Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11718892 times)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6390 on: November 03, 2014, 08:04:44 PM »
Yes. Not all toroids making pulses on secondary.

Thanks for your confirmation Mag.

I have found that a 0.22uF cap tunes my inductor to resonance giving 160Vpp at the grenade frequency of 33.3KHz. The inductor will oscillate at the grenade frequency as set by the PWM. Now I need to know the function of the inductor.

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6391 on: November 03, 2014, 08:19:39 PM »
I just measured my 12,12 turn coil for my grenade inductor coil (12v set up), and it is was 16 foot, 5 inches long. I don't have a metric tape measure, I just provide this in measurement in feet, as a comparison. So, if anyone is interested they can just convert it to meters.

That works out to a wire length of about 5 meters Nick.
All the best...

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6392 on: November 03, 2014, 08:20:58 PM »
Now I need to know the function of the inductor.

Indeed, as everyone does. :)
All the best...

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6393 on: November 03, 2014, 09:35:59 PM »
Hi Guyz,

  Geo:
   I watched the video that you posted the link to. What it shows is that the Tesla Bifilar way to wind the 12, 12, or the 25, 25 turn inductor coil on the air core can be made to work, either way.
  The first Akula device just pulsed the yoke's 3 turn coil through the capacitor to  the inductor coil which was wound on top the big air core coil. Similar to the video you posted. This was without the 28 turn air coil, as is used now. But, this way if used by itself, is not a self runner, only an inverter crt, if there is no feed back path.
  The first Akula video used a feed back coil on top of the big air coil, connected to the full bridge rectifier, and filter cap, and then back to the power supply unit, to supply the self running input. Without this is it would also just be another an inverter crt.

 Nick,
Yes, the yoke in first akula device is being pulsed so that the 3wind coil and cap could generate high voltage (kilovots or less) and be in resonance with the inductor for output on air coils. This circuit can drive a Tesla coil also, if you see it as a pulse generator without SparkGap.
The first layer of the air coil functions as a tesla coil but then have to step it down coiling a second layer on it and not the forget the ground
that increases the output and keeps the system running efficiently.
we have seen various of the schematics already on the net.
In any case, in the video you see Meno showing the system work as how its being posted with schematic,
true he ain't feeding the system back (yet) , but showing an  tremendous output with the grenade coil  , Kacher and ground, but lets see how he manages if he still up for posting more vids. It might seem now as a inverter but not a conventional one but this is the way to go,
remember it's using radiant energy using ground.
sharing the info and for our progress on these tech.


 Hoppy, magpwr,
No problem guyz, Here for the help and for progression of replication.
But keep it up, as we see in Meno's recent vid, the Inductor pulses are producing energy in the grenade with the help of ground and
kacher's ground connected to it too, Without the 28 winds of yoke connected.
This show's that this Inductor can be used to excite a Tesla coil, Was drawn by akula some time ago.

Hoppy, now that you have changed to a  0.22uf cap and showing 160Vpp, see if you can light up that 10W bulb. see if there is change.

Meno,
What a surprise to hear it was you in that recent new video with the schematic and yes the inductor should be Tesla Bifilar wound correct.


   To all who are experimenting.
When reaching about 160- 180 V with grenade outputs, try to connect PSU/ stepdown Trafo and see to make it work as what we all are waiting for after tuning and all.
Only thing matters now is to achieve great output from system, maintain High frequency for lower input.

Cheerz

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6394 on: November 03, 2014, 10:07:36 PM »
Hi Itsu!

After winding inductor coil, now you have 2 coils with 2 different resonant frequency, therefore the response at signal generator stimulation will be a combination of the two frequencies. A very nasty business...
For finding new frequency, you may try this:
1. Connect a 0.47uf across your inductor, and put to ground the upper leg of inductor. This will disable the influence of free oscillating of inductor on resonant freq. of grenade.
2. Put your test coil from FG across 6-th layer of your grenade.
3. Put oscilloscope ground to upper leg of grenade, and between scope probe and lower leg put 100k resistor, scope probe set on 10x - for keeping as minimum as possible influence of probe's capacity on resonant freq. of grenade
4. Sweep FG for max. amplitude on oscilloscope. You will find new freq. somewhere between 1.6 - 1.8 MHz. That will be the freq for kacher shutting of.

I hope this will help.

PS: This is just a theoretical speculation of mine, and get as such.


Hi Sky,

i followed your steps, but i find a strong resonance peak on the Grenade at 500KHz, see screenshot.
Using severall other ground points and/or scope points i see different peaks, but no strong / single one around the 1.6 - 1.8MHz range.

Video here:  https://www.youtube.com/watch?v=gMLgvSw-omg&feature=youtu.be   (still uploading.....)

Not sure why my Grenade measures so low, perhaps i should remove 1 layer from the inductor coil.


Regards itsu

MenofFather

  • Hero Member
  • *****
  • Posts: 943
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6395 on: November 03, 2014, 10:16:28 PM »
Itsu, can you scan bifilar inductor in range 0.1-10 megaherc like in image?
Oscilioscope conect were red dots. Inductor lengh can be and 18 meters, but better 11 meters. Inductor can be wounded on multilayer coil or on 5 cm diameter tube, better on tube.
 :)

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6396 on: November 03, 2014, 10:26:47 PM »
Hi Guyz,



 Hoppy, magpwr,
No problem guyz, Here for the help and for progression of replication.
But keep it up, as we see in Meno's recent vid, the Inductor pulses are producing energy in the grenade with the help of ground and
kacher's ground connected to it too, Without the 28 winds of yoke connected.
This show's that this Inductor can be used to excite a Tesla coil, Was drawn by akula some time ago.

Hoppy, now that you have changed to a  0.22uf cap and showing 160Vpp, see if you can light up that 10W bulb. see if there is change.

