Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715839 times)

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8130 on: March 20, 2015, 04:12:43 AM »
I got your back Nick, I am just way behind and in a bind waiting for parts.

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8131 on: March 20, 2015, 04:21:20 AM »
more pictures sorry about the size i know i know small pictures i study electronics not computers.

TinselKoala

  • Hero Member
  • *****
  • Posts: 13958
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8132 on: March 20, 2015, 05:15:43 AM »
Well... I approve of your home-made circuit boards!

May I offer some advice?

1. Those blue 3-position connector blocks make excellent mosfet sockets. Way better than soldering big wires to the mosfet leads themselves, and it makes it easy to change mosfets should they fail.
2. Ferric Chloride is a lot safer than HCl-H2O2 to work with to etch your boards. It takes a little bit longer but no noxious corrosive fumes are generated, and you can just pour the used etchant back into the original bottle, and then when it's too weak to work well, take the whole thing to the waste disposal depot.
3. I prefer to drill the holes first with a #60 or #58 drill bit, then "connect the dots" with the resist pen, then finally perform the etching. I find this to be the easiest way to do the boards. You can tape your paper layout pattern to the blank PC board material and use a sharp pinpoint to "prick" the hole positions for precise locations, then drill, sketch and etch.
4. With the Ferric Chloride etchant system, an ordinary "Sharpie" brand black marker pen works just fine for the resist, you don't need to spend more money for expensive special pens. Just sketch your traces in well and don't worry, it will work fine. Remove with acetone or alcohol after etching. You can also use ordinary packing tape for large areas, fine tape strips for lines, or even tape the whole board and use a fine hobby knife to cut and remove bits of tape to expose the copper for etching.

Nice work, best of luck to you!

(You can resize your photos in any convenient photo editing or graphics application, like Paint for Windows, mtPaint,  or Gimp for any platform. The maximum width should be kept under 1024 pixels wide so that comments don't run off the page and get hard to read ...)

 ;)


NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8133 on: March 20, 2015, 06:42:36 AM »
  Geo:
   Thanks for the pics, and telling us what you are up to lately.

   Here's a few pics of my current set up. It may look similar to my last posted images, but I'm always changing things around, trying to find the magic combination.
  I've been using my android tablet to help me find the running frequencies, on the oscilloscope app, as well as an android spectrum analyzer app.  It's been kinda fun...  till I can get a real oscilloscope.

  If you are listening for the ringing sound from the yoke, you may be far from the 27.349khz (or so) frequency, that the yoke should be running at. You won't hear it ring at that frequency, unless you're hearing is like a dogs.  Which is why I'm using the spectrum analyzer now, as I couldn't tune the crt by ear. 
Neither of the Akula or Ruslans yokes can be heard audibly ringing...

  Good luck with your pcb layouts, and new circuits. Looking good so far.

Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8134 on: March 20, 2015, 12:39:32 PM »
Good news from Russia folks !!  :D

NEW OU confirmed by Rik - 300 W output with near 0A input current. All trick is in bucking coil configuration on old TV ferrite joke core. Device need very precise timing and fine tunning. Tunning is very difficult. Don't try without good oscillograph and signal generator. To catach effect power supply must be minimum 30Vdc. Mosfet VDS=min 600V/20A. Coil: 16 sections - each 35 windings - 0.2 mm - magnet wire. How to wind look at picture.

Very bad news was: Forum trolls have done their dity job and Rik has escaped - forever.  >:(
On all forums same dirty story. No more comments.


Rik from realstrannik.ru
http://realstrannik.com/forum/svobodnaya-energiya/258-rabotayushchaya-ustanovka-s-kpd-ot130.html

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8135 on: March 20, 2015, 01:13:21 PM »
Good news from Russia folks !!  :D

NEW OU confirmed by Rik - 300 W output with near 0A input current. All trick is in bucking coil configuration on old TV ferrite joke core. Device need very precise timing and fine tunning. Tunning is very difficult. Don't try without good oscillograph and signal generator. To catach effect power supply must be minimum 30Vdc. Mosfet VDS=min 600V/20A. Coil: 16 sections - each 35 windings - 0.2 mm - magnet wire. How to wind look at picture.

Very bad news was: Forum trolls have done their dity job and Rik has escaped - forever.  >:(
On all forums same dirty story. No more comments.

Rik from realstrannik.ru
http://realstrannik.com/forum/svobodnaya-energiya/258-rabotayushchaya-ustanovka-s-kpd-ot130.html

Hi Enjoykin. Looks interesting. Thanks for posting this.
All the best...

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8136 on: March 20, 2015, 02:00:54 PM »
Good news from Russia folks !!  :D

NEW OU confirmed by Rik - 300 W output with near 0A input current. All trick is in bucking coil configuration on old TV ferrite joke core. Device need very precise timing and fine tunning. Tunning is very difficult. Don't try without good oscillograph and signal generator. To catach effect power supply must be minimum 30Vdc. Mosfet VDS=min 600V/20A. Coil: 16 sections - each 35 windings - 0.2 mm - magnet wire. How to wind look at picture.

