Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11689113 times)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21075 on: April 19, 2019, 05:37:34 PM »
Hi Nick.
During the last years i have built a number of mosfet switches of all the kinds. But as a habit i used to use tc4420 as a driver for all of my builds. Unfortunately it is not suited for high speed applications and so i am limited to about a 1MHz of maximum freqyency. After speaking with AG, i 'll go for the UCCxxxx type like Russians do.
I hope it will do the job.  ;)

ps. If you didn't understand i am trying to avoid Kacher. I prefer a more controlled environment. ;)

   Jeg:  I guess that I did not understand about what you're trying to do, by avoiding a Kacher circuit. 
What do you consider a more controlled environment?
   As I mentioned, Itsu and I have had not trouble getting the below diagram working in the right frequency range for the induction circuit.
   While the Kacher circuit uses a 2SC5200 transistor. Any Kacher frequency over about 3MHz will not work well for the HV circuit.
   
   I use the same TC4420 driver, and the recommended IRFP260P. It was used by Ruslan, Stalker, Adrian, Itsu and myself.
It works just fine from 13.5KHz on up, to way over what we need it for, as is. And, this range can also be adjusted to further go up, or down, in it's running frequency, if needed.
   This (below), is the driver circuit that was shown self running by Ruslan, and by some of the others guys, at around 15KHz, or so.   Perhaps I've missed your point.
   Or, are you just looking for a suitable HV circuit, if your induction circuit is working ok?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21076 on: April 19, 2019, 06:07:33 PM »
  Jeg: 
   If a controllable Kacher circuit is what you are looking for, below is the Stalker version. It is a 3 mosfet circuit, feeding a 2sc5200 transistor, with drivers that may suit your needs. His video explains most everything in detail.   
   The second diagram is actually the first part of that circuit, and the first diagram is the second part of the circuit. Sorry about the order that I posted them.   Notice the DC to DC converter that he uses on his Kacher's input.

Jeg

  • Hero Member
  • *****
  • Posts: 1532
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21077 on: April 19, 2019, 08:14:43 PM »
  Jeg: 
   If a controllable Kacher circuit is what you are looking for, below is the Stalker version.

Thank you Nick. I'll watch it soon. Yes I am trying to make the hv stage..again! All the other stuff are in place. The yellow waveform in previous page is across my in series capacitor.. We'll see. ;)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21078 on: April 20, 2019, 12:26:39 AM »
watch what's happening in this video !!!  8) 8) 8) 8) 8) 8) 8) 8)

https://www.youtube.com/watch?v=cQWLP6k-c7I

seychelles

  • Hero Member
  • *****
  • Posts: 991
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21079 on: April 20, 2019, 06:20:24 AM »
WAVE AMPLIFICATIONS DUE TO THE IN PHASE RETURNING WAVES.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21080 on: April 20, 2019, 09:11:45 AM »
like this, there is a lot going on in this motion in order to simulate it accurately

Sergh

  • Hero Member
  • *****
  • Posts: 581
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21081 on: April 22, 2019, 02:05:41 PM »
(Attention! Very deep) (Not suitable for people who are only looking for videos on YouTube)

Who is Gocha (full name: George) Tabatadze?
Long ago on the site www.matri-x.ru was the following message:

Quote
27.12.2010, from user: Birom:

Good afternoon, ladies and gentlemen. Stumbled upon your forum. And I was very surprised that it mentioned the installation of my late friend Gochi Tabatadze. I have only once mentioned its existence on the specialized forum of electronics "Kazus" and then I saw his name on your forum.
Indeed, Gocha assembled a generator with output parameters of 220 volts, 50 hertz and a peak power of 8 kilowatts. This installation was tested at the Kutaisi Aviation Plant, where it worked as a drive to the injection fan for about three days continuously and in fact there it was installed its peak power - with a load of 8 Kv, the output transformer and electronic control began to get very hot. It has nothing to do with the installation of Tariel, since it was made according to another scheme, has no grounding, nor any arresters, and a standard toroidal transformer with a 220 volt output is used in it. For more than half a year this generator was the main source of electricity in his apartment and his own apartment, and then the entire district of Tbilisi was disconnected from the grid. About this event spoke Tarieel in his interview. Gocha did and the generator is similar to that shown by Tariel Kapanadze - with two earths, but I did not see there any discharger. Two transformers were present in the device and one ground wire ran off from each. It was two independent circuits and they had to be grounded, but not at one point. After I saw the video of Kapanadze, I asked Gocha if he saw him. I received the answer: I saw not only Tariela, but also my cousin - I won't let him on my doorstep after that.
As for the principle of obtaining energy - you are not looking there. Still in the textbook on TOE Bessonov there is a topic "trigger effect with feroresonance". It does not matter whether the resonance is current or voltage, it is important that this is a power jump and you need to supply metered power sufficient for a jump, but only the “extra” power will be provided to you - remove it, it is yours. According to this, Tesla did so much and did with resonant systems, and even nowadays hydrodynamics have a resonant energy storage device “hydrotaran” and it uses the same trigger effect, but only in a wave of water flow.
Thank you for your site in a good way the name of my friend is mentioned.

    In the collection of scientific articles of the University of physics (Tbilisi), I found a couple of articles that were probably written by Gocha Tabatadze.The first article describes a long induction coil, which is used to determine the resistance of a metal melt inside, in a mold. The second article is very difficult for my understanding.

