Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719278 times)

Grumage

  • Hero Member
  • *****
  • Posts: 1113
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1770 on: June 01, 2013, 09:30:13 PM »
What is the voltage across the 20μF capacitor ?
What are the values of the two unmarked capacitors ?

Dear Verpies.

My apologies... Applied voltage for me is 20Vdc. The 2 unmarked caps form a voltage multiplier. I copied these from the original circuit diagram posted by MenofFather....http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/msg361673/#msg361673  I have not used them with my circuit as I am using a 35/0/35 to 240V toroidal mains transformer.

Cheers Grum.

Thaelin

  • TPU-Elite
  • Hero Member
  • *******
  • Posts: 1093
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1771 on: June 02, 2013, 02:21:01 AM »
   It was said that the tl494 was widely used in smps's. 4 down and all I have found is nada or a dna1002 which really seems to be a replacement for it. Can anyone confirm this? None local to be had so will have to order o/l otherwise.

thay


MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1772 on: June 02, 2013, 05:36:43 PM »
Would it be feasible to have a MOSFET driving a rotating switch - having a pot to regulate the gate frequency of the MOSFET for accurate tuning...thus protecting the MOSFET  ?

Regards...
Yes, you can run rotating swich. But duty cycle depends of contruction, who swich wire... If I good understand...

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1773 on: June 02, 2013, 05:42:18 PM »
What is the voltage across the 20μF capacitor ?
What are the values of the two unmarked capacitors ?
Two unmarked capasitors is not important. Pantiuchov (autor) say, that transformer and drosel not important. Maybe on transformer output nod need this diodes and capasitor, I dont know, but guest if he say, that transformer not important. It just can be old his schematic and have many not important details.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1774 on: June 02, 2013, 05:49:49 PM »


http://www.overunity.com/12736/kapanadze-cousin-dally-free-energy/dlattach/attach/124238/image//
Maybe need to make work this schematic find resonant frenquency of LC circuit. This formula http://www.1728.org/resfreq.htm Inductance can check with some multimeteers. And maybe then sarch frenquency in range about LC circuit resonant frenquency. Let say it is 30 kiloherc. Then you searching, then in miliampermeter makes 0 betwen 20 and 40 kiloherc. Pantiuchov very not clearly explayn, so I not very good understand how need find easyly needed frenquency.

TEKTRON

  • Sr. Member
  • ****
  • Posts: 300
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1775 on: June 02, 2013, 07:24:56 PM »
   It was said that the tl494 was widely used in smps's. 4 down and all I have found is nada or a dna1002 which really seems to be a replacement for it. Can anyone confirm this? None local to be had so will have to order o/l otherwise.

thay
Thay, is this what you're looking for?
http://www.mouser.com/Search/Refine.aspx?Keyword=TL494&gclid=CLvnw9XvxbcCFWFyQgodWTwA9g

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1776 on: June 02, 2013, 07:48:31 PM »
Thay, is this what you're looking for?
http://www.mouser.com/Search/Refine.aspx?Keyword=TL494&gclid=CLvnw9XvxbcCFWFyQgodWTwA9g


Can be found  in old computer switched power supply , but more in AT based (very old)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1777 on: June 02, 2013, 08:09:38 PM »
  @menofFather:
     Look at this video, from Tiger (possibly).  Is this showing a self runner?  Looks like a simple feed-back path back from the center tapped coil back to the primary coil circuit.  The main thing is it self running, or not.
It shows a circuit very similar (primary coils) to my version of the Lasersaber 2.0 Joule Ringer circuit that I'm currently using, but with some filter caps, a resistors or two, but other than that it is very similar to my set up. Although wired totally different, with center tap from the output coil going to ground. 
 There is a clear diagram, and sharper focused video for a change.
  http://www.youtube.com/watch?NR=1&v=HJ0yrCKafaQ&feature=endscreen

  If Gansha is corrent then Akula was replicating some of Tiger's work, but I think that there is a
lot more that we don't know, yet, nor are either one of them telling us.
 
  I have gotten NO reply to my e-mail from Akula,  which also makes me think...that this is a serious no joke device, and from which there will not be any further information (freely) given. As it may also really have been sold, as was mentioned. 

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1778 on: June 02, 2013, 08:54:41 PM »
  @menofFather:
     Look at this video, from Tiger (possibly).  Is this showing a self runner?  Looks like a simple feed-back path back from the center tapped coil back to the primary coil circuit.  The main thing is it self running, or not.
It shows a circuit very similar (primary coils) to my version of the Lasersaber 2.0 Joule Ringer circuit that I'm currently using, but with some filter caps, a resistors or two, but other than that it is very similar to my set up. Although wired totally different, with center tap from the output coil going to ground. 
 There is a clear diagram, and sharper focused video for a change.
  http://www.youtube.com/watch?NR=1&v=HJ0yrCKafaQ&feature=endscreen

  If Gansha is corrent then Akula was replicating some of Tiger's work, but I think that there is a
lot more that we don't know, yet, nor are either one of them telling us.
 
  I have gotten NO reply to my e-mail from Akula,  which also makes me think...that this is a serious no joke device, and from which there will not be any further information (freely) given. As it may also really have been sold, as was mentioned.
Tiger had simple experiment for feedback path in his channel on http://www.youtube.com/watch?v=bcftGrBEaL0 It was similar to Joule ringer circuit in general but different from Pantiuhov's.
Ganza is trolling all around in Russian and English forums and I would keep far away from him because this guy has too much negative and missleading things in his posts(full time paid troll by special interest?).
Akula replicated most of Romanov's work if there is no NMR involved (which is suspected most).
Pantiuhov's circuit is basic resonant transformer with half sine wave and half square wave with spikes. The collection and conversion of these spikes go to second resonant LC on 10 times lower frequency where it makes induction in another part of autotransformer so the energy becomes usable again and is fed back to same circuit. That also express itself in Grumage's first try with 30 seconds of self-sustaining run time. This circuit will be improved and one day you might see successful replication of basic principle.

