Free Energy | searching for free energy and discussing free energy

News announcements and other topics => News => Topic started by: Hypercom on December 20, 2009, 03:24:06 PM

Title: POWER PLANT
Post by: Hypercom on December 20, 2009, 03:24:06 PM
A greeting to all

The principle of the lever in the production of electric power.

Watch to see whether a special mechanical configuration, and a particular geometry of the circuit, may break some laws of physics and lead all'overunity system.

In this project we want to demonstrate overunity device which uses the principle of the lever, without resorting to esoteric phenomena ZPE or whatever.

This is an engine coupled to a generator or alternator through a config particular mechanism, this allows you to win the counterforce with an engine power reduced.

The PWM motor drive, the energy stored in the flywheel released during load variations, bring the system to 'overunity.

Alternator and engine are on the same axis of rotation (fulcrum).
The thrust engine is at a distance R1, (longer distance) from the axis of rotation (radius of thrust).

The alternator-load will produce a resistant force to the drive motor, this counterforce is RX distance (shortest distance) from the axis of rotation (radius of resistance).

Let us assume that RX is 1 / 5 of R1, through the principle of leverage can I get an output from the alternator output power greater than the electrical input power of the engine.
The energy gain remains very high even after calculating returns.

http://v3.espacenet.com/publicationDetails/biblio?DB=EPODOC&adjacent=true&locale=en_EP&FT=D&date=20021031&CC=US&NR=2002158536A1&KC=A1

Hypercom
Title: Re: POWER PLANT
Post by: Hypercom on January 03, 2010, 02:04:00 PM
Ciao

FE (free-energy) systems have existed for more than a century ...
This is demonstrated by a number of projects secured, another problem related to their free diffusion.

A FE device is comparable to the holy Grail, generates
unlimited energy and a liberal state not allow
surely, to a private company, to hold all this power
economic and social development. In a system like ours, a free energy device immediately be acquired by 'energy authorities and, if anything, in peaceful times, used to provide energy at affordable costs, see INKOMP ...

This is the situation today, but might change if, in the near future, we are heading for "Smart Grid" and the "Virtual Power Plant", the FE (free energy) equipment could be accommodated in the midst of renewable energy through a system of distributed generation, thanks to two-way connection in which the flow of energy can go in both directions ...

Hypercom

Lever of the second class: the resistant force is between fulcrum and
applied force (or power) are always advantageous.
Title: Re: POWER PLANT
Post by: Hypercom on January 03, 2010, 03:09:34 PM
Ciao

Further evidence that the leverage effect in the production of electric power brings the system all'overunity.

WO2005064777

THE PROCESS OF ELECTRIC RE-GENERATION 

Abstract of WO 2005064777  (A1)
 
The Process of re-generating electricity by rotating the shaft of an electric generator coupled to a flywheel with permanent magnets attached and rotated by magnetic force from a smaller driver flywheel with magnets attached and placed close to the driven flywheel and in turn rotated by a smaller force. This method produces a surplus energy due to the action of leverage and Inertia, which' ensures the rotation of a heavy flywheel with relatively little effort. The magnetic power in permanent magnetic poles offers a lasting source of internal energy. The simplest method of rotation described in the invention produces a natural synchronization effect for stable rotation. The surplus energy produced or gained is used to charge continuously, an internal storage battery, which in turn supplies electric power to sustain the process. The rest is available for external use directly or through conversion process. 

http://v3.espacenet.com/publicationDetails/biblio?DB=EPODOC&adjacent=true&locale=en_EP&FT=D&date=20050714&CC=WO&NR=2005064777A1&KC=A1

Hypercom
Title: Re: POWER PLANT
Post by: Hypercom on January 03, 2010, 03:19:24 PM
Ciao

In the projects secured are many concrete answers to the problem of energy, clean energy, often ignored and dismissed too quickly with the words "not relevant" ... I disagree, allow me to disagree and to invite you and those who want to do a bit of clarity to work towards the right information.

