Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 11803248 times)

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19140 on: March 01, 2018, 05:35:15 PM »
Getting back to this device (Akula / Ruslan) device in particular, I was following a radio video live recording play back  ;D ;D ant way I was kind of hoping the he was going to show his device instead of just talking about it  ;D any way he didn't to cut a long story short he was saying with that type of device you need a transmitter to create a 180 deg phase shift I think T1000 was saying this a while back but no one took him up on it. Also wasn't Don smith saying the same thing a good while back in one of his vids ?

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19141 on: March 01, 2018, 09:43:36 PM »
Is that the protection diode in the PSU? If so, the Peak inverse voltage (PIV) rating is likely not high enough to prevent HV spiking on your supply line possibly damaging your PSU. Those cheapo Chinese PSU's are commonly sold for LED lighting applications, so are not designed to power devices that generate high voltages.

 
  Hoppy:
    The additional protection diode is on the positive 24v terminal or rail.  Not inside the power supply.
I'll try some blue ceramic HV caps like AG suggested. I suppose that they connect up between the positive and negative rails? I still have not been able to eliminate the unwanted pulsing when the feedback power supply is also connected up.
   
   
   
   

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19142 on: March 01, 2018, 11:35:34 PM »
 
  Hoppy:
    The additional protection diode is on the positive 24v terminal or rail.  Not inside the power supply.
I'll try some blue ceramic HV caps like AG suggested. I suppose that they connect up between the positive and negative rails? I still have not been able to eliminate the unwanted pulsing when the feedback power supply is also connected up.
   

Nick,

As discussed in previous posts, the best protection is with the use of transorb (TVS) diode with a voltage clamping rating above the power rail voltage.

http://www.littelfuse.com/~/media/electronics/product_catalogs/littelfuse_tvs_diode_catalog.pdf.pdf

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19143 on: March 02, 2018, 08:03:33 AM »
 
  Hoppy:
    The additional protection diode is on the positive 24v terminal or rail.  Not inside the power supply.
I'll try some blue ceramic HV caps like AG suggested. I suppose that they connect up between the positive and negative rails? I still have not been able to eliminate the unwanted pulsing when the feedback power supply is also connected up.   
   
Hoppy I have some Here 16 volt ones shall I poke Nick a couple down the modem to him as it takes six weeks before he gets any thing, but great for bills  ;D  PS weather is a bit bad here almost arctic conditions, where is the FE sorry alternative energy ?

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19144 on: March 02, 2018, 09:35:18 AM »
Hoppy I have some Here 16 volt ones shall I poke Nick a couple down the modem to him as it takes six weeks before he gets any thing, but great for bills  ;D  PS weather is a bit bad here almost arctic conditions, where is the FE sorry alternative energy ?

Hi Alien,

Yep bit taters here! Emma has poked the beast right up the arse!! A couple of those in series should fit the bill.

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19145 on: March 02, 2018, 10:04:55 AM »
I think I might have some thing here a caducious coil, wound with a 3rd input winding of 6 to 8 winds of 18guage it gives 2 outputs out of phase with strange currents in each wind it also has a collection of ferrite internal rings about 20 of them base 8 hex 403250, you would have to build your own and plug and play. Any way I'm starting to lose interest  8) 8)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19146 on: March 02, 2018, 03:33:15 PM »
Hi Alien,

Yep bit taters here! Emma has poked the beast right up the arse!! A couple of those in series should fit the bill.


  A bit taters, huh...  Nice and warm here, though.

  I'm going to change some of the caps on the input on the yoke center tap. To see if that makes any difference. I'm more worried about the up and down blinking of the bulbs, when the feed back circuit is on. And it also limits the tuning of the TL board to just one spot on the TL frequency controller pot. Otherwise the feed back PS does not power up, from lack of input to it. It only power up if it gets the proper amount of juice to it. Which only happens when the device is in it's best resonant mode.
And NO Where else. At least on my unit.
   Also I think that some bigger uf caps are needed at the input that will store some of the energy when the device is turned off. With a switch at that point so they won't drain, and will retain the charge to jump start the device, without a battery. Although using a battery to jump start the device, is probably cheaper than buying expensive high uf caps.
  Ruslan is able to start his last devices with just a small 9v battery. So, it doesn't take that much to start the device, when everything is working right.