Very bad news was: Forum trolls have done their dity job and Rik has escaped - forever.  >:(
On all forums same dirty story. No more comments.


Rik from realstrannik.ru
http://realstrannik.com/forum/svobodnaya-energiya/258-rabotayushchaya-ustanovka-s-kpd-ot130.html

hi Enjoykin,

This link you  gave seems to be related to "Rodin Coil" by itself powering mains bulbs.
Yes the effect are indeed interesting but it is not related to Dally or Kapanadze device.

------------------------------------
In the meantime i am just gathering some PLL circuit  since i am a  noob related to high input voltage tesla coil be it 220khz or 1.5Mhz.
Somehow i do have this fear of tesla coil at high voltage around 200VDC or 400VDC since most of us would know the meaning of RF burns firsthand using low voltage below 50Volts. :D :D
Time for me to invest in variac locally for remote turn on and at the same time thinking of hacking a 12-220v inverter to reduce duty cycle so that output can be made variable. ??? ???

Managed to get basic Antenna base PLL circuit for tesla coil working but for low voltage 12volts.Current to Earth achieved 70mA with the use of interrupter at 4046 pin 5. :'(
------------------------------------

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8137 on: March 20, 2015, 04:36:40 PM »
    I had at first made the Akula type yoke coils (primary and secondary coils), on top of a fully wound yoke, which had already been previously wound using 28 gauge magnet wire.   But, at one point I heard the inner magnet wire coil shorting somewhere to ground, but with a hell of a lot of power. Not like what the normal 12v input would produce.
This was a hint to me that lots more power could be had IF the yoke coils are place on top of a much finer wire coil, (including this fine mag wire coil below them).
But, when I wound a new yoke, without the mag wire fully wound below the two primary and secondary coils, I forgot all about that effect, as I never saw it again...
  The picture below is showing that same yoke coil, wound with mag wire, which I later used to wind the akula type yoke primary and secondary coils on, but leaving the mag wire coil below them intact.
  Showing a 60 watt incandescent, and a 60 watt CLF bulb, both partially lit, using 12v, and a single transistor  modified Joule Ringer circuit.

Ed morbus

  • Full Member
  • ***
  • Posts: 131
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8138 on: March 20, 2015, 11:13:43 PM »

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8139 on: March 21, 2015, 08:06:37 AM »
hi everyone,

I have made 2 new discovery today by using my 12volts battery ~0.24Amps boosted to "30volts to 1kv 10ns Nanosecond Generator" which the output is connected to Multimeter "10Amp setting" in A/C mode.

The output of Multimeter is connected to Earth.

At 20khz repetition frequency for nanosecond generator the current to Earth is around 230mA and at 55khz repetition the current to Earth is at 0.5Amps.

My findings the higher the frequency the higher the current flow to Earth provided it's is pulsed at nanosecond at say 1kv as an example.

I am closer in finding out how around 4Amps current measurement via clamp meter to Earth is achieved as demonstrated in Vasmus and Ruslan and i think Akula.

At this point i am now a firm believer in transmitter current transfer to Earth is one of the most important requirement in order to get this device to self run.This is still a work in progress.

I have attached my photos to show the current reading to earth.
Latest update 0.9Amps to Earth at 100khz pulse repetition 1kv 10ns.
----------------------------------------------------
2nd stage of experiment to test for presence of longitudinal wave using avramenko plug to led.

Since i am living in a high rise apartment the only earth i got is water pipe -stainless steel.

2nd discovery for today upon touching AV plug to water pipe in any part of the house i am still able to get Led lit.This is the best discovery i have made to date prove the existence of longitudinal wave.

Reading up some article i am already aware that longitudinal wave travel on the surface of metal conductor.


So Radio frequency is out of the equation since Avramenko plug is not in proximity to the transmitter source and take note my water pipe is the earth.
I am aware metal water pipe is connected throughout the country.PVC pipe is never found outside any home especially the water distribution network.

I have attached a photo of my AV plug which is touching the water pipe in the kitchen which is some distance away from my room.

---------------------------------------------------------------------------------------
Next stage of experiment to find out on how to properly apply nanosecond pulse via interrupter to tesla coil and at high voltage around 150volts to 200volts DC.

This clamp meter demonstration to Earth to show current movement as shown by Russians isn't fake at all.It is just that we are really naive that's all.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8140 on: March 21, 2015, 04:12:55 PM »
   Magpwr:
   The reason that the AV plug will light on the water pipe, and on many other metal surfaces, is due to the capacitive link from the AC grid system.
    If I turn the breakers of at my house, the AV plug's led bulb will NOT light anywhere. Nor will there be leaked Ac power on the floor, tables, and even your own body, if barefoot.
   
   Try it at a friends house (as you are in an apartment), turn off his house breakers, and watch how there will no longer be any light at the AV plug, at all, when touching it to any metal surface. 
 A red led on an AV plug is even more sensitive to those low voltages.

