Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Selfrunning HHO system with 400 Watts additional output  (Read 371588 times)

Marshallin

  • Newbie
  • *
  • Posts: 32
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #450 on: June 15, 2014, 05:32:11 PM »
hydroxy needs the timng of the spark changed. advanced. With 2-stroke, you need to ignore one of the sparks, I believe.

N.B. For some electrolysers, staniless steel is essential for even adequate performance, and usually 316L is specified. do you have a recycling depot near you? They tend to collect metals separately and will have stainless steel. Scrapped commercial kitchen units are good, as is scrapped medical equipment

http://www.free-energy-info.co.uk
See Chapter 10.
.

With recycling depo is problem because of new law, they shout not give you anythnig. Stupid Czech republic laws .... they will scrap it anyway.
Last year i was trying to get few micowave over transformer from them, and only way how to do it was bribing staff with alcohol :D.

e2matrix

  • Hero Member
  • *****
  • Posts: 1956
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #451 on: June 15, 2014, 08:59:55 PM »
Big THANKS to Les Banki for all his extensive work on HHO!     For anyone concerned with noise from a generator there is a very simple and cheap solution many people don't know unless they have experienced it.   You simply build a wooden box with what is available - plywood or boards and then get some open face (or unfaced) fiberglass insulation.  I'd suggest R-30 and staple it to all the walls inside the box.   You will be amazed at the sound deadening properties of a box built like this.  As a rough guess I think you could probably get all the insulation for a project like this for around $20 depending on the size of your generator.  A very quick google check found 33 square feet of R30 for about $21. 

jauniaux

  • Newbie
  • *
  • Posts: 2
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #452 on: June 15, 2014, 09:30:29 PM »
Big THANKS to Les Banki for all his extensive work on HHO!     For anyone concerned with noise from a generator there is a very simple and cheap solution many people don't know unless they have experienced it.   You simply build a wooden box with what is available - plywood or boards and then get some open face (or unfaced) fiberglass insulation.  I'd suggest R-30 and staple it to all the walls inside the box.   You will be amazed at the sound deadening properties of a box built like this.  As a rough guess I think you could probably get all the insulation for a project like this for around $20 depending on the size of your generator.  A very quick google check found 33 square feet of R30 for about $21.
just be careful with the heat from the motor, but great idea

totoalas

  • Hero Member
  • *****
  • Posts: 656
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #453 on: June 16, 2014, 01:40:34 AM »
It would be a great help if the link info can be downloaded here in this thread for everyone to see.....  its been 3 years since I played with magnets and HHO   think   its time to make a good one now   thanks to LES
totoalas :)

Les Banki

  • Jr. Member
  • **
  • Posts: 82
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #454 on: June 16, 2014, 03:06:34 AM »
Hi guys,

Sorry for the confusion but thanks to the feedback from some of you I checked my Dropbox Folder and you seem to be right:
all the circuit diagrams are MISSING.

[Actually, an IT engineer friend from Canada (who is replicating this project) compiled and zipped that folder for me.
I am not blaming him for the omission but I obviously need to do everything myself!  (as I normally do!)]

So, for the time being, I will attach those missing circuit diagrams here but I need 2 posts to attach 14 diagrams.

Cheers,
Les Banki

Les Banki

  • Jr. Member
  • **
  • Posts: 82
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #455 on: June 16, 2014, 03:15:07 AM »
Hi guys,

Back again with the last two (2) diagrams with the .png extension.

I now have to fix my Dropbox folder! ;D

Cheers,
Les Banki

Les Banki

  • Jr. Member
  • **
  • Posts: 82
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #456 on: June 16, 2014, 08:32:38 AM »
OK guys,

Its all "fixed"!

The easiest way was simply to create an additional Dropbox Folder (and its 'checksum') which contains the 14 missing circuit diagram files.

That is what I have done and here is the link:

 http://goo.gl/8zY8Um

#md5#WFGPsch.zip#2014.06.16@12.58:54 3f00292dfc1a630f047b705e0dc6192d *WFGPsch.zip

Cheers,

Les Banki

Les Banki

  • Jr. Member
  • **
  • Posts: 82
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #457 on: June 16, 2014, 09:07:39 AM »
hydroxy needs the timng of the spark changed. advanced. With 2-stroke, you need to ignore one of the sparks, I believe.

N.B. For some electrolysers, staniless steel is essential for even adequate performance, and usually 316L is specified. do you have a recycling depot near you? They tend to collect metals separately and will have stainless steel. Scrapped commercial kitchen units are good, as is scrapped medical equipment

http://www.free-energy-info.co.uk
See Chapter 10.
.


Paul-R,


You are NOT doing the readers here any favors by making comments of this nature.


Therefore, I request that BEFORE you make further comments on this subject, PLEASE read at least some of my documents like "Ignition system for


small engines 2.....", HydrOxy-gen. 'cosed-loop' setup.doc and "Running series cell electrolysers on 50-60Hz AC power...."
as an absolute

minimum!


