Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11715876 times)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8085 on: March 13, 2015, 01:28:20 PM »
Hi Mag,

Its good to hear that you are making some interesting observations on the transmitter to earth pulsing. I've been out of thinks recently with a broken leg but hope to get back to some experimenting in the next week or so. Could you please provide a fairly detailed schematic of your current setup, as I cannot understand exactly what you are doing. I certainly feel that you are working along the right lines by concentrating with working on the transmitter.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8086 on: March 13, 2015, 02:22:32 PM »
Hi Mag,

Its good to hear that you are making some interesting observations on the transmitter to earth pulsing. I've been out of thinks recently with a broken leg but hope to get back to some experimenting in the next week or so. Could you please provide a fairly detailed schematic of your current setup, as I cannot understand exactly what you are doing. I certainly feel that you are working along the right lines by concentrating with working on the transmitter.

hi Hoppy,

I do wish you get healed soon.

I have attached the modified interrupter base on earlier experiment.

The gate oscillator is running at around 10Mhz which generate pulse width of around 52ns and this is combined with 566khz signal generator.In both case 50% duty.

Opps i made a mistake it should be the other circuit with the 100k trim pot which is connected to the gate with signal generator.No 10k resistor was installed in actual experiment.

Take note at 566khz the pulse width is 1766ns and combine with 52ns(around 1/34th the pulse width of tesla coil at resonance) this is where i got maximum current flow to earth at around 0.14Amp(10Amp settings in multimeter) at around 0.35Amp at 12volts which is boosted to 17volts.

Take note my test tesla coil resonance frequency is actually 566khz but 220volts 5watt bulb don't get lit since i am after maximizing current flow to earth.
Please do not use scope probe as it would tamper with reading.

-----------------------------------------
My latest findings with IRF4905 which is pulsed at positive supply revealed nothing much except it does produce noise at the top of tesla coil if screw driver is near.
220volts 5watt bulb does get lit at lower current draw from battery at around 0.42Amps.

Maximum sound achieve at the tesla coil top is achieve at 139khz(Roughly 1/4 frequency of 566khz) at 80% duty since my mosfet driver TC44551 is the inverted version to IRF4905 which need to see negative to turn on.

For this experiment 74HC132 was not used but just the simple common npn transistor circuit for tesla coil.

---------------------------------------------------

To wrap it up for today my discovery revealed there is relationship with amount of voltage going in to kacher or tesla coil to the current flow to earth."Counterpoise difference increases with higher voltage"

Next stage of experiment(After some planning in my head)-

The only way i think to get to see explosive pulse discharge in Amps to earth might be to apply nanosecond pulse to the primary coaxial(one of the 2 wires in coaxial,outer for nanosecond and innner for kacher circuit) winding of tesla coil while it is still oscillating.


This will be done switching mosfet eg:IRF840 or APT10035LLL at around 52ns pulse width via 1k resistor from (+) to limit current from the capacitor bank 400volts.
This is the one of the way pulse repetition at high frequencies can be accomplished. 

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8087 on: March 13, 2015, 02:53:31 PM »
To wrap it up for today my discovery revealed there is relationship with amount of voltage going in to kacher or tesla coil to the current flow to earth."Counterpoise difference increases with higher voltage"

Hi magpwr. It is normal to have a current flow to an earth ground from both a tesla coil and also
from certain kinds of radio transmitting antennas. Also, yes, a higher voltage will result in higher
current flow as well, since this typically translates to a higher input power into the tesla coil/antenna.
Since this is normal, then where does the over unity come from? It seems there has to be more to it than that.

High power vertical radio antennas can have quite a high ground current, so they will run out a whole array of
ground radial wires from the base of the antenna to act as a ground return to reduce ground current losses, to improve
the efficiency of the antenna, since earth ground itself can be quite lossy. The higher the voltage of your tesla coil, the more ground
current you should see, but again, that is normal for a high voltage tesla coil. Where the over unity comes from remains a question.
All the best...


Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8088 on: March 13, 2015, 03:30:35 PM »
@ Magpwr,

Thanks for the additional info on your experiment.