To dismiss the argument in this way means closing one's eyes to the obvious opportunity to do some clarity on that part of physics remained closed in the drawers, it may be successful by any chance? ...

What better opportunity to choose the most interesting projects and submit them for evaluation and assessment of many experts ...

Hypercom
Title: Re: POWER PLANT
Post by: ramset on January 03, 2010, 03:40:40 PM
HMMMM

Hype, have you seen one of these work??
Doesn't seem possible.

Chet
Title: Re: POWER PLANT
Post by: Hypercom on January 03, 2010, 10:43:12 PM
Ciao

A series of projects overunity, closed loop, self sustaining, using the principle of the lever ...
The main components are a motor, a generator, a flywheel, a special mechanical configuration that allows you to take advantage of leverage ...

US2007284886
US2008309290
US2002158536
US2009273190
WO0199264
FR2855676
FR2738687
FR2657474
FR2461394
BE438189
IT1204115

Hypercom
Title: Re: POWER PLANT
Post by: Hypercom on January 04, 2010, 11:50:44 PM
Ciao

EXPERIMENT USING LEVER PRINCIPLE (overunity, closed loop, self sustaining)

US2009273190  Asymmetric hydraulic press electric generator

Abstract:

The asymmetric hydraulic press electric generator is a device that converts mechanical energy to electrical energy using hydraulic pressure. It employs the principle that force acting on a small area can create a much larger force by virtue of hydrostatic pressure and that a large amount of energy can be carried by a small flow of highly pressurized fluid. Given that the device does not use any natural resources to produce electric power, it is a radically new method of generating clean, renewable energy. This innovative technology aims to change our current destructive cycle of energy production into a constructive cycle that benefits all.
Claims:

1. The asymmetric hydraulic press electric generator is a device that converts mechanical energy to electrical energy using hydraulic pressure. The device comprises:a) a hydraulic system which converts electric power into hydraulic power; andb) a generating system which generates electric power,whereby said generating system returns a portion of electrical energy to power said device and supplies another portion to power other applications.
Description:

BACKGROUND

[0001]This invention relates to systems of energy generation that can be used for sustaining and improving the world's productive energy capacity. By using an asymmetric hydraulic press electric generator to generate energy, this invention stands as an alternative way of generating energy, apart from other forms of energy generation including the use of fossil fuels, nuclear energy, water and wind. The asymmetric hydraulic press electric generator employs some of the theory of hydraulics, whereby force acting on a small area can create a much larger force by virtue of hydrostatic pressure and by the principle that a large amount of energy can be carried by a small flow of highly pressurized fluid. Once the device has been activated, it becomes self-sufficient, producing more energy than is expended. This self-sufficient characteristic of the invention enables it to serve an astonishing array of functions: it can power large forms of transportation; it can be used as the sole source of energy for residential homes; it can be assembled into energy farms, similar to today's wind farms, and as an energy source for entire communities. The invention is thus a low-cost and highly efficient means of addressing the ever-expanding demand for energy in modern society. Accordingly, the invention provides a solution to many energy-related social and environmental problems such as pollution, global warming, the current energy shortage and even inflation due to rising energy costs. The ultimate goal of the invention is to bring about a more environmentally sound and prosperous future.

DETAILED DESCRIPTION

[0014]Since FIG. 1 shows a mechanical analogy: Given that the asymmetric hydraulic press electric generator essentially comprises part A and part B, then we only need to show that the force produced by part A is greater than the force needed by part B to generate electric power. We can therefore use a simple algebraic inequality to illustrate this relationship: [0015]First, we can observe that a-b is either positive, zero, or negative. Another way to say the same thing is to note that given two real quantities a and b, only one of the following is true:

[0015]a>b a=b a<b [0016]Second, let us apply this statement to the amount of force generated or needed by the subsystems of the asymmetric hydraulic press electric generator, where a can be the amount of torque exerted by the hydraulic system, and b can be the amount of torque needed by the generating system. In our case, a-b is positive, or,

