Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11717788 times)

Ed morbus

  • Full Member
  • ***
  • Posts: 131
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7890 on: February 05, 2015, 08:11:01 AM »

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7891 on: February 05, 2015, 11:03:51 AM »
watch

https://www.youtube.com/watch?v=QU-wKa74ZpE

hi,

We are slowly getting to understand how this device is working with the aid of nanosecond pulse.At least there are some progress made from the die hard replicators. :D :D :D

Last night i have made further improvement on the existing  nanosecond generator circuit which i was working on.This time it's  around 1.5KV pulse using mere "28volts" DC.
In order to get 2kv and above stick with Max 42volts else current peak will go up with no significant improvement in pulse peak
.

This time i am using "ignition IGBT" strangely only this IGBT model works from the virtual list(The Lowest current model rated at 15Amps).
 

Ed morbus

  • Full Member
  • ***
  • Posts: 131
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7892 on: February 05, 2015, 04:20:24 PM »

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7893 on: February 08, 2015, 04:03:31 PM »
Hi guyz :)

I have finished building my Akula/Ruslan high speed mosfet driver yesterday and it's working! :).
It's actually the circuit which where Akula used for his First device.
Will make a video for demonstration and other vids  for other experiments like the Ruslan setup too when using.
Below I have attached the schema used.

I have also recently seen Akula's Hendershot device, and makes sense how it works, This is now worth while replicating
but his advices are needed.
And also the new Ruslan Vids, very hard to translate everything, but learning from watching as we all are ;)
wish Wesley could Translate them ..

I see Vadim's progress is beautiful, he manages the effect with his Ruslan Setup, and has peak pulses that makes this work.

https://www.youtube.com/watch?v=_Yu6Ms2nXmk

Thanks for posting the vid on forum Ed morbus.


Nick,
Nice vid of your setup :), gives good output man. looking forward to your findings too.

Cheerz

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7894 on: February 08, 2015, 11:48:36 PM »
Hi GeoFusion. Good going mate!
All the best...

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7895 on: February 09, 2015, 11:53:24 PM »
   GeoFusion:
   Thanks for your comments.
   I'm still working on my set up, trying to tune for the best harmonic peeks.  Not easy... But, I'm seeing some interesting effect. There are several harmonics, but I'm not able to tune to the best one, yet. Seams like I need more voltage to kick the system into the higher resonant peeks.  Maybe some better tuning caps might also help.  Anyways, I'm still at it... 
   Good luck with your system. Waiting for your pics and videos.

  Geo, remember that Akula's first device diagram is NOT complete, as it doesn't show the yoke's secondary coil (25 turns, or so), or how to connect that coil to the 310v rectified output from the inverter, or where the other end of that secondary coil is connected to. Looks like the yoke's secondary coil is given a 310v DC pulse from the inverter.
  Kapanadze also used 220v input (from his inverter) to run his circuit. 
 
   I'm still only inputting 12 volts, until I can fix the fet overheating issue. Three chokes on the input doesn't keep the fets running cool, when the load is 300 watts or higher.
 
  Anyways, let us know how it goes with you.

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7896 on: February 10, 2015, 12:48:27 AM »
Hi Guys,  Can somebody tell me why is Ruslan using some 25m (or so) long ground cable?  Wouldn't be more practical to have much shorter length?
Cheers,

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7897 on: February 10, 2015, 01:19:43 AM »
  John:
  The ground cable for the Akula second video device was supposed to be about 37.5 meters long, according to Akula and Ruslan, and, is also the same length as the grenade's output coil with 168 turns.
And the Kacher's HV secondary coil is also wound to about 1/2 of that length, 18.75 meters.

   Ruslan started with a short ground connection to his house radiator, which was about 5 yards away. But, you'll notice that on his newer videos he shows the longer 37.5 meter (or so) ground cable.
  The ground cable in this case, is also a type of antenna, tuned to a certain frequency, and which also becomes part of the whole  tuned circuit.  Or at least, that's the theory, as I understand it.
 

