Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11717896 times)

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22530 on: October 06, 2020, 04:14:06 PM »
Hi, Soliman

Thanks for your choke information but this 10mH choke is for those who have a controllable catcher. 10mH choke is not good for those who have a normal katcher like me or NikZ. Normal Katcher is made with 2SC5200 and no mos-fet and is not a controllable one. A Katcher like Soliman's is  very powerfull it gives 5 to 7Kv on anttena, normal Katcher give 2-4Kv on anttena.

I only have 160V on load with normal katcher and not 240V like Soliman.

You see Kapanadze's 5Kw system has a small spark-gap and the 100Kw system has a huge spark-gap.

I think that my system as well as the system of NickZ and others are good, only we need is 5-7Kv on the antenna.

I forgot Soliman, if the length of the Tesla secondary is 20m, you must also have the ground wire 20m too.

Hi there
you can have a high voltage (whatever)
but not having interaction with the earth.
I want to be here, that one thing is very different from the other.
When you approaches a screwdriver to the antenna of the kacher
You can see that only the high voltage comes out but with a low sound.
but when you It interacts with the earth, it emits a loud sound, like a strong wind.
this is the difference.
high voltage anyone can get it, but interaction with the ground
It has been very difficult for me. until now.
I have already recovered my interaction with the earth.
I am evaluating from 1.6H, 900mH, 500mH and I go down until I find the maximum point.
let's be good workers, doing different things
we will have different results, but not doing the same.


Blessings.

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22531 on: October 06, 2020, 04:28:28 PM »
   On 24v, my Kacher can have a 1cm streamer, (10.000v). But, I find that that much HV can damage things, so I use only about a 4 or 6mm streamer, instead.
   The choke that I use on the front of my Kacher's input source was one that I wound myself. So, I'm not sure now just what specs it may have. But, the idea is to protect the mosfet, from overcurrent, by the use of this choke.   I already have interaction with the earth ground line (37m long going into my water well in my back yard), when the rest of the device is in tune and in sync. The 37.5 m long thick ground line, is the same size as my grenade. But, still no OU.  So,  I don't get too excited, just because the ground line helps to light up the bulbs up a bit higher. Until 100w input = 1000w output.   
   The size of the kacher secondary is not 20m. It is tuned on my device to resonate at 1.5MHz, yet it runs best at around 1MHz.
   Now we've got Jeg, apecore, and some of the other old timers back, again.  Nice.
   I still miss itsu not being here, even though I always follow his work, elsewhere 
   It's unfortunate the problems that trolls and other problematic people have caused to some of our original hero members here.

    NickZ

NickZ
you have high sound in the spark?
and high current in the ground wire?
can you tell me how many amperes are in the ground wire?.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22532 on: October 07, 2020, 02:39:40 PM »
   Soliman: 
   The Kacher's streamer (spark) makes no sound, by itself. The interaction with the induction circuits is what produces the ringing sound.   I don't know and have not tested for "high current in the ground line". It will light a bulb. But, I don't expect to see any current being drawn in by the earth ground line. Nor do I believe that the ground, is a source of energy. But, is an energy sink, instead.
Although there is some energy to be found in most everything, but only a volt or two, with hardly no current.

   I had tuned my Kacher's output to produce the highest gain, as seen by the scope on the ground line, or on the induction circuit's 3 turn coil, shown in my last video, below. Which had been a tuning test recommended to try by T-1000.   
   My last video:
   https://youtu.be/9UxOvZatzKY
   NickZ

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22533 on: October 07, 2020, 03:08:26 PM »
   Soliman: 
   The Kacher's streamer (spark) makes no sound, by itself. The interaction with the induction circuits is what produces the ringing sound.   I don't know and have not tested for "high current in the ground line".
For a katcher to make sound to the ground it needs to be powered ON only on the moment when both MOSFETs on yoke are OFF. It is narrow time window where you can tune katcher on/off cycles. This will make similar thing as singing Tesla coils do (see their circuits to get idea of FM modulation).


As for current transformer after re-watching video I did not see both scope leads attached across resistor. It needs both. Or there is thin wire which is not seen by camera? Also the current transformer placement needs to be on the ground wire outside of board (inside you just measure current of series LC circuit with Tesla+grenade capacitance).

