Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11688557 times)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21330 on: May 30, 2019, 07:11:06 AM »
Hi all.
what I want to say here, in relation to akula seting is:
For example: we have two resonant frequencies one is at 14kHz and the other is at 28kz. Approximately we are going to make a walk through the range of frequency from 10khz to 40khz. all right.
We started at 10khz. as we go up to the resonance of the 14khz. You will begin to add the peak voltage, while the peak voltage is 28 kHz. It will be very attenuated.
but it will be in phase with each other.
we continue to be in fracuency, we pass over the resonance and now the resonant 28khz will begin to rise in voltage.
at a certain moment it suddenly changes phase to 180 degrees. At this point, go back slightly, and you will find something very similar to 90 degrees in phase.
I have been able to prove that at this point "Radio Moscow"
It is more censible than it is other frequency ranges.

I could find that there are other resonant frequencies
in or near this range.
Hi Soliman  could you please say what the waveform is please, where it is that your scope probes are connected to,
and thank you so much for sharing your time with us AG

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21331 on: May 30, 2019, 07:32:55 AM »
Hmm, why suddenly all other ideas are thrown into mix at once...?Can you guys just test 1 thing at a time? ;)
Arunus hi, yes indeed I have a grenade setup i need to test out soliman's suggestions I can get a 90 phase shift
and before that i had various resonant points i could set up with capacitors i could move but nothing else.

I also had a look at ?Ismail's 3 videos and noticed a similarity with the IVO Nelson device spooky! it would look as if a
simple Katcher sine wave pulsed might as he suggests might work. But haven't had the time as noticed after visiting Lithuania guy's 'FreeEnergyLT'
 site.
My system started saying 'recycling' a system control files ! so had to reformat HD and start again from scratch as couldn't repair system.
Such is life. So be aware.

AG

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21332 on: May 30, 2019, 03:57:52 PM »
Hi all.
what I want to say here, in relation to akula seting is:
For example: we have two resonant frequencies one is at 14kHz and the other is at 28kz. Approximately we are going to make a walk through the range of frequency from 10khz to 40khz. all right.
We started at 10khz. as we go up to the resonance of the 14khz. You will begin to add the peak voltage, while the peak voltage is 28 kHz. It will be very attenuated.
but it will be in phase with each other.
we continue to be in fracuency, we pass over the resonance and now the resonant 28khz will begin to rise in voltage.
at a certain moment it suddenly changes phase to 180 degrees. At this point, go back slightly, and you will find something very similar to 90 degrees in phase.
I have been able to prove that at this point "Radio Moscow"
It is more censible than it is other frequency ranges.

I could find that there are other resonant frequencies
in or near this range.

   soliman:  I notice that the voltages are really low. Do you notice a rise in voltage at 19KHz. Do you have caps on the C! and C2, and no other connection to the rectifier or feed back circuit? So you found no rise in voltage at the 15KHz and 30KHz, as Ruslan mentioned? My best frequency is running at 22.6KHz, or so.

   T-1000:  I have made the CT for the ground test. Will be doing that test later today, along with testing the current and frequency points, along with the voltages on the 3t coil circuit, as well.   I am focused on this circuit, and no other circuit or device, for now.

soliman

  • Jr. Member
  • **
  • Posts: 76
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21333 on: May 30, 2019, 04:28:19 PM »
Hi Soliman  could you please say what the waveform is please, where it is that your scope probes are connected to,
and thank you so much for sharing your time with us AG



pic_107_5.png is on 0 degree.
pic_99_1.png in on 90 degree.
pic_93_2.png in on 180 degree.


I am connect on C1 and C2


[font=]Cheers![/font]

Utopia Now

  • Full Member
  • ***
  • Posts: 100
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21334 on: May 31, 2019, 10:08:44 AM »
Hallo WhatIsIt
 Thanks for the link to the Kapanadze interviews translated by Wesley ( Stivep1 ) http://www.magistrala.cz/freeenergy/2011/01/09/kapanadze-my-comment-known-as-translation-part-1-video-16/

Thanks for the suggestion of "Can you do it without capacitor and inductor with design of coils? That will be automatic resonance of shifting phases of each coil to produce one output phase aligned. (about Kapanadze question style resonance...)"
And I know you suggested "automatic ..  but still I  remebered a video not with automatic but with cap and coil which I found interesting.

