Free Energy | searching for free energy and discussing free energy

Mechanical free energy devices => mechanic => Topic started by: johnnymx on September 09, 2011, 04:14:52 AM

Title: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: johnnymx on September 09, 2011, 04:14:52 AM
somebody knows or buy plans from www.witts.ws/learn (http://www.witts.ws/learn) somebody know if they are a scam?
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: Pirate88179 on September 09, 2011, 01:36:23 PM
In my humble opinion....scam.  They charge you just to ask questions about it.  Plus, they are still on the grid over there, why would that be if they have all of this free energy?

Bill
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: lhakvoort on May 11, 2012, 05:33:27 PM
i think its a fake i talked to them and the only thing they are interested in is money becouse they keep asking for it with nothing in return for it

Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: ruin41 on May 12, 2012, 04:04:30 AM
Its far harder to get 1 watt over your input expenditure than it seems to be to part fools from their money. If they cant show the small scale extra watt where does the the 40000 watts come from.
Garry
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: dxer_87 on May 12, 2012, 12:59:22 PM
Even for me, who don't know much language, this site is a place to cheat innocent researchers. It's enough to look for the unconventional healing methods that they presents saying it's about Holy Spirit. The brain is getting hot when you read that quantum energy will both give you electrcity and heal you. Similar problem is on the Keelynet.com, which propose another strange unconventional methods of healing and that stinks from far away. I'm very happy that members of this forum are aware of fakes. A special forum place for fakes description would be fine.
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: NTesla on May 13, 2012, 11:03:50 AM
I bought plans from Witts a few years ago based on a 'donate some money get a mystery free energy device plan'. The plans were for the M.E.G and lacked alot of information - certainly not enough information to build one yourself, instead they referenced Naudin's site. I was very disappointed. I had attempted a M.E.G replication earlier and have never come across anything conclusive that it is an OU device.

The fact that they have not open sourced their alleged free energy devices and instead keep saying they need money to build a factory explains it all.
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: hartiberlin on May 30, 2015, 06:35:12 PM
Yes, it seems to be scam.
I now made a video explaining how Thimothy Trapp (Trap) probably faked his machine and
I explain with a block diagram all the parts and show, how he ran the machine.
As this video was an inspired model for the creation of the QEG saga and Robitaille and
Hopegirl started probably a donation scam out of the rebuild not selfrunning Witts machine
and got over 100.000 US$ from people who donated for these "open source"
plans, it is a shame that it all started by this probably faked machine from Witts.ws.
So here I wanted to show how they have done it.
It is pretty obvious, if you see the circuit diagram and watch my video.

It is a shame that so much money was wasted and only cashed in by these people and
this all falls back to the serious truthfull free energy researcher, who makes his experiments
on a shoestring budget and is affected by these people for the bad public opinion that is
left behind these nonworking devices and throws down the whole free energy research scene.

So we really have to expose scammers and not let them do their scams as it affects us all...
No wonder normal physics still calls us fringe science...

Link for the english Version:
http://youtu.be/Y1BInIh_mRQ

Alright, here attached is the block diagram and here is the Youtube Video about it.

http://youtu.be/Y1BInIh_mRQ (http://youtu.be/Y1BInIh_mRQ)
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: Pirate88179 on May 30, 2015, 08:55:08 PM
Yes, it seems to be scam.
I now made a video explaining how Thimothy Trapp (Trap) probably faked his machine and
I explain with a block diagram all the parts and show, how he ran the machine.
As this video was an inspired model for the creation of the QEG saga and Robitaille and
Hopegirl started probably a donation scam out of the rebuild not selfrunning Witts machine
and got over 100.000 US$ from people who donated for these "open source"
plans, it is a shame that it all started by this probably faked machine from Witts.ws.
So here I wanted to show how they have done it.
It is pretty obvious, if you see the circuit diagram and watch my video.

