Free Energy | searching for free energy and discussing free energy

Solid States Devices => solid state devices => Topic started by: leviterande on September 03, 2012, 05:18:01 PM

Title: A truly interesting transformer overunity concept
Post by: leviterande on September 03, 2012, 05:18:01 PM
Hi everyone.

I have an idea and wonder why no body even thought about it, and I would love to know why it wouldnt work:

We all know  that a certain air-core coil at a given current will produce a certain magnetic field
take that same coil and  put an iron inside it and you will amplify the magnetic field 100 to  1000s of times... FOR THE SAME  INPUT CURRENT!!!

NOW.. here is  my thoughts on an overunity transformer:
A Simple transformer where the primary is a iron core coil and the secondary is an air core coil with the same  number  of turns.
Now..  since the  primary is giving 100s times more magnetic strength  at the same input, shouldnt it induce this same magnetic field and current into the secondary air core?  if thats the case, the secondary  output should also be in 100s of times more current.. right?

 Eddy currents and hysteresis is greatly reduced by lamination and  control so what we got left is the  opposing field of the secondary...   

I really would love  to know why this concept will not work? 

Thanx
Title: Re: A truly interesting transformer overunity concept
Post by: FatBird on September 03, 2012, 06:12:04 PM
It won't work because the magnetic flux will follow the best magnetic path, which is the Iron Core.
 
Therefore, the air core winding won't get anything.
 
.
Title: Re: A truly interesting transformer overunity concept
Post by: leviterande on September 03, 2012, 07:32:46 PM
Thank you for the reply

So you mean if I move the iron core coil up and down THROUGH an air coil, there wont be any current induced int eh air core?  Im sorry but I find that little hard to believe ha?

Regards
Leviterande
Title: Re: A truly interesting transformer overunity concept
Post by: FatBird on September 03, 2012, 08:37:09 PM
Since you are so sure it will work, go ahead & build it.
 
Then take some pictures of it working & post them here.
Submit the O/U numbers & proofs to WIN the OVERUNITY MONEY PRIZE.
 
.
Title: Re: A truly interesting transformer overunity concept
Post by: leviterande on September 03, 2012, 08:50:51 PM
No no, I  didnt mean by any means that it will work,  I just searched the  net and didnt find any  overunity transformer, article, info  that uses an asymmetrical system i.e. an iron core on one side and an air core on the  other..  So I just dont know where to search or read .   The MEG, Flynn, radus concepts obviously didnt work. I am by no means  saying this will work, on the contrary  99,9% it wont work because of "common sense" or how in the world didnt any body do it  till now!!!
But once again here is where its extremely confusing and I cant find anywhere any information that can help on the matter..  All the induction theory is based on  iron core to iron core induction or a magnet to an coil.    the thing is (i may way wrong here)  is while the Flynn concept(which doesnt seem to   yield overunity) is at 3.47x output, an iron core  is  up to 10,000x the output  vs an air core one. There is where  I see the possibility...

So while  the people got blind by using "magnets as means of power" they forgot that we can  creat much  much powerful electromagnets  with very very little power by  using a ferromagnetic material!

Regards
Title: Re: A truly interesting transformer overunity concept
Post by: cristache on September 03, 2012, 09:01:30 PM
If both coils are face to face, one with iron core and one without iron core, the one with no iron core will have a lower flux density and flux swing due to AC voltage on the primary coil.
This means less voltage induced on the "secondary".
Even, let's assume for a moment will do what you expect, the problem will start as soon as you get load/current in the secondary it will reflect in the primary in the same amount so no overunity here.
Title: Re: A truly interesting transformer overunity concept
Post by: leviterande on September 03, 2012, 09:15:23 PM
"Even, let's assume for a moment will do what you expect, the problem will start as soon as you get load/current in the secondary it will reflect in the primary in the same amount so no overunity here."

this is the part that is interesting and that I have read about many times in overunity forums,. Im not sure if I understand it though but let me try: what you said is that as fast as I put load  on the secondary, the primary´s current draw will increase immediately , right?

If so.. why exactly?

