Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11810283 times)

AlienGrey · « **Reply #16635 on:** February 07, 2017, 01:43:22 PM »

Quote from: bitbo on February 06, 2017, 05:39:04 PM

Hi apecore !

Are you able and willing to share the corresponding circuit ?

Thanks in advance
bitbo

PS: I also had a "grenade measurement weekend" with some results on winding ratio behaviors
(not yet written down completely to share)

An interesting statement and request. However if you connect inject a signal generator to the secondary winding of your Grenade coil what are the pass frequency's your device will allow onto the multi layer primary ??

Regards AG

T-1000 · « **Reply #16636 on:** February 07, 2017, 02:25:36 PM »

Quote from: AlienGrey on February 07, 2017, 01:43:22 PM

An interesting statement and request. However if you connect inject a signal generator to the secondary winding of your Grenade coil what are the pass frequency's your device will allow onto the multi layer primary ??

Regards AG

Hi,

The current focus on my side is to actually make Tesla coil charge environment. Then calculate grenade coil to that exact condition to receive signal.

As you know already, the reaching of sync effect and parametric LC resonances do not convert ambient energy.
In my theory, the make of the current are magnetic field and electric field which are always following electric current. So assembling these fields on proper relationship should induce current on the wire. Which basically is the amplification of the energy in the system. The magnetic current is given on grenade from inductor and the electric current and static charges from the environment which the Tesla coil is conditioning. Still lots of experiments to do on that side but it may lead to ambient energy conversion results which could exceed power on the output than required battery power on the input. The time will tell how much truth is in that...

Cheers!

NickZ · « **Reply #16637 on:** February 07, 2017, 02:45:07 PM »

T-1000:
Sounds like your spark gap idea that you got from Akula has not produced a self runner.
There is a reason that no one is using that method now. Which can cause the bulbs to flicker, also.

T-1000 · « **Reply #16638 on:** February 07, 2017, 03:15:00 PM »

Quote from: NickZ on February 07, 2017, 02:45:07 PM

T-1000:
Sounds like your spark gap idea that you got from Akula has not produced a self runner.
There is a reason that no one is using that method now. Which can cause the bulbs to flicker, also.

The spark gap is not being used. The electronic circuit with Tesla interrupter is instead.
But the whole idea is also in akula spark gap circuit for more easy reading.

Cheers!

apecore · « **Reply #16639 on:** February 07, 2017, 03:42:25 PM »

Quote from: T-1000 on February 07, 2017, 03:15:00 PM

The spark gap is not being used. The electronic circuit with Tesla interrupter is instead.
But the whole idea is also in akula spark gap circuit for more easy reading.

Cheers!

T1000,
That is right.....but maybe we jave to consider that a spark gap generates a complete frequenty spectrum.
Would this spectrum also be emitted by the antenna?
If so is the type of grenade in relation to fres(kacher/tesla) important?
Does that make the grenade design less critical
Cheers

Ps. Bitbo....i need to confirm your request with MIB.

T-1000 · « **Reply #16640 on:** February 07, 2017, 03:47:47 PM »

Quote from: apecore on February 07, 2017, 03:42:25 PM

T1000,
That is right.....but maybe we jave to consider that a spark gap generates a complete frequenty spectrum.
Would this spectrum also be emitted by the antenna?
If so is the type of grenade in relation to fres(kacher/tesla) important?
Does that make the grenade design less critical

According to akula the receiving grenade is made to match exact conditions made by the Tesla coil. Which are the frequency and voltage on the Tesla coil causing ambient charging effect when the Tesla coil is switched off with interrupter.

apecore · « **Reply #16641 on:** February 07, 2017, 03:56:41 PM »

Quote from: T-1000 on February 07, 2017, 03:47:47 PM

According to akula the receiving grenade is made to match exact conditions made by the Tesla coil. Which are the frequency and voltage on the Tesla coil causing ambient charging effect when the Tesla coil is switched off with interrupter.

Yes i do understand.

But in terms of physics......would that be correct as i posted previous?

T-1000 · « **Reply #16642 on:** February 07, 2017, 04:04:09 PM »

Quote from: apecore on February 07, 2017, 03:56:41 PM

Yes i do understand.

But in terms of physics......would that be correct as i posted previous?

When doing with spark gap - it still need to be modulated and interrupted. Which is being shown in akula's spark gap circuit.
Also the spark gap is making frequency spectrum all at once and may hit the key points for the ambient charging effect on Tesla but result may be weaker when comparing to the precise given frequency.
The relationships are critical between Tesla coil , receiving grenade and magnetic field on grenade. Which unfortunately do not make our jobs more easy..

