Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: 1 kW zero point energy @ Peswiki.com  (Read 62345 times)

LightRider

  • Full Member
  • ***
  • Posts: 155
Re: 1 kW zero point energy @ Peswiki.com
« Reply #15 on: February 11, 2011, 01:28:31 AM »
Here is a print screen of the source code.
LightRider

ps.: it remains the math... to see if the resonant frequency of 100Hz is good.

LightRider

  • Full Member
  • ***
  • Posts: 155
Re: 1 kW zero point energy @ Peswiki.com
« Reply #16 on: February 11, 2011, 02:26:12 AM »
L = 404000 uH (approximation)
C = 0.23 uF (from source code)

Freq = 522.11 Hz

LightRider

edit1: L = (0.394 * r^2 * N^2) / (9r + 10A)   (In Metric Units "cm")
edit2: Freq = 1 / (2*pi*sqrt(L*C))
edit3:
r = 0.045 m
N = 1600 turn
A = 0.01 m

edit4: "copper wire from which the coil is made has a cross section area of 1.0 mm2, which is not too much for an electric alternating current of  Imax = 18 Ampere in the peak"

Look at the table 18 Gage SWG (or 16 Gage AWG) = 1.17mm^2 @ 22 amp max (3.7 amp )

« Last Edit: February 11, 2011, 03:08:31 AM by LightRider »

LightRider

  • Full Member
  • ***
  • Posts: 155
Re: 1 kW zero point energy @ Peswiki.com
« Reply #17 on: February 11, 2011, 03:26:08 AM »
From "http://philica.com/display_article.php?article_id=219"
remark in "()" are from me...

"...We approach to the adjustment of the system parameters with all resistors being switched of (Ohm’s resistor and load resistor both being zero). Then we start the rotation of the magnet with a well defined number of revolutions per minute (6000 RPM). Under these conditions, we start to adjust the  electric LCR-oscillation-circuit to the same frequency as the rotation of the magnet has. At the beginning, the electrical circuit did not contain any energy. When the adjustment of the electrical oscillation-circuit is close enough to the frequency of the initial rotation, we have a state of the system, which can be understood as the double-resonance of the electrical and the mechanical parts. In this state, the system begins to build up classical energy by alone, and the new classical energy is coming from the zero-point reservoir.

As soon as we have found this point of operation, we can slowly introduce the Ohm’s resistance of the coil’s wire, in tiny steps, step by step, into the differential equations. But we have to perform very small steps for the enhancement of this Ohm’s resistance, and always to renew the adjustment the parameters of the electrical circuit (capacity, inductivity, number of coil’s windings) step by step, in order not to lose the state of operation, in which zero-point energy is gained. This procedure has to be done very carefully; otherwise we would lose the information about the good operation of the system. Step by step we learn how to operate the system in a way, that the power-gain from the zero-point-energy is large enough to support the complete coil (with its whole Ohm’s resistance) with power. Very carefully we give attention to the double-resonance in order not to lose it.

When this mode of operation is found, the rotor runs safe and reproducible with the system parameters we have found, to be a self-running engine...."

LightRider

Omnibus

  • elite_member
  • Hero Member
  • ******
  • Posts: 5330
Re: 1 kW zero point energy @ Peswiki.com
« Reply #18 on: February 11, 2011, 03:47:24 AM »
All this is well and good except for the zero point energy part. Just mentioning it in the text doesn't prove at all that the source of rotation is zero point energy. First things first -- has he actually achieved self-sustaining run? If yes, then this device has to be replicated without delay. Only replication of the self-sustaining run by independent parties may turn this into something worthwhile. We've seen way too many claims for self-sustaining devices that have never been proven to be so independently to take one more claim seriously. If he hasn't achieved self-sustaining run then very careful energy balance has to be done before attempts to explain theoretically (zpe shouldn't even be a candidate) something that hasn't even been proven to be OU.

LightRider

  • Full Member
  • ***
  • Posts: 155
Re: 1 kW zero point energy @ Peswiki.com
« Reply #19 on: February 11, 2011, 05:01:46 AM »
All this is well and good except for the zero point energy part. Just mentioning it in the text doesn't prove at all that the source of rotation is zero point energy. First things first -- has he actually achieved self-sustaining run? If yes, then this device has to be replicated without delay. Only replication of the self-sustaining run by independent parties may turn this into something worthwhile. We've seen way too many claims for self-sustaining devices that have never been proven to be so independently to take one more claim seriously. If he hasn't achieved self-sustaining run then very careful energy balance has to be done before attempts to explain theoretically (zpe shouldn't even be a candidate) something that hasn't even been proven to be OU.

