Author Topic: 808 G6 OSIRIS ENERGY TECHNOLOGY (Read 104990 times)

markdansie · « **Reply #135 on:** December 22, 2010, 04:53:40 AM »

@OSIRIS
well your manners havnt improved and I will watch next time a G6 (Gulfstream jet as per video) flys over that a horse isnt hanging out trying to piss on me.
i mentioned before you inspired a JT device that is nw going to be distributed in large number to 3rd word countries...a simple solarr, powerpack for lighting etc. So some good does come out.
With your latest video you might want to explain to everyone what the meters are saying ..like the first one is the batery DC the second one is the HZ and the third one is perhaps a winding of the coil.
You mention RF.....so can this act as an RF reciever......

??
I dont have to explain that party trick
Kind Regards
Mark

markdansie · « **Reply #136 on:** December 22, 2010, 09:31:53 AM »

PS
I am sure many here (the unspoken 99% observers who must be here) would like to see the video again with say a small load on...maybe some leds and watch the battery charge up. maybe even humor me a little and keep loading it up until the battery starts losing charge...you can then see what gains you are making. (like how many watts can it sustain vs pwer input)
Kind Regards
a man called horse

osiris · « **Reply #137 on:** December 22, 2010, 01:49:37 PM »

Quote from: markdansie on December 22, 2010, 04:53:40 AM

@OSIRIS
well your manners havnt improved and I will watch next time a G6 (Gulfstream jet as per video) flys over that a horse isnt hanging out trying to piss on me.
i mentioned before you inspired a JT device that is nw going to be distributed in large number to 3rd word countries...a simple solarr, powerpack for lighting etc. So some good does come out.
With your latest video you might want to explain to everyone what the meters are saying ..like the first one is the batery DC the second one is the HZ and the third one is perhaps a winding of the coil.
You mention RF.....so can this act as an RF reciever......??
I dont have to explain that party trick
Kind Regards
Mark

ok mark ill bite ..

im verry happy that someone with some intrest some time and effort was able to make this a human reality as i have said b4 i need no payment for my work i appolagize for getting hot .. you all know i get hot quick .. SORRY 4 pissing i just have no tolarance for BS

well on to the next video

yes i closed the loop
my last video has ran all night powering 4 leds .. my voltage droped 1 /10th of a volt in 14 hours of run i can turn off the leds and it will recharge the source ..

as the video shows
i also made the circuit .. and AS I SAID IT WILL MAKE ANY JT SELF RUNNING !

so if ya need an upgrade i gotts one

osiris

osiris · « **Reply #138 on:** December 22, 2010, 01:57:32 PM »

reminds me of a song black horse and a cherry tree

http://www.youtube.com/watch?v=gK8rHqddU4w

neat things may happin when you load it ..

the rf recharge it da s**t

osiris

osiris · « **Reply #139 on:** December 22, 2010, 02:02:09 PM »

Quote from: luishan on December 22, 2010, 03:26:50 AM

To Osiris

Thank you for your effort for sharing with us about your invention.
First of all do not focus many skeptics and 99 % silent users watch your experiment.

I think your setup is kind of earth frequency Aether energy resonate device.
Is that correct ? Recently I looking for that area like Don Smith device.

Would show us circuit diagram your setup.
Thank you.

i havent drawn it up yet but i did take a picture it is simple to build and it works everytime

osiris

luishan · « **Reply #140 on:** December 22, 2010, 06:58:55 PM »

Thank you for your response.

Would you give us just little bit more effort for circuit diagram.
I don't understand the circuit by the picture.
Thanks.

markdansie · « **Reply #141 on:** December 22, 2010, 09:03:21 PM »

@OSIRIS
thatnks for the feed back. It is interesting it can charge a batery so quickly but with a small load of leds it slightly discharges. In otherwords it has a lot of power available when recharging the source but not so much power available if it is placed undder an external load. .....Would be interesting to substitute the battery with a cap (partially charged) and see at what rate it charges the cap.
if that is the case then a simple switch in and switch out system for batteries can be devised
Mark

osiris · « **Reply #142 on:** December 22, 2010, 09:18:26 PM »

