Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Trawoeer Power Pyramid Version 12 - Electrical output from a homemade pyramid  (Read 542029 times)

duff

  • Sr. Member
  • ****
  • Posts: 298
Ben,

Thanks for the correction on the small tubing size. Guess I just wrote it down wrong...

Sorry your initial wind didn't work out. Copper  sure isn't getting any cheaper.

I intend to post my progress on the pyramid build. I'm doing some  thing different this time around and so far things are going much smoother, though still time consuming...

Maybe an update tomorrow with pics

BTW - where did you get the 1 1/4" to 3/8" copper reducing adaptor??


k4zep

  • Hero Member
  • *****
  • Posts: 650
Ben,

Thanks for the correction on the small tubing size. Guess I just wrote it down wrong...

Sorry your initial wind didn't work out. Copper  sure isn't getting any cheaper.

I intend to post my progress on the pyramid build. I'm doing some  thing different this time around and so far things are going much smoother, though still time consuming...

Maybe an update tomorrow with pics

BTW - where did you get the 1 1/4" to 3/8" copper reducing adaptor??

Hi Duff,

Your right on the copper being expensive, should buy some CU stock.  I found some #16 solid TF 600VAC wire on Ebay, have a roll ordered, will take 3-4 days to get here probably from MO, USA.  What we really need is some SOLID 17.5KV insulated wire but if you can find it, it is worth a kings ransom for what we need internally to do the charging of the sand.  I'm going to put small silicon tubing around where the wire goes through the hole in the side to prevent galling of the wire next time.  Shesssss.  That #14 was stiff on a 3/8's tube.  If I'm lucky, that #16TF will hold up to about 2.5KV AC, I don't know how TT is doing his high voltage without breakdown.  Lots to look at there.

I made my adapters.  Used a 1 1/4 copper end cap, drilled and reamed to snug fit to outside of inner tube, then cut a 3/8 coupling in half and drilled out the slight ridge in the middle. I will solder it to the end cap tomorrow using a wooden dowel to hold it in alignment while I solder, then clean up and that will be it.  Too hot and rainy and I have to go outside to do that, wife would run me out of cond if I did large soldering with acid core in condo!   See two pictures.  I couldn't find any of those adapters that TT used here locally and I like to putter, so ordered CU from McMaster-Carr......Fast quick service.  Expensive though!  Anybody need a roll of #14Thhn cheap?

AbbaRue

  • Hero Member
  • *****
  • Posts: 587
@k4zep looks like you did the same thing as me making your own reducer
from a pipe cap. and a 3/8 pipe joiner. 
To keep from damaging my wire feeding it through the hole:
I placed a small piece of a plastic straw in the hole, with a slit down the side to adjust it for the hole. 

lanenal

  • Full Member
  • ***
  • Posts: 140
I've built several circuits including one using 400 volt capacitors. I am in the process of replicating the Danish developer device. My point is that it needs improving to get it to TUNE in to higher frequencies. Tesla hinted at tuning in to the "wheelwork of nature".
The reason I replied to this thread is that a lot of replicators didn't get anything with the pyramid device.  Not even a milliamp. P Kelly covers a pyramid patent in his free pdf book. I'm sure there's something in pyramids as they work on razor blades etc. It's just not for me.
Incidentally, I was using the Danish developers plate device to pick up radiant energy from  a usb plasma ball device. My meters were reading hardly any micro amps so I just left it for a couple of hours. I then carelessly touched the output wires and received a burn. I then powered a 20 watt unmodified CFL for a full 4 seconds at full brightness!  It taught me not to trust my meters. The Danish developer circuit can stand a lot of variations. I built one circuit from two cfl light bulb components for instance. So the circuit is a very useful one indeed. If you leave it on it's own it will even self charge the capacitors. I'm sure it will charge a super cap over a week or so with just a short aerial. The circuit can scavenge energy from just about anything.  Even the static from the front of a tv tube. But it is free energy and is perfect for experimenting with the  extraction  of energy from the earth as well as the air. I even used it to extract back emf from a pulsed electric motor. Hope this helps. Cheers.