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19147 on: March 02, 2018, 05:19:17 PM »

  Ruslan is able to start his last devices with just a small 9v battery. So, it doesn't take that much to start the device, when everything is working right.

You could start your device with a 9V battery if you had a latching circuit like used by Ruslan. ;)

NickZ

  • Hero Member
  • *****
  • Posts: 5225
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19148 on: March 02, 2018, 05:31:34 PM »
   What do you mean by a "latching circuit"? Used where?
Stalker uses 4700uf cap at the yoke input. And a 2uf cap
 
  I've replaced the input caps to the yoke center tap.  Will test the results now.

apecore

  • Guest
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19149 on: March 02, 2018, 06:00:46 PM »
You could start your device with a 9V battery if you had a latching circuit like used by Ruslan. ;)


I m almost there....  little bit more efficiency to improve..

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19150 on: March 02, 2018, 06:25:14 PM »

I m almost there....  little bit more efficiency to improve..
are you using a pulse driven katcher ?

Hoppy

  • Hero Member
  • *****
  • Posts: 4135
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19151 on: March 02, 2018, 09:45:15 PM »
   What do you mean by a "latching circuit"? Used where?


Nick,

This is the basic circuit also used by Kapanadze to start his devices using a 9V battery. One relay contact set latches the relay. The other set switches the device on, which stays on once the 9V battery is removed. The NO latch switch would be replaced with the 9V battery.

SolarLab

  • Hero Member
  • *****
  • Posts: 975
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19152 on: March 03, 2018, 06:35:04 PM »
F.Y.I.

*** For those following the Ruslan, Kapanadze design have a look
at the first video under Examples below; note the S-Parameter window
(upper right) and observe the signal (S11 = reflective)! Scale the frequencies...

The "antenna" part resembles the Tesla coil "Antenna" end - no conventional
current - it's open circuit... high voltage pulses... electrophoretics! ***

** this post was submitted to another thread re: scalar discussion **

Transverse waves versus Longitudinal waves:
https://montalk.net/notes/transverse-longitudinal-waves

Note the "V" (pulse?) versus "Sinusoidal" (alternating?). Also, if your
an RF type, consider Near Field vs Far Field.

Transformation of Traversal waves into Longitudinal waves (magnetic):
http://gorchilin.com/articles/free/magnetic_P?lang=en

Don't confuse "Scalar" with "Longitudinal"...


Scalar Physics Research Center:
http://scalarphysics.com/

Example(s) - Why bother trying to understand all this?


(Videos) Helical Antenna (or any helical structure - coil - for that matter):
https://www.youtube.com/watch?v=prQ8ZjYiUSw

Electric field of a Helical Antenna in 3D
https://www.youtube.com/watch?v=vgR2YcVB6pI
https://www.youtube.com/watch?v=bByO4XQtOKc
https://www.youtube.com/watch?v=2x2Rw32Wf4Y

A look at some math might help a bit:
http://scalarphysics.com/resources/thomas_minderle/thomas_minderle-a_brief_introduction_to_scalar_physics.pdf

FIN

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19153 on: March 03, 2018, 07:00:49 PM »
F.Y.I.

*** For those following the Ruslan, Kapanadze design have a look
at the first video under Examples below; note the S-Parameter window
(upper right) and observe the signal (S11 = reflective)! Scale the frequencies...

The "antenna" part resembles the Tesla coil "Antenna" end - no conventional
current - it's open circuit... high voltage pulses... electrophoretics! ***

** this post was submitted to another thread re: scalar discussion **

Transverse waves versus Longitudinal waves:
https://montalk.net/notes/transverse-longitudinal-waves

Note the "V" (pulse?) versus "Sinusoidal" (alternating?). Also, if your
an RF type, consider Near Field vs Far Field.