It is a shame that so much money was wasted and only cashed in by these people and
this all falls back to the serious truthfull free energy researcher, who makes his experiments
on a shoestring budget and is affected by these people for the bad public opinion that is
left behind these nonworking devices and throws down the whole free energy research scene.

So we really have to expose scammers and not let them do their scams as it affects us all...
No wonder normal physics still calls us fringe science...

Link for the english Version:
http://youtu.be/Y1BInIh_mRQ (http://youtu.be/Y1BInIh_mRQ)

Alright, here attached is the block diagram and here is the Youtube Video about it.

http://youtu.be/Y1BInIh_mRQ (http://youtu.be/Y1BInIh_mRQ)

Stefan:

This is great.  You have done a great service to all that really attempt to find free energy.  These scammers give all of us a bad name and
we all get bunched in with them with folks that do not know the history and the facts.

All of these type of folks need to be exposed for what they are.  This makes me mad.  Ripping people off is a crime and all of them should go to jail.

Thank you for doing this,

Bill
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: memoryman on May 30, 2015, 09:01:44 PM
Stefan, what is your official take on the Rosch thingy? I am 110% (yes, OU) sure that it is a very elaborate scam.
Stuart Campbell is calling you a crybaby on PESN for not going to the 'demo'
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: hartiberlin on May 31, 2015, 01:15:12 AM
@Bill,
yes, exactly !
It also makes me mad, when I see, how also at Gaia they still try to make a QEG to work
and spend big amounts of money for it and all the other QEG groups too !
We really have to expose these scammers !

@memoryman
why should I visit Rosch, when they are not showing
any real start and stops and are not allowing real measurements ?

By the way, Hopegirl is again at it scamming people via
donations, Here are her newest fundraisers...
https://fundrazr.com/campaigns/5sLS9/ab/5440C3
http://www.gofundme.com/QEGRosettaStone

Don´t donate there... Please save your money or donate it to
more useful things where people are really in need !

Many thanks.
Regards, Stefan.

Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: memoryman on May 31, 2015, 02:43:38 AM
Stefan, on PESN I have been expressing my view (as ngepro) that there was no reason for you to go and Stuart is not liking it.
Btw, with the unqualified  'team' going is a Dan Glover; he was John Rohner's spokesman in 2012. Look him up.
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: MarkE on May 31, 2015, 02:54:24 AM
Stefan, on PESN I have been expressing my view (as ngepro) that there was no reason for you to go and Stuart is not liking it.
Btw, with the unqualified  'team' going is a Dan Glover; he was John Rohner's spokesman in 2012. Look him up.
Really, Dan Glover who promoted the plasma engine he never saw work at: Tesla Tech 2012, Power Gen 2012, and CES 2013 is going?  His background is: he graduated law school, and worked in web design.
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: memoryman on May 31, 2015, 03:02:04 AM
Yes, THAT Dan Glover. (Con)fidence inspiring?
Entourage

The following individuals plan to be involved in the PES entourage.
Sterling D. Allan - Me, PES Network, Inc.
Stuart Campbell - my associate here at PES
Gowtham - from India, has professional experience in the assessment and measurement of electrical output, on behalf of PES.

Jay Pavasia - of Jeruz Energy, which has helped roll out MagneGas successfully in India, among other things. (Interested in introducing Rosch's KPP to India)
Dan Glover - Jay's associate; from Nevada, USA

Ronny Korsberg - Oslo Norway, purchased 5 kW AuKW for his home
J.D. - from The Netherlands, Global BEM

John Broberg - Of Vision Lighting, from Santa Clara, California, USA; interested in bringing to US market, starting with a local 5 MW desalination plant
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: MarkE on May 31, 2015, 05:11:34 AM
Yes, THAT Dan Glover. (Con)fidence inspiring?
Entourage

The following individuals plan to be involved in the PES entourage.
Sterling D. Allan - Me, PES Network, Inc.
Stuart Campbell - my associate here at PES
Gowtham - from India, has professional experience in the assessment and measurement of electrical output, on behalf of PES.