@a.king21: that's fantastic -- so simple (like a joule thief project), almost everybody can give it a shot! I will try to get some thick aluminum wire (much cheaper than copper wires) and do a preliminary test soon. Thanks for sharing your encouraging results!

SchubertReijiMaigo

  • Sr. Member
  • ****
  • Posts: 343
Interesting device, but need some test to prove is OU:
Put the pyramid into a Faraday cage and see the output, I'am skeptic here.
I hope he is not just collecting the ambient RF waves which is not FE and overunity of course...

neptune

  • Hero Member
  • *****
  • Posts: 1127
When you drill the hole in the inner copper tube for the wire to go through , do the following . After the drill goes through , just lean your drill 45 degees towards the end of the tube . That will de-burr it where it matters .

k4zep

  • Hero Member
  • *****
  • Posts: 650
When you drill the hole in the inner copper tube for the wire to go through , do the following . After the drill goes through , just lean your drill 45 degees towards the end of the tube . That will de-burr it where it matters .

Hi Neptune,

Thanks, good idea!!!!!

Ben K4ZEP

duff

  • Sr. Member
  • ****
  • Posts: 298
All,

I have found that by using a floor flang on a 3/4" plywood construction base really makes fiting the apex diagonals a lot easier. I cut strips of plexiglass and used my hand grinder to make thin wedges and used them to adust the tilt of the center pipe assembly so it was perfectly centered and straight at the top where the apex comes together.

What I've done with the center pipe is used 1/2" pipe for support and placed a short piece of 3/8" pipe on top of it. That way I'll weld the diagonal members to the 3/8" pipe and simply detach the supporting pipe below it when I'm finished. The 3/8" pipe is a little longer on the top side than I need but I'll trim that after the welding is complete.

I've shown the diagonals taped against the center pole but they are not cut yet. Here's were I'm stuck at the moment.

I've layed everything out in Google SketchUp and installed plugins to unfold the 3D images but am unable to print them because I'm running SketchUp under Wine (been running linux since '96). Wine has problems and preventing me from printing or exprorting to an image....

So I'm trying to get this worked out --  really want to make templates to use for cutting the diagonals ends.

AbbaRue

  • Hero Member
  • *****
  • Posts: 587
Since we don't know for sure were the energy in the pyramid is coming from,
I thouught the following website might give us more insight. 
The following website contains detailed info on different types of waves:

http://www.ndt-ed.org/EducationResources/CommunityCollege/Ultrasonics/Physics/wavepropagation.htm

Since quartz is piezoelectric, ultrasonics might explain were the energy is coming from. 

k4zep

  • Hero Member
  • *****
  • Posts: 650
All,

I have found that by using a floor flang on a 3/4" plywood construction base really makes fiting the apex diagonals a lot easier. I cut strips of plexiglass and used my hand grinder to make thin wedges and used them to adust the tilt of the center pipe assembly so it was perfectly centered and straight at the top where the apex comes together.

What I've done with the center pipe is used 1/2" pipe for support and placed a short piece of 3/8" pipe on top of it. That way I'll weld the diagonal members to the 3/8" pipe and simply detach the supporting pipe below it when I'm finished. The 3/8" pipe is a little longer on the top side than I need but I'll trim that after the welding is complete.

I've shown the diagonals taped against the center pole but they are not cut yet. Here's were I'm stuck at the moment.

I've layed everything out in Google SketchUp and installed plugins to unfold the 3D images but am unable to print them because I'm running SketchUp under Wine (been running linux since '96). Wine has problems and preventing me from printing or exprorting to an image....

So I'm trying to get this worked out --  really want to make templates to use for cutting the diagonals ends.

Hi Duff,

Darn good work!  Lots of thought!  Oh if I had that much room to work in!!!! 

