Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11719896 times)

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5730 on: October 11, 2014, 11:11:15 PM »
Hi there all

Some Vasmus updates, this will also let you see that power comes from ground , using the amp clamp and see the amps flow.
removing the ground kills the circuit as how Ruslan does in one of the latest vids. ;) some hints guyz.

Vasmus11
https://www.youtube.com/watch?v=g-aCBelO_0c#t=578


2nd part
https://www.youtube.com/watch?v=ub71Ea5ppio#t=22


Remember when you connect a ground pin to earth and use a one phase to ground you will have some power.
that is why the ruslan/akula device needs ground.
There are some of akula that don't need ground but the ground is needed as it feeds and somehow returns too.


Enjoykin

  • Sr. Member
  • ****
  • Posts: 269
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5731 on: October 12, 2014, 12:53:37 AM »
Anapa More

Сборка установки серия 3
http://www.youtube.com/watch?v=hg-hob78rgA

Намотка качера, и размещение на доске всех компонентов
Первое включение и проверка частоты ТТ, Частота не совпала с резонансом "Гранаты" нужно настраивать, в моем случае сматывать вторичку и переделать первичку.

d3x0r

  • Hero Member
  • *****
  • Posts: 1433
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5732 on: October 13, 2014, 05:45:09 AM »
https://www.youtube.com/watch?v=lTwq_EbYy7U


at the end he's talking about resonance... of the cuff coil and the kacher... but what about this "grenade" coil?
He makes a accurate description of how to wind and measurements of his... incliding inductance around 240-250 uH


need to find some kinda russian sesame street :)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5733 on: October 13, 2014, 07:00:27 AM »
 
  Thanks for the link to Ruslan's new video showing the grenade winding set up.

  I don't see the two final layers of 12, 12 turns in the video, on the end of the 48,48, 24,24, 12,12 turns that are shown in the Kapanadze coil diagram. So, I think that he just uses the first 4 layers, (48,48, 24, 24, without the last two layers of 12,12 turns.
  His smaller (resonator) coil on the grenade is not wound with 25, 25 turns, but possibly 12, 12 turns, instead.  Or, possibly 25, 12, 12, turns or so.
  What do you think...

  I've finished my "grenade" coil, and will proceed to connect it up to the 20 plus turns secondary coil of the yoke.
  The 12,12 turn resonator air coil will be connected to the yoke 3 turn coil.
 And the Kacher, ferrite rod, and antenna will be connect up, as well.

joel321

  • Hero Member
  • *****
  • Posts: 953
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5734 on: October 13, 2014, 08:21:38 AM »
https://www.youtube.com/watch?v=ub71Ea5ppio#t=22

Mostly all coils...I even saw a coil coming out of a coil connected to the air.

I don't believe in magic (you power those capacitors with a 9v battery that powered the coils...), but this is very well shown it is mostly true.

In the end when you mangled up all, nice....

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5735 on: October 13, 2014, 09:20:36 AM »
 
  Thanks for the link to Ruslan's new video showing the grenade winding set up.

  I don't see the two final layers of 12, 12 turns in the video, on the end of the 48,48, 24,24, 12,12 turns that are shown in the Kapanadze coil diagram. So, I think that he just uses the first 4 layers, (48,48, 24, 24, without the last two layers of 12,12 turns.
  His smaller (resonator) coil on the grenade is not wound with 25, 25 turns, but possibly 12, 12 turns, instead.  Or, possibly 25, 12, 12, turns or so.
  What do you think...

  I've finished my "grenade" coil, and will proceed to connect it up to the 20 plus turns secondary coil of the yoke.
  The 12,12 turn resonator air coil will be connected to the yoke 3 turn coil.
 And the Kacher, ferrite rod, and antenna will be connect up, as well.


Nick,


On the second coil (grey pipe) shown, I make it 60, 60 - 30, 30 - 15,15.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5736 on: October 13, 2014, 10:34:13 AM »
I have re-posted my PWM waveforms as taken across C/E of my IGBT's. The waveforms shown in my previous post 5705 were incorrect as a result of a fault in my circuit build. Also, the code for the varistor shown should have read: B7221….., not BZ221…… Thanks to Itsu for pointing this out this error.


A shot of my IGBT's with diode clamp and snubber components is shown below. The IN5401 diodes have now been replaced with ultra fast diodes - STTH12R06DIRG.

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5737 on: October 13, 2014, 10:43:11 AM »

Nick,


On the second coil (grey pipe) shown, I make it 60, 60 - 30, 30 - 15,15.

Right, i agree, the 2 x 12 turns (or 15) is clearly visible, not sure why Nick says its missing.

More to notice is that the both coils (brown and blue/red/white) are oppositely wound.