Jay Pavasia - of Jeruz Energy, which has helped roll out MagneGas successfully in India, among other things. (Interested in introducing Rosch's KPP to India)
Dan Glover - Jay's associate; from Nevada, USA

Ronny Korsberg - Oslo Norway, purchased 5 kW AuKW for his home
J.D. - from The Netherlands, Global BEM

John Broberg - Of Vision Lighting, from Santa Clara, California, USA; interested in bringing to US market, starting with a local 5 MW desalination plant
Is there anyone amongst them who understand that gravity is conservative?
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: EJ2090 on August 15, 2015, 04:40:52 PM

Hi, I like you on the free energy systems research would you please give full information about the system Chess Chmp Bell.
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: lamare on January 10, 2017, 08:23:48 PM
Hi guys,

Do you know what this thing is??

It sure looks a lot like Ron Brandt's "Ecklin Variable Reluctance Generator". See page 14 in this pdf:

http://www.tuks.nl/pdf/Reference_Material/Extraordinary-Science-Issue-4-1994.pdf (http://www.tuks.nl/pdf/Reference_Material/Extraordinary-Science-Issue-4-1994.pdf)

I've watched these video's, which contain a presentation by Ron Brandt with his motor:
https://www.youtube.com/channel/UCf0jsaq874m-byUpNTRZcTg (https://www.youtube.com/channel/UCf0jsaq874m-byUpNTRZcTg)

Ron talks about this Ecklin device, about which you can find more here:
http://www.rexresearch.com/ecklin/ecklin.htm (http://www.rexresearch.com/ecklin/ecklin.htm)

His Ecklin device seems to have been his first prototype, which eventually led to his PermMag motor, of which they've made the plans available on Google drive just months ago:
http://www.bestenergy.ws/FreeRonBrandtPlans.html (http://www.bestenergy.ws/FreeRonBrandtPlans.html)

From the conversations about Ron, it does seem that these guys have been in contact with him. Also, they have photo's of his workshop and other things, and the plans do seem to match what Ron showed in the 1995 conference.

Interestingly, there are no photographs with a properly wound PermMag motor stator.

From what I make of it, this is essentially "magnetic flux switching" technology:
https://en.wikipedia.org/wiki/Flux_switching_alternator (https://en.wikipedia.org/wiki/Flux_switching_alternator)

This is the same principle as has been patented as the "MEG" by a/o Tom Bearden. His colleagues posted a very interesting video, explaining how they got to the MEG design and how "flux switching" works:
https://youtu.be/no50_5iSr2Y (https://youtu.be/no50_5iSr2Y)

So, it seems these guys do have at least Ron's "Ecklin Variable Reluctance Generator" in their possession, but they don't appear to have a working PermMag motor, cause they don't know how to wind and control it. It seems Ron was the only one who actually understood how to get the PermMag motor running, so the plans are pretty much useless to anyone who does not understand how magnetic flux switching works and what that can do.

If I counted correctly, there's 3 stator pins+coils for every magnet. In order to get the motor to spin, you just need to pulse a coil at the edge of a magnet on the rotor, which will cause the magnetic flux to switch trough that coil, which will give you torque. So, I would say a coil needs to be wound around every stator pin, and only one out of 3 is pulsed at a time, while at the other two you can collect BEMF power....
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: casstete on January 11, 2017, 12:15:35 PM
WITTS is a bunch of wanker SCAMERS ,

Thieving people , but consider that the NWO aka IllumiNAZI's r controlling all the sciences including alternative energy .


Prof Keshe released all his info and recenty with FBI busted a Pedophile ring of 70 000 members ... whos webmaster was

ALAN STERLING !!

Another free energy SCAMMER ! & NOW convicted Pedophile .

The Pedophile Elite runs Free Energy world as well as everything else .

Just build the real Lenzless tech and you CAN ALWAYS RECOGNISE IT


Lie so  :   If there is a source - motor/generator - Load it ALLWAYS goes down like this

Without load its innefficiant ( looks useless )

Add a load and motor spins faster + input energy from source drops drastically !

