Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11806358 times)

Hoppy · « **Reply #1035 on:** April 23, 2013, 10:18:44 PM »

Quote from: verpies on April 23, 2013, 10:13:33 PM

Sure looks like a twin wire cable that was not visible in the video.

P.S.
PayPal is evil.

It can be seen in the video at 8:09: http://www.youtube.com/watch?v=cUVvZzeDe5U&feature=youtu.be

verpies · « **Reply #1036 on:** April 23, 2013, 10:41:25 PM »

Quote from: Hoppy on April 23, 2013, 10:18:44 PM

It can be seen in the video at 8:09: http://www.youtube.com/watch?v=cUVvZzeDe5U&feature=youtu.be

Yes, it can.
I've never seen a clip of that device longer than 6min.

NickZ · « **Reply #1037 on:** April 23, 2013, 11:17:03 PM »

If you are talking about the white wire on the upper left hand corner, that wire in NOT going off and behind the chair. If it were, do you think that he would just leave it like that, up in the air, for all to see. If this is not what you are talking about, then what it?

I looked at some more of the Romanov's videos, and I've not seen anywhere that he is showing his circuit running while disconnected from the power supply source.
His power supply is connected going to the big black tall capacitor, and further to what looks like a commercial type of switching driver circuit, then to 4 coils wound on the same plastic tube. And 3 amp plus draw, is only lighting a single bulb.
I probably have more light output from a 500mA draw at 12v, Cfl bulb. More lumins, at least. Not bragging, just trying to be reasonable.

No doubt that akula is using the same basic ideas, but a whole different way of doing it.
So, I wouldn't say that it is a copy of the Romancorp set up, but possibly a version of it, instead.
Akula's air cores are using what looks like insulated stranded house wire, not solid magnet wire, like Romanov is. And his big metal (aluminum) AC caps are normal for start up or drive Ac motors units, etz... I don't know what the big black capacitor is on the Romanov video, but I imagine an old 220 AC cap, as well.
My feelings are still that the akula system set up is true as to what is being shown.
But, all the Romanov videos are as blurry as are akulas, so it's very hard to tell.

Please correct me if I'm wrong, as these are all only assumption, at best.

NickZ · « **Reply #1038 on:** April 23, 2013, 11:48:50 PM »

Verpies:
The original akula video that was shown on YouTube is 8.41 long, not 6 min, as you are thinking. Here: http://www.youtube.com/watch?v=_e3RpsEZE14
As Idzaza mentioned previously, there were really two videos, one inside the house, and one made outside in the yard, then were edited together, with a false diagram added at the end.
So, who knows who the real builder is, maybe Wesley knows, as he asked someone for permission to translate the video.

Hoppy · « **Reply #1039 on:** April 24, 2013, 12:08:13 AM »

Quote from: NickZ on April 23, 2013, 11:17:03 PM

If you are talking about the white wire on the upper left hand corner, that wire in NOT going off and behind the chair. If it were, do you think that he would just leave it like that, up in the air, for all to see. If this is not what you are talking about, then what it?

Look where the red arrow tips are pointing

NickZ · « **Reply #1040 on:** April 24, 2013, 02:17:25 AM »

I looked at both videos, the Russian version is 8.41 minutes long, and the translated version is 14.20 minutes long. In neither videos at the 8.09 minute point do I see anything to indicate a false input source, or the red arrow tips that you mention.
I repeat, What are talking about?

Think for one minute, why would a guy put up a video such as this, then in one day remove it, as well as ALL his videos on his web site. IF it doesn't work??? Threats, or...

Most replications aren't showing anything that really works, either, like maybe 99.9 % of them. People have had threats on their lives, for showing less than what has been shown by akula0083. At least that is what has been mentioned, which I also take as given. I take everything at face value, until proven otherwise. Stupid, or naive, perhaps...