[0016]a-b>0, [0017]therefore,

[0017]a>b [0018]This is also to say that a can neither be equal to, nor lesser than, b. [0019]Let us then conduct a theoretical EXPERIMENT USING LEVER PRINCIPLE, to prove the inequality a>b. [0020]The experiment is as follows: Given a 6 m-long lever, the fulcrum divides the lever into a 5 m-long arm and a 1 m-long arm. A 3000-kg object is placed on the 1 m-arm of the lever. The question is: How much force must be applied on the 5 m-arm to balance the 3000-kg object? [0021]According to the principle of mechanical advantage, we know that
[0021]F(B)/F(A)=L(A)/L(B), [0022]where F is the force, L is the lever arm, A is the longer arm and B is the shorter arm. Thus,
[0022]F(A)=F(B).times.L(B)/L(A)=(3000 kg.times.1 m)/(5 m) 600 kg. [0023]And since we know that
[0023]w=mg,

Read more: http://www.faqs.org/patents/app/20090273190#ixzz0bgYvQh91

http://v3.espacenet.com/publicationDetails/biblio?DB=EPODOC&adjacent=true&locale=en_EP&FT=D&date=20091105&CC=US&NR=2009273190A1&KC=A1

Hypercom




Title: Re: POWER PLANT
Post by: Hypercom on August 01, 2010, 09:36:07 AM
@ All

More than 10 years that analyze projects secured, I can assure you that I learned a lot from the work of these researchers, clearly I have considered the work right or overunity projects where it speaks of an electric motor coupled to an alternator through a particular mechanical configuration with a driver and sometimes a reduction gear.

The first positive results came with teslag1 fact, high yields of slightly above unity in a configuration ironless in resonance conditions.
The first impression was that high performance was achieved by the complexity of the phenomena that develop in the vicinity of magnetic resonance in rotating seats, far from being easy to analyze without tools.

There are about a hundred projects that I have analyzed, the right one finally arrives, it clearly speaks of the principle of leverage and its importance in the production of electric power. Incredible I have said too much easy ... yet so, analyzing the best translations from other projects I have found many other clear references to the principle of the lever second-class.

These principles are known for more than a century, I analyzed the projects dated 1900 so it is logical to think that Tesla was the first to achieve self-sustaining overunity generators based on the principle of the lever second-class, there are clear references to the importance of flywheel which greatly increases system performance, talking about the energy yield ratio energy expenditure. In these sets modified and optimized it comes to cop10, COP15.

http://v3.espacenet.com/searchResults?bookmarkedResults=true&submitted=true&DB=EPODOC&locale=en_gb&IA=Chiappini+Goffredo&sf=q&FIRST=1&CY=gb&LG=en&&st=IA&kw=Chiappini+Goffredo&Submit=SEARCH&=&=&=&=&=

Hypercom
Title: Re: POWER PLANT
Post by: Hypercom on August 10, 2010, 10:53:24 PM
A little experiment
Title: Re: POWER PLANT
Post by: Hypercom on August 15, 2010, 02:22:14 PM
Updates.

TeslaG1 was the first positive result, however, things were not clear, because with engines identical in electrical characteristics at the same rpm, but different in size, changing the returns ... Reply ... it changes the size of the motor arm, ie, the radius of the point of thrust engine for the same load resistance, engines of different sizes are rightly the difference with a different electrical power consumption.

These are my conclusions at this point I decided to build a small prototype, an engine plate coupled to a generator, if the system is self-perpetuating experimentation will post on the forum.

The problem is finding the right components for an assembly groped ... I considered several solutions, motor plate ... could fit the brushless rotating case fan computer or model airplanes, especially the dedicated kit all'overcloking with speed control potentiometer, the returns on these types of engines are high 80/90%
then we might as flat motor having a motor with the following characteristics: Voltage 12Vdc motor, motor power 12Watt, Maximum engine speed 6000 rpm, adjustable Power consumption max. 1A engine, engine performance about 10watt.