Respectfully
Ben K4ZEP

Freezer

  • Sr. Member
  • ****
  • Posts: 414
Nice work duff and Kazep.  Have you guys found a spot that you will use the pyramid in?, as in using the dousing rods?

I roughly modeled the pyramid frame last time trawoger was here, not sure if it will help anyone.  It basically tells you the angles for a 1000mm frame.

http://img86.imageshack.us/img86/6636/3dvon3.jpg
http://img148.imageshack.us/img148/9339/sidevdy6.jpg
http://img526.imageshack.us/img526/433/tctq8.jpg
http://img148.imageshack.us/img148/1061/bctq2.jpg

I could model the inner part if I had all the specs, I'll have to go through the video again.  Anyways good luck in your builds.

k4zep

  • Hero Member
  • *****
  • Posts: 650
Nice work duff and Kazep.  Have you guys found a spot that you will use the pyramid in?, as in using the dousing rods?

I roughly modeled the pyramid frame last time trawoger was here, not sure if it will help anyone.  It basically tells you the angles for a 1000mm frame.

http://img86.imageshack.us/img86/6636/3dvon3.jpg
http://img148.imageshack.us/img148/9339/sidevdy6.jpg
http://img526.imageshack.us/img526/433/tctq8.jpg
http://img148.imageshack.us/img148/1061/bctq2.jpg

I could model the inner part if I had all the specs, I'll have to go through the video again.  Anyways good luck in your builds.

Thanks for the good wishes and info!  We need all the help we can get.  I haven't gotten out the ol dousing rods yet, but will soon
just for the fun of it.  In my youth was a heck of a dowser.............Wire will be here on the 14th.....so in holding pattern, might look at my pyramid tomorrow.......see how I can make it portable.....

Respectfully,

Ben K4ZEP

duff

  • Sr. Member
  • ****
  • Posts: 298
Below is an excerpt from  a lengthy post by Laborator on the German forum.

It sure would be nice if someone would actually translate some of this. There appears to be some rather interesting posts but I can only get bits and pieces with the translator...

http://www.overunity.de /index.php?PHPSESSID=0b23f432d1584a875fdbdf378f99b2bf&topic=1169.msg23091#msg23091

Quote
Thesis:
The ever-existing corona discharge of our planet are the actual source of energy and thus the driving force behind the pyramid of energy. The corona discharges are distributed around the globe are constantly in motion and form, depending on Platentektonik, metal content and soil moisture and salinity in the earth's true birthplace of corona discharges.

The corona discharges are able, through means of  on-metallic clad pyramid through the center of the mirror, preferably quartz sand or quartz crystal in the longitudinal axis to bring in vibration and piezoelectric crystals to stimulate the release of energy with a certain frequency.

To generate a continuous piezoelectricity, the quartz crystal in a capacitor discharge. So now is always enough space in the condenser is present, a DC motor with multi-segmented commutator continuously connected as a consumer.
Only one such engine, with its pulse modes of consumption are the quartz crystal can unload, and store the energy in the capacitor. The engine itself can not utilize the piezoelectricity is directly dependent on the temporarily stored energy from the capacitor.

Other consumers can be connected only to the maximum capacity of the condenser. The consumer can only consume as much energy as it is generated in the crystal at the same time!
Thesis end


k4zep

  • Hero Member
  • *****
  • Posts: 650

Below is an excerpt from  a lengthy post by Laborator on the German forum.

It sure would be nice if someone would actually translate some of this. There appears to be some rather interesting posts but I can only get bits and pieces with the translator...

http://www.overunity.de /index.php?PHPSESSID=0b23f432d1584a875fdbdf378f99b2bf&topic=1169.msg23091#msg23091


[/quote]

I'll try and paraphrase:

The ever-existing corona discharge of our planet is the actual source of energy and thus the driving force behind the pyramid  energy device/system. The corona discharges are distributed around the globe are constantly in motion and form, depending on the tectonic plates, metal content, soil moisture and salinity of the earth's true birthplace of corona discharges.