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22534 on: October 07, 2020, 03:24:33 PM »
    NO T-1000.    If both scope leads are connected, there will be a short circuit of the HV pulse through to the scopes negative ground line.    When the HV circuit (Kacher) is connected to the induction circuit, if a scope is connected to any part of the circuits, with BOTH of it's test leads, it will short out the HV outputs (skin effect), to ground. So, that is how I get around that issue, by using just the positive lead of the scope. It may not be totally as accurate, but works better than nothing at all, and seams to work like that, to some use able degree. And that is the only way to test the output of the HV directly, by using just the positive probe a few inches away from the antenna coil.
   I have also done the test using current transformer that is on the ground on outside of the board, as well. But, I get better results using the CT that is on the 3t coil.   I can partially light a 100w bulb, using just the Kacher's output. So, of course there is going to be some current and voltage on the earth ground line, when the Kacher is on. This does not mean that there is current being drawn in from the ground. But, that there is current going TO the ground, from the Kacher, instead.
   
   NickZ

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22535 on: October 07, 2020, 03:30:25 PM »
    NO T-1000.    If both scope leads are connected, there will be a short circuit of the HV pulse through to the scopes negative ground line.
For the current transformer you can still connect one lead to the ground wire on the edge of the board. This should help with problems you are getting. Or use 2nd scope. In the best case scenario I would run them on UPS unit battery mode to isolate from mains ground line.



P.S> Why CT outside the board - you need to use ground current to amplify output of grenade. Which is extra energy coming into open circuit. I do not see any other external energy input source in this case.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22536 on: October 07, 2020, 03:51:26 PM »
  Perhaps, however, the single positive scope lead seems to work pretty well, when using just the one lead by itself for these tests. I have been using that system on this device for a while now. Otherwise, you are killing the HV to ground, instead of going to the output side.
  I want to keep things as simple as possible. And, I do connect the negative scope lead up at times, just to see and compare if the is any difference, but there is none that I can see. Other than shorting out the effect of the HV pulses.
   Any of the self running type circuits that use a HV pulse will be affected by a scope connection,  being connected to the AC ground. And OU devices may also be affected by portable type scopes being connected up, as well. That I have not tested, but other guys have.  This can make these types of devices very hard to test for true OU, and is why self running is the ONLY way to go.   I don't see Ruslan's or Akula's devices making any sound at all, ever.

   NickZ
   PS.  Why one of the two test CT is outside the board?
   It is just outside of the board, mounted on the earth ground line.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22537 on: October 07, 2020, 05:26:39 PM »
For a katcher to make sound to the ground it needs to be powered ON only on the moment when both MOSFETs on yoke are OFF. It is narrow time window where you can tune katcher on/off cycles. This will make similar thing as singing Tesla coils do (see their circuits to get idea of FM modulation).


As for current transformer after re-watching video I did not see both scope leads attached across resistor. It needs both. Or there is thin wire which is not seen by camera? Also the current transformer placement needs to be on the ground wire outside of board (inside you just measure current of series LC circuit with Tesla+grenade capacitance).
I'm sorrey but Nick I have got to smile !  ;D

But I to would like #Nick to get his de vice going I really would!
Good luck !
AG

PS Nick I watched your film clip 'interesting' the yellow trace looks as if it's modulated by a low frequency
if you turn the time base frequency down you should be able to see what it is, perhaps a mains hum
earth loop or missing earth, any way good luck hope you have success in the near future.

AG
« Last Edit: October 07, 2020, 10:10:24 PM by AlienGrey »

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22538 on: October 07, 2020, 11:15:24 PM »
For a katcher to make sound to the ground it needs to be powered ON only on the moment when both MOSFETs on yoke are OFF. It is narrow time window where you can tune katcher on/off cycles. This will make similar thing as singing Tesla coils do (see their circuits to get idea of FM modulation).


As for current transformer after re-watching video I did not see both scope leads attached across resistor. It needs both. Or there is thin wire which is not seen by camera? Also the current transformer placement needs to be on the ground wire outside of board (inside you just measure current of series LC circuit with Tesla+grenade capacitance).
No,
check the geo videos again.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22539 on: October 08, 2020, 08:51:53 AM »
Hi Nick
Thanks for sharing your video.
What is the frequency of the signal which is seen at your oscilloscope? Is it the high frequency of your katcher module? Or is it the low frequency of your system?

ps (later added). Is your Kacher modulated? Without modulation just forget any progress. Is it at least in sync with your push pull? A continues Katcher operation with out timed brakes will lead you nowhere. Any advice from folks here will not help at all in such a case.   