Alternator or generator ... Here things become more complex, the success of this little experiment to play right here on the generation of electric power ... the alternator or generator must have a body content as possible in their diameter, development must be on their length axis of rotation, the yield must be high, the generator produces directly
Vdc, Vac from the alternator produces correct and straighten, I personally have some success with an alternator ironless DIY TeslaG1 precisely.

The alternative is to take a small generator and replace the internal combustion engine with a brushless motor with rotating case of electrical and mechanical characteristics suitable size.

Start_up ... The system must first be brought to speed with auxiliary power, battery or network. At this point you can turn the alternator, in the case of our little experiment, if goodwill is powered by battery, alternator, after appropriate adjustment, recharge the battery more than sufficiency to ensure the continuous cycle (closed- loop) - (self-sustaining).

Hypercom
Title: Re: POWER PLANT
Post by: what123 on September 11, 2010, 07:17:51 AM

Remember that like wow power leveling (http://www.mmopowerlevel.net) with any other kind of web based content you should not expect success by simply putting up the wow power leveling (http://www.mogxe.com/PowerLevel.php?gid=1) video on places like YouTube and do nothing more. You must also expend a lot of effort wow power leveling (http://www.mmopowerlevel.net/powerlist.php?fid=688) so as to increase brand awareness and also learn how to get more convert their aion kina (http://www.mmopowerlevel.net/gamelist.php?fid=7656) viewing of your videos into sales. Only then can you get the results that will make buy wow gold (http://www.mogxe.com) video marketing worthwhile.It is easy to create a video which can then be uploaded free of cost to free video gold in wow (http://www.mmopowerlevel.net/buy.php) sharing websites like YouTube. After that, all you need to do in order to promote your video is send wow gold eu (http://www.mmopowerlevel.net/buy.php) your clients a message with a link pointing to the video. Even better, you should also upload the wow gold cheap (http://www.mmopowerlevel.net/buy.php) video to your website so that visitors can also view it. In fact, this is a better course of cheap aion power leveling (http://www.mmopowerlevel.net/powerlist.php?fid=7422) action given the fact that there is a primitive brain inside all of us EVE ISK (http://www.mmopowerlevel.net/gamelist.php?fid=4044) that is involved in making decisions based on a

Title: Re: POWER PLANT
Post by: Hypercom on October 24, 2010, 03:27:51 PM
Hi

This is a block diagram of the control panel of our modified generator.
Title: Re: POWER PLANT
Post by: FatChance!!! on October 25, 2010, 10:13:40 AM
Lot's of talk and claims, but as usual ----> no proof what so ever!!!
Title: Re: POWER PLANT
Post by: Hypercom on October 25, 2010, 07:39:59 PM
Lot's of talk and claims, but as usual ----> no proof what so ever!!!
There are a good way to build a prototype ... this is my thinking and that's what I'm doing.
If there are good results I will be happy to share them.
Title: Re: POWER PLANT
Post by: Hypercom on December 06, 2010, 11:27:47 AM
Hi

In these projects, we can observe that a special configuration of the rotating masses,  brings the system to overunity.


http://pesn.com/2010/12/04/9501738_British_gravity_motor_generates_12_kilowatts/

http://peswiki.com/index.php/Directory:Alpha_Omega_Galaxy_Freefall_Generator_%28AOGFG
Title: Re: POWER PLANT
Post by: FatBird on December 06, 2010, 08:04:20 PM
Hypercom,  Thank you VERY much for sharing.

Do the 2 flywheels both have to have magnets in them, OR can they be connected with a BELT & Pulleys?

Thanks.

.
Title: Re: POWER PLANT
Post by: Hypercom on December 07, 2010, 08:52:45 PM
Hypercom,  Thank you VERY much for sharing.

