Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11716044 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1395 on: May 16, 2013, 11:58:07 PM »
  Grum:
   The offer on the scope is very kind of you. I'll think about how it could be made available to me here in Costa Rica, without costing an arm and a leg. DHL, and such are big ripoffs, and would charge more than it may be worth.
   Concerning the yoke. I have removed a 3 inch yoke shown in the picture below, from an old 15" CRT monitor, of which I have two of.  But, I suggest calling the Tv repair shops, or friends, or Pc repair shops, or even recycle centers, and ask to buy one from them, if possible. There are still some around, mine still works, although I have flat screens now. 
  I would also think, that the bigger the yoke, the better, as they come in sizes up to about 5 or 6 inches across. And I feel that the relation of the amount of copper wire that is being fluxed and oscillated, is proportional to the output power obtained.
  If that the big ferrite toroid that you've mentioned would work as well, I don't know. Akula did mention that the slightly smaller yoke that he first worked with didn't work, or not as well.
  I'm still doubtful that this has anything to do with a certain type of ferrite in Russian yoke, only, and that that is why the yoke device has been shown to work. Time will tell, but I'm gearing up to show that this is not the case.
  As T-1000 has mentioned, there may not be any reliable diagrams, schematics, or specs, to work from. Don't trust any of it, yet.  The only thing that we have to go on, is the blurry video.  That's enough for me, to get hands-on into this project, which may be as close to magic, or what ever, as it may seam to most.

  For those of you that have an hour or so to spend on a great interview, I can recommend this:
  THRIVE, Foster Gamble, on Free energy, and other very interesting topics.
http://www.youtube.com/watch?v=oO39Bif9hL0

 

« Last Edit: May 17, 2013, 05:05:19 AM by NickZ »

Ganzha

  • Full Member
  • ***
  • Posts: 156
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1396 on: May 17, 2013, 02:38:08 AM »
look at this - I showed right schematic in July 2012 but nobody didnt replicate untill now!


T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1397 on: May 17, 2013, 02:51:56 AM »
look at this - I showed right schematic in July 2012 but nobody didnt replicate untill now!
Если собереш сам и покажеш миру в рабочем состяний по той схеме, все начнут смотреть по другому.
If your will assemble this circuit yourself and will show to world in working state, everyone will start to look from different angle.

It is the problem this world have - few are testing the rest are speculating...

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1398 on: May 17, 2013, 07:46:41 AM »
   There is a detail in the Akula video that may be of some importance. Which is, the fact that the ground wire is going to an area several yards away from the device's location (chair on the patio). I feel that this may not be anything to overlook. As there may be a relation to the water that can be heard, the wet ground (or sinking ground), and flowing water in that location, and an improved ability to generate an output by the device.
  As I have a well in my back yard, about the same distance away from my house, as what is shown in the video, I may use it to test this idea. As it is possible that a flowing source of water, may contribute to the added ability to produce an increased output. This may not only improve the ability of the earth grounding wire, but may also be of benefit, in other possibly unknown ways.


MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1399 on: May 17, 2013, 08:12:33 AM »
look at this - I showed right schematic in July 2012 but nobody didnt replicate untill now!
Thirst, this scematic not enought clear. And second you can make mistake or lie. Need proof. Or more details...

Shokac

  • Sr. Member
  • ****
  • Posts: 378
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1400 on: May 17, 2013, 09:30:02 AM »
For everyone who got time and want to do series of experiments, please see test case 1 attached:

C2, L3 and L4 is in serial resonance.

For "induction cooker" use ZVS with 50V. ZVS is circuit with automatic resonance, but without capacitor in primary windings.

Please, look this akula0083 video.
http://www.youtube.com/watch?v=5w9nJahkFB0

Where is connect second wire of L2 ??? ?
Where is connect second wire of L5 ??? ?


verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1401 on: May 17, 2013, 10:40:25 AM »
JNaudin done this setup and he replicated successfully  but he failed to make a self run.
http://jnaudin.free.fr/gegene/gegene13en.htm
Has JNaudin done what Ghanza and T-1000 are proposing ?
Namely, putting bifilar wound (in bucking mode) coil inside a HF inductive heater coil (perpendicularly or parallelly).

...you need induction cooker type circuit connected to your yoke then apply resonance in series to air coil. It will be OK only when will start to heat up wrench inside of air coil. Next, you need to modulate that magnetic field with choke inside of air coil and see what output you get in coil on top of air coil.
and keep in mind this
Regarding Ganzha's diagram - Normally two halves of bifilarly wound coil cancel their inductance when they are connected in bucking mode (there are always two ways to connect a bifilar coil, see here).  In other words, they behave just like a straight piece of wire (especially helical coils, a.k.a. solenoids).