Levi
Title: Re: A truly interesting transformer overunity concept
Post by: cristache on September 03, 2012, 09:30:18 PM
Let's say you apply a sinus AC on the primary. On the sin increasing slope you have an increasing flux in the primary iron core which increases the flux in the air core - a portion of the primary flux since air has lower magnetic permeability (1 compared with iron around 200). So if you have a dB swing at 0.5T in the iron core, you'll have 0.0025T swing in the air core. The induced voltage is E = -NA dB/dt. The minus in front of the equation tells you the voltage showing on the secondary is such a way that it will create a magnetic flux in the coil (secondary), when a load is applied, such a way that it fights you applied flux. That's what we call Lenz law. It is discovered experimentally, we don't have an explanation why it is that way.
So long story short the current created in the secondary when a load is connected due to induced voltage it will fight the cause (call it action and reaction if you will).

Title: Re: A truly interesting transformer overunity concept
Post by: leviterande on September 03, 2012, 09:51:03 PM
Thanx for your reply
So this is the reason and the "delicate part" where the  Flynn, Bearden MEG overunity concept fails ?
Title: Re: A truly interesting transformer overunity concept
Post by: cristache on September 03, 2012, 10:02:38 PM
Not sure about Flynn parallel path. That looks like it has some potential.
As for Bearden I tried many times to simulate using FEMM and the amount of energy you're putting in the control coil to divert the PM flux in the core section where your pickup coils are seems to be equal with what you get back from the pickup coil. I admit I didn't tested experimentally myself. But if MEG would have potential, we'll have it all of us in our homes by now...

You can test your concept with a PM oscillating along its axes and have a pickup coil - a big one since it's air core. Then short the coil and you'll see the magnet movement will slow down as the magnetic fields produced by the induced current is fighting back.

In transformers is a little different, the flux reduction on the primary due to secondary flux fighting back, will reduce the primary inductance which will increase the current in the primary. Current increased in primary will cause bigger flux swing on primary and secondary which will compensate for the secondary load. That's how the transformer will self-adjust to the load on the secondary up to a limit - saturation current - where no matter how big the current is, there is no increase in magnetic flux, so that current/power/energy is just lost in vane.
Title: Re: A truly interesting transformer overunity concept
Post by: leviterande on September 03, 2012, 10:28:47 PM
I dont understand why people are seeing that the "MEG" has some potential while not  seeing that a traditional iron core electromagnet is also having  some phenomenal  potential as well (if you want to see it that way).  Let me explain, The whole concept of flynn/Radus MEG is that you turn off the magnetpower with a power seemingly  less than  that of the magnet itself. in the case of FLynn the  total force is 3700grams   from which is 1100 grams  that you pay for coming from an electromagnet. so you are using 1/3 of the power  to  gate the magnetic flux which seems to be a key to overunity. I thought it to be  the final key to overunity until  a extremely simple thought hit me: an  iron electromagnet is in fact much much more effective..  how? well  for a single simple iron core el.magnet you are also only putting a 1/200th of the  power!!! to power and control the electromagnet. In the flynn MEG you  use 1100grams out of 3800 which is roughly 1/3 of the power..  you see where I am going?

 Im not sure if I am absolutely right or  if my   meaning didnt go through, but your explanation to why  my original iron-core-aircore theory wouldnt work SHOULD precisely  apply as well to  the flynn device.

Thanx
Title: Re: A truly interesting transformer overunity concept
Post by: cristache on September 03, 2012, 10:37:08 PM
Problem is: can you keep that power level constant and less than you draw from the system?
I would say PM have more potential since the power density they have and you don't have to put your own energy into them.
But then again is difficult to avoid Lenz law and the fact the magnetic field is conservative - loop integral of the work (force by distance) is null.
The moment we figure out how the make the field non-conservative within a certain configuration we get the overunity, or more correctly put we get the energy from the magnet.
Title: Re: A truly interesting transformer overunity concept
Post by: leviterande on September 03, 2012, 10:55:28 PM
What exactly are you referring to by "PM"?
Title: Re: A truly interesting transformer overunity concept
Post by: cristache on September 03, 2012, 11:08:17 PM
permanent magnet
Title: Re: A truly interesting transformer overunity concept
Post by: ionizer on September 03, 2012, 11:21:25 PM
You need coupling between an external source.
Not overunity but it can be free energy in that you don't have to pay for it.
But don't think some hooptie dooptie core will magically start to deliver energy i't won't happen you need an energy source power has to come from somwhere.
Title: Re: A truly interesting transformer overunity concept
Post by: Qwert on September 04, 2012, 01:51:07 AM
Hi. On this new thread one of you said that he was looking for an answer in some sources. Did you see William Beatty's site http://amasci.com (http://amasci.com) ? Here's one possibility: http://amasci.com/elect/poynt/poynt.html (http://amasci.com/elect/poynt/poynt.html)
and another one
http://amasci.com/elect/mcoils.html
Title: Re: A truly interesting transformer overunity concept
Post by: Farmhand on September 04, 2012, 03:00:43 AM
Maybe this document will help.  http://sound.westhost.com/xfmr.htm