Brown is: 2x48 CCW, 2x24  CW, 2x12 CW  while
other is: 2x48 CW?, 2x24 CCW, 2x12 CCW

I guess it does not matter really, but also, notice that the white coil on the Blue/red/white coil is 1x20t CCW,
meaning the same way as the 2x24 and 2x12 turns.

Regards itsu

itsu

  • Hero Member
  • *****
  • Posts: 1845
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5738 on: October 13, 2014, 11:08:57 AM »
I have re-posted my PWM waveforms as taken across C/E of my IGBT's. The waveforms shown in my previous post 5705 were incorrect as a result of a fault in my circuit build. Also, the code for the varistor shown should have read: B7221….., not BZ221…… Thanks to Itsu for pointing this out this error.


A shot of my IGBT's with diode clamp and snubber components is shown below. The IN5401 diodes have now been replaced with ultra fast diodes - STTH12R06DIRG.

Nice squares, but nasty spikes.
Also no dead time?   Did you use the TL494, and if so did you hook up pin 3 via the 3.3K to ground and/or pin 5 via 1nF to ground?

Regards Itsu

starcruiser

  • Hero Member
  • *****
  • Posts: 693
    • Starcruiser's Place
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5739 on: October 13, 2014, 03:07:21 PM »
Remember the coils length is governed by Wavelength, i.e. what is the harmonic you are shooting for? Tune the length of the wire to that or a harmonic of that. Thus if the coil looks like it has a different length that is because he is tuning the "grenade" coil to match the output of the HV pulse section (transmitter). the air core coils are not inductive as you think of them as a transformer per se' but like an antenna.

IMO the matching of the coils/antennas will be the challenge for most.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5740 on: October 13, 2014, 05:16:27 PM »
Nice squares, but nasty spikes.
Also no dead time?   Did you use the TL494, and if so did you hook up pin 3 via the 3.3K to ground and/or pin 5 via 1nF to ground?

Regards Itsu


I could not get the TL494 I was using to work in the exact configuration shown. I have the 1nF to ground for frequency. Yes a nice beefy front end spike limited by the diode clamp / varistor. The waveform was taken with a 56R 25W resistor across the yoke secondary, getting very hot!


My nano-pulser is now tested and working and I will shortly be looking into the 'P' mosfet problem.


Regards
Hoppy

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5741 on: October 13, 2014, 05:21:28 PM »
  Itsu:
  " the 2 x 12 turns (or 15) is clearly visible, not sure why Nick says its missing"

   I'm pointing out that on the red, white, and blue coil on that grenade, (the white wire) on the resonator coil. That coil, there should be two layers of 12, 12 turns, not just a single layer of 20 turns.
  Looks like Ruslan is experimenting on finding the best turn ratios, by building different air coils to try out, instead of adding or removing turns, on the same grenade.
  If he gets them working (both grenades), this might mean that the turns ration may not be that critical, and that possibly the wiring scheme may be more important.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5742 on: October 13, 2014, 06:02:55 PM »
  Itsu:
  " the 2 x 12 turns (or 15) is clearly visible, not sure why Nick says its missing"

   I'm pointing out that on the red, white, and blue coil on that grenade, (the white wire) on the resonator coil. That coil, there should be two layers of 12, 12 turns, not just a single layer of 20 turns.
  Looks like Ruslan is experimenting on finding the best turn ratios, by building different air coils to try out, instead of adding or removing turns, on the same grenade.
  If he gets them working (both grenades), this might mean that the turns ration may not be that critical, and that possibly the wiring scheme may be more important.


Nick,


Why are you saying it should be two layers of 12, 12 turns and not 20 turns?

GeoFusion

  • Sr. Member
  • ****
  • Posts: 449
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5743 on: October 13, 2014, 06:19:06 PM »
Hi there guyz.

Thought I should start showing my windings of the generator too.
#1 layer 50~60 winds
#2 layer 48 winds
#3 layer 25 winds
#4 layer 24 winds
#5 layer ~13 winds
#6 layer 12 winds

2.5mm² stranded wire.
Inductor is also 2.5mm² but not shown here, removed it , wanted a better better winding. but is around 20~ to 25 winds 2x .

Will be uploading for some detailed specifications of the coiling.
 
  cheerz~

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #5744 on: October 13, 2014, 06:22:08 PM »
Hi there guyz.

Thought I should start showing my windings of the generator too.
#1 layer 50~60 winds
#2 layer 48 winds
#3 layer 25 winds
#4 layer 24 winds
#5 layer ~13 winds
#6 layer 12 winds

2.5mm² stranded wire.
Inductor is also 2.5mm² but not shown here, removed it , wanted a better better winding. but is around 20~ to 25 winds 2x .

Will be uploading for some detailed specifications of the coiling.
 
  cheerz~


Nice grenade build Geo. Its good to see that you are also shooting for a self-runner.  ;)