It made me think about Fabrice André 1,7 kW unit . In the video he says : "here we see very good the current that arrives on this little apparatus, Voila, that allows us to afterwards adjust very simple on a capa(citor) the resonance from the coil L1 and L2"     https://www.youtube.com/watch?v=KNyqMIe997s#t=157
His little apparatus is a variable inductor  and is in series with the 2 small capa citors.

And interesting Power .. voltage and current 0 degree ..  I still have to read more about "power factor corection and phase shift" . Thank you.

I think you are right WhatIsIt  ..  we can make our own idea, version, schematic, device
Combine all the working principals   and  construct .......

What are the required ingrediënts for a working device ..

The picture is from the video and the other picture is from pdf from Fabrice André where he talks about automatic resonance ( he writes: "you have to find a way that L1 and L2 are at automatic resonance" )

T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21335 on: May 31, 2019, 11:23:44 AM »
The picture is from the video and the other picture is from pdf from Fabrice André where he talks about automatic resonance ( he writes: "you have to find a way that L1 and L2 are at automatic resonance" )
Thanks for translated pic.

Yet again it is talking about charges from Earth ground in resonance coupled as capacitor plate.
Not sure if there was anyone testing that. And it is another reason to see what can be done with Earth cable with making max current going through it.

Cheers!

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21336 on: May 31, 2019, 05:24:59 PM »

Yet again it is talking about charges from Earth ground in resonance coupled as capacitor plate.


If? Just if? , the big coil in Kapanadze device is capacitor (I think it is), can be similar process involved?

That Kapanadze capacitor has probably small value of capacitance, but big surface which can influence the whole coil.
If it is energized with HV pulses, the field of that capacitor can be strong (this is questionable). Question is how much it can influence coil?

And if that capacitor is small capacitance it wont need to much energy to drive it.

I will try to make one, just to see how it behaves and influence coil, and most important how strong that field of capacitor can be at HV.
Probably will fail, but I will try. I am interested in Kapanadze because I believe he is genuine.


Just a thought!

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21337 on: May 31, 2019, 07:52:37 PM »
Thanks for the suggestion of "Can you do it without capacitor and inductor with design of coils? That will be automatic resonance of shifting phases of each coil to produce one output phase aligned. (about Kapanadze question style resonance...)"
And I know you suggested "automatic ..  but still I  remebered a video not with automatic but with cap and coil which I found interesting.

If you dig into current and voltage phases, reactive power and power factor correction methods you will learn a lot about power and how to manipulate it.
And you will benefit on that.

If you have transformer with primary and secondary different inductances will there be phase shift or some other kind of differences?
If you have auto transformer, can it have that same phase shift? Or it will be different.?
Both can do the same job.
In first case coils are separated. Primary and secondary have to resonate or whatever?.
In second case you have one coil which does not have to resonate. It is one coil. Or you can call it auto resonance, because there is no need for resonance between primary and secondary.
And one coil is also inductor. So we can say that auto transformer is inductor also.

But, I don't want to go deep in subject. I tried only to show some small differences in type of design. So, yes, with design you can do things without capacitors and inductors.

Quote
What are the required ingrediënts for a working device ..

When you look at Kapanadze device, what you see? Not much. Coil (auto transformer??), capacitor...
So, all ingredients we already have. We just have to connect them properly. So major ingredient is our mind. We have to think.
I am not the smart guy, I do experiments and tests. Don't have the answers. Trying just as others do.
But I am not trying to build someone others methods like Akula or, you name it.

I do believe Kapanadze is genuine, that is why I am looking at his design, construct. For others, I don't know. They did it, that's for sure. But I don't have intention to decipher what they did and waste time on that. I am trying to make my own conclusions and then I test them.

Hope I helped, if not don't blame me.

Cheers! And I wish you luck!

WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21338 on: June 01, 2019, 05:36:47 PM »
I just looked at Kapanadze patent.

Everything looking nice, but something caught my attention.
The way he connected his coils?
Is it transformer or auto transformer?. Because that connection between winding's?
And part number 2, can it be that big coil which I think is capacitor?

Or is it just his way to fool the reader?
Or it is nothing?

Any thoughts?

