick wire at end to fix it, if you about that giving question.[/size]
 ;)


I have no contact to(for) akula ....
I'll add a picture for the CW/CCW question; probably doesn't matter; because it's AC.


"nd then 3 turns of tick wire:" okay that's the ??? marked in the picture... that's what I thought too.


Regarding synchronization; perhaps in this scheme there is a sync.  The Kacher runs at a fixed frequency and is itself opposing, with a small delay though the middle variable inductor...


added circles and arrows for the various parts... while yes it is one conductive path, it is indicated in 3 parts on the schematic....

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4401 on: June 21, 2014, 08:19:34 PM »
  Tectron:  Thanks for ordering the Zeners for me.

   All:  If any of you are willing to work together towards back engineering the second Akula device, you can count me in on it.
   What is probably in the boxes that he doesn't want to show us are the circuits that control the duty cycle, and frequency controls for both the Exciter HV as well as the yoke circuits. Maybe someone can ask Akula if he is willing to show the inside of those boxes, and explain what is involved there. And if the circuits schematics that have been presented for that device are correct, or useful for our replications.
   I know that Akulas original intention was not to disclose the working principals of his first two circuits, but that seams to be changing as time goes on.

  As Akula's second device works as has been shown (and verified), it may be worth our while to see if we can also obtain similar results of some kind, even if not exactly like what he is showing. As even being able to light a single 100 watt bulb (without an external input source) is more than has ever been done by any of us here, previously.

  MenofFather: your comments are very important, as well as helping with the translations.  My thanks to you.

   

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4402 on: June 21, 2014, 08:28:01 PM »
So then my question about direction was... is the kacher high voltage coil the same as the long first layer (indicated as CCW) or the same as the over layers (indicated as CW)?

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4403 on: June 21, 2014, 08:43:26 PM »
  Tectron:  Thanks for ordering the Zeners for me.

   All:  If any of you are willing to work together towards back engineering the second Akula device, you can count me in on it.
   What is probably in the boxes that he doesn't want to show us are the circuits that control the duty cycle, and frequency controls for both the Exciter HV as well as the yoke circuits. Maybe someone can ask Akula if he is willing to show the inside of those boxes, and explain what is involved there. And if the circuits schematics that have been presented for that device are correct, or useful for our replications.
   I know that Akulas original intention was not to disclose the working principals of his first two circuits, but that seams to be changing as time goes on.

  As Akula's second device works as has been shown (and verified), it may be worth our while to see if we can also obtain similar results of some kind, even if not exactly like what he is showing. As even being able to light a single 100 watt bulb (without an external input source) is more than has ever been done by any of us here, previously.

  MenofFather: your comments are very important, as well as helping with the translations.  My thanks to you.

 
I think that in the blank box is just the filter/capcitors/diodes and interconnections.  The other box(with toroid on top) is the TL494 driver.
It may contain a second TL494 with a small step-up transformer...


I started thinking about the opposing, layered currents and was reminded of a Birkland Current lecture.... Dr. Donald Scott: A New Model of Magnetic Structure in Space | EU20
Espcially at 9:26   or 19:58 or 31:40 He's kind of a slow talker... so there's only a little information in the 35:00 video... But he indicates there are multiple shell currents of free space electron flows...

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4404 on: June 21, 2014, 08:50:39 PM »
I not speacialist in this questions, you must ask this questions to Akula.

This also. Kacher, I think probarly have 500-1000 turns, and then 3 turns of tick wire at end to fix it, if you about that giving question.
 ;)
I appreciate the feedback... it may not matter the orientation of that coil vs the others since it's an AC pulse and both sides will be equally represented... (And even for an english speaker I don't phrase things right so thanks for bearing with my poor asking :) )


The gauge of brown varnished wire seen coming off in the picture is rather low... 20-24 probably... and in that amount of length (about 15cm) there's no way you could have 500-1000 turns... 200 is a more appropriate count with 24 gauge wire (mine spans about 15cm). 

x_name41

  • Sr. Member
  • ****
  • Posts: 254
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4405 on: June 21, 2014, 10:03:35 PM »
looks like this sausage, and Akula control circuit for 1150W device  :)

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4406 on: June 21, 2014, 10:31:29 PM »

I have no contact to(for) akula ....
I'll add a picture for the CW/CCW question; probably doesn't matter; because it's AC.


"nd then 3 turns of tick wire:" okay that's the ??? marked in the picture... that's what I thought too.


Regarding synchronization; perhaps in this scheme there is a sync.  The Kacher runs at a fixed frequency and is itself opposing, with a small delay though the middle variable inductor...


added circles and arrows for the various parts... while yes it is one conductive path, it is indicated in 3 parts on the schematic....
I dont know how exatly wound pickup coil. You can try wound like show in schematic, only addd more turns.
Here how can be: first and two layer wound in clockwise let say. 56 turns each, 3 and 4 wound in anticlock direction with turns 28 each, 5 and 6layers wound also in anti clock wise direction. Wery simple.
You in picture baisicly all corect draw. :)

x_name41

  • Sr. Member
  • ****
  • Posts: 254
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4407 on: June 21, 2014, 10:31:43 PM »
and this is my experimental device, and my control circuit :)

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4408 on: June 21, 2014, 10:41:48 PM »
looks like this sausage, and Akula control circuit for 1150W device  :)
Okay, then the kacher is CW if the first layer is the same as in the video and that is 'CCW' on akula schematic; I'll run with that

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #4409 on: June 21, 2014, 10:46:26 PM »
Here show, how coiil maybe must be wounded. Wound direction is acording schematic. :)