Annotations to these articles:

1. SOME REMARKS FOR NON-CONTACT METHOD OF MEASUREMENTS OF A RESISTIVITY
Assoc. prof. A.A. Kapanadze, Senior teacher G.D. Tabatadze, Tbilisi, Georgian Technical University. While measurements of a resistivity by non-contact method even when the measured loop is solitary it is  necessary  to  degree  it.  It  means  checking  the  different  functional  dependences  and  its  multiple comparing.with the standard.

2. V.D. Meladze, G.D. Tabatadze. Corpuscular-Wave Duality of the Matter
In presented work the famous Louie de Broglie’s hypothesis about the corpuscular-wave duality of the matter is  deeply  studied  using  rather  complicated  mathematical  supply.  Expressions  for  the  phase  as  well,  as  for  the  group velocities of de Broglie’s wave, related to the energy and the momentum of micro-particles, are written down. Besides that, the phase velocity is presented as  ht e function of the velocity of a micro-particle and speed of light. The definite example of electrons flux is considered.

Link to sources:

http://gtu.ge/Journals/newsletters/jurnali_N_2_17.pdf

http://gtu.ge/Journals/newsletters/jurnal_iN_11.pdf

Organization:   Georgian Technical University:

http://gtu.ge/Eng/

Link to message:

http://matri-x.ru/forum/index.php/topic/971-%d1%83%d1%81%d1%82%d0%b0%d0%bd%d0%be%d0%b2%d0%ba%d0%b0-%d1%82%d0%b0%d1%80%d0%b8%d0%b5%d0%bb%d1%8f-%d0%ba%d0%b0%d0%bf%d0%b0%d0%bd%d0%b0%d0%b4%d0%b7%d0%b5/page__st__12080#entry94312

Sergh

  • Hero Member
  • *****
  • Posts: 581
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21082 on: April 23, 2019, 10:45:42 AM »
The file with first article was not correct, from another autor.

I translated the first article of Tabatadze with a Google translator and corrected the inaccuracies that I noticed. In addition, the original in Russian was added.
1. SOME REMARKS FOR NON-CONTACT METHOD OF MEASUREMENTS OF A RESISTIVITY
« Last Edit: April 23, 2019, 03:07:16 PM by Sergh »

TechBuff

  • Newbie
  • *
  • Posts: 1
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21083 on: April 23, 2019, 06:56:54 PM »
NASA is using nanomaterials to harvest electricity from atmospheric ions. Looks like they plan to use it for Mars colonies and on up to 10 planets and moons as a power source. No overunity here, just very cool energy harvesting       https://ionpowergroup.com

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21084 on: April 28, 2019, 06:17:34 PM »
   It's interesting that Tabatadze did not continue with the self running project, as Kapanadze has done.   I always wondered just where Tariel got his original information from, concerning self running type of devices, and his electronics abilities and know how. Perhaps Tabatadze is one of his sources.
Which makes me wonder where Tabatadze got his information from, as well.  Who is behind all this... and where are they hiding now?

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21085 on: April 28, 2019, 09:21:45 PM »
   It's interesting that Tabatadze did not continue with the self-running project, as Kapanadze has done.   I always wondered just where Tariel got his original information from, concerning the self-running type of devices, and his electronics abilities and know how. Perhaps Tabatadze is one of his sources.
Which makes me wonder where Tabatadze got his information from, as well.  Who is behind all this... and where are they hiding now?
Who is Tabatadze? and it was T. Kapanadze, not   A.A. Kapanadze, Senior teacher G.D. Tabatadze!
It was Tesla who started it all off them Henry Moray, don't forget Moray had all of Tesla's paperwork and access to his patients and one big thing he was still alive Testa back then that would have been a big asset.
If you have a working device whats so hard in feeding some back to the supply, even you could accomplish that, couldn't you? ;) ;)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21086 on: April 28, 2019, 09:39:22 PM »
.
« Last Edit: April 29, 2019, 09:25:05 AM by AlienGrey »

Void

  • Hero Member
  • *****
  • Posts: 2333
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21087 on: April 29, 2019, 08:21:37 PM »
Sergh, that is very interesting about those university professors "A.A. Kapanadze" and "G.D. Tabatadze". 
Whether it is the same G. Tabatadze or not is hard to say, but it seems pretty much for certain
that Tariel Kapanadze got the technical information on how to make his devices from someone/somewhere
else. :)


T-1000

  • Hero Member
  • *****
  • Posts: 1738
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21088 on: May 02, 2019, 03:25:09 PM »
Hi all,

New video from Ruslan - https://youtu.be/CKh-Z5tFHmI

Even it is long one he did not say straight what is core principles of generator.

Only few mentioned things which cause more questions:
1) Why the sudden high voltage appear on wire on moment of power disconnection?
2) Why there are cracking sounds on HV wires in that moment?
3) Why the skin effect is essential for power generation?
4) Why the whole thing works similar to combustion engine?
5) Why emision is part of essential principal of generator?

Cheers!

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #21089 on: May 02, 2019, 04:16:16 PM »
   T-1000:    At least Ruslan is still at it, although I can't tell if his current design is going to be any better than his 4000w model.   I don't understand most of what he is saying, nor can we see what may be the results once he finishes the build.  I wonder is Oleg is still working for him, again. In any case we'll have to wait and see what this latest build has to offer, if there is going to be anything new or improved.

   I got my new voltage regulator installed for the push pull circuit (finally), and got my set up working as it was previously. 
Now to see what I can do with it, other that deco art for my work bench.
   Jeg:  How are you making out???
   Apecore, Geo, Itsu,  what's new and exciting?  Common guys, if Ruslan can do it,  we can too. 
Or are we going to let all the negative BS make us lose our way?