Also, a solenoidal inductive heater coil will not induce directly any net current in such bifilar coils, because the HF EMF in each bifilar-half will cancel out (that's the essence of bucking mode). On the diagram below this means that the HF AC from the outer coil will not directly induce a net EMF in the inner bifilar bucking coil.

However the outer inductive heater coil will have an influence on the matter that the inner bifilar coil's windings are made out of and it will influence any shields or cores that are inside it (even if it is rotated 90deg.)

T-1000 suggests that this influence will be anomalous and will lead to unexpected release of energy (especially when the core is saturated as manifested by rapid heating).

That arrangement and saturation of the core resembles the Michael Meyer patent.
« Last Edit: May 17, 2013, 12:56:58 PM by verpies »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1402 on: May 17, 2013, 05:00:09 PM »
  MenofFather:
  What you are showing in the picture of a previous way to connect the coils up, possibly to test the induction heater type of reaction.  The 3 turn output from the yoke is not being used. And was not the final approach to the output obtained from the big air coil/ choke set up. As you understand the video, better than I do, please let us know why he was doing that. What I don't know is how much voltage/current he is putting into that driver in the first place, as he is showing one lit bulb.
  Can the scope shots be read? Do they indicate anything, Verpies?

   The ganzha posted diagram is also very different from what akula is doing, and we have no proof that it works. Or do we? The yoke capacitor is in parallel, not in series, and it is showing a spark gap. Which is not the way that akula has it. He has moved on from that lay out, done previously.
  As I had mentioned, if the center tapped yoke is wound with 12 turns, in opposing direction, the output of the 3 turn coil is practically 0. However there is an output from the top of the big air coil, never the less, lighting a bulb. That is what is different here than with any other normal induction circuit.
  I also repeat, that we need to know more about the choke, which is what I'm hung up on now.
Maybe T-1000 can e-mail akula and ask him to give more info about the choke and the chokes capacitor that he used.

  The second to last akula video lay out is very simple to make, other than the drive circuit. All the coils can be wound in only an hour or two. Maybe a CFL bulb driver circuit can be used, to test the coils with, also.
 I've already explained where to get the yoke. There is no reason that nobody is building this self-runner device, that almost nobody else in the world has produced.


verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1403 on: May 17, 2013, 05:25:46 PM »
Can the scope shots be read? Do they indicate anything, Verpies?
I don't even know the probe positions :(

The ganzha posted diagram is also very different from what akula is doing, and we have no proof that it works. Or do we?
No. You asked us to work without a proof of OU operation.
I don't even know what the most credible Akula's schematic diagram is anymore.

The yoke capacitor is in parallel, not in series, and it is showing a spark gap.
Ganzha's diagram does not show a spark gap or a yoke.  It only shows a Royer oscillator powering a 5T+5T center-tapped primary and a bucking bifilar secondary winding.
The capacitor is part of that primary oscillator.  All that matters on this side of the transformer is the frequency, shape/spectrum, phase and amplitude of the current waveform flowing in that primary. There are soooooo many methods to accomplish the same primary waveform (including an induction cooker).

The magic is supposed to happen after the primary winding is oscillated by the Royer or a Cooker, etc.. and its influence on the bucking bifilar secondary (and/or on eventual cores, shields, slotted pipes, etc...), causes an anomalous energy release to the secondary.

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1404 on: May 17, 2013, 05:37:10 PM »
Verpies said,
Quote
Regarding Ganzha's diagram - Normally two halves of bifilarly wound coil cancel their inductance when they are connected in bucking mode (there are always two ways to connect a bifilar coil, see here).  In other words, they behave just like a straight piece of wire (especially helical coils, a.k.a. solenoids).

But  the "bucking mode" as illustrated (which I call "hairpin" bifilar)  can have much lower inductance than a "straight" piece of wire the same length, especially if that wire is wound into a solenoid on a core with high permeability. If the hairpin coil is wound carefully it can have _zero_ measurable inductance, but the straight wire of the same total length, arranged in any other manner, will have measurable inductance and it can be quite high.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1405 on: May 17, 2013, 05:49:55 PM »
  Ok, I didn't look at that diagram very well, nor do I understand it either. You are right of course.
  There have been a ton of diagrams posted, which who knows which if any are worth trying to replicate.
If this one that you are mentioning is working, then why is ganzha not replicating it?  To prove the point.
   But, I'm not suggesting that his diagram be replicated, as there is no proof that that is a working system. The akula video is the only proof that I am working with, as even the hand drawn diagram is not correct, or any others.
   I'm only kindly suggesting that you try to make a replication, but, not asking you to do so. It's up to you, of course, or anyone else. It took akula a while to figure this out, not overnight or in a day or two, with no previous device to copy. At least that is how it seams to me.
  I don't know if Tiger has or had a self runner, or not, as his previous videos are so blurry, nor could I understand them either.


verpies

  • Hero Member
  • *****
  • Posts: 3473
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1406 on: May 17, 2013, 05:51:37 PM »
But  the "bucking mode" as illustrated (which I call "hairpin" bifilar)  can have much lower inductance than a "straight" piece of wire the same length, especially if that wire is wound into a solenoid on a core with high permeability. If the hairpin coil is wound carefully it can have _zero_ measurable inductance, but the straight wire of the same total length, arranged in any other manner, will have measurable inductance and it can be quite high.
That's true.
All the more reason to be astonished when seeing 6kW generated in this hairpin bifilar secondary on Ganzha's diagram.