The corona discharges are able, through means of the  non-metallic/mineral clad pyramid with the reactor at the focal point of the pyramid are able to resonate the piezoelectric crystals within the reactor and stimulate the release of energy with/at a certain frequency.

To generate a continuous DC voltage by the piezoelectric effect,  the quartz crystal or sand is built into a capacitor. The amount of capacitance is enough to power a DC motor with  a multi-segmented commutator which also acts as a pulsar to modulate the quartz and
keep it in a operational mode. This pulse modes is essential for the device to operate.  The constant charging and pulse discharging of the Capacitor keeps a minimum amount of energy in the capacitor and allows more energy to be stored and available for use in that device.  The electric motor itself can not utilize the  high impedance/high voltage produced via the piezoelectric effect and produced by the crystals/sand elements within the reactor, but is  down converted to a lower level of DC available in the Capacitance conversion process (many little capacitors being paralleled and dumped into a larger capacitor) and is directly dependent on the temporarily stored energy from the capacitor.

Other loads can be connected only to the maximum capacity of the condenser/crystal piezoelectric process. The loads can only consume as much energy as it is generated in the crystal and converted to usable DC voltage at any given time. IF the load is greater than the device can produce, it will essentially short out the crystal matrix and cease to operate until the crystal/sand is recharged.

Thats my take on it....

Ben K4ZEP
   

NickZ

  • Hero Member
  • *****
  • Posts: 5225
   All:
   If I may, I would like to state a different idea as to of why any pyramid, cone, dome, or sphere have power.  As all are energy generating structures.
   The corona discharges are not the cause of the effects, anymore than a cloud is the cause of lighting.  The cause is due to the Earths Vortex and its attributed energies, the Aether.  which you neither see nor is detectable by any instrument made, so far.
  Since you are able to SEE things like the northern lights and other corona type discharges you have erroneously attributed them as the cause of the energy found on Earth as well as inside the energetic foam structures mentioned above. But,  that is not correct. 
  The Earths Vortex is what created the planet, and not the other way around. It keeps the Earth revolving as it is an open vortex, unlike the moon which does not spin (closed vortex).  The master or Sun's Vortex along with the Earths Vortex produces all the different types of energies, such as light, heat, as well as all forms of electromagnetic, and non electromagnet energies that are found here on the planet as well as in space within our solar system.  IT is the cause of all forms of visible energy as well as dark matter.  It is this universal energy also erroneously called "gravity" on our planet, that holds the Earth together as a globe, affects our tides, and makes for the changing of the seasons.  So called "gravity" is not a pull to the center, but a push instead, from the outer towards the innermost part of our planet, and out through both north and south poles.  It is this force, the force of the Earths Vortex that is responsible for the increased activity and further concentration of energy in pyramids.  PYRA-MID  meaning fire in the center. 
  In the case of small models like we are working with here, the piezoelectric effect is also not the cause of the additional energy. But rather it is again the pyramids vortex invisibly spiraling inside the structure that is causing the charging, activation and effect generation of the capacitor, to separate the negative from the positive charges, thus adding ions or charge to the quartz or sand crystals placed at the focal point of this energy form structure.  Similar to a thunderhead, which when reaching a saturation point, releases some stored up and condensed energy in the form of lighting, which is then dissipated and absorbed by any negative ground.   
  Similar to how a magnifying glass can focus enough energy on one spot hot enough to burn organic matter. In a like manner the pyramid produces, or manufacture its own energy from the surrounding Aether and focuses it, by its own vortexial power,  toward the center and out through the corners and top of the structure.
 
   I know that many will not agree with this "VORTEX THEORY",  but after spending half my life inside of pyramids,  as well as being surrounded by quartz crystals, this is what I've learned to be the truth.
                         NickZ