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21339 on: June 02, 2019, 11:39:28 AM »
Yes my thoughts are your post is OFF TOPIC !
would you please create your own thread OR look in the directory and
Select an aproprialte KAPINAZE thread and post this stuff else where,
No offence intended but it's cluttering up this thread and if you bothered to search back
IN THIS THREAD I bet you would find this same post at least TEN TIMES.
----------------------

Posted Soliman's drawing might be of help on this page for connecting or hooking up.


« Last Edit: June 02, 2019, 02:57:02 PM by AlienGrey »

magpwr

  • Hero Member
  • *****
  • Posts: 1168
    • Youtube Channel
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21340 on: June 02, 2019, 03:21:11 PM »
Hi everyone,
Active clamping for IGBT using suitable TVS diode,diode and resistor.CAN be applied for any other PWM project as well.Page 2,3,4.
----------------

Remove the possibility of damaged IGBT or Mosfets.If applied.


WhatIsIt

  • Hero Member
  • *****
  • Posts: 651
    • At The End It Will Matter!
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21341 on: June 02, 2019, 09:27:52 PM »
Yes my thoughts are your post is OFF TOPIC !
would you please create your own thread OR look in the directory and
Select an aproprialte KAPINAZE thread and post this stuff else where,
No offence intended but it's cluttering up this thread and if you bothered to search back
IN THIS THREAD I bet you would find this same post at least TEN TIMES.
----------------------

Posted Soliman's drawing might be of help on this page for connecting or hooking up.

The thread name is Kapanadze Cousin - DALLY FREE ENERGY, so I posted question about Kapanadze.
I see now that I was wrong as you pointed. This thread is not about Kapanadze?

Ok, I have wish to involve in Soliman's device. I do.
You posted Soliman's drawing and that's it.
Do you have any comment or suggestion?

Why is important to phase shift for 180 deg?
What kind of connection is between F2 and F3?
Upper picture has different kind of connection, is the picture on bottom same thing?

Cheers!
 

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21342 on: June 02, 2019, 11:00:04 PM »
The thread name is Kapanadze Cousin - DALLY FREE ENERGY, so I posted question about Kapanadze.
I see now that I was wrong as you pointed. This thread is not about Kapanadze?

Ok, I have wish to involve in Soliman's device. I do.
You posted Soliman's drawing and that's it.
Do you have any comment or suggestion?

Why is important to phase shift for 180 deg?
What kind of connection is between F2 and F3?
Upper picture has different kind of connection, is the picture on bottom same thing?

Cheers!
if you go back a few pages you will find posts on both your questions, and no Soliman's info is confusing ask him  ;D >:(
I'm not all that bothered as experimenting With L and C will half or double the frequency its an easy amateur radio way of down or up tuning.
PS i sent you the 'post your asking about.

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21343 on: June 03, 2019, 12:38:03 AM »
  Here's a video that I haven't seen, or at least remember.
  Is his device supposed to be a self runner?
    https://youtu.be/YMX_-Y0r1fU
   T-1000:  Concerning the CT for the ground. The highest voltage I can get on a 1 1/4 inch torroid with about 33 winds,  on the ground line, is about 50v. It appears to be running at the same of similar frequency as the induction circuits, both of which are at 22.6KHz. Which is the highest output voltage and frequency point, the way that my device is tuned at the moment.
    I'm having a hard time trying to figure what's going on with all this. If I connect the scope ground up it messes with the readings,
so I have to leave it disconnected. Sometimes it works that way, but not really.
   So, it's been hard to know what's going on so far.   I do see a phase shift at times, but providing no added juice along with it.
   So, I'm still wondering what's up with the "phase shift" idea, and why we need it.   Let me know if you see anything interesting in the linked video above  Any obvious relays, etz...

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21344 on: June 03, 2019, 01:34:21 AM »
   Is his device supposed to be a self runner?
    https://youtu.be/YMX_-Y0r1fU   .
No it is not.
It is some  guy who  made  the  device  based  on  instruction  and schematics  of Stalker
He is working on it in his  new place he  moved to.
========================================
Friendly advice:
Dear WhatIsIt.
Very experienced  and  quite consolidated crowd don't want to get back in time again  and again.
All or most of that what you are interested with  was hundreds times posted, discussed, and commented.
It is unfortunate but:
knowledge of  past events  in FE
knowledge of  previous  art in FE
  is  just expected to be a  base  for discussion.
Everyone can  be scrutinized including me . You are  not  different.   

Wesley