   I still don't believe that there is ANY useable power COMING from the ground. Juice flows from a point of higher concentration to a lower point of concentration.  Not the other way around.

Bat1Robin2

  • Jr. Member
  • **
  • Posts: 94
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8141 on: March 21, 2015, 04:28:31 PM »
Just remember heat pumps can somehow get over unity with heat from the ground. So why cant electricity get over unity with electric from the ground? Compress it, then use it way into the negative region, then let the ground replenish the pumping mechanism to zero level. Open systems do not fall victim to the rules of closed systems. We are in the wild west and anything goes pull from the ground pull from (NMR) matter pull from air. The trick is how to do that. Seems to be fast pulses at resonance are always a common denominator.  Bounce 2 very slightly overunity devices to each other letting it grow in power. The Tesla coil magnifying transmitter and the NMR Yoke bouncing power at 100.1% over unity to each other eventual can get what you need. Some source is from the ground some source NMR ferrite Yoke. Am i on the right track or just bouncing crap??

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8142 on: March 21, 2015, 05:39:49 PM »
   Magpwr:
   The reason that the AV plug will light on the water pipe, and on many other metal surfaces, is due to the capacitive link from the AC grid system.
    If I turn the breakers of at my house, the AV plug's led bulb will NOT light anywhere. Nor will there be leaked Ac power on the floor, tables, and even your own body, if barefoot.
   
   Try it at a friends house (as you are in an apartment), turn off his house breakers, and watch how there will no longer be any light at the AV plug, at all, when touching it to any metal surface. 
 A red led on an AV plug is even more sensitive to those low voltages.

   I still don't believe that there is ANY useable power COMING from the ground. Juice flows from a point of higher concentration to a lower point of concentration.  Not the other way around.

hi Nickz,

In my country the electrical Earth and Water pipe Earthing is not the same.

The power supply is a 12volts battery and one chip signal generator LTC1799 was run from 12volts battery and no scope connected.It's a 100% standalone system off the grid.

However it does interfere with my battery operated FM radio placed near by in the Mhz range.

The nanosecond generator does emit small RF if i place AV plug very near to circuit.

The temporary 50Ohms resistor connected to nanosecond generator output merely suppress most of RF but it still does able to send current to Earth at  lower power.

The objective of the experiment was not about the circuit but about the use of nanosecond pulse at high voltage which does somehow induce current flow to the Earth.

------------------------------------------
Experiment reserved on Sunday is to sync this nanosecond generator to my experimental PLL base pwm generator for kapanadze winding without the use of kacher.

I am curious to know if the receiver/multilayer coil is able to pick up the nanosecond pulse from the water pipe using the scope powered by pure sine-wave inverter.

-------------------------------------------
Little known fact about longitudinal wave is that the amplitude get bigger and bigger as it travel further away from the source.It is unknown to me if the signal would get reflected back from the earth core which is molten iron and back to the tuned receiver multilayer coil.

Imagine dropping a stone in a stagnant pond the circular ripples that you see which flow outwards from the source is the longitudinal wave.If you observe closely the the diameter of the ripples get larger and larger as it move away from the source.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8143 on: March 21, 2015, 06:22:25 PM »
  Magpwr:
  You are suggesting that the AV plug lights on the water pipe in another room of your apartment due to anything but stray capacitance from the AC grid, well, I don't agree.
 I can prove my point, if needed. Which may not be your point, but it is my point.
  Of course water pipes are not the same as house wiring grounding systems, in any country. Who would think that? But, the metal water pipes will pick up the stray AC from the grid. Test it yourself and see, that the AV led will light, even with no nanosecond pulses, or anything else on in the house, if the AC breakers are still on.

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8144 on: March 22, 2015, 08:29:43 PM »
Hi guyz :)

About the ground doubts.
 use a ground pin, or a tubing that is not connected to main water copper tubing,

Nick, the ground is  a source of enhancement! Capacitive wise in my way of seeing it :).
Through my experimentations I witness this effect. never forget how a tesla coil works when connected to ground! :)

take a look akula's Tesla coils test with 2.5 load,  until he reaches resonance with the right tuning, there will be beautiful load :).
https://www.youtube.com/watch?v=1Rr-qTvTrdU



Btw guyz take my pics that i post here, This is what needs to be focused on, The resonance Circuit part.,
 it's method of reaching resonance with the cap in series is crucial :). This is the part where the circuit makes alot of energy
and can work without ground ;).
check this one out.
Two pics below for  a  rough schema.

This is AKula's first device Using the method discribed in the schema.
 https://www.youtube.com/watch?v=cUVvZzeDe5U




You all saw my vids with the ground experimentation and Flyback,
that was a ground pin, And started the unit also on a battery, to see if it's not mains influence.
and it functions the same. :)




Cheerz.
« Last Edit: March 23, 2015, 06:36:04 AM by GeoFusion »