Can't we just look for how it works, instead of how it doesn't.
Watch the bulbs dim, as the third one is placed in the socket, probably less than the 750 watts that Wesley is estimating to be the actual output. And how concerned he is at the component heat getting too high from HV, Ui, yu,yui... But, No shock when touching anything such as the heat sinks.
My heat sinks will light a neon bulb. Proof of a HV feed-back going to the 12v Dc input source.
Any ways, I hear the wild goose calling me. Gotta go.

Hoppy · « **Reply #1041 on:** April 24, 2013, 08:43:06 AM »

Quote from: NickZ on April 24, 2013, 02:17:25 AM

I looked at both videos, the Russian version is 8.41 minutes long, and the translated version is 14.20 minutes long. In neither videos at the 8.09 minute point do I see anything to indicate a false input source, or the red arrow tips that you mention.
I repeat, What are talking about?

Think for one minute, why would a guy put up a video such as this, then in one day remove it, as well as ALL his videos on his web site. IF it doesn't work??? Threats, or...

Most replications aren't showing anything that really works, either, like maybe 99.9 % of them. People have had threats on their lives, for showing less than what has been shown by akula0083. At least that is what has been mentioned, which I also take as given. I take everything at face value, until proven otherwise. Stupid, or naive, perhaps...

Can't we just look for how it works, instead of how it doesn't.
Watch the bulbs dim, as the third one is placed in the socket, probably less than the 750 watts that Wesley is estimating to be the actual output. And how concerned he is at the component heat getting too high from HV, Ui, yu,yui... But, No shock when touching anything such as the heat sinks.
My heat sinks will light a neon bulb. Proof of a HV feed-back going to the 12v Dc input source.
Any ways, I hear the wild goose calling me. Gotta go.

Look at my post 1032 for the red arrows on the video clip showing the twin wire cable. The following link to the Tungus video narrated by Wesley also shows the twin wire cable at at 8:09: - http://www.youtube.com/watch?v=cUVvZzeDe5U&feature=youtu.be

T-1000 · « **Reply #1042 on:** April 24, 2013, 05:24:24 PM »

@NickZ
You caneliminate HV feedback if you make resonant LC circuit on primary. This is what Romanov's circuit is showing as well.

@itsu
You do not need yoke for step up transformer. If you would like to rebuild akula's version, the yoke there was used just to step up voltage from flip-flop circuit. The Romanov's latest simplified versions skip this part and do flip-flop directly on air core transformer. The main trick was mentioned multiple times - you make standing wave on air core transformer with one coil of thin wire(TT secondary) as voltage source and another coil (asymetrical D. Smith style) whith 2mm+ diameter wire as current source with 1/4 wavelenth resonant frequency of thin wire coil and connected via capacitor between them with resonance in series for lots of amps... The sweet spot where mixing of these two occur has good voltage and good amperage for your load.

NickZ · « **Reply #1043 on:** April 24, 2013, 05:43:35 PM »

Ok, now I see what you are talking about. Thanks, and sorry I missed it before.
But, this "twin cable" is not going anywhere that I can see, like on the cement slab.
So, HOW, is it going to power this device? And again, if that were the case, would he be allowing it to be seen? Just by accident on his part?
There is alot of work being done there, (just to fool people?). And for what purpose, fun and games? NO, I don't think so.
So, for now, I will remain skeptical of that "cable" as well, but continue to explore, and take this all in with grain of sand. Or wait for him to lift the device off of the chair, and walk around with it.

I must admit that I also had missed Itsu's post, which I just now saw.
So... Greatings to Itsu from Nick in Costa Rica. And thank you for your truthful reply.
Well, I understand how you must feel Itsu, and do empathize with your sentiments.
However, I must push forward with this, as sitting on my hands will not resolve it for me.
I have been studying the Russian tests and videos , and trying to understand their logic, and their words, as best as I can. They are really much more open, and advanced to all this, than we are. And thus, are getting somewhere, or maybe just running around in circles, but it doesn't look like it.

So, back to the lab for me. Have to find my goose whistle, first..
Later!