 

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7898 on: February 10, 2015, 11:21:44 AM »
Hi Nick, Thank you for your answer. I just wanted to open the discussion about this "detail"  which might play important role here too. 
Take a look at the experiment with grounding- performed by A. Romanov  : https://www.youtube.com/watch?v=PI1dSZ_dxRM

The aim of the experiment:  We have two coils of different inductance and we want to see where is going the resonant frequency when using ground cable.

Experiment with the 1st coil:   One wire of SG connected to one end of the coil. Ampere-meter with the diode parallel with the coil. He is tuning the frequency to read maximum value on the Amp Meter.  It is resonant frequency of the coil (here 1.8MHz)  Then, he connected the ground cable on the other end of the coil and the resonant frequency dropped to 1.36MHz

Experiment with the 2nd coil:  The same as above, this time the only coil resonant frequency was  1.2 MHz and when grounded, the resonant frequency was 1.36MHZ.

Conclusion-  Two different coils of different parameters when connected to the same ground, they both resonate on the same frequency.

That's interesting.


Cheers.

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7899 on: February 10, 2015, 12:04:09 PM »
Little offtopic but not really...  ;D  In push-pull DC-DC converter there is a choke on output side after diodes or diode bridge and before the output capacitor. What is the purpose of this choke and how to compute minimal inductance of it ? Can it be usefull to convert HV spikes into lower voltage currents ?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7900 on: February 10, 2015, 03:19:37 PM »
  John:
  The guy who has done many tests and experiments to obtain a low powered self runner was Dr. Stiffler. 
He explains the difference between using the "self resonating coil frequencies", compared to what he calls  "SPATIAL ENERGY COHERENCE" factor ,  and,  it's this "spatial resonant coherence frequency that is most important to tune to, and not the coil's own self resonating frequency. 
Check out his PSEC videos on you tube, to understand what he means by that.
https://www.youtube.com/user/StifflerDr

  Akula's tuning methods for his second video device are based on somewhat the same idea.
 
« Last Edit: February 10, 2015, 07:43:32 PM by NickZ »

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7901 on: February 10, 2015, 10:42:44 PM »
Hi Guys,  Can somebody tell me why is Ruslan using some 25m (or so) long ground cable?  Wouldn't be more practical to have much shorter length?

Hi John.K1. Ruslan has said a lot of things. He also has said we need a thick ground wire, but has shown demo videos
with a self runner with not very thick ground wire, or with a fairly short ground wire. Because of this sort of thing,
I do not trust too much of what Ruslan says. It might be helpful, but it also might not make much difference at all. ;)
All the best...

Ed morbus

  • Full Member
  • ***
  • Posts: 131
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7902 on: February 10, 2015, 11:18:35 PM »

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7903 on: February 11, 2015, 01:55:00 AM »
Hi Void. I do not take Ruslan very  seriosly anymore. He sometimes looks quite confused himself ;). The thing is it makes me to think- Romanow shows how the grounding resonate on its own-no matter what coil you connect. If I will get the value of this resonant frequency, I will use the right length of the wire for my granade and tuned signal generator to give the impuls right before or behind the peak of resonating amplitude.

Btw- now I realised my grounded coil also resonates around 1.3MHz -so the length of the ground cable maybe doesn'play the main role? . By the other experimenter, the width of the GND wire has some influence on the size of amplitude.Also, remember ,Kapanadze has used many of thin wires connected to his ground plate.'

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #7904 on: February 11, 2015, 07:59:03 AM »
Hi John.K1. Sure, there might be something to it, but I was just pointing out that Ruslan would say
certain things, and then seemingly do something different in his own video demonstrations. When I go over my
notes of various things Ruslan has said compared to what he showed in his various videos, I really do
wonder what the heck he has really been up to. There are various things that just don't seem to add up with
that guy. :)
All the best...