Language:
To browser these website, it's necessary to store cookies on your computer.
The cookies contain no personal information, they are required for program control.
the storage of cookies while browsing this website, on Login and Register.
 Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here: https://overunity.com/5553/privacy-policy/If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

Custom Search

### Author Topic: Kapanadze Cousin - DALLY FREE ENERGY  (Read 10771884 times)

#### Stela

• Newbie
• Posts: 46
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14445 on: July 02, 2016, 04:20:39 PM »

Find resonance frequency Tesla Coil (FRENCH)
Little tutorial on how to find the fundamental resonant frequency of his Tesla coil.

#### MenofFather

• Hero Member
• Posts: 943
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14446 on: July 02, 2016, 06:09:46 PM »

#### AlienGrey

• Hero Member
• Posts: 3604
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14447 on: July 02, 2016, 10:45:25 PM »
AlienGrey:
It's not what you learned about in school.  As each self runner is running at a different frequency.
No two self runner are working at the SAME frequency, yet they all work,  (IF true).
I think that it's the relation of the two frequencies that's important, as there doesn't seam to be single magic frequency to tune to.
I suppose that what is being called "dancing", means vibrating, at the right frequency match.
Even on Poma's simple kacher circuit device, there are two frequencies, "dancing".  And that's the rub.

1/. we had a wire going down the length of the long classroom with wires connected to small bulbs every so often and when the right frequency was hit they would all come on.

2/.True apparently but I wouldn't be so quick as Tesla found some frequencies better than others where he found peeks ant troughs in power and also the same in healing and darker energies when tested on plants (borderline Technologies) the late Bob Beck's research.

AG
« Last Edit: July 03, 2016, 09:38:07 AM by AlienGrey »

#### NickZ

• Hero Member
• Posts: 5169
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14448 on: July 03, 2016, 03:27:25 PM »
What Tesla found was that different frequencies produce different effects, such as the wide white streams of Aether, which would light up the room. The purpose of the TL494 is to adjust the two coil to work together to provide for the best output. The frequency bandwidth is tiny, so it's easy to miss.
We already know at what frequency our devices should be running at, according to just how long the grenade's output coil is, 37.5 to 40m long.
The inductor should be matched to the output coil, and the Kacher matched as well. Some how it doesn't seam to work out that way, for us. Or at least for Itsu, and others that have tried to tune their device in that way. All that Ruslan does is to turn the TL494 pots.
I don't know just how he figures and tunes the Kacher's matching frequency though. If we knew the Kacher's secondary coil size, it might help to tune in on what frequency it's suppose to work at.

#### John.K1

• Hero Member
• Posts: 679
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14449 on: July 03, 2016, 10:46:55 PM »
I don't know just how he figures and tunes the Kacher's matching frequency though. If we knew the Kacher's secondary coil size, it might help to tune in on what frequency it's suppose to work at.

Hi Nick, I think it is just about to add or remove some turns from the Tesla coil to get the frequency you need?  Just it doesn't work linearly. You take of some turns and nothing will change and with the next turn removed the frequency will jump. In other words, it has jump characteristic. I think to calculate kacher frequency it is very hard-so many parameters to play (self inductance, self capacitance, the antena plays big role too- its size and distance , kacher's components used etc...)
Regards,

#### GeoFusion

• Sr. Member
• Posts: 449
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14450 on: July 03, 2016, 11:49:36 PM »
Hi Guyz

Well I would want to say something.

We could all start on the 37.5 meters of grenade wires or 40 meters long wires. does not matter.
But only If you want to drive it on another freq.
It will all vary to other resonant frequency ranges.
when that is done.
make sure to find the Resonant frequencies of series resonance with cap part on yoke to bifilar on grenade
and add tesla coil pulses to see gain.

In between all of this, the MOST IMPORTANT.
You need to see Synchronization & effect befor even removing wires to adjust freq and more.
no matter  if the tuning is not prefect yet, this one of the first steps in my experience!
If you don't see this, then there is something wrong with circuits or some connection missing.
you will need to see a small or big gain on the load ( small bulb at output part )
when kacher is connected with pushpull in synch.