Same device is now Overunity where without a load OR with a load NOT USING ALL POTENTIAL POWER

it will look useless !

Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: lamare on January 12, 2017, 01:00:01 PM
I think I pretty much figured this stuff out and understand what it needed to make this work: a permanent magnet.

See my posts here: http://www.energeticforum.com/renewable-energy/16584-analysis-witts-generator-17.html#post297072
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: lamare on January 12, 2017, 01:48:10 PM

Ron Brandt was an early pioneer of brushless pulse width modulated DC electric motors, and generators.  He chose to use what is presently referred to as an outrunner topology.  His motor is common practice today, with one exception.  Ron was well aware of the necessity for properly recovering, and routing said recovered electrical energy generated in his motors.  This particular motor has nothing to do with the QEG. His failed attempts at getting the Ecklin generator to work motivated him to blaze his own path, a path which led him to make a few profound observations.  According to who you choose to believe, it was these observations (beknownst or unbeknownst to them) which inspired the unsubstantiated claims being disseminated by the leaders in the QEG community.


When you compare the image on page 14 of this pdf with the device demonstrated by Witts, it is clear that the device demonstrated by Witts IS Ron's "Eckliin" experimental prototype !!!

http://www.tuks.nl/pdf/Reference_Material/Extraordinary-Science-Issue-4-1994.pdf

In other words: the "self running 40 KW Fuelless Generator"  demonstrated by Witts has EVERYTHING to do with Ron Brandt's work, because it IS HIS ACTUAL EXPERIMENTAL PROTOTYPE of his Ecklin generator.

Just compare the picture of the "main frame" on the picture with Ron and the device demonstrated by Witss. There is no doubt this is his actual machine, they actually say so themselves on their website:

http://www.witts.ws/40kw-self-running-generator-qeg-help/

Quote
Our 40kw generator class for the above  demonstrated by its builder in this video posted by WITTS several years ago, is still available today. It was invented by former WITTS spokesmen Ronald Brandt and Nikola Tesla.

And no, he did not fail to get the Ecklin generator to work. He added something in order to make it work and he has been able to run it at a COP of about 1.05 (105%) efficiency, which is what he claims hilmself in the article above.

In his 1995 presentation, recently also released by WItts, he says that he had problems running his Ecklin motor/generator at high RPMs, because the magnets would rip of the rotor. That's why he designed a rotor whereby he placed the magnets within a cylinder, thus preventing the magnets flom flying out of the machine.

In other words: in order to get this first prototype working like his Perm-Mag motor and properly implement "flux switching" as a principle to obtain free energy out of the vacuum, one needs to design a proper rotor incorporating a magnet.

And yes, you can extract energy out of the vacuum using permanent static magnetic field, as has been documented by Prof. Turtur:

http://www.gsjournal.net/old/physics/turtur1e.pdf

If this motor is "common practice today", I'd like to see a link and check it out for myself. You see, as far as I'm aware, COP>1 motors are not exactly common practice today.....








Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: lamare on January 12, 2017, 01:55:57 PM

He chose to use what is presently referred to as an outrunner topology.  His motor is common practice today, with one exception.  Ron was well aware of the necessity for properly recovering, and routing said recovered electrical energy generated in his motors. 

There's one additonal exception. When I look for outrunner topology, I find this in WP:

https://en.wikipedia.org/wiki/Brushless_DC_electric_motor

The additional difference is that the common practice implementation uses one permanent magnet, while Ron's design uses a lot of magnets, about 1 for every three stator poles. In his design, there are 50 stator poles and therefore 16 magnets.

This allows for "flux switching", as is being done in the MEG. I highly recommend watching this video by Lee Kenny, one of the inventors of the MEG, which shows you exactly how magnetic flux switching works and how they got to the current design of the MEG:
 
 https://youtu.be/no50_5iSr2Y (http://www.energeticforum.com/redirect-to/?redirect=https%3A%2F%2Fyoutu.be%2Fno50_5iSr2Y)
 
Regards,

Arend.

Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: lamare on January 13, 2017, 04:35:45 PM

I have been looking at this and other tech for years, this is how I see things, how I see things isn't subject to change anytime soon because I am not only speculating on the subject, I am actively pursuing the subject on the bench. 

Well, if Ron did achieve a COP >> 1 with these kinds of motors, we should be able to figure out how this worked and why.   

I'm more of an analyst and theory guy and studied quite a lot on the subject of free energy and aether theory, but perhaps we can come to some conclusions.

I've posted a new thread at energeticforum with what I found out so far:
http://www.energeticforum.com/renewable-energy/20682-ron-brandts-perm-mag-qeg-meg-magnetic-flux-switching-explained.html

Ron's plans for his Perm-Mag motor have recently been released:
http://www.bestenergy.ws/FreeRonBrandtPlans.html

With respect to "flux switching", I highly recommend watching this video by Lee Kenny, one of the inventors of the MEG, which shows you exactly how magnetic flux switching works and how they got to the current design of the MEG:
https://youtu.be/no50_5iSr2Y

What is important in the simple experiment they show, is that the flux has a preferred path. There's one strong path and one weak path. Further, it is also important to realize that a magnetic field is actually a *vortex* in the aether, which enables you to visualise in your head what is going on in such a motor, although that is not what Kenny talks about.

Further, Ron made a presentation in 1995 about his Perm-Mag motor, which can be found at vimeo as part of Witts video discussions, and also at YouTube with Ron's presentation and only a few minutes of extra talk:

https://www.youtube.com/channel/UCf0jsaq874m-byUpNTRZcTg

Quote
With that being said, Brandt had two signature technologies.  The first being his Perm-mag motor, a brushless BLDC motor which capitalizes on the out runner construction, a design which is commonly referred to as hub motor.  He states that he used the external rotor format for two specific reasons.  The first being in this style of rotor, centrifugal force keeps the magnets in the rotor, and second, leverage. The out runner example you site is weak.  Out runner or "hub motors" are being built with any number of magnets in the rotor. 


On the page describing the release of Ron's plans, it says, after referring to Joseph Newmann's motor:

Quote
Ron Brandt then went the next step further using electronic switching and because the magnets flew off the rotor at higher speeds and when the motor got hot, designed the motor with the magnets rotating on the inside of a tube with the windings being on the inside. There was several hundred thousand dollars spent. [...] Back in 1998 a Chinese company was given the information on his basic motor which started the manufacturing of his motor design around the world but not including the overunity controller as far as I am aware.

Ron originally came up the design of the magnets on the inside of a rotating tube after magnets would fly off of a central rotor at higher speeds due to centrifugal forces plus when they over heated weakening the glue. Ron Brandt met with some Chinese in 1998 and gave them the details on the motor. That I believe was the start of those BLDC motors spreading out to the world today. I don’t think they got the controller details plus the controller has been upgraded with several hundred thousand dollars over 4 generations since 1998 to 2007. Now it has been upgraded to digitalized gerber files.

Ron was kind and generous in order to receive a very reasonable amount June 17, 2010 allowing me to photostat the machine drawings for the 10 hp (at 13,000 rpm yields 60 hp on a prony brake due to hp going up 4x for the rpm doubling approximately and 120 hp if the mirror is joined) & 40 hp (yielded 500 p on a prony braked at 8,000 rpm with the mirror joined) motors plus the latest 4rth generation of controller in order to be open sourced.

Ron says similar things in his presentation.

Cifta posted the following on the EF thread:

Quote
You have posted some interesting reading. I do have one correction to make if you don't mind. Almost all BLDC motors have the same number of magnets as the number of poles. The floppy drive motor "magnet" is actually a ceramic material that has been magnetized with alternating N and S poles.

So, the first question is: Is Cifta correct that there is a 1:1 match between the number of magnets in a BLDC rotor and the number of poles in the stator?

