Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Crude looping setup  (Read 10725 times)

penno64

  • Sr. Member
  • ****
  • Posts: 457
Crude looping setup
« on: May 08, 2011, 02:14:01 AM »
Hi all,

Would someone be kind enought to replicate this test.

You will require -

A "smart" charger
12v Car battery
25watt Incandescent light bulb
600watt 12v inverter

The test :

I charged the "OLD" car battery from mains power
Let it rest overnight - measured voltage 12.7
Connected the 600watt inverter with light and charger - down to 12.3
Switched on the "SMART" charger and selected 2amp charge - voltage stabilises at 12.10

Has now been running six hours  - battery voltage steady at 12.10
                                              and charge rate fluctuates between 1.9 and 2.0 amps

Comments appreciated

Is all we really need a "SMART" charger ?

Kindest Regards, Penno

gotoluc

  • elite_member
  • Hero Member
  • ******
  • Posts: 3096
Re: Crude looping setup
« Reply #1 on: May 14, 2011, 07:34:55 PM »
Hi Penno,

thanks for sharing your experiment.

I was wondering if your battery in your setup is still maintaining 12.10 vdc?

If not, what was the total amout of hours it was able to maintain 12.10 vdc?

Thanks

Luc

e2matrix

  • Hero Member
  • *****
  • Posts: 1956
Re: Crude looping setup
« Reply #2 on: May 15, 2011, 05:03:58 AM »
Which 'smart charger' are you using?  If I understand correctly you are running an inverter off the battery and have the charger running from the inverter charging back to the battery.  And in addition have a 25 watt bulb running?  Big car batteries have a lot of wattage available and it can take a long time to get below around 12 volts.  But if it runs this way for a week or more straight than I'm thinking you may have something interesting. 

forest

  • Hero Member
  • *****
  • Posts: 4076
Re: Crude looping setup
« Reply #3 on: May 15, 2011, 11:04:50 AM »
how is bulb connected ? parallel to charger or in series ?

FatBird

  • Hero Member
  • *****
  • Posts: 1178
Re: Crude looping setup
« Reply #4 on: May 15, 2011, 09:53:43 PM »
@ Penno,   Thank you for sharing your circuit.

Please try leaving your circuit on all night, because a 25 watt bulb is only a 2 Amp draw from the 12 V car battery.
Most car batteries can deliver 2 or 3 Amps for several hours without much change in voltage.

Please try letting it run all night & let us know what you find.

Thanks again,


.

DreamThinkBuild

  • Hero Member
  • *****
  • Posts: 574
Re: Crude looping setup
« Reply #5 on: May 15, 2011, 10:53:53 PM »
Hi Penno,

What is the wattage rating on the smart charger? Find the closest inverter to the wattage rating to reduce switching amps.

ibpointless2

  • Sr. Member
  • ****
  • Posts: 370
Re: Crude looping setup
« Reply #6 on: May 16, 2011, 04:34:06 AM »
I've tried it but I didn't have the 25 watt light bulb, figured it was not needed.

I used a 400Watt black and decker square wave inverter and a BatteryMinder smart charger that pulse charges when the battery is fully charged. I hooked it all up to feed back to the battery, the battery read 12.09 volts when everything was hooked up. The battery is a size 16 jet ski battery. It held at 12.09 for about 10 minutes until it went to 12.08 volts. It kept on dropping after that.

This for me doesn't not work, you have too many losses in the system. But It did seem to slow down the consumption of power being used doing it this way.

FatBird

  • Hero Member
  • *****
  • Posts: 1178
Re: Crude looping setup
« Reply #7 on: May 16, 2011, 10:38:51 PM »
Any further results Penno?


Thanks.