I have let some buddies make nice PCB's of the kacher and Pushpull. They work individually great.
They are not working the same as my old kacher circuit nor pushpull for achieving effect.
It does not give effect, so the slightest change in circuit connection can make differences.
It will go under investigation to see where it does not.

SWR (Spin Wave Resonance)
is what is happening here as what T-1000 has said many times
And Tesla coil or HV coil to pulse is for the acceleration.

Check this out
some guy replicated synchronization and effect,  simple.

Cheerz~!

#### NickZ

• Hero Member
• Posts: 5169
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14451 on: July 04, 2016, 01:04:17 AM »
Geo: I was hoping that you'd show us how your circuit self runs, by now... not just how there's not even any OU, with or without the mediator coil.  You would be more convincing if your device could self run.

The posted video has a very weak Kacher circuit, and an even weaker induction circuit. The fact that the bulb lights up slightly with the Kacher adding it's output, is not convincing. As I doubt that it can self run, or even obtain OU with that weak output barely lighting the bulb.

I also doubt what T-1000 mentions about SWR, as well as what Wesley mentions about his electrostatic pump theory, (pumping electrons), from the ground or from where ever, concerning the true cause of a self running device.
Spin waves, electrons, moving electrons, etz...  That is Not how Tesla, nor Kapanadze would explain what is needed, or the mode of operation.
I personally don't care about the HOW it can happen, as I haven't seen it happening at all, as yet.
First thing is to obtain the "effect",  not just by showing lighting bulbs a bit brighter, but true OU, way over OU, instead.
Such as with the Poma device. It has No separate induction circuit, no complex nano pulser, TLL, and no separate mediator coil needed.  If true.
Possibly Poma's summator coil is doing the same function as your mediator coil.  Or not?

#### NickZ

• Hero Member
• Posts: 5169
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14452 on: July 04, 2016, 01:27:30 AM »
Hi Nick, I think it is just about to add or remove some turns from the Tesla coil to get the frequency you need?  Just it doesn't work linearly. You take of some turns and nothing will change and with the next turn removed the frequency will jump. In other words, it has jump characteristic. I think to calculate kacher frequency it is very hard-so many parameters to play (self inductance, self capacitance, the antena plays big role too- its size and distance , kacher's components used etc...)
Regards,

Yes John, I've done that. I've added and removed turns until my Kacher's secondary looks like a salad, all a bunch of pieces, soldered back together now.  No magic frequency in site.  Even after adding or removing ferrite pieces inside of the former tube.
Which can vary the frequency by as much as 1mHz.  And still no cigar.

#### AlienGrey

• Hero Member
• Posts: 3604
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14453 on: July 04, 2016, 02:26:21 AM »
Yes John, I've done that. I've added and removed turns until my Kacher's secondary looks like a salad, all a bunch of pieces, soldered back together now.  No magic frequency in site.  Even after adding or removing ferrite pieces inside of the former tube.
Which can vary the frequency by as much as 1mHz.  And still no cigar.
yes but ! 'how' did you assemble the grenade coil ?  and how much wire in on the windings ?

#### NickZ

• Hero Member
• Posts: 5169
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14454 on: July 04, 2016, 05:37:41 AM »
AG:
My grenade coil was wound exactly as was indicated previously.  Grenade 168t,  37.5m long,  48,48t, 24,24t, 12,12t
The inductor (1/2 of the output coil) 18.75m long. I can't remember the number of turns that it took, but was about 2.3 layers worth of turns.  Not the 1/4 ratio,  10m, long, like Ruslan is suggesting now.
I noticed that when I previously added more turns to the inductor coil, it lowered it's output.  So, maybe 9 to 10m may work better than the 18.5m size, to help sync the frequencies. I'll try that sometime, to see it there is any difference. For better, or worse.