I did not read yet the rest of your post but here I have objections:
Is see the material  in this link  not only esoteric but  conflicting with  known science.

If longitudinal electromagnetic wave was such as described  in the article why wasn't  yet utilized by communication?
If longitudinal  electromagnetic wave was  in existence why it was not conformed by science?

So major conflict of this article is lack of fundamental basis.
By that from scientific point of view it is bunch of scientifically conformed physical phenomena wrongly applied and that makes this particular article   piece of trash or intentional action to  create wrong  conclusions and wrong basis for these not skilled in art.
So far the most frequent activity in disinformation  on this forum was provided by Russian Trolls, most of them  have been terminated from here.

As everything is relative this post remains valid till is proven wrong. Till now there was only
Eric Dollard & Thomas Brown 1988 - Transverse & Longitudinal Electricity who where trying to  prove its existence , the rest of other guys They  are just fascinated individuals with an idea of "Longitudinal"  electromagnetic waves.
https://www.youtube.com/watch?v=LwFWx5RkwDE
They did not  provide sufficient lead to an army of researchers around the  world to be able to conform it  till today.
As far  as VNA and S parameter   - I have plenty of VNA's in my lab and nothing strange I have found in this area at all.

With respect

Wesley
 
« Last Edit: March 03, 2018, 09:18:43 PM by stivep »

stivep

  • Hero Member
  • *****
  • Posts: 3567
Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #19154 on: March 03, 2018, 07:22:48 PM »
https://www.youtube.com/watch?v=vgR2YcVB6pI
This is valid representation for circularly polarized  electromagnetic wave coming out of  helical antenna  in Near field only https://en.wikipedia.org/wiki/Near_and_far_field
 This video does not demonstrate  wave propagation in Far field ''

https://www.youtube.com/watch?v=bByO4XQtOKc
https://www.youtube.com/watch?v=2x2Rw32Wf4Y
Both of the links from above represent  valid representation for circularly polarized  electromagnetic  properties of electromagnetic wave in Near field only.

=====================================================================================
The article:
http://scalarphysics.com/resources/thomas_minderle/thomas_minderle-a_brief_introduction_to_scalar_physics.pdf

along with yet another one included here by me:
https://arxiv.org/ftp/physics/papers/0002/0002028.pdf
are in direct conflict with  official science.
Here is article that you may take for given.
https://www.quora.com/How-are-gravity-and-electromagnetism-related

Quote
To the best of our (present-day) knowledge, no special relationship exists between gravity and electromagnetism,
above and beyond the fact that gravity couples universally to everything, and electromagnetism is no exception.

Shortly after general relativity was developed, there have been several attempts to unify these two classical fields,
gravity and electromagnetism, into a single theoretical framework. A few worth mentioning are the five-dimensional spacetime of
Kaluza and Klein; Weyl's attempt to treat the metric and the electromagnetic 4-vector (or, as he called them, the quadratic and linear ground-forms)
on the same footing as describing the fundamental geometry of spacetime; and, last but not least of course,
Einstein's own attempt to derive a unified field theory from a non-symmetric metric tensor, splitting it into a symmetric part (gravity) and a non-symmetric part
(corresponding to the electromagnetic field tensor). None of these attempts were successful.

Meanwhile, particle physicists discovered new particles and new forces, which eventually found their place in the theoretical framework that
we now know as the standard model of particle physics, which integrates three of the four fundamental forces (specifically, it unifies electromagnetism
and the weak nuclear interaction into the non-Abelian gauge theory of the electroweak interaction). Gravity, meanwhile, serves as a background,
which couples to all fields universally and minimally, but without singling out any specific component of the standard model, be it electromagnetism or something else.

This of course is not the final word, since the relationship between the (classical) theory of gravity and the standard model's (quantum) theory
 of fields is uneasy at best. If/when an improved theory is found that treats gravity and other fields on the same foundations, perhaps there will be
 new relationships uncovered. But that's speculation. What I described above is what we presently know.


Wesley