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1407 on: May 17, 2013, 06:05:48 PM »
C2, L3 and L4 is in serial resonance.

For "induction cooker" use ZVS with 50V. ZVS is circuit with automatic resonance, but without capacitor in primary windings.

Please, look this akula0083 video.
http://www.youtube.com/watch?v=5w9nJahkFB0

Where is connect second wire of L2 ??? ?
Where is connect second wire of L5 ??? ?
Personally i would not blindly follow those videos because the result cannot be "copy-paste" process.
The induction cooker circuit is designed to keep frequency on different loads and is easy for everyone to get. That's why I advised to use it as generator. The only drawback is, you need calculate wire lengths for coils based on circuit frequency range limits. The basic electronics design principles apply there.

Has JNaudin done what Ghanza and T-1000 are proposing ?
Namely, putting bifilar wound (in bucking mode) coil inside a HF inductive heater coil (perpendicularly or parallelly).

T-1000 suggests that this influence will be anomalous and will lead to unexpected release of energy (especially when the core is saturated as manifested by rapid heating).
Naudin did not do anything with scalar wave generation and taking energy from that point. Also when it comes to magnetic fields making scalar components  and using resulting field for energy transformation - this is black hole in physics. The conventional model does not apply in that case and everything need to be made from scratch.  So everyone need to do experiments first then make theories from what they get in results :)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1408 on: May 17, 2013, 06:06:21 PM »
  The primary opposing winds on a yoke core, is not the same a bifilar wound coil, wound together on a straight tube, or toroid core.
 
  T-1000:
  But, at least we have a video, or picture, of what the akula circuit looks like. Blindly is not quite the case here.  That is enough for me, to start with. No theories needed, just hand-on replication, and observing the results.  And the opposing winds is part of the key, and may not be the same with just any type bifilar wound coil. Yes, the turn count is important.  There MAY not be an aluminum liner in the last akula video, either, which suggests that it may not be needed. This is what we need your help with, as you have opened the door. I would gladly do it, but you are much better at communicating with him, or anyone else that can speak with him, like MenofFather, or someone else, from this forum thread, or from the cousin thread.

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #1409 on: May 17, 2013, 06:13:33 PM »
  MenofFather:
  What you are showing in the picture of a previous way to connect the coils up, possibly to test the induction heater type of reaction.  The 3 turn output from the yoke is not being used. And was not the final approach to the output obtained from the big air coil/ choke set up. As you understand the video, better than I do, please let us know why he was doing that. What I don't know is how much voltage/current he is putting into that driver in the first place, as he is showing one lit bulb.
  Can the scope shots be read? Do they indicate anything, Verpies?

   The ganzha posted diagram is also very different from what akula is doing, and we have no proof that it works. Or do we? The yoke capacitor is in parallel, not in series, and it is showing a spark gap. Which is not the way that akula has it. He has moved on from that lay out, done previously.
  As I had mentioned, if the center tapped yoke is wound with 12 turns, in opposing direction, the output of the 3 turn coil is practically 0. However there is an output from the top of the big air coil, never the less, lighting a bulb. That is what is different here than with any other normal induction circuit.
  I also repeat, that we need to know more about the choke, which is what I'm hung up on now.
Maybe T-1000 can e-mail akula and ask him to give more info about the choke and the chokes capacitor that he used.

  The second to last akula video lay out is very simple to make, other than the drive circuit. All the coils can be wound in only an hour or two. Maybe a CFL bulb driver circuit can be used, to test the coils with, also.
 I've already explained where to get the yoke. There is no reason that nobody is building this self-runner device, that almost nobody else in the world has produced.
"  The 3 turn output from the yoke is not being used. " In this video - yes.
http://www.youtube.com/watch?v=5w9nJahkFB0
If you about this video "What I don't know is how much voltage/current he is putting into that driver in the first place, as he is showing one lit bulb. " then his power supply show 30 volts and 0-0.06 amps about. Voltage efective on lamp is 140 volts, how I understand. But or correct show power supply for his construction I not shore. It better use smoth capasitors on power supply...

"As you understand the video, better than I do, please let us know why he was doing that."
About what video you speak and about what doing he you speak exactly?..