At one point I was able to light 2 100w bulbs, just from the Kacher's output, at the grenade's output coil. Without connection from that grenade coil to the yoke. Just from that 168t coil to the bulbs, and the ground line.
But, the stronger the HV sparks, or streams, the more damage they can do to the more delicate components. That's where my 37.5m Earth ground line into my water well, comes in to save that from happening. Otherwise without that ground line, there's HV running everywhere and on everything. And that's what fries things out. That does not happen to the same extent when using a good outside ground connection.

#### SeaMonkey

• Hero Member
• Posts: 1292
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14455 on: July 04, 2016, 06:44:49 AM »
Quote from: NickZ
Yes John, I've done that. I've added and removed turns until my Kacher's secondary looks like a salad, all a bunch of pieces, soldered back together now.  No magic frequency in site.  Even after adding or removing ferrite pieces inside of the former tube.
Which can vary the frequency by as much as 1mHz.  And still no cigar.

Precisely Nick!  And, there won't be any Cigar.

Not to say that all of your work is without some benefit.
Knowledge is a valuable commodity and you're getting
a good amount of it.

Any day now it'll come to you that Free Energy is an
elusive carrot on a long stick.

#### AlienGrey

• Hero Member
• Posts: 3604
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14456 on: July 04, 2016, 12:33:30 PM »
AG:
My grenade coil was wound exactly as was indicated previously.  Grenade 168t,  37.5m long,  48,48t, 24,24t, 12,12t
The inductor (1/2 of the output coil) 18.75m long. I can't remember the number of turns that it took, but was about 2.3 layers worth of turns.  Not the 1/4 ratio,  10m, long, like Ruslan is suggesting now.
I noticed that when I previously added more turns to the inductor coil, it lowered it's output.  So, maybe 9 to 10m may work better than the 18.5m size, to help sync the frequencies. I'll try that sometime, to see it there is any difference. For better, or worse.

At one point I was able to light 2 100w bulbs, just from the Kacher's output, at the grenade's output coil. Without connection from that grenade coil to the yoke. Just from that 168t coil to the bulbs, and the ground line.
But, the stronger the HV sparks, or streams, the more damage they can do to the more delicate components. That's where my 37.5m Earth ground line into my water well, comes in to save that from happening. Otherwise without that ground line, there's HV running everywhere and on everything. And that's what fries things out. That does not happen to the same extent when using a good outside ground connection.
Sorry thought you were serious, have fun and good luck, over and out.
« Last Edit: July 04, 2016, 04:25:46 PM by AlienGrey »

#### NickZ

• Hero Member
• Posts: 5169
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14457 on: July 04, 2016, 03:53:53 PM »

AG:
Sorry, as well.  I thought that YOU were serious.

You are assuming that I didn't measure the total length.  I did. But, the details of it's build are not very clear now, as it was done a while back.  It's easy to cut the right size wire, and to cut the inductor at half of the output coil, or 1/4 (now).
You say that I'm starting from the bottom, look at my 3000 posts, here. And that I need help to cut the wire to the right size?
Radio guys know how to build self runners?
I'm not living on an Island.  I live in Costa Rica as I've previously mentioned, which is not an Island.
Pic below, of my town.

Once I get the induction circuit running again, I'll change the inductor to 1/4 of the output coil's size. And see it that works better, or not. The current inductor is  working well for now, as far as transfering power to the output coil from just the Kacher to partially light a 100w bulb.
I use the same type of sink drain tube 1 1/8 inches as the former, with the previously stated turns on it.  I made all this about two years ago. Not starting from the bottom, I've also added and removed turns on the output coil at different times, as well.

SeaMonkey:  Are you assuming that there is no free energy to be tapped from the ambient? Simply because we have not hit on it yet?  There's too many self runner out now to assume that it's all just fakes, or wishful thinking, with no results.
You should also be aware of Tesla's thoughts, and experiments. Concerning the Aether and tapping it's potential.  I don't think that there is anything illusive about what he says, or has done.  Except about his electric car.  That is still a tightly held secret.
I'm not into this just for the knowledge, as knowledge without practice, is well, you know...
I'm into it to power my house, car, bikes, etz...
If this were simple, it would have been common knowledge long ago.  It's not simple. It's hard to get the sought after results.
You have to be Russian, drink vodka, smoke, and wear magic shoes...
Not trying to be too serious, just trying to have some fun.  For me this is fun, and exciting.