Do the 2 flywheels both have to have magnets in them, OR can they be connected with a BELT & Pulleys?

Thanks.

.

Correspondence from the Inventor
On September 18, 2010 5:19 AM Mountain time, the AOGFG Inventor wrote:

Hello Sterling,

Thank you for your interest in my invention and your inquisitive email.

Firstly, for your information regarding the journal article,

I have never claimed 'perpetual motion' - these were the journalists words not mine!

The article reads 'the patent office will not register the design - because if it works it breaks the laws of physics.' - Once again, the journalist's words, not mine!

I have filed a patent on the machine and demonstrated the basic system to officials at the patent office.

This machine converts gravity and magnetic energy into mechanical force. Although this system can be balanced accordingly to turn itself from gravity force, if I do this it is harder to control the system to start and stop, etc. therefore I chose to make the machine balanced to almost zero to be able to start and stop with a minimum input of energy.

I have developed three variations of this machine, which all prove 100% energy can be created from gravity force.

So far, 14 UK engineers have witnessed the machine in action and have agreed that the proof that gravity force can be harnessed in a machine cannot be proved in any easier way than I have already done.

In due course, I will answer more of your questions, however I have been advised to be cautious at this current stage.

http://peswiki.com/index.php/Directory:Alpha_Omega_Galaxy_Freefall_Generator_%28AOGFG%29


Title: Re: POWER PLANT
Post by: Hypercom on December 18, 2012, 12:32:55 PM
A new class of electric systems: Asymmetric electromagnetic systems[/size]If an asymmetric electromagnetic system shall be realized which has a coefficient of performance of higher than 100%, then the phenomenen of the self-symmetrizing mechanism must be understood first. The self-symmetrizing mechanism is a fundamental property of nature. In a tricky way, this mechanism keeps us from seeing the steady and symmetric energy exchange between the electric system and the quantum-vacuum. The self-symmetrizing mechanism describes the symmetry between the energy from the quantum-vacuum which supplies the load and the energy from the quantum-vacuum destroying the input dipole at the same time. The self-symmetrizing mechanism is the cause for the conservation of energy. If we want to realize an asymmetric electromagnetic system with a coefficient of performance of higher than 100 %, then the self-symmetrizing mechanism must be bypassed. How this can be done in principal is explained in the essay "Asymmetric Electric Systems: Basic Principle".


http://www.youtube.com/watch?v=XAZxa7Aa8DU
Title: Re: POWER PLANT
Post by: Hypercom on February 24, 2017, 10:07:52 AM

Means for the conversion of energy
DE102014201268A1


Also great work of this Russian researcher who developed multiple mechanical configurations, a generator with flywheel integrated motor and alternator.


I repeat, these machines once initiated are autonomous, they do not consume fuel and probably should be held only once a year for routine maintenance.


Quote [0004]


Thus, the device constitutes a device for the uninterrupted recovery of electrical energy. The force of the electromagnetic fields, which is capable of rotating the rotor of the electric motor connected to the rotor of the generator, engages at the points farthest from the axis of rotation Of the rotor of the electric motor connected to the rotor of the generator. Upon reaching the operating state defined by the operating characteristics of the electric motor and the generator, electrical energy is generated which is defined by the ratio of the applied electrical energy per unit of time to the obtained electrical energy per unit of time. During the rotation of the electric motor, the electric energy generated by the generator, which is connected to the rotor of the electric motor, will be greater than the electrical energy consumed by the electric motor. The condition for this is that THE RADIUS OF THE ROTOR OF THE ELECTRIC MOTOR IS GREATER THAN THE RADIUS OF THE ROTOR OF THE GENERATOR COUPLED THERETO.


Quote end, I resume my comments ...


We can assume that the alternator must be developed in the axial direction (to have an arm or a short-range resistance)
and the electric motor in a diametrical direction (to have an arm or a long power ray).
Great the electric motor and flywheel solution integrated in a coaxial sense,
This makes me think of another patent but we'll talk another time ...


