Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718104 times)

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1530 on: May 22, 2013, 07:32:57 PM »
Invert short pulses to 180 degrees and you will get what Romanov said over last 2 years... ;)
Invert short pulses 180 degrees with respect to what please?
I think he means inverting short pulses in respect to MenofFather's diagram here.

I have no idea if he implies that this works only with a core inside the winding and/or only on Aviso type motors with moving magnets.
Also, I do not know if he means an opposing current spike in the winding or an opposing voltage spike across the winding.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1531 on: May 22, 2013, 07:47:54 PM »
Can we see any waveforms of this effect?

anandml

  • Full Member
  • ***
  • Posts: 107
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1532 on: May 22, 2013, 07:48:31 PM »
Nick, I think the picture of the Akula PSU is throwing you. Its not an inverter, its a 12V / 10A PSU, so please do not try driving your coil from 220V rectified AC which is dangerous! The PSU that you can't clearly see in the video is running at 25V, 2.5A. I would think this is quite adequate for experimentation purposes.
Yes you are right hoppy, akula is using PSU not an inverter..

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1533 on: May 22, 2013, 07:58:12 PM »


Thanks T1000. These look like multiple spikes at 90 degrees from sine wave peaks. Triggered from a zero-crossing detector?

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1534 on: May 22, 2013, 08:16:49 PM »
Invert short pulses 180 degrees with respect to what please?

I think he means inverting short pulses in respect to MenofFather's diagram here.

I have no idea if he implies that this works only with a core inside the winding and/or only on Aviso type motors with moving magnets.
Also, I do not know if he means an opposing current spike in the winding or an opposing voltage spike across the winding.
There hard to say or oposite or not, I think need just search frenquency then voltage of sine is most big. How say woman who build free energy generator, that from autogenerator need made sine on one coil and then with other coil, inductir leet say of few turns beet exatly with short impulses on sine most bigest amplitude, this makes big curent. So I now understand why need two frenquencies.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1535 on: May 22, 2013, 08:16:51 PM »
Thanks T1000. These look like multiple spikes at 90 degrees from sine wave peaks. Triggered from a zero-crossing detector?
Yes, he showed the spikes close to zero-crossings (90deg) but I'm not sure that was his intention since the caption says that the photo refers to the middle of a tuning procedure.

Also, it is not clear what those two traces mean: current or voltage  ...probe positions are not known, are they?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1536 on: May 22, 2013, 08:16:55 PM »
  Akula's last two videos are showing a 12v to 220v, 400 watt inverter, going to a rectifier, then feeding the driver circuit. So, the driver circuit is getting 220v DC, or so.
  The blurry picture showing the voltage/current is taken of his power supply. I don't think that I'm wrong there.

  And yes, a voltage of 30v, and 2.5 amps is probably the minimum needed to see any effect on the circuit, with the number of windings that are shown on the yoke. And the 3 windings, down stepping it further.
I'm providing lower than that shown input votage/current level.  But, I do still think that his mos-fets are getting close to the 220v rectified input.  Which is then being lowered by the filter caps on the driver, but finally relaying a high voltage and possibly high amp input to the yoke's center tap coil. If we only knew more, it would help.
 
  Menof:  I'll try the cap C1 and see what happens. I'm still working on all this, and especially trying to find the results of high voltage and high amps coming together in resonance.
Your picture is not very indicative, although I get the idea. But, the red wire on my yoke set up as a center tap to opposite wound coils. I am getting about 50 volts out of the 3 turn coil, on just one probe, but less if I connect both. I don't know the amperage but, it ain't much.   Just enough to warp my brain cells...


T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1537 on: May 22, 2013, 08:17:37 PM »

Thanks T1000. These look like multiple spikes at 90 degrees from sine wave peaks. Triggered from a zero-crossing detector?
I - your induction cooker source on resonance in series (90 degrees to voltage) :)
U - Your exciter BEMF or similar circuit injection to short out sine wave of current into opposite polarity for brief time. (Ismael just did direct shorting without secondary source)

The timing is needed for correct polarities so there should be some feedback circuit. I am not going to specific circuit as there are many solutions to achieve anomaly.

