Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: HHO watergas, very low power water electrolysis !  (Read 19620 times)

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: HHO watergas, very low power water electrolysis !
« Reply #1 on: May 13, 2006, 03:57:55 AM »
Here is the patent:

http://v3.espacenet.com/textdoc?DB=EPODOC&IDX=US2006075683&F=0

and here is a picture of the electrolyzer,
seems they are also just using many plates in series,
maybe they use a special driver circuit ?

http://v3.espacenet.com/origdoc?DB=EPODOC&IDX=WO2005076767&F=0&QPN=WO2005076767

lancaIV

  • elite_member
  • Hero Member
  • ******
  • Posts: 5233
Re: HHO watergas, very low power water electrolysis !
« Reply #2 on: May 13, 2006, 04:13:08 AM »
Browngas (alias Yul(Brynner)Brown alias ...),
Aquafuel,Hydrogas,Watergas et cet.:
To use this newly gas-kinds we will have to converse the ic-engine-
surface(similar treat like by nitrogen),they are a little more radical/abrasive !

S
  dL

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: HHO watergas, very low power water electrolysis !
« Reply #3 on: June 05, 2006, 04:52:06 AM »
It seems, the electrolysis is so efficient,
because he is powering just the 2 outer electrodes only,
but the other electrodes between are not connected to the power supply,
but also generate oxyhydrogen gas !
Have a look again here:
http://v3.espacenet.com/textdoc?DB=EPODOC&IDX=US2005258049&F=0

TheOne

  • Hero Member
  • *****
  • Posts: 985
    • Amanatsu Games
Re: HHO watergas, very low power water electrolysis !
« Reply #4 on: June 05, 2006, 05:20:06 AM »
the joe cell is working like that we can say, the main SS tube is positif and middle one is negatif, all tube in between are not connected, maybe this cell work on the same principe.

TheOne

  • Hero Member
  • *****
  • Posts: 985
    • Amanatsu Games
Re: HHO watergas, very low power water electrolysis !
« Reply #5 on: June 05, 2006, 05:26:48 AM »
if you look at the patent http://v3.espacenet.com/origdoc?DB=EPODOC&IDX=WO2005076767&F=0&QPN=WO2005076767

but in page 64 (fig. 20)

you will see its probably like all the others cell out there, one side (half of the SS plate) are connected to - and the other half is connected to +


hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: HHO watergas, very low power water electrolysis !
« Reply #6 on: June 05, 2006, 05:39:34 AM »
Yes,but it is said, that this is just an OPTION.
The normal generator from them seems not to have it.
There are the additional plates NOT connected, thus
lower input power required !

mikestocks2006

  • elite_member
  • Sr. Member
  • ******
  • Posts: 324
Re: HHO watergas, very low power water electrolysis !
« Reply #7 on: June 05, 2006, 05:46:46 AM »
On page 4 it states that it produces 55 scf at 35 psi using 4KWH.

Does anyone know if we plumb this gas flow into a high efficiency gas powered, electical generator, will it produce at least 4KWH using the 55 scf of the gas produced by the device?

If it does then that's it! Not an overunity device per se, but a device that produces excess power using only water.

TheOne

  • Hero Member
  • *****
  • Posts: 985
    • Amanatsu Games
Re: HHO watergas, very low power water electrolysis !
« Reply #8 on: June 05, 2006, 05:52:52 AM »
i will need to try this this summer, today i found some cool 4"x4" SS steel plate at RONA for 0.95$ (CAN) each. they have 2 holes, its like they have made this plate for hydrogen cell! :)

since my jeep v8 4.7 L use a lot of gaz, i will need to find out a way to decrease the gaz cost! at least i was able to increase the mileage (18-19 on higway) now its 22-23! but with an hydrogen cell that will increase more "hopefully"

joe

  • Jr. Member
  • **
  • Posts: 88
Re: HHO watergas, very low power water electrolysis !
« Reply #9 on: June 05, 2006, 02:53:38 PM »
Hi The One,

You said that you have found some SS steel plate at RONA??
Can you tell me in which section of the store you have found it. Cause here in Gatineau's store I can't find any.   

Thanks   Joe

TheOne

  • Hero Member
  • *****
  • Posts: 985
    • Amanatsu Games
Re: HHO watergas, very low power water electrolysis !
« Reply #10 on: June 05, 2006, 03:34:57 PM »
ok, that was a RONA ENTREPOT. i dont know if you have that, RONA is not big like RONA ENTREPOT :), its near to the SS plate for wall, i think they use that to hide some kind of electric stuff in the wall. they have a lot of different plate/shape in the same section. They are in a box, you need to look in the box to see the plate

wizkycho

  • Sr. Member
  • ****
  • Posts: 466
Re: HHO watergas, very low power water electrolysis !
« Reply #11 on: June 05, 2006, 04:34:11 PM »
It seems, the electrolysis is so efficient,
because he is powering just the 2 outer electrodes only,
but the other electrodes between are not connected to the power supply,
but also generate oxyhydrogen gas !
Have a look again here:
http://v3.espacenet.com/textdoc?DB=EPODOC&IDX=US2005258049&F=0