Cheers!

SolarLab · « **Reply #16643 on:** February 07, 2017, 05:05:54 PM »

F.Y.I.

Combining several recently posted "information sources" might assist in
an increased understanding of the concept of FE - CE, BTG, over-unity
(call it what you will). These are postulations presented by their authors but
their theories, IMHO, are quite viable and the empirical references tend to
bare this out.

- http://gorchilin.com/articles/?lang=en the entire site, including Calculations,
and, in particular, these two papers:

- http://gorchilin.com/articles/free/magnetic?lang=en parts 1, 2 and 3;

- http://gorchilin.com/articles/energy/pull?lang=en

- Vasiliev's book (see post #16635 or #16636 in this thread); the entire book,
but in particular Chapters 12 and 19.
http://overunity.com/12736/kapanadze-cousin-dally-free-energy/dlattach/attach/162249/

I repeat these resources again since this valuable information may
have been missed or overlooked...

The rewards will be well worth the time you spend reading and
comprehending the concepts presented!

I could simply regurgitate simplified portions of the material here but that would, in my
opinion, be counter productive and likely quite confusing. The authors have done a much
better job in detailing their assertions than I could do in a piece meal fashion on this thread.

Have a productive day and all the best...

FIN

AlienGrey · « **Reply #16644 on:** February 07, 2017, 06:59:54 PM »

Quote from: T-1000 on February 07, 2017, 04:04:09 PM

When doing with spark gap - it still need to be modulated and interrupted. Which is being shown in akula's spark gap circuit.
Also the spark gap is making frequency spectrum all at once and may hit the key points for the ambient charging effect on Tesla but result may be weaker when comparing to the precise given frequency.
The relationships are critical between Tesla coil , receiving grenade and magnetic field on grenade. Which unfortunately do not make our jobs more easy..

Cheers!

Well what's next then, ? Ok I have a test set up here destine for the bin before long

but lets go over it's statistics first ok. a tesla coil of 10 and 20 m with a tap and a sec of 12t tapped at 1.2 turns. A grenade with windings of 10m +10m and 5m +5m +2.5+2.5 m ans a secondary of 10m.

If i run it as is I can just light a red led

and the Tesla coil is pulsed on que ! electronically. There must be another way than keep rewinding have you tried using 'c' on the grenade output coil, and just tapping the Tesla sec at various points ?

saturnio · « **Reply #16645 on:** February 09, 2017, 04:09:02 AM »

Hi guys! I am relatively new to this.

Maybe you can identify if it's a new video.

It seems to be close to making it work, right?

https://www.youtube.com/watch?v=k0rp1Sjkt2M

https://www.youtube.com/playlist?list=PLhG1WObRU5PyxFcRio-c1Taoky3WAoEus

zalmoxis · « **Reply #16646 on:** February 09, 2017, 08:57:42 PM »

I'm back with some oscilloscope images ..
yellow & light blue - pushpull
blue - tesla triggering.

I have some windings updates ..
*tesla primary & tesla secondary (0,9 mm diameter; 19 meters ling) CCW
*Antenna i used CCW ALUMINIUM wire
*grenade coil 1&2 layer CCW , 3,4,5,6 CW
*inductor CUT from 19meters to 9.5 meters !!! why ?!
because using 19 meters + resonant capacitor (330nF + 330nF + 470nF = 1,130uF) the maximum output from the toroidal transformer was only around 78Volts with 75Watt bulb at ~12kHz!!
with 9.5 meter inductor i use (330nF + 330nF) and i have a full brightness BULB with 160Volt at 23,5kHz
Inductor or 9.5 meters 20 windings x 2 layers CCW

the other output from transformer is connected to the upper wire exiting the inductor and then connected to ground.

Till now i didn't get 200Volt output ...
using 2 BULBs 50Watt + 75Watt .. the light drops ... like 20-30%
The inductor becomes extremely HOT!!
Playing with tesla frequency/nano pulser sync etc ... i get no drop on Amps ... and no increase in voltage ..

any more suggestions ?!
Thanks!

x_name41 · « **Reply #16647 on:** February 09, 2017, 09:01:40 PM »

hello, in Bulgaria already sell a superconductor of a godless price, see here: http://www.bezplatno.bg/obiava/193954/сверхпроводник--втсп---ybco--е-без-ел--съпротивление.html

for more info: http://www.fujikura.co.uk/products/energy-and-environment/2g-ybco-high-tempurature-superconductors/#!prettyPhoto

lost_bro · « **Reply #16648 on:** February 09, 2017, 10:53:47 PM »

Quote from: zalmoxis on February 09, 2017, 08:57:42 PM

I'm back with some oscilloscope images ..
yellow & light blue - pushpull
blue - tesla triggering.