Because if that is true, then there is a significant difference with Ron's original design, which, if I counted correctly, has 3 stator poles for every magnet in the rotor.

So, you are correct in pointing to industry BLDC motors being very similar to Ron's Perm-Mag motor, but if there is a difference between the number of stator poles versus the number of magnets, that could very well be the essential difference between what Ron did and what's current practice in the industry, because if there's three stator poles for every magnet, the magnetic flux will naturally form a "strong" pole connection over the pole which is fully covered by the magnet, while the ones on the edges will form "weak" poles, because of the vortex nature of the magnetic field of a permanent magnet.

In other words: it seems to me that the 1:3 proportion of magnets to the number of stator poles is an *essential* element of Ron's design.

So, it would be nice if we could confirm Cifta's statement to be true, which would give at least another possible explanation for the performance of Ron's design which could then be experimentally investigated further.

Quote
Refer to Brandt's stator in his Perm-mag motor.
 
http://www.tuks.nl/img/Brandt_Stator_photo_600px.jpg
 
Now look at a present day hub motor stator.   Even the stator laminates are similar in cross section to those which Brandt used in his Perm-mag.  Scroll through the images in the provided link and see the rotor, appreciate the number of magnets versus stator poles, recognize the odd even ratio.  Recognize that what he did back then, is now the standard.   He even informs us that his motors were three phase, again, today's standard.  I use the following link because of the individual's attention to detail, it's refreshing to see this do it yourselfer work towards the "desired"  practical application, showing two of these motors back to back serving as the drive train.
 
http://s37.photobucket.com/user/ripperton_2008/slideshow/Mira

Very nice photo's, indeed. I noted a picture of a single hall sensor, while on Ron's Perm-Mag motor there were three hall sensors. However, I couldn't find any detail regarding the number of magnet poles in the rotor.

I did find this document, though:
http://www.tuks.nl/pdf/Reference_Material/BLDC/brushlessdcmotorphasepoleslotconfigurations.pdf

From what I see there, it definitely does not appear to be common to have 3 stator poles for every magnet pole, which I believe would be required for for effective flux switching the way Ron did.


Quote
That which differentiates present day BLDC motors from Brandt technology is how the motors are controlled!  What he recuperated, we throw away.  How he recuperated is not made clear, what we do know is that his recuperation method strengthened his motors, and dramatically reduced unnecessary stress.

The schematic for the controller can be found at rexresearch:

http://www.rexresearch.com/brandt/

I will print it out and study, but let's consider the idea that there are (about) three stator poles for every magnet pole in the rotor.

First of all, as I said, a magnetic field should be considered to be a vortex. Consider this video to get an idea of how a magnetic field actually looks like:

http://www.youtube.com/watch?v=SAl1LVPbYhY

Don't mind what the guy says, just consider what you see here.

Ok, so suppose every magnet pole to have such a vortex going right trough the middle of the magnet, and that there is one stator pole which becomes the "strong" pole, while the other two are "weak". In this situation, you can switch the "strong" flux from the central stator pole to the next at the moment the magnet approaches, while you can harnass BEMF the center pole, while it becomes a "weak" pole, which causes the stator pole leaving the magnet to be already "weak" and thus not slows down the rotor.

Further, when you look at figure 1-D in the slotconfigurations pdf linked above, it seems that there are two closed magnetic paths for every magnet, because each has two neighbors. So, in the flux switching process, you not only have to consider which poles are "weak" or "strong", but also which "strong" stator pole connects to which "strong" stator pole on the neighboring magnet pole and how this is switched smoothly from one stator pole to the next. It feels natural to me that that a third pole in the middle can make the switching process much more gentle and controlled, but I may just as well be totally wrong here.

Quote
The PDF suggests that the energy to required to operate the machine didn't come from the supply, well....the demo illustrates otherwise.  Not only are you provided with specific numbers as they relate to the consumption of the motor, the cross section of the wires feeding the motor shatter any doubt regarding input.  His motors were superior to what we have today, not because of the design, it's clear that industry walks side by side with him as far as topology goes. 