I think adding the core will only concentrate the flux and increase the magnetic flux density
but will not increase the amount of magnetic flux, I'm not sure if will effectively increase the
magnetic field strength, I guess it will  but the field would be more concentrated I guess. (smaller less area)
Then there is flux linkage ect. From what I can deduce adding a core will not increase the magnetic flux itself ( the amount of magnetism)

 
Quote
2.   Magnetic Core Terminology
This list is far from complete, but will be sufficient to either get you started or scare you away. I have included the symbols and units of only three of the entries below, since most are of no real interest.

Coercivity - is the field strength which must be applied to reduce (or coerce) the remanent flux to zero. Materials with high coercivity (e.g. those used for permanent magnets) are called hard. Materials with low coercivity (those used for transformers) are called soft.

Effective Area - of a core is the cross sectional area of the centre limb for E-I laminations, or the total area for a toroid. Usually this corresponds to the physical dimensions of the core but because flux may not be distributed evenly the manufacturer may specify a value which reflects this.

Effective length - of a core is the distance which the magnetic flux travels in making a complete circuit. Usually this corresponds closely to the average of the physical dimensions of the core, but because flux has a tendency to concentrate on the inside corners of the path the manufacturer may specify a value for the effective length.

Flux Density - (symbol; B, unit; Teslas (T)) is simply the total flux divided by the effective area of the magnetic circuit through which it flows.

Flux linkage - in an ideal inductor the flux generated by one turn would be contained within all the other turns. Real coils come close to this ideal when the other dimensions of the coil are small compared with its diameter, or if a suitable core guides the flux through the windings.

Magnetomotive Force - MMF can be thought of as the magnetic equivalent of electromotive force. It is the product of the current flowing in a coil and the number of turns that make up the coil.

Magnetic Field Strength - (symbol: H, unit; ampere metres (A m-1)) when current flows in a conductor, it is always accompanied by a magnetic field. The strength, or intensity, of this field is proportional to the amount of current and inversely proportional to the distance from the conductor (hence the -1 superscript).

Magnetic Flux - (symbol: ; unit: Webers (Wb)) we refer to magnetism in terms of lines of force or flux, which is a measure of the total amount of magnetism.

Permeability - (symbol; µ, units: henrys per metre (Hm-1) is defined as the ratio of flux density to field strength, and is determined by the type of material within the magnetic field - i.e. the core material itself. Most references to permeability are actually to "relative permeability", as the permeability of nearly all materials changes depending upon field strength (and in most cases with temperature as well).

Remanence - (or remnance) is the flux density which remains in a magnetic material when the externally applied field is removed. Transformers require the lowest possible remanence, while permanent magnets need a high value of remanence.

Cheers
Title: Re: A truly interesting transformer overunity concept
Post by: Tito L. Oracion on September 04, 2012, 04:52:53 AM
I dont understand why people are seeing that the "MEG" has some potential while not  seeing that a traditional iron core electromagnet is also having  some phenomenal  potential as well (if you want to see it that way).  Let me explain, The whole concept of flynn/Radus MEG is that you turn off the magnetpower with a power seemingly  less than  that of the magnet itself. in the case of FLynn the  total force is 3700grams   from which is 1100 grams  that you pay for coming from an electromagnet. so you are using 1/3 of the power  to  gate the magnetic flux which seems to be a key to overunity. I thought it to be  the final key to overunity until  a extremely simple thought hit me: an  iron electromagnet is in fact much much more effective..  how? well  for a single simple iron core el.magnet you are also only putting a 1/200th of the  power!!! to power and control the electromagnet. In the flynn MEG you  use 1100grams out of 3800 which is roughly 1/3 of the power..  you see where I am going?

 Im not sure if I am absolutely right or  if my   meaning didnt go through, but your explanation to why  my original iron-core-aircore theory wouldnt work SHOULD precisely  apply as well to  the flynn device.

Thanx


Everything has a potential like everyone has a potential, overunity is just an ARRANGEMENT  that's why many overunity device cannot be sold because the arrangement is so easy to copy.


its like a small fire that can become a very big fire.