« Last Edit: July 04, 2016, 05:58:03 PM by NickZ »

#### SolarLab

• Hero Member
• Posts: 577
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14458 on: July 04, 2016, 04:28:49 PM »
F.Y.I.

SWR Clarification:

Generally, when working with Electromagnetic Waves [EM, Radio Frequency (RF), helical coils (slow wave cavities)], SWR refers to "Standing Wave Ratio" or VSWR {Voltage Standing Wave Ratio}; |Vmax/Vmin|.

Refs: https://en.wikipedia.org/wiki/Standing_wave  - click on the right-hand figure and follow the ">" for animated cartoons;

Also: http://hamwaves.com/antennas/inductance/corum.pdf  - "RF Coils, Helical Resonators and Voltage Magnification by Coherent Spatial Modes," Corum and Corum, 2001. Detailed analysis with math. Use PDF "Find" SWR or VSWR.

"Abstract - By modeling a wire-wound coil as an anisotropically conducting cylindrical boundary, one may start from Maxwell's equations and deduce the structure's resonant behavior. Not only can the propagation factor and characteristic impedance be determined for such a helically disposed surface wave-guide, but also its resonances, "self-capacitance" (so-called), and its voltage magnification by standing waves. Further, the Tesla coil passes to a conventional lumped element inductor as the helix is electrically shortened."

Also: http://www.arrl.org/files/file/Technology/tis/info/pdf/q1106037.pdf - "Understanding SWR by Example," Walraven, QST 2006. Overview but gives Smith Chart VSWR/SWR relationships.

Spin Waves, to a great extent, are still somewhat ill defined but apparently relate to excitation's occurring in magnetic lattices - magnetic materials (equivalent quasiparticle point of view - a.k.a magnons; boson modes of the spin lattice that correspond roughly to the phonon excitation's of the nuclear lattice, or whatever!). Spin Wave Resonance might also have the acronym SWR, however I have yet to see that.

Ref: https://en.wikipedia.org/wiki/Spin_wave

Have a nice Summer everyone, maybe by this Fall things will start to gel a bit more! ... BTW, CAE EM simulations are progressing; very slow but steady.

FIN

#### AlienGrey

• Hero Member
• Posts: 3604
##### Re: Kapanadze Cousin - DALLY FREE ENERGY
« Reply #14459 on: July 04, 2016, 04:39:37 PM »

AG:
You are assuming that I didn't measure the total length.  I did. But, the details of it's build are not very clear now, as it was done a while back.  It's easy to cut the right size wire, and to cut the inductor at half of the output coil, or 1/4 (now).
You say that I'm starting from the bottom, look at my 3000 posts, here. And that I need help to cut the wire to the right size?
Radio guys know how to build self runners?
I'm not living on an Island.  I live in Costa Rica as I'm previously mentioned, which is not an Island.
Pic below, of my town.

Once I get the induction circuit running again, I'll change the inductor to 1/4 of the output coil's size. And see it that works better, or not. The current inductor is  working well for now, as far as transfering power to the output coil from just the Kacher to partially light a 100w bulb.
I use the same type of sink drain tube 1 1/8 inches as the former, with the previously stated turns on it.  I made all this about two years ago. Not starting from the bottom, I've also added and removed turns on the output coil at different times, as well.

SeaMonkey:  Are you assuming that there is no free energy to be tapped from the ambient, simply because we have not hit on it yet?  There's too many self runner out now to assume that it's all just fakes, or wishful thinking, with no results.
If this were simple, it would have been common knowledge long ago.  It's not simple. It's hard to get the sought after results.
You have to be Russian, drink vodka, smoke, and wear magic shoes...

1.5 in pipe ! difficult to get precision hairpin bends with that dia and 2.5 mill cable.
Costa Rica, nice view but got idea of a watery where you are ! Not far wrong by the looks of it in your photo!  https://en.wikipedia.org/wiki/Costa_Rica