Hoppy · « **Reply #1044 on:** April 24, 2013, 06:17:38 PM »

Quote from: NickZ on April 24, 2013, 05:43:35 PM

Ok, now I see what you are talking about. Thanks, and sorry I missed it before.
But, this "twin cable" is not going anywhere that I can see, like on the cement slab.
So, HOW, is it going to power this device? And again, if that were the case, would he be allowing it to be seen? Just by accident on his part?
There is alot of work being done there, (just to fool people?). And for what purpose, fun and games? NO, I don't think so.
So, for now, I will remain skeptical of that "cable" as well, but continue to explore, and take this all in with grain of sand. Or wait for him to lift the device off of the chair, and walk around with it.

I must admit that I also had missed Itsu's post, which I just now saw.
So... Greatings to Itsu from Nick in Costa Rica. And thank you for your truthful reply.
Well, I understand how you must feel Itsu, and do empathize with your sentiments.
However, I must push forward with this, as sitting on my hands will not resolve it for me.
I have been studying the Russian tests and videos , and trying to understand their logic, and their words, as best as I can. They are really much more open, and advanced to all this, than we are. And thus, are getting somewhere, or maybe just running around in circles, but it doesn't look like it.

So, back to the lab for me. Have to find my goose whistle, first..
Later!

There is something resembling a cable coming out of the crack in the cement slab behind the chair that I mentioned some time back on the other thread but the video quality is too poor to resolve it well at the distance it is seen on camera. It is therefore not possible for me to be sure that the cable on the chair seat does not link to a cable on the floor. I would have made quite sure that no cables could be seen off the demo board to remove any sign of faking, so it is strange that we see this cable on the chair below the demo board. Someone with appropriate software may be able to resolve this into a clearer picture.

NickZ · « **Reply #1045 on:** April 24, 2013, 07:24:44 PM »

T-1000:
Maybe what you are saying, or Romanov is mentioning will work.
But, that is NOT what TK is saying, and also not what akula is saying.
TK is mentioning (if true) that feed back is what is making it all "self run". The battery and inverter like on the 2004 device for example, are for the 220v starting input source. But, then the HV/HF feed-back continues (possibly through the rectifier) and loops back to input from there.
Please correct me if I have this wrong. As, I'm just repeating what has been said.
I don't know, nor assume to know.

Romanov's circuit is NOT SELF RUNNING, from what I've seen so far. Nor have I seen any his several devices self running without any input source, in any of his videos, yet.
The akula device is self running, as is being shown, and is lighting up 1000 watts worth of bulbs to some unknown degree, but with possibly much less output power than that.

Magnetic resonance originating from the Earth's magnetic flux is what is being given as the source behind all this. And, is what is being mentioned as the "Secret" by akula.
Resonance from the flip-flop circuit is mentioned by Romanov referring to his coils output. From what little I can understand of his explanations.

Some Russians guys are using the neon sign inverter in some cases. That little box outputs over 7.500 volts. And, may be what is also being shown as the driver in Romanov's videos, or akula's as well. But, I don't know, maybe one of you can give a better idea of what the circuit they are both using may be. If we can just buy it, ready made, that would be great.

NickZ · « **Reply #1046 on:** April 25, 2013, 02:00:17 AM »

Cepren B:
Wow, holy s**t, you've done it. Congratulations!!! Or, whoever did it, as you never know, anymore.

Seams like I remember (me) saying something about the aluminum tube (with a slit), but someone beat me to it. Some one said that it would not help. Well, maybe it does help. It's a nuclear reactor core, Ha! Cheap too! Ok... maybe it's not...

Can you or whoever, please make another video, showing the whole circuit and its input source disconnected (or not). No battery, no ground wire, no cracks in the concrete, additional wires, etz... So my Doubting Thomas friends will not keep having more excuses, to talk about. They will anyway, but it may help to some extent.
It might even inspire them to build something, for a change.
I'm sorry guys, I didn't mean that... Or did I? Ha! Just kidding!!!
a.king, and Zeitmaschine, Where's the vodka, and cigars, we need to celebrate... Russian style. Right? Too early yet... Of course not!