@ Void,

Yes, you are quite, there will be a current to earth via capacitive coupling on any Tesla coil setup. I assume that Magpwr understands this but has nevertheless observed something unusual relating to the relationship between input current and earth current? It would help to see his measurement points on a full system schematic and test equipment used.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8089 on: March 13, 2015, 03:35:09 PM »
Hi magpwr. It is normal to have a current flow to an earth ground from both a tesla coil and also
from certain kinds of radio transmitting antennas. Also, yes, a higher voltage will result in higher
current flow as well, since this typically translates to a higher input power into the tesla coil/antenna.
Since this is normal, then where does the over unity come from? It seems there has to be more to it than that.

High power vertical radio antennas can have quite a high ground current, so they will run out a whole array of
ground radial wires from the base of the antenna to act as a ground return to reduce ground current losses, to improve
the efficiency of the antenna, since earth ground itself can be quite lossy. The higher the voltage of your tesla coil, the more ground
current you should see, but again, that is normal for a high voltage tesla coil. Where the over unity comes from remains a question.
All the best...

hi void,

I know it is a tough question to answer.But if i don't experiment at all then i shall never know."Learning is for life"

Maybe the longitudinal wave to the earth via explosive pulse discharge may provide some clues in due time hopefully.Maybe it helps in the ringing of the device as a whole. :o


At 17volts supply i got 0.14Amps to Earth using 52ns pulse.But what would result be if i pulse 52ns into coil with around 400volts.

If i am really lucky in my experiment at this voltage i might get to see around  3Amp (0.14Amp x (400/17)) to Earth. :D :D

At this stage i would only be half way completed.






 

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8090 on: March 13, 2015, 03:46:31 PM »
Maybe the longitudinal wave to the earth via explosive pulse discharge may provide some clues in due time hopefully.Maybe it helps in the ringing of the device as a whole. :o

Hi magpwr. Yes, it is quite possible that nano-width pulses are important, as Akula seems to have
put emphasis on that as well for this type of device. Ruslan says the timing of the pulses is very
important as well, so that is the other angle to experiment with. Akula showed on his first self runner
video that the device was self running without the earth ground wire connected. If that was not
a trick, then it seems earth ground is not the main source of the over unity in this type of Akula device.

I have turned my attention to running tests on the ferrite core circuit itself, as I think that is possibly where
the overunity may be coming from. I just don't trust what Ruslan says much any more, as he seems to be playing games. :)

All the best...


magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8091 on: March 13, 2015, 03:54:18 PM »
Hi magpwr. Yes, it is quite possible that nano-width pulses are important, as Akula seems to have
put emphasis on that as well for this type of device. Ruslan says the timing of the pulses is very
important as well, so that is the other angle to experiment with. Akula showed on his first self runner
video that the device was self running without the earth ground wire connected. If that was not
a trick, then it seems earth ground is not the main source of the over unity.
All the best...

hi Void,

Just to let you know 2 experiments i am currently working on or at planning in my head is related to longitudinal wave.

The another is the Don smith base on China  replication using around 220khz.Redesigning the 7.2kv 6x igbt in progress to handle around 100ns pulse width.Earth is optional as well.


Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8092 on: March 13, 2015, 03:56:12 PM »
hi Void,
Just to let you know 2 experiments i am currently working on or at planning in my head is related to longitudinal wave.
The another is the Don smith base on China  replication using around 220khz.Redesigning the 7.2kv 6x igbt in progress to handle around 100ns pulse width.Earth is optional as well.

Sounds good magpwr. You are doing good work. Keep at it!
All the best..

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8093 on: March 13, 2015, 05:03:15 PM »
   I'm still wondering why some guys, like Hoppy, Itsu, and several others that have made a proper grenade/yoke/kacher circuits don't see much improvement at the bulbs output, even when the various frequencies are matched up.
  What are we missing? 