Quote from: markdansie on December 22, 2010, 09:03:21 PM

@OSIRIS
thatnks for the feed back. It is interesting it can charge a batery so quickly but with a small load of leds it slightly discharges. In otherwords it has a lot of power available when recharging the source but not so much power available if it is placed undder an external load. .....Would be interesting to substitute the battery with a cap (partially charged) and see at what rate it charges the cap.
if that is the case then a simple switch in and switch out system for batteries can be devised
Mark

INDEED!

sounds like you were watching over my shoulder you explained that well those are the exact effects i have seen !

here is a drawing of the rf recharge toy

i made a video too !
osiris

osiris · « **Reply #143 on:** December 22, 2010, 09:32:23 PM »

im gonna turn this chirp into a 4 note song

here is headly sweater song ..

i said its ok girl maybe you should hold on to my sweater girl

http://www.youtube.com/watch?v=XClyxzzM758

if you dont mind girl its time to get you out of my sweater girl
your never gonna regret it
girl !

osiris

luishan · « **Reply #144 on:** December 22, 2010, 10:00:00 PM »

@ Osiris

Thank you for kind circuit diagram.
But I still not quite understand yet.

(1) I understand the (-) means to AA battery (-) link.
But where can I link (+) of the battery.

(2) How can I link RF recharge transmitter. I mean what is that.

(3) Would mark E, B, C link at the transistor links.

(4) Would you show us just hand drawing the structure of the JT coil.
Do I have to use the ferrite core that you refer earlier ?

Osiris, sorry for many request. But I have a strong passion to replicate your setup.
Thanks.

osiris · « **Reply #145 on:** December 22, 2010, 10:17:56 PM »

Quote from: luishan on December 22, 2010, 10:00:00 PM

@ Osiris

Thank you for kind circuit diagram.
But I still not quite understand yet.

(1) I understand the (-) means to AA battery (-) link.
But where can I link (+) of the battery.

(2) How can I link RF recharge transmitter. I mean what is that.

(3) Would mark E, B, C link at the transistor links.

(4) Would you show us just hand drawing the structure of the JT coil.
Do I have to use the ferrite core that you refer earlier ?

Osiris, sorry for many request. But I have a strong passion to replicate your setup.
Thanks.

if you replicate it and share you effords public on OVERUNITY.COM i will walk you through it !

you will make 0 mistakes .. you will be smileing when you compleate your replication

osiris

here is the build video
http://www.youtube.com/watch?v=bK9U9IclzaY
and i will make a video
COMPLEATE BUILD

Omnibus · « **Reply #146 on:** December 22, 2010, 10:26:04 PM »

@osiris,

Did I hear 'antenna' in the video? So, you're picking an external RF signal? If that's the case, forget it. That schematic is of no interest to an OU researcher. That's not an overunity circuit.

osiris · « **Reply #147 on:** December 22, 2010, 10:54:13 PM »

Quote from: Omnibus on December 22, 2010, 10:26:04 PM

@osiris,

Did I hear 'antenna' in the video? So, you're picking an external RF signal? If that's the case, forget it. That schematic is of no interest to an OU researcher. That's not an overunity circuit.

im wondering if you get regular pay time and a half or dubble time over the holidays .. for trolling ?

lol

osiris

or in your case must be pay by the post
does it pay well ? lol im considering ...

Omnibus · « **Reply #148 on:** December 22, 2010, 11:03:52 PM »

Quote from: osiris on December 22, 2010, 10:54:13 PM

im wondering if you get regular pay time and a half or dubble time over the holidays .. for trolling ?

lol

osiris

or in your case must be pay by the post
does it pay well ? lol im considering ...

In fact you are trolling. Explain where the RF signal picked by the antenna comes from. If it's from an outside source stop trolling by pushing something which has no place in an overunity forum.

osiris · « **Reply #149 on:** December 22, 2010, 11:13:56 PM »

Quote from: Omnibus on December 22, 2010, 11:03:52 PM

In fact you are trolling. Explain where the RF signal picked by the antenna comes from. If it's from an outside source stop trolling by pushing something which has no place in an overunity forum.

i built an in curcuit rf transmitter the ENERGY COME FROM WITH IN THE DEVICE ...

thank you

osiris

000 sooo TPU

News:

User Menu