I have some windings updates ..
*tesla primary & tesla secondary (0,9 mm diameter; 19 meters ling) CCW
*Antenna i used CCW ALUMINIUM wire
*grenade coil 1&2 layer CCW , 3,4,5,6 CW
*inductor CUT from 19meters to 9.5 meters !!! why ?!
because using 19 meters + resonant capacitor (330nF + 330nF + 470nF = 1,130uF) the maximum output from the toroidal transformer was only around 78Volts with 75Watt bulb at ~12kHz!!
with 9.5 meter inductor i use (330nF + 330nF) and i have a full brightness BULB with 160Volt at 23,5kHz
Inductor or 9.5 meters 20 windings x 2 layers CCW

the other output from transformer is connected to the upper wire exiting the inductor and then connected to ground.

Till now i didn't get 200Volt output ...
using 2 BULBs 50Watt + 75Watt .. the light drops ... like 20-30%
The inductor becomes extremely HOT!!
Playing with tesla frequency/nano pulser sync etc ... i get no drop on Amps ... and no increase in voltage ..

any more suggestions ?!
Thanks!

Good day Zalmoxis

Is there a reason you are triggering the Karcher output during the Push_Pull transistor Deadtime?

Push_Pull Deadtime equates to Zero voltage crossing or approx. 90 degrees off from where it should be *if* you are trying to pulse the Karcher @ TDC (apex) of the Current Waveform.

Ie; the Current waveform is approx. 90 degrees out of phase from the Voltage waveform, not 180 degrees out of phase as the Zero Voltage Crossing would have it.

Nice pictures.....

take care, peace
lost_bro

zalmoxis · « **Reply #16649 on:** February 10, 2017, 12:26:49 AM »

Quote from: lost_bro on February 09, 2017, 10:53:47 PM

Good day Zalmoxis

Is there a reason you are triggering the Karcher output during the Push_Pull transistor Deadtime?

Push_Pull Deadtime equates to Zero voltage crossing or approx. 90 degrees off from where it should be *if* you are trying to pulse the Karcher @ TDC (apex) of the Current Waveform.

Ie; the Current waveform is approx. 90 degrees out of phase the the Voltage waveform, not 180 degrees out of phase as the Zero Voltage Crossing would have it.

Nice pictures.....

take care, peace
lost_bro

Yes,the waveform after the capacitor who connects the inductor there is where i have the highest peak around 140 Volt if i power pushpul with 12 volt, and around 260V if i power push pull at 24Volt.
When the tesla pulse hits the peak of the inductor wave i have a drop on amps from 2.4 Amps to 2.2Amps

Now i have another problem ... if i power the pushpull at 24volt ... the 160Volt zener diode between ground and drain gets too hot .. i have around 176-180volt on the zenner.

Another interesting thing one bulb connected 3,3Amps , 2 bulbs connected in parallel 2 Amps .. and the light intensity drops.
I have some chinese 30Amp meters ... of course they are chinese .. the shunt is missing

)

News:

User Menu

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11810283 times)

AlienGrey

Re: Kapanadze Cousin - DALLY FREE ENERGY

T-1000

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

T-1000

Re: Kapanadze Cousin - DALLY FREE ENERGY

apecore

Re: Kapanadze Cousin - DALLY FREE ENERGY

T-1000

Re: Kapanadze Cousin - DALLY FREE ENERGY

apecore

Re: Kapanadze Cousin - DALLY FREE ENERGY

T-1000

Re: Kapanadze Cousin - DALLY FREE ENERGY

SolarLab

Re: Kapanadze Cousin - DALLY FREE ENERGY

AlienGrey

Re: Kapanadze Cousin - DALLY FREE ENERGY

saturnio

Re: Kapanadze Cousin - DALLY FREE ENERGY

zalmoxis

Re: Kapanadze Cousin - DALLY FREE ENERGY

x_name41

Re: Kapanadze Cousin - DALLY FREE ENERGY

lost_bro

Re: Kapanadze Cousin - DALLY FREE ENERGY

zalmoxis

Re: Kapanadze Cousin - DALLY FREE ENERGY