Hi Khwartz,

There are many vagaries with batteries that can and do mislead experimenters into thinking that their systems are running OU. The most misleading is when a battery appears to charge whilst on-load. Caps offer a more reliable and measurable energy storage medium.

Nice to see you agree

What about to have large enough packs of caps, like the "boostpack" of lasersaber in YouTube :

https://www.youtube.com/watch?v=GPJao1xLe7w&feature=youtube_gdata_player

Or this other one could be:

https://www.youtube.com/watch?v=z3x_kYq3mHM&feature=youtube_gdata_player

Need to be then calculated to feed the circuit and not have too much drop in voltage but of course if closeloop we don't have to care of course; right?

Could be then only big for the additional storage bank for the excess energy pumped and then delivered by the system. (Proctection and storage system proposed few posts before.)

Any way, we often see devices only started with a kick from a little 9V battery (if it could be true!).

Nice to see you agree

What about to have large enough packs of caps, like the "boostpack" of lasersaber in YouTube :

https://www.youtube.com/watch?v=GPJao1xLe7w&feature=youtube_gdata_player

Or this other one could be:

https://www.youtube.com/watch?v=z3x_kYq3mHM&feature=youtube_gdata_player

Need to be then calculated to feed the circuit and not have too much drop in voltage but of course if closeloop we don't have to care of course; right?

Could be then only big for the additional storage bank for the excess energy pumped and then delivered by the system. (Proctection and storage system proposed few posts before.)

Any way, we often see devices only started with a kick from a little 9V battery (if it could be true!).

Lasersaber's high capacity 'boostpack' or any other type of 'super' capacity pack used for energy storage and working within a device using inductive or electrostatic methods as MO is highly unlikely to help close-loop that device IMO. Close-looping (self-running) is not a concept I consider to be achievable in reality. However, I believe that much improved system efficiencies from energy transmutation is the way forward and any developments in this field will hopefully help to change the world for the better. We are already seeing considerable advances in the efficiency of converting solar energy to electricity.

Hi Guyz

Hi Geofusion,  I peticulary worried about the honesty of your work while you leaved without sharing the most important experiments of you: self running and overunity demo WITH correct estimation of in and most most important: output.

Can't wait that you share this, so that caution and dubtful man like me could truly estimate the relevence of investing time and money in the replication, that you can be sure I will do too if you indeed go up to the necessary ways to truly demonstrate o.u. or seflloop.

You have all my wishes to succeed both in fully demonstrating your Mazzily-Royer ctr kind in o.u. and permanent selfrun, and for the motor-generator too. As I have written: I do prefer to be wrong in my worryness of these last weeks about you but that we acheive the purpose of our Quest, cause billions of people on this planet do need it!

Cheers,
Khwartz

Khwartz :
 Yes I understand you statement. Yet I know many of you are willing to see these devices work as how it should but as I am very Carefull not to at times, because there are many eyes watching and want to track down certain ppl.
There was a month ago or weeks ago alot of talk of they don't believe in OU. So I hold back, sins alot of ppl do not experiment on their own to see if there is something, I would really like too see everyone els trying things and share too. not to be rude.
It's for our own protection but I have givin hints but in a bit i will begin to post more. and Help collaborate upon the devices and the necessary sharing of the info.
The loop exists, but the circuit has to be Tuned to make it run longer or almost infinite time. It's waste of money blowing up fets and parts again, but has to be done sins there is no one to really tell me preciesly what to do, it's also the Challenge . I might have help from somewhere els, but it's also to my part to see if I succeed on my own.

motor generator I will share some pics at first, I am busy to update it with some more on it now .

Dear GeoFusion.

Good to see you back with us!! 

Yes I do think that dear Zeitmaschine is on to something with regards the Coax cable !!    In fact this is the thread that sort of started it !!  And that simple spark gap experiment of mine kind of lends credence to an energy amplification effect !!

I am looking forward to seeing your Motor generator setup as I too have decided to put my rather better mechanical skills to this task !! But my oh my, ridiculous prices for stuff here in the UK !!

6.5 Kva Alternator @ £325.00
Pulleys and bearings @£150.00
I got the drive motor rather cheap @£10.00 but I still have to sort out the Flywheel. I have a 40Kg 0.5 m Dia flywheel casting in the back shed but my Lathe is not big enough to machine it !!

Ah well these things will be overcome somehow !!

Cheers Grum.

Grum:
Yes, the coax cable might have potential , will also try it out soon with Spark Gap tech, but I will just show a vid where I discovered something with it. But withou Coax though, sins that with coax is new info to me recently hehe.

Yes soon I will begin to post some pictures of the motor/generator , 2.5 kw one.
nice 6.5 Kw Gen bit Pricy if it was here at the island but yeah hehe.
You will manage if you put time into it for sure.


I want all of you too see these vids too.
this is all real
check this one out : also tried to hook it up this way, easiest setup ever : http://www.youtube.com/watch?v=Fv53K9MnDuM


THIS one is What I have postes earlier some time too how someone did it, Extremely easy, btw guyz don't use Brush Generators they wont work. Only Brushless with Magnets, that is where OU can be achieved. : http://www.youtube.com/watch?v=LTLLnUOPOQk



T-1000,
hi , yes familiar with those vids you shared on the post thnk you for showing them again.
Yes within tesla's Diagram you see the Lenz force cancellation within it, It's all about the winding directions .
check the links I provided within Grum's part.



