Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11717923 times)

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1830 on: June 06, 2013, 09:32:18 AM »
  The transistors getting hot, or not, is a strange thing sometimes. Because I've had the transistor working fine, and stone cold, lighting bulbs, then at other times, so hot you could not touch them. I still have not figured this out. But, I have seen that they can be working well, and still not over heat, at times.
  When the yoke or ferrite yoke cores make a lot of transformer noise, that is when the transistors are drawing a lot of current, and also getting hotter. Each transistor or mosfet works different, so it's good to test different ones, even of the same kind. Right now the transistor that I'm using will not light a 50 watt incandescent bulb, through my Ringer circuit, like the TIP 3055 transistor can, but it will light a 40 watt bulb, ok. I've burnt out many many transistors...
Finding the right transistor is very important. Sometimes only trial and error will work to find the best one that is most compatible, same thing with finding the right capacitors for finding the resonance.
It takes a lot of patience, and most people will never take the needed time.
With bipolar trasistor is two parameters, sencuvity to base curent and max frenquency. If sensivity to base is small (light of bulb small), then need lees om resistor. If frenquency is so small also can not good work, for kacher expeshaly. And also power, some transistors is powerfull, some not powerful.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1831 on: June 06, 2013, 09:42:42 AM »
  Ok, first of all, I don't have 220 volt from the grid, or any other source. Only 110 volts. 
   My question remains, will the two transistors or mosfet handle 220v (or even 110V) direct current, or not?  I don't want to burn them.
  Look at how the center tap is connected to the Driver Board, and NOT to the rectifier. This was a picture from a previous Akula video, but still shows the connection that I'm concerned about. If I connect the input direct I think that I would instantly burn out the transistors.  The driver board has a voltage drop down capacitor (brown cap on second picture) that reduces the input that is coming from the rectifier to the driver board.
If you paste small duty cycle to transistors, to mosfets let say, then you not burn mosfets. Dally say that it make ajustment for his divice changing on TL generator frenquency and duty cycle.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1832 on: June 06, 2013, 09:45:51 AM »
Only if you give logic "1" all the time to transistors. They are opened switches by default and with high frequency they can handle lots of amps. You might investigate how most induction cookers are built, there are even 220V capacitor discharges over coil and transistor in half bridge...
I think probarly red coil on yoke not used. May it try use it but look that without it good work.

Shokac

  • Sr. Member
  • ****
  • Posts: 378
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1833 on: June 06, 2013, 10:15:16 AM »
Look at the grey wire also from the rectifier to the battery area.

This wire going to ground.

Shokac

  • Sr. Member
  • ****
  • Posts: 378
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1834 on: June 06, 2013, 10:30:28 AM »
Maybe, this is right wire direction.




MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1836 on: June 06, 2013, 11:26:42 AM »
From drosel going wire, so it to something conected. Maybe to aliuminium plate like in hendershot or maybe to simple capasitor about 0.01-0.1 mikrofarads.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1837 on: June 06, 2013, 12:03:24 PM »
Could someone use multimeter who measure inductance and measure inductance of primary coil 220 volts to 3-50 volts transformer. I want try Stepanov schematic, but for this need know inductance of 2 drosel, to calculate that need capasitor 1 for resonance with 50 herc. I not have multimeter who measure inductance. Me neead about know inductance, чтоб знать, может там сто микрофарад надо или тысяч, то не реально мне столько взять, а может 0,1 микрофарад, а я буду копаться в 4-30 микрофарадах.
http://www.speedyshare.com/3t8Bu/stepanov.gif

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1838 on: June 06, 2013, 02:19:43 PM »
Here is an aluminum sheet, see http://...
So maybe it is important and it is in Akula device
In Gabriel device there is also a sheet http://... 
In my opinion, if these devices actually work, then the sheet/pipe is the "gain medium" where the energy originates.
It is a physical process aided by electronics. 
The process is not based on electronics alone, thus electronic schematic diagrams cannot illustrate it fully.

Grumage

  • Hero Member
  • *****
  • Posts: 1113
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1839 on: June 06, 2013, 06:34:40 PM »
In my opinion, if these devices actually work, then the sheet/pipe is the "gain medium" where the energy originates.
It is a physical process aided by electronics. 
The process is not based on electronics alone, thus electronic schematic diagrams cannot illustrate it fully.

Dear Verpies.

Can I take it from your statement above, you mean a form of NMR?

Cheers Grum.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1840 on: June 06, 2013, 06:48:10 PM »
  It may be possibly that in Akula's choke there is also a white paper separator between the aluminum sheet, and the choke.  As in one video, one could see the metal sheet going down the tube and covering most of the inside diameter, if I'm not mistaken,  I'll look for that.
   He may also be covering the sheet in his latest video, and it may be there also, but not visible. As in the Hendershot's diagrams there is NO external input source.

  There has to be more than normal electronic circuitry going on here, or it wouldn't work like it is. 
What is this effect???   He mentions,  "I tell you a secret".... the Earth magnetic resonance...
 TK also mentions, the source is the same thing as what Tesla was talking about, ambient energy. 
« Last Edit: June 06, 2013, 08:59:48 PM by NickZ »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1841 on: June 06, 2013, 07:21:26 PM »
   T-1000:
   In your last picture you can clearly see that the center tap of the yoke if going to the drive circuit, and not to the rectifier. From that rectifier one dark wire is going to the driver board, and another dark wire is going from the battery area behind the air coil and also to the driver. So, they are maybe the positive and negative input source to that driver. But, the center tap is not directly connected to the rectifier. The red yoke wire is connected to the rectifier, even if the other end is not connected to the yellow wire, but I think that it does look like it is connected to the yellow wire. Look at my last picture.
 The big air coil is not connected to the rectifier. It goes from earth ground at the bottom, and at the top of the air coil to the bulbs, like he says, and isolated from direct contact to anything else. That part works like that, at least it does on my device, as the bulb lights connected to the air core top wire,  with no direct contact to anything else, but to close the circuit back to ground it works better.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1842 on: June 06, 2013, 08:10:18 PM »
   T-1000:
   In your last picture you can clearly see that the center tap of the yoke if going to the drive circuit, and not to the rectifier. From that rectifier one dark wire is going to the driver board, and another dark wire is going from the battery area behind the air coil and also to the driver.

One to driver board from rectifier and another to the ground. The driver part where this wire comes to has capacitor and choke probably for smoothing and filtering purposes. Obviously the microchips are not fed by 220V so the logical question - what it is for? And when looking back akula's on induction cooker experiments the answer is obvious. :)

I think that's enough of detective work from me, back on basic principles on where second source of energy is coming from to that circuit. The NMR/free electrons sucking from external source or any other second energy source should be narrowed down. My bet is on NMR there ;)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1843 on: June 06, 2013, 08:39:11 PM »
  The driver board can be getting 220v Dc from the rectifier, then is dropping that voltage by the brown ac cap on the board to a needed voltage.
 I know where the energy is coming from, but I don't know how to obtain it from the ambient yet. Therefore much more detective work is needed for me to replicate. I am working on this 24/7, even when I'm at the beach, and even in my sleep.
  This is what I see, of course it is probably also not right. But I'm trying...

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1844 on: June 06, 2013, 10:53:13 PM »
Very good NickZ  ;D  What did you took so long to realize this simple scientific fact ? "Columbus egg factor"  ;D ;D ;D