Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719907 times)

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1785 on: June 03, 2013, 01:06:05 AM »
So C2L3 freq needs to be at 6mHz
and L1C1 freq also needs to be at 6mHz???


DonL
It should be same frequency. Also 6MHz seems a high target because it is radio frequency and there will be trouble to contain EM field in coils and rectify after. Can you bring frequencies down to with longer wire length of L2? The best case would be if L3C2/C1L1 would work on frequency range 25-100kHz.

We see some increase in light intensity when shortend, but also the input on the variac increases from 22W till 30W.

Video here: http://www.youtube.com/watch?v=CpWrPrwPcWo&feature=youtu.be

Regards Itsu
Thanks Itsu,

This is where dance begins between voltage and current. If you would make resonance in series on output the current draw will be on maximum on primary but shorting secondary on waves peaks would do something else and needs actual test. Also I have idea how to reduce current draw on resonance in series so with resonance on paralel it makes opposite than resonance in series does - minimizes input current and maximizes voltage. Theoreticaly the balancing between those would bring to normal usage without load and high current on output coil. After this step using high current as input to scalar transformer would give power out without affecting resonances(You probably seen one already in D Smith investors weekend 2001 video with output coil on top of core where 2 input coils are inside connected in series).  This is where 2 resonant circuits come into single transformer concept I am just writing about to DonL.. The trial and error way, heh :)

dllabarre

  • Hero Member
  • *****
  • Posts: 750
    • Portal Page
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1786 on: June 03, 2013, 01:18:50 AM »
It should be same frequency. Also 6MHz seems a high target because it is radio frequency and there will be trouble to contain EM field in coils and rectify after. Can you bring frequencies down to with longer wire length of L2? The best case would be if L3C2/C1L1 would work on frequency range 25-100kHz.
L2 should be just 1 layer of wire correct? 
So a longer form for longer wire or a larger diameter form for longer wire would work OK?


T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1787 on: June 03, 2013, 01:22:00 AM »
L2 should be just 1 layer of wire correct? 
So a longer form for longer wire or a larger diameter form for longer wire would work OK?
If you did build Tesla coils previously you probably know the answer already. It is single layer fine long wire same as in Tesla coil.

dllabarre

  • Hero Member
  • *****
  • Posts: 750
    • Portal Page
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1788 on: June 03, 2013, 01:25:46 AM »
It is single layer fine long wire same as in Tesla coil.
I understand.  I just wanted confirmation.
Thanks

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1789 on: June 03, 2013, 05:30:02 AM »
  I've been trying to study up a bit on Tiger's circuits, to see if I can understand where Akula is coming from, and how he may have developed his circuits from Tiger's ideas. I would suggest that those interested view Tiger's  videos, as some are new and may not have been seen by anyone, as yet.
  Tiger's youtube channel:
  http://www.youtube.com/user/tiger2007ify/videos

  Here, (diagram below) is a picture of Tigers dual transistor circuit, that is where I think the rest of the Akula circuit may have developed from originally. Or maybe not. But, I see much more similarities with Tiger's circuits, than anything that Romonov has shown, that Akula may have used to build his self runners with. As Romanov has not shown any self runners, only circuits that light a single bulb using over 3 amps from his power supply, and nothing else.
  Neither Tiger, Akula, or TK have mentioned anything about voltage and current banging into each other, or coil shorting, etz... at least not that I have been able to observe.  Akula mentions to forget about resonance and such, and to focus on raising the current output to the coils. The system seams to run and operate on higher current, and not higher voltages. I'm still just learning about all this, so...
   I really do suggest viewing ALL of Tiger's videos, if possible. The later ones are of much better quality.
The last video that he made was about one month ago, is showing a very interesting circuit, lighting much more than an led bulb, which I am guessing may be his last and possibly most developed device. 
I wish that I could understand the language, but I can't, so I'm counting on some help, there.
 