Oh yes, about Caps for the part of the looping system, is what i had In mind the smoothen out my Circuit.
Caps for looping idea is one I had in mind

Cheerz~
   

Geofusion:  re looping.
It appears that Kapanadze found he could loop using a three plate capacitor.


The two vids you posted are well known to most of us.
We are still analyzing the Romanian vid and the De Witts is a mystery to us all.

?

http://www.youtube.com/user/Sergkik/videos

hi everyone,

I have just moved away from experimenting with Yoke core as shown in my previous video  GeoFusion roundcore replication attempt v5.0 http://www.youtube.com/watch?v=nRFE-2BWYl

I just started with experimenting with 3 inch iron powder toroid for the 1st stage of Geofusion or Akula device.
Toroid photo attached.These toroids were purchased real cheaply <$3 or <$2 off ebay from a seller located in China whom offers free shipment.Bought 8 of those around 2012 or early 2013.

I got interesting result without 1KW halogen load at 57volts output ,37 turns 1.5mm sq wire for secondary,8 turns 2.5mm sq wire for each winding.
No load current consumption at 13volts is mere 83mA at 1watt using my existing Mazilli circuit as used in my previous Geofusion roundcore replication attempt v5.0 video.
Unfortunately light output from 1KW Halogen tube at this moment is the same as my version 2.0 attempt.
The solution for me "once i'm free" is to increase the primary winding from 8-0-8 to 13-0-13 like i did in the recent yoke replication.

People whom are familiar with electronics would know each stage of the circuit would need to be "perfected" where possible before moving on to the next stage.
But some ppl just simply suggesting jumping at loop back or ou when we just manage to figured out the 1st stage of Akula or Geofusion using Yoke core for now.

So Very Nice dear magpwr to be so precise in your descriptions,  it helps much to understand what is going on and how you progress

Cheers.

"Hope" you are mistaking, dear "Hoppy", who looks having lost "hope" in the quest for EM-EM o.u.

Cheers.

I've certainly not lost hope Khwartz. If I had, I would not be bothering to spend time on this forum. I do really hope that I'm mistaken but I fear that I'm not. Time will tell. To lose hope is to lose the will to live!

Hi Guyz



Khwartz :
 Yes I understand you statement. Yet I know many of you are willing to see these devices work as how it should but as I am very Carefull not to at times, because there are many eyes watching and want to track down certain ppl.

I think you are mistaking: sharing as large as possible the working system could be indeed the best way to proctect you, cause if already spread so there is no more interest to harm the person having shared while it is already done it will change nothing but even increase the interest for is there is a martyr.

If you are afraid to spread publickly, why not in PM?

There was a month ago or weeks ago alot of talk of they don't believe in OU.

I do not want to believe in anything, I can just postulate the possibility and wish it will be worth have done so. And "faith in o.u." is absolutly not needed with good demo. Just need enough faith in the experimenter, while it is hard to really get it when the experimenter looks to turn around the problem but not going to the main. :/


 

So I hold back, sins alot of ppl do not experiment on their own to see if there is something, I would really like too see everyone els trying things and share too. not to be rude.

If I had spent my time and my money since several years to try to replicate all the claims here in overunity.com and other sites, for o.u., which have indeed gone NOWHERE 100% OF TIME, I would have lost 100% of my time and my money; that I can not do regards to my family obligations. But you probably never read about my own REAL actions to help people in the world in a poor contry to have free (solar) energy: When you will have put ALL your money, ALL your time, and even risk your own life and the well being of your own family, to help poor people to be selfindependent, well, you will be able to ask me for things I won't do unless have a true simple demo of you; cause if we presently meat in disagreement, I want to BELIEVE that if you put a vid online, it won't be a fake, so then my pleasure to replicate.

It's for our own protection but I have givin hints but in a bit i will begin to post more. and Help collaborate upon the devices and the necessary sharing of the info.

More you will share of true functionning devices, more you garanty that nothing will be done to be enough to stop free energy.
I am in contact with an association in France to support any tries in the free energy quest, so be sure if you can really provide something self running of o.u. with the appropriate measurements, be sure it will be broadly spread, and sure I won't be the only one to do it here on this community.

The loop exists, but the circuit has to be Tuned to make it run longer or almost infinite time.

Wish that much! Dear Geo; wishing that much!

It's waste of money blowing up fets and parts again, but has to be done sins there is no one to really tell me preciesly what to do, it's also the Challenge . I might have help from somewhere els, but it's also to my part to see if I succeed on my own.

I do understand,  and thanks to share your difficulties. Just hope indeed you will make it.

motor generator I will share some pics at first, I am busy to update it with some more on it now .

Would be very nice cause as you know, I am mostly interested to replicate this one, but with more elements/specifications/understanding, so that I don't waste the money I need to feed my family but to go straight forward the right way to do; hope you understand yourself the situation.

Oh yes, about Caps for the part of the looping system, is what i had In mind the smoothen out my Circuit.
Caps for looping idea is one I had in mind

Cheerz~
   

Nice to read you again.