Cheerz

Hi Geo,

My measurements and experiments are showing that the energy in the inductor is governed by the number of yoke turns and its the grenade that's inducing current in the inductor, not the other way round. In turn, current is being induced into Meno's toroid and the high inductance of the high permeability toroid is causing the pulses we see on the scope. As he says, if a resistor is connected in series with the toroid secondary winding (primary is the single wire passing through the toroid), then a sine-wave is seen on the scope. Therefore, the wave shape is a being affected by the characteristics of the toroid.

I can light the bulb without the inductor in circuit. Its the induced current in the 28 turn winding that's lighting the bulb. The inductor has negligible affect on the bulbs brightness. This is why I'm waiting for an explanation as to the function of the inductor.

Acca

  • Hero Member
  • *****
  • Posts: 563
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6397 on: November 03, 2014, 10:27:31 PM »
 The old Scientist clip showing a tunning of  Earth ground !!!   
 
https://www.youtube.com/watch?v=kKi388Lk1O8
 
 
https://www.youtube.com/watch?v=4kDdvQUcQ-c
 
 
Acca..

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6398 on: November 03, 2014, 10:40:40 PM »

In regards to wire length of grenade coil you need to see on what frequency Earth grounding responds best with different coils before doing calculations. The way to see what is happening is quite simple with frequency sweep generator powered by not grounded power source and test coil attached with one end to the generator and second end to ground. The current probe for spectrum analyzer/scope should be on the ground wire. Then trying different coils you might see on which frequency response is on same peaks and dividing that wavelength by 4 will be your grenade coil wire length.

Cheers!

Hi T-1000,

i tried to follow your suggestion, but where should i put my black return lead of my "not grounded FG"?

Regards Itsu


itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6399 on: November 03, 2014, 10:56:27 PM »
Itsu, can you scan bifilar inductor in range 0.1-10 megaherc like in image?
Oscilioscope conect were red dots. Inductor lengh can be and 18 meters, but better 11 meters. Inductor can be wounded on multilayer coil or on 5 cm diameter tube, better on tube.
 :)

OK, i used my earlier made 11m wire Tesla Bifilar coil on a 5cm OD tube.
I used my 3 turn secondary from my yoke connecting to the series 0.47uF cap and drove this yoke with my FG with 2 turns loosly wrapped around it.

I see a single strong resonance peak around 7MHz

Regards Itsu

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6400 on: November 03, 2014, 10:59:35 PM »
Hi T-1000,
i tried to follow your suggestion, but where should i put my black return lead of my "not grounded FG"?
Regards Itsu

Hi Itsu. In such a case you could leave the ground lead of the FG unconnected.
From my own tests with this, I don't think you will likely come up with
one common frequency testing with different coils. Frequencies where you will see peaks
in the coil and ground wire will depend on resonance points in whichever specific coil you are using.
I personally don't think this is the answer, but it will be interesting to see if you get any much different
results than I did in my tests with this approach. :)
All the best...


itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6401 on: November 03, 2014, 11:05:33 PM »
Hi Void,

i did left it floating, but like you said, 2 different coils show 2 different sweep responses.
But then i realized that i synced my ungrounded FG with my grounded scope (coax cable), so at that time the FG was also grounded  >:(

I agree with you that this is not the way to go.

Regards itsu


Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6402 on: November 03, 2014, 11:06:45 PM »
OK, i used my earlier made 11m wire Tesla Bifilar coil on a 5cm OD tube.
I used my 3 turn secondary from my yoke connecting to the series 0.47uF cap and drove this yoke with my FG with 2 turns loosly wrapped around it.
I see a single strong resonance peak around 7MHz
Regards Itsu

Hi Itsu. That's interesting. Did you have the 11m 'bifilar inductor' wound over a grenade coil?
It may possibly have been the grenade coil that was resonating at that frequency, but maybe it was
the bifilar inductor coil.  At any rate, such resonances do not seem to correspond to how Akula and Ruslan
have explained things, but you just never know at this point. ;)
Whether it has any real significance or not, 7MHz / 4 = 1.75 MHz.  It's definitely interesting anyway.

P.S.  So you have the series resonance of that loop at 32 KHz or whatever you are tuned to, and at the same time
another resonance in the same loop at a little over 7 MHz.  That has me thinking......    hmm...  Maybe it
is something to do with these sort of dual resonances that we are aiming for? Akula wondered about this
himself in a comment on one of his schematics. I don't know if this is the right line of thinking or not though...

All the best...

John.K1

  • Hero Member
  • *****
  • Posts: 679
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6403 on: November 03, 2014, 11:09:51 PM »
Check List:

Granade coil :  DONE
Katcher:  DONE (+ grounded emitter o transistor)
Tuning antenna to Granade coil ( 1.85MHz considering speed of electrons in copper 96 % of speed o light):  DONE
Pre- check -Light 220V 20W one end on grenade coil:  PASSED  (light lit a bit)
TV choke : READY-wound
Push-Pull: Awaiting parts 

So far I do not see any difference as I used completely different diameters of wires and three layers of inductor. May-be problems will rise later on :) 




Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #6404 on: November 03, 2014, 11:13:39 PM »
Check List:
Granade coil :  DONE
Katcher:  DONE (+ grounded emitter o transistor)
Tuning antenna to Granade coil ( 1.85MHz considering speed of electrons in copper 96 % of speed o light):  DONE
Pre- check -Light 220V 20W one end on grenade coil:  PASSED  (light lit a bit)
TV choke : READY-wound
Push-Pull: Awaiting parts 
So far I do not see any difference as I used completely different diameters of wires and three layers of inductor. May-be problems will rise later on :)

Looks like you are making good progress John.
All the best...