« Last Edit: June 03, 2013, 07:53:38 AM by NickZ »

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1790 on: June 03, 2013, 08:02:10 AM »
I think at the end it does not matter if there is higher current or higher voltage. Both should be possible, just having own limitations. For example for higher voltage it's hard to switch current precisely, but you don't need a solid core.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1791 on: June 03, 2013, 08:34:21 AM »
  I realize that the diagram from Tiger is not exactly the same as the device, as the diagram is showing two transistors, and not just one. But where is the mistake?  Does Tiger say that it is running on radio waves, and how much voltage/current is "little power"?
    IF,  it is a self runner (as you can hear it when it kicks on) that is a very important point, even if the output is small.
   You are saying, "Windings must be parallel to it capacitor"?  How should the windings be parallel to the capacitor?

  If feel that these are all important steps taken by Tiger, that have possibly led to where Akula has further taken that technology. And the working ideas were simpler at that point, and easier to understand.

  Here in the TK green box video (below) the ideas were also simple, and the two transistors, were also getting hot, back then, also.
   I see several similarities with what Tiger was doing in his versions of the TK devices.

  Here is a partially translated version of the TK green box back-yard video.  I'm still learning some new things from it.
            http://www.youtube.com/watch?v=OIWi1mELJvY

  TK is saying that it may be possible for even more than 5kw to be drawn from that device.
Wow, that would be awesome, if possible.   That's all I need...
  The charging or feed-back path was done with a large iron-core transformer, going from a coil on the air core transformer to a full bridge rectifier and back to the 12v battery, to recharge it.
  TK says that the input source is not coming from stray electricity, or radio waves, etz... he argues that point, but that it's the same available AMBIENT source as what Tesla talked about.

http://realstrannik.ru/forum/19-svobodnaya-energiya/15018-opyty-tiger2007.html?limitstart=0#14723
" Does Tiger say that it is running on radio waves, and how much voltage/current is "little power"?" 
Tiger asuming, that it can run from waves of other divices. What current I dont know. But it try light led and with not succesfully, how I understand.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1792 on: June 03, 2013, 08:36:28 AM »
Кстати , когда менял конденсаторы на более качественные , такой же емкости , система затухала . <...> Питание было 12 в , после запуска проседало до 5 в ,затем поднималось до 7 - 8 в и на этом стабилизировалось . В течении суток это напряжение плавало , что косвенно указывает на улавливание энергии полей (наводок )всяческих бытовых приборов . Жалко , что концентрация этих энергий мала .... - Tiger
http://realstrannik.ru/forum/48-temy-freeenergylt-antanasa/129332-ustanovka-akuly-povtorenie.html?start=126#133996

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1793 on: June 03, 2013, 06:17:11 PM »
Red wire on yoke may going to drosel like in this video. http://www.youtube.com/watch?feature=player_embedded&v=5w9nJahkFB0 In this video going to primary winding of air core transformer, but in final free energy divice secondary winding of air transformer to nothing conected.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1794 on: June 03, 2013, 08:36:24 PM »
  @ MenofFather:
     Thank you for the link to the Russian Forum, there are two very interesting videos to be seen there from Phoenix:
http://realstrannik.ru/forum/48-temy-freeenergylt-antanasa/129332-ustanovka-akuly-povtorenie.html?start=126#133996

  I'm glad to see that I'm not the only nut case blindly following this replication, in the whole world.
 
  Here is yet another video by Akula:
http://www.youtube.com/watch?v=gTDB3NVxOP0&NR=1&feature=endscreen

  It is very important to see all the steps that were taken to arrive at the final Akula self-runner.
As I mentioned before, that Akula did not use a battery/inverter/rectifier, or the feed back path,  in his first tests. That is what we need to do, also.  In order to see how the induction heater approach can be implemented into these amazing circuits.
  I am still stuck at the 1st base, which is, not being able to get any useable output from the 3 turn coil.
But, I'm still trying hard to be able get all this.