Regards
« Last Edit: October 08, 2020, 12:27:37 PM by Jeg »

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22540 on: October 08, 2020, 02:58:07 PM »
Yes Jed some Russian speaking guy sent me this !
Translated it says

Secrets of the TL494 or half twisted guys in the Shark flashlight.
« Last Edit: October 08, 2020, 07:33:24 PM by AlienGrey »

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22541 on: October 09, 2020, 04:07:29 AM »
Hi Nick
Thanks for sharing your video.
What is the frequency of the signal which is seen at your oscilloscope? Is it the high frequency of your katcher module? Or is it the low frequency of your system?

ps (later added). Is your Kacher modulated? Without modulation just forget any progress. Is it at least in sync with your push pull? A continues Katcher operation with out timed brakes will lead you nowhere. Any advice from folks here will not help at all in such a case.   

Regards

   Hello Jeg:   There have been several replication now showing no real OU with any of the controlable, or nor controlable Kacher circuits, along with the rest of the yoke/grenade circuits. Even though now Adrian which showed the simple kacher circuit self runner, is now dead.
   So, when Geo, yourself or any others guys can show how well the controlable Kacher works to self run, we can all replicate and get ahead in this project. But, until then, it just looks like we are all just still chasing wild turkeys. And Geo, is still lost in space, again.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22542 on: October 09, 2020, 02:13:48 PM »
Yes Jed some Russian speaking guy sent me this !
Translated it says

Secrets of the TL494 or half twisted guys in the Shark flashlight.

Thanks AG. I had posted again this waveform at least twice in here. I had also asked this guy how its made. Here is the dialog: https://www.youtube.com/watch?v=0bBTqA6opUY&list=LL&index=39

"Thank you  for sharing. At 10:17 there this high frequency waveform. On which point inside the circuit we look for this? Jeg"

"Высокочастотный сигнал генерит ТЛ494. Паузы между ними делают усилители ошибки по параметру степени насыщения феррита. По сути тут два генератора первый на внутреннем генераторе 494, а второй параметрический зависящей от силы тока протекающего через L1 снимаемый на шунте R1."

Google trans: "The high-frequency signal is generated by TL494. The pauses between them make the amplifiers errors in the parameter of the degree of ferrite saturation. In fact, there are two generators, the first on the internal generator 494, and the second parametric depending on the current flowing through L1, removed on the shunt R1"

Regards


AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22543 on: October 09, 2020, 04:26:58 PM »
Jeg I'm not into the Device as such I wasted time enough on that as a green novice retro bate a good few years ago now.

I got the modulation wave form as that's what is needed to pass energy from the katcher oscillator to the grenade
but it still wont work as it is not a more in than out device (Electron accelerator) so no point in making any further this way.

Dr Steven Grier has said many times solve that problem and you solve the anti gravity problem till then fun and games or do other thing that's been left, perhaps play with old relay coils to see what back emf is like.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #22544 on: October 09, 2020, 04:36:59 PM »
Hi Nick
Thanks for sharing your video.
What is the frequency of the signal which is seen at your oscilloscope? Is it the high frequency of your katcher module? Or is it the low frequency of your system?

ps (later added). Is your Kacher modulated? Without modulation just forget any progress. Is it at least in sync with your push pull? A continues Katcher operation with out timed brakes will lead you nowhere. Any advice from folks here will not help at all in such a case.   

Regards

   Jeg:  That was the HF/HV kacher signal, as read by the HV scope probe, with no negative ground probes attached, at round 900KHz, or so. The point being was to tune the HV/HF signal and frequency to interact with the induction circuits.  As you can see in the video, there is some interaction, but not enough, at that time. Yet it can partially light 3 200w bulbs.
However, I see no improvements over that output, by the other shown controlable kacher circuits, as yet. And so I've been waiting for you or apecore or Geo, to show me how well your controlable circuit works to self run.  And, I'm still waiting...
   NickZ