Happy reading and see you soon.


https://encrypted.google.com/patents/DE102014201268A1?cl=de
Title: Re: POWER PLANT
Post by: sm0ky2 on February 24, 2017, 01:45:51 PM
I encourage a full disclosure of your device and technology
To help the rest of us gain a full understanding of how it works.
This is essential for the dissemination of information surrounding
this device. Else we be perpetually trapped in vague circular context.


Open source full disclosure is the only method to ensure the survival
of the technology. Economic interests will certainly drive its existence
into obscurity.
I am inclined to believe that the people "urging you to be cautious"
about sharing this information- are driven by greed and the prospect
of personal gain, either theirs or yours, from a machine that defies
those very principals of human nature.
It is as illogical as continuing our current ways of life, knowingly and
with full intention.


It has long been known, proven both mathematically and physically,
That there is a difference between the gravitational force, and the magnetic.
When the two forces are said to be of equivalent magnitude: this difference is
the derivative of acceleration; which is:  Time.


Exactly how to utilize this difference in forces, has been an enigma
Please share with us your knowledge, so that it may bring forth the
fruit of its growth.

Title: Re: POWER PLANT
Post by: lancaIV on February 24, 2017, 01:47:34 PM
https://worldwide.espacenet.com/publicationDetails/inpadoc?CC=WO&NR=2015110994A1&KC=A1&FT=D&ND=1&date=20150730&DB=&locale=# (https://worldwide.espacenet.com/publicationDetails/inpadoc?CC=WO&NR=2015110994A1&KC=A1&FT=D&ND=1&date=20150730&DB=&locale=#)

German patent office: 2016/07/25   NON-ENTRY INTO THE NATIONAL PHASE IN:DE


a possible explanation about the magnetism,electricity and gravity relationship:
http://www.zpenergy.com/modules.php?name=News&file=article&sid=3738
Title: Re: POWER PLANT
Post by: Hypercom on February 25, 2017, 09:46:02 PM
Hello to all


We can call generator but a particular generator because the alternator is not served by the thermal engine but by flat-type pilot electric motor and a flywheel, fundamentally does not use fuel self-sustaining (self-sustaining). The second class lever is always advantageous: the applied force required is always smaller than the resisting force, ie the arm-resistance is shorter than the arm-power.
We have the example of an alternator 2-pole single-phase commercial 3KWA 220V-50Hz 3000 rpm-min, the arm-resistance is short.
We have a flat-type pilot electric motor, 1Hp, (developed in diametrical direction), it provides a mechanical advantage because the arm-power is long. We have a flywheel, of adequate size and shape (greater mass displaced towards the periphery) saves a lot of energy and provides a mechanical advantage because the arm-power is long. This particular mechanical configuration provides a very high performance COP-5/10 and depends from the optimization of the various components.


Anyone wishing to make a trial and investigate this amazing physical phenomenon must pay particular attention to the weight, the shape and size of the FLY, to have a high coefficient of performance, most of its mass must be displaced to the suburbs and the diameter (of FLYWHEEL), at least twice the alternator, so we have a motor (electric), a VOLANO and an alternator on the same axis of rotation, the system is started in the soft-start, once the high power of the pilot motor is switched on the alternator (closed-loop) finally, the load is connected, the system works and sustaining. Further improvements of the coefficient of performance (COP) may be obtained by further optimizing the flywheel [/size] and the pilot motor in accordance with the principle of second-class lever, engine and alternator are on the same axis of rotation.
Title: Re: POWER PLANT
Post by: lancaIV on February 26, 2017, 03:17:25 PM
Hello Hypercom,

"We have the example of an alternator 2-pole single-phase commercial 3KWA 220V-50Hz 3000 rpm-min, the arm-resistance is short.We have a flat-type pilot electric motor, 1Hp,....."

                                                  cheap ( conventional) motor and generator ?