   Hoppy: Thanks for the advice on the scopes, I agree that a regular 2 channel 20000- 40000mhz would be best, but the shipping cost can be more than the cost of the scope. That's why I was interested in the hand held ones, or the ones that can be connected to tablets. Unless I can find a good used scope here. 
But, viewing the signals on a tablet screen (10 in), is great for guys with poor eye sight, like me. 
I'm already using the android app for tablets and phones, but I need to make a 10X probe for it that connects to the tablet.

   From viewing the Ruslan video where he is showing the scope readings from just the grenade, with no Kacher connected, I can see that his grenade is not putting out much, by itself. When he connects a second bulb the first bulb dims by quite a bit.  Very similar to what my grenade is doing.
  What gets me, also, is how Ruslan can start some of his devices using just a small 9 volt battery.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8094 on: March 13, 2015, 06:07:06 PM »
Hi Nick. Here is something else to look at if you are trying to find a scope that works with an Android tablet.
It is a Bluetooth capable 2 channel digital scope. I have no idea if this device is
any good however, and whether it comes with an oscilloscope app for an Android tablet or not.
It also says its max measureable frequency bandwidth is only 1MHz, although the analog bandwidth
is supposed to be 10 Mhz. It looks like you would have to purchase x10 probes for it as well. It may not
be able to measure high enough frequencies for this sort of Akula type device such as up to 2MHz or so,
based on the specs, but you could ask the seller questions if you are interested. It looks like it may
only be useable for frequencies lower than 1MHz, so it may not be too useful. 
BlueDSO oscilloscope for Android and Windows
http://www.ebay.com/itm/BlueDSO-oscilloscope-for-Android-and-Windows-/171710348656?pt=LH_DefaultDomain_0&hash=item27fabbfd70

All the best...

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8095 on: March 13, 2015, 10:39:06 PM »
   Void:
   Might be too low at only 1mhz.  There's a big difference in price on the small portable hand held units, when they go over 1 mhz.
   Thanks for pointing it out.

bringdownthezog

  • Full Member
  • ***
  • Posts: 104
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8096 on: March 14, 2015, 02:35:39 AM »
Hello Void. Enjoykin was perhaps trying to protect the source. I don't know what the situation is with Aleksei and the websites have been acting up all day yesterday. Lets see how the cookie rolls.

Here's the handdrawn circuit and the screencap. Hope this helps.

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8097 on: March 14, 2015, 12:58:07 PM »
hi everyone,

I have attached a short video to show the pulsing of my 5watt 220volts bulb to earth , AV plug with Led and test pen.

The positive power supply for common kacher circuit is merely connected to p channel mosfet IRF4905 and it's switched at around 20hz.

The 5watt 220volts bulb to earth is actually pulsing very fast but in the converted video to 15fps it merely show slow pulsing effect.

I can't bring my phone to close to tesla coil else the phone camera application just shutdown after facing focus problems.
 ---------------
Time to resume with next stage of experiment.

---------------------------------
Just watched another Ruslan video of tesla coil.
http://www.youtube.com/watch?v=ufYa80wU6zg

I just spotted he used multimeter at the output of transformer what i believe to be 24volts to 110volts A/C converter which should get around 170volts....200volts DC to power tesla coil with the use of interrupter.

Remember higher the supply the higher the counterpoise difference.

This video remind me of one of Akula first outdoor video with the use of inverter to boost 12volts battery to high voltage.

There is a huge difference between 200volts dc and what i have applied using 30volts DC to kacher previously.The use of interrupter would help prevent a disaster as what was shown in Ruslan video a blown fuse.









Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8098 on: March 15, 2015, 06:35:28 PM »
Hello Void. Enjoykin was perhaps trying to protect the source. I don't know what the situation is with Aleksei and the websites have been acting up all day yesterday. Lets see how the cookie rolls.
Here's the handdrawn circuit and the screencap. Hope this helps.

Thanks bringdownthezog. If that info is posted on a public website then there shouldn't
be any problem with posting the link.
All the best....

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #8099 on: March 15, 2015, 11:57:39 PM »
  Ruslan has another video out as of March 10.
  I guess this is his version of the Akula video, of the big top hat device. Going for the 5000 watts output?

  https://www.youtube.com/watch?v=RFxIdEe7eJs