Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Removing body heat from suit -> electricity  (Read 8622 times)

X

  • Newbie
  • *
  • Posts: 2
Removing body heat from suit -> electricity
« on: March 28, 2012, 05:06:13 PM »
I'm thinking of Lindemann's pamphlet about Tesla's self-acting engine, and have this idea:

1. Put a tube which spirals down then up inside a suit with good insulation.
2. The tube has a check valve at each end, so we can call the ends intake and outlet.
3. Outlet is connected to a throttle fixed to the upper back of the suit.
4. The throttle is connected to the inlet of a centrifugal generator also fixed to the upper back of the suit.
5. Intake is connected to the output of the generator.
6. The tubes are filled with liquid that boils around 30? degrees c.

Hopefully the centrifugal generator would steal enough motion from the atoms that the liquid would cool without use of a compressor.

The major problem is the throttle. I'm trying to think how it could be designed without the use of electronics. It needs to let the pressure build up, then release and stay open until the pressure equalizes, then close. If there's such a valve, please give a link. Nothing I think of works.


Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: Removing body heat from suit -> electricity
« Reply #1 on: March 30, 2012, 01:10:19 PM »
You need a safety valve with a mechanical delay on return to closed position. This will open easily when the pressure is too high, but not close until the pressure is much lower than it is before the valve opens.
You need to let the valve open easily, but use a break on its way to close.
This site for example have something you might need:
http://www.generant.com/relief-valve.shtml

X

  • Newbie
  • *
  • Posts: 2