                                                                   and a similar idea
https://worldwide.espacenet.com/publicationDetails/mosaics?CC=DE&NR=10011074A1&KC=A1&FT=D&ND=&date=20001207&DB=&locale=# (https://worldwide.espacenet.com/publicationDetails/mosaics?CC=DE&NR=10011074A1&KC=A1&FT=D&ND=&date=20001207&DB=&locale=#)
but like expressed in your reply 13 : prototype ?

https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2009102232&recNum=1&maxRec=&office=&prevFilter=&sortOption=&queryString=&tab=PCT+Biblio
Patent application and EP-application: Granted: 26.12.2012
and prototype : Edvid Linevich ,technical success - but not commercial realization
https://patentscope.wipo.int/search/en/detail.jsf;jsessionid=C209D4022B4D4C66E9ACBF4C7F4F2F94.wapp1nC?docId=WO2009102232&recNum=1&tab=NationalPhase&maxRec=&office=&prevFilter=&sortOption=&queryString= (https://patentscope.wipo.int/search/en/detail.jsf;jsessionid=C209D4022B4D4C66E9ACBF4C7F4F2F94.wapp1nC?docId=WO2009102232&recNum=1&tab=NationalPhase&maxRec=&office=&prevFilter=&sortOption=&queryString=)
Title: Re: POWER PLANT
Post by: Hypercom on February 26, 2017, 09:04:17 PM

Hello lancaIV,


The engine plate type pilot 1Hp is not a commercial product must be built to measure by a manufacturer, keep in mind that you may also have a diameter of one meter for generating high-power groups.


https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=Chiappini+Goffredo&CPC=&IC=&Submit=Search
Title: Re: POWER PLANT
Post by: lancaIV on February 27, 2017, 11:06:14 AM
https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=DE&NR=19533870A1&KC=A1&FT=D&ND=3&date=19970327&DB=EPODOC&locale=en_EP# (https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=DE&NR=19533870A1&KC=A1&FT=D&ND=3&date=19970327&DB=EPODOC&locale=en_EP#)
go to page 10 and compare

His motor/generator system in "compact"manner. The "flywheel" not seen but physically included.
Title: Re: POWER PLANT
Post by: Hypercom on February 27, 2017, 06:40:40 PM
Great lancaIV,


I know the patent, discreet also the work of this researcher. My intent is to understand the principle of operation and the particular mechanical configuration that allow the machines to be autonomous.
Title: Re: POWER PLANT
Post by: lancaIV on February 27, 2017, 09:31:36 PM
To know or understand the principle is one step, to reach the prototype stage the next and to bring this to market the final trial with often less success !

                            What/Which is the real search parameter ?

Functionality ? Durability ?
Price KW-installation/KWh ?
Portability ?
On-/Off-grid ?By-pass ?

                        The load/consumer: fixed or variable load ? 24/365

                                  End-costs : 1000 Euros/KW ? Less ?

Probably this principle https://www.youtube.com/watch?v=UukXtWSLnh8&t=64s (https://www.youtube.com/watch?v=UukXtWSLnh8&t=64s) from the ucrainian inventor Oleg Solomon(ov) gives an idea !
https://www.youtube.com/watch?v=0lakuD6j4Ho (https://www.youtube.com/watch?v=0lakuD6j4Ho)
Title: Re: POWER PLANT
Post by: Hypercom on March 01, 2017, 10:11:50 PM
My project is online, so that anyone who believes we can achieve it. I have a dream, optimize the components, produce or produce them to someone and then do the installation and assembly. Enter a product on the market at low cost to help so many families in need.
Title: Re: POWER PLANT
Post by: lancaIV on March 02, 2017, 01:27:52 PM
https://mtbest.net/solar_house_tour.html (https://mtbest.net/solar_house_tour.html)
100% self-sufficient in sustainable electrical energy. Our power station (https://mtbest.net/power_station.html) is based on wind+solar energy.

https://www.jovoto.com/projects/300house/ideas/12769 (https://www.jovoto.com/projects/300house/ideas/12769)


" Enter a product on the market at low cost to help so many families in need."