Thank you.


Cheers,

Les Banki





iflewmyown

  • Full Member
  • ***
  • Posts: 124
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #458 on: June 16, 2014, 10:45:40 AM »
Les, I know you have been at this a long time. Could you tell me what is the largest size engine that can be run (at full load) off your current size electrolyzer  continuously without over heating the electrolyzer?
Thank you
Garry

Les Banki

  • Jr. Member
  • **
  • Posts: 82
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #459 on: June 16, 2014, 12:01:35 PM »
Les, stainless steel is stupidly expensive in my country so i want use old small electrolyser.
Is not powerfull but is power effective ... i sending picture from my thesis. I just need better case for that. Defenetly is not in my power to build some large 140 plate electrolyser so far.

I am quite afraid from large volme of hydroxy gas, i dont want to "play" with it, till i will get some experience. And i dont have stanalone workshop ... i am living in small apartment.

Is posible to run two stroke engine on hydroxy (If i will add standalone lubrication system to it of course)? Or i need 4-stroke one?


Mashallin,

The pictures you have attached are nice but without gas output volume and power consumption figures those pictures don't mean anything.

Your electrolyser may not be able to run even a small engine. (but you can always try!)

Again and again I keep telling you to do some reading first.... 

You need to read at least a few of my documents before you do anything!

Those are:

Overview4.doc

Ignition system for small engines 2.doc

HyrOxy-gen. 'closed-loop' set-up.doc

Running series cell electrolysers on 50-60Hz AC power.doc



Here is some general info about my electrolyser design:

SS 316 plates, size 180 x 100 mm, 0.55 mm thick

They are placed in 0.6 mm wide, 5 mm deep grooves in 15 mm thick CLEAR Acrylic.

The distance between the center of the grooves is 3.5 mm.


The two end plates (where power is connected) are 100 x 90 mm, 2 mm thick.

6 mm diameter SS 316 bolts are welded to these end plates to connect power.


As for the cost of SS316:

A few months ago I bought 4 sheets of SS 316, 0.55 mm thick, size 1.2 m x 2.4 m (4' x 8' Imperial) for $50.00 each

(in Melbourne, Australia)

We get more than 150 plates (180 x 100 mm) out of one sheet, more than enough for one 140 cell electrolyser!

I  guess  the price could be similar in other countries.

That is all for now.

Cheers,

Les Banki


Marshallin

  • Newbie
  • *
  • Posts: 32
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #460 on: June 16, 2014, 12:42:31 PM »

Mashallin,

Again and again I keep telling you to do some reading first.... 



Hi,

Issue is that throught first reading i was not able found answers to my basic stupid questions. I will read it again at night. You write a lot of about timing and injecting, but for me are right now important two questions.

What motor is suitable for reworking and what motor are not? What motor systems are easies to rework?
How much HHO i will need to run it (no closed loop, at first i want just run it)? Is there any formula?

This small-one electrolyser produce aproximatly 1+ LPM HHO and was was powering it with 40w power supply. But in reality it consume less ...
There is still issue with large bubles, but i will order for it some ultrasonic tranducer to make buble flow more fluid, so i get rid of current spikes (big bouble mess up with capacity ... my cell si woking like water capactior). But looks like i will need to make new one anyway.
So this production is realy small if i compare it to yours. So no chance to run big motor. Thats why i was thinking about RC motor.

Paul-R

  • Hero Member
  • *****
  • Posts: 2086
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #461 on: June 16, 2014, 02:23:34 PM »

Paul-R,


You are NOT doing the readers here any favors by making comments of this nature.


Therefore, I request that BEFORE you make further comments on this subject, PLEASE read at least some of my documents like "Ignition system for


small engines 2.....", HydrOxy-gen. 'cosed-loop' setup.doc and "Running series cell electrolysers on 50-60Hz AC power...."
as an absolute

minimum!


Thank you.


Cheers,

Les Banki
The title of this thread is "self running hho system with 400 watts additional power", talking about the Anton cell.

It would seem that you should start a new thread for your ideas.

bitbo

  • Newbie
  • *
  • Posts: 30
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #462 on: June 16, 2014, 03:38:11 PM »

Here is some general info about my electrolyser design:
SS 316 plates, size 180 x 100 mm, 0.55 mm thick
They are placed in 0.6 mm wide, 5 mm deep grooves in 15 mm thick CLEAR Acrylic.
The distance between the center of the grooves is 3.5 mm.


Hello Les Banki!


Thanks a lot for sharing your results and details.
I would be interested in the layout/holes of your plates.
Do you have an image available.


How do you seal them - how do you seal the end plates?


Did you somewhere mention the pulse frequency which are sent to the plates?