Yes it would be nice that in that way (only first and last plate is connected) resistance wouldnt
rise but it does. So You have to apply more voltage (hundred and more) to pass only few amperes through cell. +,-,+,-,+,-,..... type cell is much more efficient than +,0,0,0,...,- type cell if measured gass output per watt. Monoatomic (ionic) H+ + H+ hydrogen  + O2 can only be made in +,0...,- type cell and not in low voltage +,-... type cell. Some measurements indicate that monoatomic hydrogen and O2 gas can release more energy than simple H2 O2 gas...

wizkycho

  • Sr. Member
  • ****
  • Posts: 466
Re: HHO watergas, very low power water electrolysis !
« Reply #12 on: June 05, 2006, 04:51:30 PM »
It seems, the electrolysis is so efficient,
because he is powering just the 2 outer electrodes only,
but the other electrodes between are not connected to the power supply,
but also generate oxyhydrogen gas !
Have a look again here:
http://v3.espacenet.com/textdoc?DB=EPODOC&IDX=US2005258049&F=0

this site made both types of exp. +,- and +,0,- type cell
first was tube +,- type then +,0,- in plexy. after tried +,0,- he states somwhere in text that much more gas
is produced with +,- (per watt) and moves to building +,-. Then illogically he ends up with building huge +,0,- type with no explanation why he made that turn and there is no report of finished unit.
http://www.oupower.com/index.php?dir=_My_Projects/_Over_Unity_Related_Projects/Electrolysis

pg46

  • Full Member
  • ***
  • Posts: 188
Re: HHO watergas, very low power water electrolysis !
« Reply #13 on: June 05, 2006, 08:43:22 PM »
Hi-
 I'm not sure you're all clear on this cell construction mentioned here.
 This is a common "series" type of cell where only the end plates are connected, one to the positive and one to the negative at each end. The ones in between are "not" connected except by the common electrolyte. These plates are sometimes refered to as "negative" or "floating" plates. The input voltage is divided up evenly by the number of plates. If for example you had 12VDC input and 7 plates in total then you'd have a 6 cell electrolyser. There would be then be 2 volts per cell. If instead you had say 14VDC input and 8 plates you'd have a 7 cell unit with 2 volts each.
 Some people have 120VDC input and use 60 plates in a row. None of the plates are wired up except the 2 end plates. The gas produced of course depends on the plate size, the voltage, the electrolyte and temperature. It's been found that there is no gain in using more than 2VDC per cell so these series cell units are an excellant design for efficient regular electrolysis.
 One needs to seperate, or seal the plates from each other as otherwise there is too much voltage bypass in the plates. In other words there wouldn't be even distribution of the voltage between the cells.
 One could have an ordinary  2 plate design running 12VDC and say drawing 12 amps. This is a 144 watt unit. Its not going to produce much gas though and it will get plenty hot too creating for you lots of problems not to mention that its not very efficient at all since its using more than 2 Volts in the cell.

 Just though I'd mention a couple of points.

Best-
 

wizkycho

  • Sr. Member
  • ****
  • Posts: 466
Re: HHO watergas, very low power water electrolysis !
« Reply #14 on: June 06, 2006, 04:11:57 PM »
Hi-
 I'm not sure you're all clear on this cell construction mentioned here.
 This is a common "series" type of cell where only the end plates are connected, one to the positive and one to the negative at each end. The ones in between are "not" connected except by the common electrolyte. These plates are sometimes refered to as "negative" or "floating" plates. The input voltage is divided up evenly by the number of plates. If for example you had 12VDC input and 7 plates in total then you'd have a 6 cell electrolyser. There would be then be 2 volts per cell. If instead you had say 14VDC input and 8 plates you'd have a 7 cell unit with 2 volts each.
 Some people have 120VDC input and use 60 plates in a row. None of the plates are wired up except the 2 end plates. The gas produced of course depends on the plate size, the voltage, the electrolyte and temperature. It's been found that there is no gain in using more than 2VDC per cell so these series cell units are an excellant design for efficient regular electrolysis.
 One needs to seperate, or seal the plates from each other as otherwise there is too much voltage bypass in the plates. In other words there wouldn't be even distribution of the voltage between the cells.
 One could have an ordinary  2 plate design running 12VDC and say drawing 12 amps. This is a 144 watt unit. Its not going to produce much gas though and it will get plenty hot too creating for you lots of problems not to mention that its not very efficient at all since its using more than 2 Volts in the cell.

 Just though I'd mention a couple of points.

Best-
 

You are completely wrong, certanly. 8)

   Say you have cell with connected 120 V at the end plates only (type +,0...,-) if only 2 amps goes through this allready 240W.
Farady experimented and recently many test have been made that confirms that ammount of gas
is in proportion of current through watter only.
So 12V 12A cell is 144W and will produce 6 times more gass then cell with unconected plates in between.
Will the cell heat or not depends on current density (means if plates are bigger and more of them
for same ammount of current density is lower and there is no heating). Certanly using same plates surface that 240W (type +,0...,-) will heat more.

It doesnt mean if you run 2A current through 20 unconnected plates that you suddenly runned 40A !?!