MEG has a special winding arrangement that's why it can make energy more than input.


now if you want to know free energy then study tesla and all his patents deeply.  ;)
 especially those that makes high potential, high current ....

like for example here:
  http://amasci.com/elect/mcoils.html (http://amasci.com/elect/mcoils.html)


if you add coils to other part of the core of the Transformer is not the way to overunity but to boost it first then collect.  ;)
and that is the way!



 ;D
Title: Re: A truly interesting transformer overunity concept
Post by: Newton II on September 04, 2012, 05:45:26 AM
Hi everyone.

I have an idea and wonder why no body even thought about it, and I would love to know why it wouldnt work:

We all know  that a certain air-core coil at a given current will produce a certain magnetic field
take that same coil and  put an iron inside it and you will amplify the magnetic field 100 to  1000s of times... FOR THE SAME  INPUT CURRENT!!!




 
You are forgetting the reverse of it.    If you put iron inside air core,  it will definitely  amplify the magnetic field 100 to 1000 times.  But reversely  it also means that you should have variation of 100 to 1000 times flux  to produce the given current in the same core.   If you remove iron materials from the coils of a normal generator and rotate the magnetic poles infront of air cores,  will it generate same electricity as a normal generator?   IT will not.   Flux of the magnet has to amplified 100 to 1000 times using iron materials to get normal elecricity production.

I think Fatbirds answer is right.   From air core you will not get anything.



 

Title: Re: A truly interesting transformer overunity concept
Post by: Paul-R on September 04, 2012, 04:30:13 PM
and you will amplify the magnetic field 100 to  1000s of times... FOR THE SAME  INPUT CURRENT!!!
I don't think so. Surely the current to "fill" the iron cored coil will be greater.
Title: Re: A truly interesting transformer overunity concept
Post by: leviterande on September 04, 2012, 09:04:20 PM
This is really a truly  positive and nice forum and I appreciate all the responses
Paul, I  agree.  shouldn't this also mean that all the MEG devices concepts are pure  bogus too?  Seriously we maybe and I mean "MAYBE" shouldn't be fooled that  a permanent magnet "ingredience" in a  device will magically solve the overunity issue and this will lead me to my main point of the issue:

if you need a free STATIC magnetic field, you  ofcourse  choose a magnet
, however  most forget that a  good ferromagnetic electromagnet also PRODUCES  superior static magnetic field with  very  small power.

Hoever now,   one said that an iron core  "only concentrates the flux" and not strengthening it. if this is the case than,  all the ideas  written by me are 100% meaningless and 100% invalid, because   there is no difference in this case between an iron core and an air core... well... all hopes are 100% gone in this case.. but really. Im saying... is the magnetic flex only concentrated  and never increased?. Anyway.. Total lifting power is much stronger in an iron cored coil..

Leviterande
Title: Re: A truly interesting transformer overunity concept
Post by: leviterande on September 08, 2012, 01:55:13 AM
I may be  a stupid, foolish ignorant guy but please explain to my little mind how   the Flynn concept could ever  be cabaple of OverUnity, why is it so hyped when a simple electromagnet is far superior obviously:
 
Why  I think so? For the heck of it and to show my  main  point/question lets just first  see the following TWO examples:
 
1-Flynn device: is claimed to output 3.5 times more than  " input/other electromagnets/otherdevices etc"  ha?? how can you even say such a thing..electromagnets can be made from inefficient to super efficient. a flynn PP device consumed like 0.2watts,  and outputted 650grams.
W/o the magnets it outputted 200g.  So wait a second...,the electromagnet here did only lift 200g, Thats a very very weak electromagnet and we could as well get rid of the PP path and the magnets and just work on the electromagnet part. In other words, we can throw the magnets and for the same 0.2 watts we can get 40lbs out of the coil itself, instead of 1.5lbs(650grams)

  B = 4Ï€ x(10 -7)x k x n x I
2 -A ferromagnetic core electromagnet:  on the other hand lifts 1200lbs with 6watts at 12v and 0.5A and a toy magnet will lift 500lbs with  2 D-cells

so whats the difference here? ha? its all about the power in vs  whats comig out.
I really hope you get my point here, Im not making any theory or any opinion. Im not saying that an electromagnet will produce overunity. Im just stating  that  Flynn device  is nothing more than  n "elegant strange looking" electromagnet that isnt even strong  or efficient as other   stronger ones...and I really really want to know why the flynn meg idea is any BETTER than just a rather standard electromagnet..... why all this hype ;)