@verpies
The blue is current the green is pulses in exciter. Those small short peaks on sine wave are starting point.

Cheers!

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1538 on: May 22, 2013, 08:21:30 PM »
I think need just search frequency then voltage of sine is most big...
...So I now understand why need two frequencies.
Talking only about two frequencies, leaves the phase relationship undefined.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1539 on: May 22, 2013, 08:38:55 PM »
The blue is current the green is pulses in exciter. Those small short peaks on sine wave are starting point.
Sorry to be so dumb, but I lost track about what core coil/winding orientation and about what waveforms we are talking about.
Is it this circuit and this orientation ?

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1540 on: May 22, 2013, 08:48:50 PM »
Sorry to be so dumb, but I lost track what coil/winding orientation and what waveforms we are talking about.
About this schematic?
The few:
1) Short transformer briefly on peaks then collect over voltage to capacitors
2) Short transformer on peaks with much higher voltage in opposite polarity then collect over voltage to capacitor after pulse ends.
3) Have air core transformer primary coil set to resonance in series for maximum amps then inject BEMF/high voltage oscillation of opposite polarity then take out resulting shockwave into capacitor/load.
4) Have case 2) but inject high voltage electric field to high density magnetic field then grab resulting oscilating magnetic field to output coil.

Those all 4 are just to do what just N. Tesla did say about explosive discharges with stray frequency on main frequency.. :)

DreamThinkBuild

  • Hero Member
  • *****
  • Posts: 574
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1541 on: May 22, 2013, 09:16:40 PM »
Hi T-1000,

Quote
1) Short transformer briefly on peaks then collect over voltage to capacitors
2) Short transformer on peaks with much higher voltage in opposite polarity then collect over voltage to capacitor after pulse ends.
3) Have air core transformer primary coil set to resonance in series for maximum amps then inject BEMF/high voltage oscillation of opposite polarity then take out resulting shockwave into capacitor/load.
4) Have case 2) but inject high voltage electric field to high density magnetic field then grab resulting oscilating magnetic field to output coil.

That is interesting. If we go by Charles Steinmetz thoughts on electric fields with the space around the conductor holding both electromagnetic energy(high current coil, LF, pulsed at peaks) and electrostatic potential(high voltage coil, HF) is that is what is superimposed by close proximity on the output coil?

Is this right?
We have a high current low voltage source which spikes the peaks to add an electromagnetic field. Then we have a high voltage low current signal to add electrostatic potential. We capture the reflection with tuned caps. Then collect the change in gradient across the collector?

Elementary Lectures on Electric Discharges, Waves and Impulses and other Transients
Book: http://archive.org/details/elementarylectur00steirich

Theory and Calculation of Transient Electric Phenomena and Oscillations
Book: http://archive.org/details/theoryandcalcul12steigoog

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1542 on: May 22, 2013, 10:01:15 PM »
1) Short transformer briefly on peaks then collect over voltage to capacitors
Do you mean like on the schematic below?
Are you claiming that the capacitor C1 will be charged to more than 15V and not at the expense of the energy delivered by the AC power supply ?

Also, what's the purpose of W2 ?

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1543 on: May 22, 2013, 10:19:02 PM »
Do you mean like on the schematic below?
Are you claiming that the capacitor C1 will be charged to more than 15V and not at the expense of the energy delivered by the AC power supply ?

Yes, up to 600 volts due self induction of coil. Just entire shorting circuit with diode bridge should be after W2.

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1544 on: May 22, 2013, 10:28:43 PM »
Yes, up to 600 volts due self induction of coil. Just entire shorting circuit with diode bridge should be after W2.
Why?
Alas, when the switch S1 starts conducting, then the voltage across W1 is at maximum but current is at zero.
No interrupted current means no flyback pulse (...and even if there was a flyback pulse then it would be shorted out by R1 and the AC voltage source).