Again Thanks
[size=78%]bitbo[/size]

mscoffman

  • Hero Member
  • *****
  • Posts: 1377
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #463 on: June 16, 2014, 08:24:08 PM »
Les,

I re-read this thead and at all of these design files. I am impressed with what you have done.

The overunity energy production it seems is either in the Electrolyser and/or The Ducar
Generator. In the generator it would vest as less mechanical effort required to produce a
given amount of electricity. If it's in the electrolyser it would vest as an over Faraday
amount of HydrOxy being generated per unit power.

a) The electrolyzer is very important, so people might want to purchase
it prebuilt. That way it is built exactly to specification, such as the
minimum/maximum fluid levels and the fluid delay constants.
Also final test could be carried out against an operating genset, so overunity
operation could be guaranteed from the factory. I feel this is important too
because it is a high voltage electrolyser. I believe it should be offered in the
7KW version only.  At 240VAC @ 10A and it's physically big.

b) 50Hz. is pretty much locked into your design by component values
in the control boards. I don't know if you've gone through to change
the components for 60Hz opperation? There is a 60Hz version of the
Ducar 9000 genset for $799US.

c) Modern Digital Inverter generators  have two "problems". The motor power need
is not precise that it requires phase control. The control board cannot make use of electrical
power signals for phase control. Most likely these already have oil presssure monitoring
and some sort CD ignition. Combined with sufficient voltage and frequency stability would
indicate a substantial change could be made to the control box.

The reason these digital inverter gensets may be desirable is the following
 (A) Accurate Voltage/Frequency.
 (B) It eases throttling demands on motor.
 (C) Oil Pressure and fault monitoring available.
 (D) Lower Nosie.
 (E) Electrical Power Buffering.
 (F) Specified in Electric Vehicle specifications for output signal quality requirements.

 :S:MarkSCoffman

BTW: "I am *NOT* Mark Denise"

Les Banki

  • Jr. Member
  • **
  • Posts: 82
Re: Selfrunning HHO system with 400 Watts additional output
« Reply #464 on: June 19, 2014, 01:13:22 PM »


BTW: "I am *NOT* Mark Denise"

Hi Mark,

Do you mean 'markdansie'?
I don't think we will see him or his kind in THIS thread unless they have a desire to make a fool of themselves! :)

The GAME IS OVER for those guys and they know it!

Les,

I re-read this thead and at all of these design files. I am impressed with what you have done.


Thanks.



The overunity energy production it seems is either in the Electrolyser and/or The Ducar
Generator. In the generator it would vest as less mechanical effort required to produce a
given amount of electricity. If it's in the electrolyser it would vest as an over Faraday
amount of HydrOxy being generated per unit power.


I better NOT comment much on this issue because it will upset a few people!
However, I will just say that the so-called Faraday amount of HydrOxy is NOT valid!
IT NEVER HAS BEEN!

I dare say that VERY FEW PEOPLE understand water, the most remarkable substance on this planet!



a) The electrolyzer is very important, so people might want to purchase
it prebuilt. That way it is built exactly to specification, such as the
minimum/maximum fluid levels and the fluid delay constants.
Also final test could be carried out against an operating genset, so overunity
operation could be guaranteed from the factory. I feel this is important too
because it is a high voltage electrolyser. I believe it should be offered in the
7KW version only.  At 240VAC @ 10A and it's physically big.



The electrolyser is very important- ABSOLUTELY!

Physically big, yes. 

High voltage, yes.

So what?  It will have to be treated with the same respect as all other high voltage devices.

As for rest of the comments above, I DISAGREE.

Further, there are NO insane accuracy demands for this electrolyser design, unlike the "resonance" type electrolysis by Bob Boyce.

"minimum/maximum fluid levels and the fluid delay constants" ??

No offense but I honestly don't know what you are talking about!

Provided that people follow the guide lines of building the electrolyser, it is no big deal to achieve the same result every time!

I have NO INTENTION to limit the size of anything!

I leave that to the builders!

So far, it looks like that the 2 - 2.4kW electrolyser might be able to handle a generator perhaps as large as 15 kW!!
(We will soon find out!)



b) 50Hz. is pretty much locked into your design by component values
in the control boards. I don't know if you've gone through to change
the components for 60Hz opperation? There is a 60Hz version of the
Ducar 9000 genset for $799US.



Your concern for 60Hz operation is unfounded!

NO component changes whatsoever!

Please go back to the 'autorpm' circuit description document and re-read the adjustments section.

The switching frequency of the LM2907-N8 is adjusted by P1.

The VCO (IC13 - 4046) is only used for adjustments on the bench without an engine.

In fact it is disabled for normal operation.

No part of this ECU design is "locked in" to 50Hz operation!

The electrolyser is a different story but NOT because of the frequency!

It will have to be build to match the available local mains VOLTAGE!
(More on this later.)

Cheers,

Les Banki