   Menof:  Thanks again for all your help and attention.
                                                                                     Nick_Z

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1795 on: June 03, 2013, 10:26:01 PM »
Using a 220V-12V transformer driven by a variac from mains, i was powering a 12V/21W bulb via the MOSFET shortener
I used the single diode in the drain, so not the FWBR.
That's a good experiment. I don't have much to add to it.  Maybe T-1000 could help you further.

P.S.
A related experiment with a spiked saturated transformer core might be interesting at this point.
The saturation can be accomplished with more primary AC current or an additional winding with DC in it (more convenient).

 "spiking" can be done with your shorting scheme or with your nanopulser.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1796 on: June 04, 2013, 08:27:03 AM »
Nick ask from vere going center wire on yoke. It can be going from plus 220 volts 100 herc. http://realstrannik.ru/media/kunena/attachments/289/img004_2-2.jpg Like in this schematic.
Capasito 5 uF 600 volts is not nessary must be. Akula in one video say, that he finding capasitor and using that on who voltage is bigest. Then its mean that it work on resonance LC circuit. Let say you use 1 mikrofarad capasitor, then on it voltage you check with metter is 40 volts. Then you use 2 mikrofarad, voltage 43 volts, then use 4 mikrofarads, then 60 volts, then 5 mikrofarads, then let say 70 volts, then 8 mikrofarads, then let say 60 volts. That mean that LC resonance is on 5 mikrofarad capasitor and tick wires can makes hot.

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1797 on: June 04, 2013, 03:20:49 PM »
Hi Itsu,

Many thanks for showing this load test!  I assume if the ON time of the shorting pulse could be much narrower than it was, then the increase of the input power draw would be less?  Also, the fall time of the pulse (when it switches OFF the MOSFET)  determines the amplitude of the spike, so can you see any improvement possibility?

Thanks,  Gyula


Using a 220V-12V transformer driven by a variac from mains, i was powering a 12V/21W bulb via the MOSFET shortener
I used the single diode in the drain, so not the FWBR.

One probe was across the bulb showing the voltage and the other one was across a 0.1 Ohm resistor in the bulb return lead measuring the current.

We see some increase in light intensity when shortend, but also the input on the variac increases from 22W till 30W.

Video here: http://www.youtube.com/watch?v=CpWrPrwPcWo&feature=youtu.be

Regards Itsu

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1798 on: June 04, 2013, 03:50:38 PM »
Many thanks for showing this load test!  Also, the fall time of the pulse (when it switches OFF the MOSFET)  determines the amplitude of the spike, so can you see any improvement possibility?
He could go below 100ns pulse width with his MOSFET DSRD driver (without the associated toroid and the DSR diode, attached).

Also, notice, that Itsu's load is not powered by the spikes only, but it is also powered by the rectified sine wave. 
He could use Zener diodes in series with his load/bulb so that only spikes get through.

I don't think he will want to make these changes, without understanding what they are supposed to accomplish.

gyulasun

  • Hero Member
  • *****
  • Posts: 4117
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1799 on: June 04, 2013, 04:06:59 PM »
He could go below 100ns pulse width with his MOSFET DSRD driver (without the associated toroid and the DSR diode, attached).

Also, notice, that Itsu's load is not powered by the spikes only, but it is also powered by the rectified sine wave. 
He could use Zener diodes in series with his load/bulb so that only spikes get through.

I don't think he will want to make these changes, without understanding what they are supposed to accomplish.

Hi Verpies,

I agree,   using MOSFET driver can achieve less than 100ns pulse width, together with even less switch-off time.
Yes, I was aware of his load powered by the rectified secondary sinewave voltage, the Zener diode usage is a good idea to separate the rectified sinewave from the spike of the collapsed field.
For those not getting these things:  the shorter the ON time of the shorting switch i.e. the shorter the pulse width, the less influence will the shorting have on the input power draw.  And the faster the action of the switch-off event, the higher the induced spike amplitude will be. 
I am not suggesting that this process gives extra output over the input, I have not done such tests.

Thanks, Gyula