There are many Foundations (with Multi-Million Dollars budget) which are trying to resolve this daily needs.
 Also through international competitions and awards ! Google,Gates-Foundation,et cetera ....

Beside NGOs also U.N-Organisations like UN-habitat,UNHCR/F.A.O.

Your first posts 2010 with explanation about 10 years re-/search ( beginning 2000 ?) :
                                                            results ?

I think it will be easier and faster to realize an "one cent/Wattpeak-Solar cell"
(cost estimation by Alwin Marks 1984 double cell invention https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=18&ND=3&adjacent=true&locale=en_EP&FT=D&date=19860304&CC=US&NR=4574161A&KC=A# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=18&ND=3&adjacent=true&locale=en_EP&FT=D&date=19860304&CC=US&NR=4574161A&KC=A#) )
 than this Motor-flywheel-generator concept !

Hypercom,without commercial rights (patent grant/utility model) you will not get financial help from industrial partners to get your idea to market !
 
living UTOPIA : https://www.tamera.org/index.html (https://www.tamera.org/index.html)
https://www.tamera.org/project-groups/autonomy-technology/ (https://www.tamera.org/project-groups/autonomy-technology/)

or: going back to the roots

and do planning out the dream :
 "I have a dream, optimize the components, produce or produce them to someone and then do the installation and assembly."

Optimizing the components f.e.
 core:                                        plastic bonded iron powder
http://www.greencarcongress.com/2007/10/plastic-bonded-.html (http://www.greencarcongress.com/2007/10/plastic-bonded-.html)
Researchers at Lund University (Sweden) have developed (http://www.lu.se/o.o.i.s?id=1383&visa=pm&pm_id=763) a technique for making magnetic components in electric motors from plastic bonded iron powder (PBIP) that can cut aggregate production cost in half and nearly double the output of the motor.

                                                           Iron-Nitrite magnets
http://dailyfusion.net/2013/10/iron-nitride-magnets-will-make-electricity-generation-cheaper-and-greener-22428/ (http://dailyfusion.net/2013/10/iron-nitride-magnets-will-make-electricity-generation-cheaper-and-greener-22428/)
“A costing model puts neodymium–iron–boron used now at $60 per kilogram and our material at about $10 per kilogram,

                                                           magnets array
                    http://www.freepatentsonline.com/y2011/0241349.html (http://www.freepatentsonline.com/y2011/0241349.html)
As illustrated in Table I (above), the Ronbach magnetic array of both the electromagnetic generator/motor 1 (FIG. 1) and the electromagnetic generator/motor 1a (FIG. 1A) improve the output of EMF 8 and torque significantly over conventional single-magnet arrays.

                                                           instead copper aluminium/sodium/CNT wire
http://spectrum.ieee.org/nanoclast/semiconductors/nanotechnology/carbon-nanotube-yarns-set-to-replace-copper-windings-in-electric-motors (http://spectrum.ieee.org/nanoclast/semiconductors/nanotechnology/carbon-nanotube-yarns-set-to-replace-copper-windings-in-electric-motors)

                                                           capacitive coil   

                                    motor and/or generator double winding :
                               http://www.arestov.de/index.php/de/kontakt

or ready to produce design : http://electrifyingtimes.com/Helmut_Schiller_motor.html (http://electrifyingtimes.com/Helmut_Schiller_motor.html)
                                                                compare KW/Kg
Title: Re: POWER PLANT
Post by: Hypercom on November 27, 2017, 02:11:05 PM
Work in progress ...
Title: Re: POWER PLANT
Post by: Hypercom on January 20, 2018, 05:00:22 PM

I must communicate with regret the closure of the Research and Experimentation Forum
World Wide Union Independent Research Group.


http://independentresearchgroup.forumfree.it/?f=64818972


Cause: (Reasons Noted) ...