Hopefully it will be more clear for now... ;)

dllabarre

  • Hero Member
  • *****
  • Posts: 750
    • Portal Page
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1779 on: June 02, 2013, 09:36:02 PM »
T-1000
In this schematic. 
Based on L2 wire length the calculated resonate freq of L2 is 24.1mHz.  You confirmed this a few days ago with me.


What freq should the L2C2L3 tank circuit be?  24.1mHz?
I have L2 & L3 inductance values.
I'm trying to determine what value C2 should be.
If I know the inductance and freq I can calculate the size (Farads) of C2 using an online LCR calculator.


Thanks for your help
DonL

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1780 on: June 02, 2013, 09:40:53 PM »
  @menofFather:
     Look at this video, from Tiger (possibly).  Is this showing a self runner?  Looks like a simple feed-back path back from the center tapped coil back to the primary coil circuit.  The main thing is it self running, or not.
It shows a circuit very similar (primary coils) to my version of the Lasersaber 2.0 Joule Ringer circuit that I'm currently using, but with some filter caps, a resistors or two, but other than that it is very similar to my set up. Although wired totally different, with center tap from the output coil going to ground. 
 There is a clear diagram, and sharper focused video for a change.
  http://www.youtube.com/watch?NR=1&v=HJ0yrCKafaQ&feature=endscreen

  If Gansha is corrent then Akula was replicating some of Tiger's work, but I think that there is a
lot more that we don't know, yet, nor are either one of them telling us.
 
  I have gotten NO reply to my e-mail from Akula,  which also makes me think...that this is a serious no joke device, and from which there will not be any further information (freely) given. As it may also really have been sold, as was mentioned.
This video is Tiger and there is very small power. It selfrunner, but can run from radio waves, but not from self. And in schematic is mistake. In general windings must be parallel to it capasitor.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1781 on: June 03, 2013, 12:30:41 AM »
T-1000
In this schematic. 
Based on L2 wire length the calculated resonate freq of L2 is 24.1mHz.  You confirmed this a few days ago with me.


What freq should the L2C2L3 tank circuit be?  24.1mHz?
I have L2 & L3 inductance values.
I'm trying to determine what value C2 should be.
If I know the inductance and freq I can calculate the size (Farads) of C2 using an online LCR calculator.


Thanks for your help
DonL
C2L3 is 1/4 of L2 resonant frequency and this frequency is resonant for L1C1. Also sorry a bit for confusion, with the 20mHz+ natural frequency is meant for Tesla coil with open end to resonate as virtual antenna with Earth ionosphere and in circuit I posted it is not that case.
The L2 is voltage source same as in shorting coils with opposite polarity and C2 L3 is resonant current source same as in induction cooker.

P.S> This concept is only general idea following directly what Romanov did in latest explanations on youtube and there is way of trial and error to find correct values.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1782 on: June 03, 2013, 12:40:01 AM »
  I realize that the diagram from Tiger is not exactly the same as the device, as the diagram is showing two transistors, and not just one. But where is the mistake?  Does Tiger say that it is running on radio waves, and how much voltage/current is "little power"?
    IF,  it is a self runner (as you can hear it when it kicks on) that is a very important point, even if the output is small.
   You are saying, "Windings must be parallel to it capacitor"?  How should the windings be parallel to the capacitor?

  If feel that these are all important steps taken by Tiger, that have possibly led to where Akula has further taken that technology. And the working ideas were simpler at that point, and easier to understand.

  Here in the TK green box video (below) the ideas were also simple, and the two transistors, were also getting hot, back then, also.
   I see several similarities with what Tiger was doing in his versions of the TK devices.

  Here is a partially translated version of the TK green box back-yard video.  I'm still learning some new things from it.
            http://www.youtube.com/watch?v=OIWi1mELJvY

  TK is saying that it may be possible for even more than 5kw to be drawn from that device.
Wow, that would be awesome, if possible.   That's all I need...
  The charging or feed-back path was done with a large iron-core transformer, going from a coil on the air core transformer to a full bridge rectifier and back to the 12v battery, to recharge it.
  TK says that the input source is not coming from stray electricity, or radio waves, etz... he argues that point, but that it's the same available AMBIENT source as what Tesla talked about.

dllabarre

  • Hero Member
  • *****
  • Posts: 750
    • Portal Page
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1783 on: June 03, 2013, 12:58:27 AM »
C2L3 is 1/4 of L2 resonant frequency and this frequency is resonant for L1C1.


If I understand this then:

C2L3 Freq is calculated to equal a 1/4 of L2 resonate freq
and L1C1 freq = C2L3 freq?


So L2 Resonate freq = 24mHz
and a 1/4 of that is 6mHz.
So C2L3 freq needs to be at 6mHz
and L1C1 freq also needs to be at 6mHz???


DonL

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1784 on: June 03, 2013, 01:04:42 AM »

Using a 220V-12V transformer driven by a variac from mains, i was powering a 12V/21W bulb via the MOSFET shortener
I used the single diode in the drain, so not the FWBR.

One probe was across the bulb showing the voltage and the other one was across a 0.1 Ohm resistor in the bulb return lead measuring the current.

We see some increase in light intensity when shortend, but also the input on the variac increases from 22W till 30W.

Video here: http://www.youtube.com/watch?v=CpWrPrwPcWo&feature=youtu.be

Regards Itsu