Regarding the topology we clearly agree. However, I'm still questioning the number of magnetic poles vs. the number of stator poles. From what I saw in the pdf document linked above, it is not common to use three stator poles for every magnet pole, while my gut feeling tells me that is an important difference for establishing efficient flux switching.

Quote
His control method was superior to anything that is being suggested today. You suggest that there is a connection to the MEG, no such connection can be made to the Perm-mag, but can be made to his Variable reluctance generator.

The wonderful thing is we have the Perm-mag hardware exactly as he demonstrated, industry has perfected manufacture to a high degree. So high in fact that it is now possible for the do it yourselfer to fabricate such a motor from the comfort of home, ask anyone into RC motor construction.  We are oblivious (some more than others) to how his controller functioned.  There was a lot more going on than just supplying coils with pulses of current.  Find his controller, build it and marry it to the BLDC motors of today. 
 
His variation on the Ecklin machine is a completely different tech, and a completely different story.  A story which seamlessly marries flux switching and resonance.

His variation on the Ecklin machine WAS the machine which suffered from magnets flying off the rotor!  This machine is essentially the proof-of-concept version of the Perm-Mag motor and Ron says he could only do about 105%.efficiency with that exact same machine as has been demonstrated by Witts.

As said above, the schematics of the controller have been released recently, including PCB designs, etc.

Regards and thank you for the discussion,

Arend.
Title: Updated Machine Drawings and Controller Schematic
Post by: Busterzxcv on February 12, 2017, 01:49:18 AM
http://www.bestenergy.ws/FreeRonBrandtPlans.html  This has machine drawings updated to autocad and stp. Also the 4rth generation controller updated to gerber files with today's electronic parts including diodes that need to be less than 10 nanosecond response time.


The controller is critical for timing.


it is possible that today's bldc motors such as drone will work with the controller but needs to be verified.
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: Dog-One on February 12, 2017, 04:36:44 PM
Quote from: lamare
Regarding the topology we clearly agree. However, I'm still questioning the number of magnetic poles vs. the number of stator poles. From what I saw in the pdf document linked above, it is not common to use three stator poles for every magnet pole, while my gut feeling tells me that is an important difference for establishing efficient flux switching.

I would disagree.  Attached is an animated GIF.  Download it and view it in your browser.

These "outrunner" 3-phase brushless DC motors are commonly used in many of the lightweight model RC drones you see the kids playing with.  They are extremely powerful for their weight and are very conservative on energy usage.  Are they over-efficient?  I don't know.  Their design is much like Mr. Brandt was heading towards.  What I will say is by their very nature they have eliminated as much iron as possible, leaving just enough to produce the required amount of torque.

The preferred coil winding pattern is known as the dLRK-Evolution scheme, also attached.  If you want to get your hands dirty with these motors, go down to your local hobby shop and purchase a 12 stator, 14 pole outrunner and suitable controller.  You can rewind these motors during a lunch break and try as many scenarios as you want.  It's well worth your time.  Once you get into the swing of things, then add some hall sensors and begin looking at a customized controller where you can manipulate the bEMF any way you like.

I personally was not able to get such a motor into resonance as Mr. Brandt suggested.  At 20,000 RPM I'm still out of the ballpark.  I'm guessing the 40k to 60k RPM is the region where you would detect the onset of resonance.  This is probably a factor of the type of laminations used in the stator.  As Ron stated, the metal matters--what type and how much.

Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: stargate22 on February 11, 2018, 03:36:25 AM
 ;D 8)
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: odumy on February 12, 2018, 08:05:49 PM
what about this ???
Title: Re: Self Running 40kW (40,000 Watt) Fuelless Generator from witts.ws scam?
Post by: TinselKoala on February 12, 2018, 10:11:18 PM
what about this ???

Congratulations! You have just proved GIGO!

(Garbage In = Garbage Out)