Itsu: your wish has come true, someone did make another working replication.
The game is on... time to take the dust off of the old coils.

Grum: Get your Geiger counter ready.

Wesley: You are more than ready for it.

Hoppy: Look for cracks, wires, etz...

And Nick?, Ok, Nick will shut up now, so, don't take me seriously. It's all for the good.

Hoppy · « **Reply #1047 on:** April 25, 2013, 10:44:45 AM »

Quote from: NickZ on April 25, 2013, 02:00:17 AM

Cepren B:

Can you or whoever, please make another video, showing the whole circuit and its input source disconnected (or not). No battery, no ground wire, no cracks in the concrete, additional wires, etz... So my Doubting Thomas friends will not keep having more excuses, to talk about. They will anyway, but it may help to some extent.

That's a crafty one Nick, by encouraging more ingenuity, that will make it harder to find the 'X' wires.

NickZ · « **Reply #1048 on:** April 25, 2013, 04:35:37 PM »

Well, that's one way to look at it. But, my real intention is for there not to be any deception, not to encourage ingenuity. In any case, we need to sharpen our detection skills, as so far nothing has been proven, yet. One way or the other.

We don't know WHO made this device, or who made the diagram of it. If the two even relate to each other, or where this device even comes from. So, this all brings up many questions, (or doubts), as well as the camera being held almost touching the device, Why??? So, this all looks suspicious to me, as well as his slightly partial views on origin of Tesla being Russian, (my father was from Yugoslavia), and his views on world history, etz...

This circuit (below), IS showing a feed-back path, but I could not make out in the video if it was able to run itself, without the 12v, .8ah battery source connected. Can anyone help to answer this? This is very important, at least it is for me.
Also, I think that the whole low voltage part of the circuit (left hand side) is nothing more than a simple twin transistor (MOS-FET), oscillator circuit, to provide the higher pulses to the big air core. The right side of the circuit is a regular iron core transformer going to the bulb (of unknown wattage), and then feed-back to source through a regular simple commercially made rectifier/cap circuit. That is how I see it. Although the coils are still a mistery to me. Aluminum "reactor", and all.
It is also showing a similar self-running feed-back idea, as what TK mentioned previously, as well as what akula0083 is showing, (possibly). But, it is self-running???
(http://www.overunity.com/7679/selfrunning-free-energy-devices-up-to-5-kw-from-tariel-kapanadze/dlattach/attach/122905/image//)
(http://www.overunity.com/Themes/default/images/icons/clip.gif) OU GEN.JPG (92.99 kB, 1415x759 - viewed 305 times.)

Hoppy · « **Reply #1049 on:** April 25, 2013, 05:04:58 PM »

Quote from: NickZ on April 25, 2013, 04:35:37 PM

Well, that's one way to look at it. But, my real intention is for there not to be any deception, not to encourage ingenuity. In any case, we need to sharpen our detection skills, as so far nothing has been proven, yet. One way or the other.

We don't know WHO made this device, or who made the diagram of it. If the two even relate to each other, or where this device even comes from. So, this all brings up many questions, (or doubts), as well as the camera being held almost touching the device, Why??? So, this all looks suspicious to me, as well as his slightly partial views on origin of Tesla being Russian, (my father was from Yugoslavia), and his views on world history, etz...
I will try to be less ingenious, next time... I didn't mean to blow your kool.

Nick,

This is a clip from the video at 4:34. Go look yourself at: http://www.youtube.com/watch?v=gz0IPdPbHvA.

It just looks like a close-up because it has been 'grabbed' from the screen by capture software.

News:

User Menu

Author Topic: Kapanadze Cousin - DALLY FREE ENERGY (Read 11806358 times)

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

verpies

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

T-1000

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY

NickZ

Re: Kapanadze Cousin - DALLY FREE ENERGY

Hoppy

Re: Kapanadze Cousin - DALLY FREE ENERGY