This comme from "Professor Claus W. Turtur from the University of Applied Sciences in Germany".
"He is a highly regarded theoretician who proved zero-point energy conversion in a published paper" 

http://peswiki.com/index.php/OS:_Claus_W._Turtur:_Zero_Point_Energy_Converter_in_the_Kilowatt_Range

have you read his published paper ?
(It's theories, computer simulations and some small experiments... interesting)

LightRider

Omnibus

  • elite_member
  • Hero Member
  • ******
  • Posts: 5330
Re: 1 kW zero point energy @ Peswiki.com
« Reply #20 on: February 11, 2011, 05:53:58 AM »
I know but what matters is is this really a self-sustaining rig or not? The theory itself has underlying problems pertaining to the fundamental problems of quantum mechanics and therefore it isn't essential. Zero point energy does come about from QM but that doesn't mean it is physical. There are other effects coming out from QM which are outright non-physical as well. The experiment is of the essence in all these studies.

Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: 1 kW zero point energy @ Peswiki.com
« Reply #21 on: February 11, 2011, 09:48:47 AM »
All this is well and good except for the zero point energy part. Just mentioning it in the text doesn't prove at all that the source of rotation is zero point energy. First things first -- has he actually achieved self-sustaining run? If yes, then this device has to be replicated without delay. Only replication of the self-sustaining run by independent parties may turn this into something worthwhile. We've seen way too many claims for self-sustaining devices that have never been proven to be so independently to take one more claim seriously. If he hasn't achieved self-sustaining run then very careful energy balance has to be done before attempts to explain theoretically (zpe shouldn't even be a candidate) something that hasn't even been proven to be OU.
I can't agree more. Good points!

I do hope there is something into this "ZPE" device - even if it shouldn't be called ZPE at all.

I will try to understand the concept, and build a simple rig with the necessary components.

Vidar

LightRider

  • Full Member
  • ***
  • Posts: 155
Re: 1 kW zero point energy @ Peswiki.com
« Reply #22 on: February 11, 2011, 02:37:15 PM »
I know but what matters is is this really a self-sustaining rig or not? The theory itself has underlying problems pertaining to the fundamental problems of quantum mechanics and therefore it isn't essential. Zero point energy does come about from QM but that doesn't mean it is physical. There are other effects coming out from QM which are outright non-physical as well. The experiment is of the essence in all these studies.

I think what is really matters is to take concrete actions to contribute to this progress.
Words are words, used to develop a theory or even to analyze a theory.
What action have we made ourselves today to contribute to this progress? that's the question.

LightRider

DreamThinkBuild

  • Hero Member
  • *****
  • Posts: 574
Re: 1 kW zero point energy @ Peswiki.com
« Reply #23 on: February 11, 2011, 03:44:38 PM »
So far the part list to build is:

1 motor 6krpm (or high speed drill)
1 diametric ring magnet in center of coil attached to drill.
16 Awg wire
Variable Capacitor to tweak the sweet spot
Resistive load

Am I leaving any parts out?

Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: 1 kW zero point energy @ Peswiki.com
« Reply #24 on: February 11, 2011, 04:32:03 PM »
So far the part list to build is:

1 motor 6krpm (or high speed drill)
1 diametric ring magnet in center of coil attached to drill.
16 Awg wire
Variable Capacitor to tweak the sweet spot
Resistive load

Am I leaving any parts out?
It is easier to fine tune the coil I guess. Moving a piece of iron nearby a coil will change the inductance, and the resonant frequency.

Vidar

e2matrix

  • Hero Member
  • *****
  • Posts: 1956
Re: 1 kW zero point energy @ Peswiki.com
« Reply #25 on: February 11, 2011, 07:05:29 PM »
A quick thought for those needing variable capacitance.  This could apply here or any projects needing this.  Old Ham radio antenna tuners can sometimes be found for cheap.  They often contain one or two large variable caps as well as coils.  If you can get in the ballpark with a fixed cap and then put this variable tuner in line with it you may be able to more easily dial it right in.

LightRider

  • Full Member
  • ***
  • Posts: 155
Re: 1 kW zero point energy @ Peswiki.com
« Reply #26 on: February 12, 2011, 04:25:27 AM »
A quick thought for those needing variable capacitance.  This could apply here or any projects needing this.  Old Ham radio antenna tuners can sometimes be found for cheap.  They often contain one or two large variable caps as well as coils.  If you can get in the ballpark with a fixed cap and then put this variable tuner in line with it you may be able to more easily dial it right in.

like this?
LightRider

e2matrix

  • Hero Member
  • *****
  • Posts: 1956
Re: 1 kW zero point energy @ Peswiki.com
« Reply #27 on: February 12, 2011, 07:52:37 AM »
Nice.  Looks like that one is made for some fairly high power.  :D

Low-Q

  • Hero Member
  • *****
  • Posts: 2847
Re: 1 kW zero point energy @ Peswiki.com
« Reply #28 on: February 12, 2011, 10:12:41 AM »
Such open capacitors have very low value - maybe in the nano or pico farad range. It will change capacitance with temperature and humidity as the dielectrium are just an open space of air between the plates. These capacitors are designed for very high frequencies - in radio recievers, as an example.

broli

  • Hero Member
  • *****
  • Posts: 2245
Re: 1 kW zero point energy @ Peswiki.com
« Reply #29 on: February 12, 2011, 11:20:16 AM »
You could always place them in a solution of baking soda:

http://home.earthlink.net/~lenyr/varelec.htm