Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11717842 times)

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1515 on: May 22, 2013, 05:38:46 PM »
  Menof:
  Yes, the cap is needed after the yoke, as it takes the place of the noisy, or not so noisy spark gap. As we can see from his last video, there is practically no spark, or a very tiny visible spark, going toward the resonator coil. Maybe a big cap is not needed, just a smaller one of the right value. I was even thinking of using a leyden jar, as this has been done before, and worked well. I just haven't gotten there yet, but I will.
I mean not this capasitor. If you put 1000 V pulses, then capasitor C1 and brown wire in picture must is LC contur and it vibrate on self frenquency, and you must put 1000 volt impulses in resonance on sinus. Let say C1 and brown vibrating on 1 kiloherc, then pulses mus be on higher ampiltude exactly with that frenquency, exatly 1 kiloherc, or let say 100 herc, on each ten put pulse, that must be beter than 1 koloherc, I think. I see other pepole divice who get selfrunning and they seems speak about that or do that, LC vibrating on 1 kiloherc let say and you put impulses on 100 herc.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1516 on: May 22, 2013, 05:41:40 PM »
   As I can't clearly see anything, and much less the values on the picture of the power supply. Do they indicate what the voltage is at the center tap of the 12 and 12 turn coil coming from the driver circuit. As the drive circuit is being feed by 220v rectified Ac. or not?
So, the question is: what is the voltage/current value at the center tap, of the opposite wound dual 12 turn coil, or the value reading at the output of 3 turn coil. As well as what is the capacitor value that follows after the yoke, at least an approximation of the value to make that circuit resonate.  That is what I'm trying to do, at least understand enough to replicate what he is showing. The rest of the device is not rocket science.

Nick, I think the picture of the Akula PSU is throwing you. Its not an inverter, its a 12V / 10A PSU, so please do not try driving your coil from 220V rectified AC which is dangerous! The PSU that you can't clearly see in the video is running at 25V, 2.5A. I would think this is quite adequate for experimentation purposes.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1517 on: May 22, 2013, 05:46:10 PM »
Here how must be.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1518 on: May 22, 2013, 05:51:51 PM »
   As I can't clearly see anything, and much less the values on the picture of the power supply. Do they indicate what the voltage is at the center tap of the 12 and 12 turn coil coming from the driver circuit. As the drive circuit is being feed by 220v rectified Ac. or not?
So, the question is: what is the voltage/current value at the center tap, of the opposite wound dual 12 turn coil, or the value reading at the output of 3 turn coil. As well as what is the capacitor value that follows after the yoke, at least an approximation of the value to make that circuit resonate.  That is what I'm trying to do, at least understand enough to replicate what he is showing. The rest of the device is not rocket science.

"As the drive circuit is being feed by 220v rectified Ac".
Yes, mosfets if feeded with 220 volts. I think because he get that good result. Mosfets, I think is generate short pulses, so in other case curent can be very hight. So on 3 turns coil is about 50 volts, on red coil on tube is 50 volts or 100 volts, because on resonace voltage with capasitor (C2 in my schematic) can incress.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1519 on: May 22, 2013, 05:56:14 PM »
  I'm not going at this blindly, as I've already shown previously, nor am I trying to replicate his last video. 
So, don't get side tracked.  I'm hoping that you guys with all the toys, will help, as much as the guy next door is doing.
  I can only do what I can do, if this is not the horse that I can ride, I may have to look for another horse.
This device has already been sold, so It's probably just a matter of time before it's available at a price.  I hope.
 
  Menof: thanks for your explanation,  I almost got it. 
  If I can get the light bulb to light, the way things are currently set up, then the rest is not so difficult to do. So, I'm trying to get at least that small light at the end of the tunnel, I'll then know what to do, after that.


MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1520 on: May 22, 2013, 06:01:38 PM »
There how in Akula. Red amplidute can be not 220 volts, but 400-800, becaus it can vibrating on self resonant frenquency, and then pulses it make up, make up and amplitude make bigger and bigger.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1521 on: May 22, 2013, 06:14:06 PM »
There how in Akula. Red amplidute can be not 220 volts, but 400-800, becaus it can vibrating on self resonant frenquency, and then pulses it make up, make up and amplitude make bigger and bigger.
Invert short pulses to 180 degrees and you will get what Romanov said over last 2 years... ;) That will match Tesla quote on some degree as you need higher frequency for getting better effect. Also Ismael Aviso did same if you like to compare.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1522 on: May 22, 2013, 06:26:03 PM »
Invert short pulses to 180 degrees and you will get what Romanov said over last 2 years... ;) That will match Tesla quote on some degree as you need higher frequency for getting better effect. Also Ismael Aviso did same if you like to compare.

Invert short pulses 180 degrees with respect to what please?

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1523 on: May 22, 2013, 06:26:12 PM »
You can make a conventional device without knowing its working principles but that just does not apply to unconventional devices.
That's logical.

Even with conventional devices conventional working principles are used behind the scenes, e.g. metal wires conduct electric current when they touch, they form closed circuits, current loops create magnetic fields, changing magnetic fields generate voltage in conductor loops, current + resistance = heat, capacitors let AC pass but not DC, etc...
All of the above may just seem like common sense, but in fact it represents a body of conventional knowledge and conventional working principles.

Without them it would be very hard to build even the simplest circuit, e.g.: an ignoramus might not scrape off the enamel when connecting a light bulb to a battery with magnet wires, or he might use just one wire, or a nylon fishing line, or he might wind a coil with uninsulated metal wire (I did exactly that when I was a toddler).

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1524 on: May 22, 2013, 06:33:31 PM »
Invert short pulses 180 degrees with respect to what please?
Please watch this explanation for it - http://youtu.be/rv7C7YOetDY?t=29m28s
Ismael talks about shorting but if you apply short pulse opposite to sine wave on peak instead of shorting it goes even higher.

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1525 on: May 22, 2013, 06:40:15 PM »
Please watch this explanation for it - http://youtu.be/rv7C7YOetDY?t=29m28s
Ismael talks about shorting but if you apply short pulse opposite to sine wave on peak instead of shorting it goes even higher.


Do you know why ? I think it's easy... damn thing should be known to everybody, I don't know why ittook me so long to realize that ......

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1526 on: May 22, 2013, 06:44:06 PM »

Do you know why ? I think it's easy... damn thing should be known to everybody, I don't know why ittook me so long to realize that ......

Finally someone got the point! :D

verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1527 on: May 22, 2013, 07:23:18 PM »
Please watch this explanation for it - http://youtu.be/rv7C7YOetDY?t=29m28s
Ismael talks about shorting but if you apply short pulse opposite to sine wave on peak instead of shorting it goes even higher.
What goes higher?

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1528 on: May 22, 2013, 07:23:57 PM »
What goes higher?
The voltage with same amperage :)
When short pulse is finished the remagnetization on 180 degrees occur in coil with great power.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1529 on: May 22, 2013, 07:27:29 PM »
The voltage with same amperage :)

Can we see any waveforms of this effect?