Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze  (Read 16407763 times)

Ecotestgroup

  • Newbie
  • *
  • Posts: 1
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22710 on: October 27, 2017, 08:26:37 AM »
Ecotest is a worldwide distributor of radiation detection technologies and offers a great selection of radiation detectors that will suit every need. Visit us to order radiation equipment. https://ecotestgroup.com/

darediamond

  • Full Member
  • ***
  • Posts: 178
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22711 on: April 02, 2018, 01:21:16 PM »
Thank you for sharing this DEEPLY VITAL INFO!

I recently develope full interest in Tariels Gen when I finally confirmed  that for transformers installed in my local area to work, it must receive ground connection which serves as Negative while the Air which provides the Voltage electrons is the positive.

Don' Smith of blessed  memory also revealed the same liberational secret in His famous book resonance energy methods. He said the power from the electric company does not really comes from the dynamo nor transformers be it set up or step-down. He said everything comes from Air and THAT POTENTIAL OR POSITIVE ELECTRONS CAN BE GENERATED BY INDIVIDUALS TOO!

So Tariel now complets the sentence by is Gen. And that Is that : ALL. YOU NEED TO DO ALTER WARDS IS TO TAP YOUR NEGATIVE TOO FROM THE GROUND!!

Now I can liberate  my fellow Nigerians with this knowledge.

cliff33

  • Newbie
  • *
  • Posts: 36
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22712 on: April 16, 2018, 04:20:33 AM »
Hi Darediamond,

Some time back I think it was you who said that to get maximum magnetic strength from a solenoid coil, it should
be wound trifilar or more and than connect these wires in series.

Sounds reasonable, but I just wanted to ask you if you yourself have tried it or is it just  theory
you read about?

NRamaswami

  • Sr. Member
  • ****
  • Posts: 490
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22713 on: April 16, 2018, 06:43:31 AM »
Hi Cliff33

What Darediamond has said is correct. A better thing is to put plastic sheet, iron sheet or iron rods, plastic sheet between each layer of such wires to produce great magnetic field at the lowest input. I have done it myself and I have even a coil wound like that with me ready. But the coil draws enormous current if we do not connect all the wires in series and if one or two of them are kept open. I have tested two different 10 filar coils. Both would magnetise at the lowest input. But if we make one wire an open coil and connect 9 others coil draws enormous current. In another coil it requires two coils to be kept open for the large current to be drawn. If we connect all in series then very little current would be drawn but it still makes very high magnetic field.
If we put AC capacitors in parallel to the input the current drawn is still reduced. I am actually unable to understand why these things happen but these are easily replicatable observations. I am unable to understand how and why these things happen.  This is not theory or simulation but practical observation.

Input in all these cases is 50 Hz AC. Lowest input used is 105 watts to magnetise to near saturation about 150 kgms of iron.


cliff33

  • Newbie
  • *
  • Posts: 36
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22714 on: April 18, 2018, 09:42:57 PM »
Hi NRamaswami,

      Thanks for that good information.
I just didn't want to go through all the trouble if it didn't work.
  There's a lot of good info. that you won't find in any text book.

  I might try using it on the Figueras device, but right now I'm
working on a Don Smith unit.

NRamaswami

  • Sr. Member
  • ****
  • Posts: 490
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22715 on: April 19, 2018, 09:40:16 AM »
Thanks for your kind words. It is always motivating and encouraging to receive good words.

I suspect that today Figuera device is very easy to do. It is basically create a powerful magnetic field using AC input and take output as pulsed DC to merge current and increase the voltage uniformly. But who will look at simple things. I can only confirm that a very powerful rotating magnetic field can be created easily with very low AC input to magnetise very large iron core. We would need to use very thick wires if we are going to take output as pulsed DC. That's is quite expensive to test and quite difficult to wind. But it is fairly simple.

darediamond

  • Full Member
  • ***
  • Posts: 178
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22716 on: April 22, 2018, 02:36:13 AM »
Hi Darediamond,

Some time back I think it was you who said that to get maximum magnetic strength from a solenoid coil, it should
be wound trifilar or more and than connect these wires in series.

Sounds reasonable, but I just wanted to ask you if you yourself have tried it or is it just  theory
you read about?
I talk and walk the talk Cliff33.
As for Figuera Modern day replication, apart from applying Multifillar wire, you need Resonance to make it work properly. And to reduce cost, apply High frequency. Place your serially connected ac-powered resonance opposing coils in Oil. At resonance, Lenz or Ohms law is negated.

NRamaswami

  • Sr. Member
  • ****
  • Posts: 490
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22717 on: April 24, 2018, 05:06:30 AM »
The only device where I have seen and any one can replicate it of a possible COP>1 is in Ramaswami device which is a variation of the Figuera device. Input used was AC.

Primary was multifilar coil and secondaries surrounded each primary coil and were wound on core. The output of secondaries on both sides of primary is almost 98% to 99% of input. Some times it appears to be higher but it is treated as measurement error.

Secondary was also wound on the central core as in Figuera. Even with two primaries I was able to add five secondaries like this and the combined output of all five secondaries taken separately is cop>1, But it is not sufficient to enable a self runner.

I have tried multiple times to make a self runner but it does not work. It has been strongly indicated by a very highly reputed Scientist that resonance is key but I'm not able to invest my time, money and energy on these things any more.

Out of all devices that I tested only the Figuera device type of device having a common core has any potential. I'm not able to understand how Nelson Rocha device works and how the Tariel Kapanadze device works.

v8karlo

  • Sr. Member
  • ****
  • Posts: 385
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22718 on: May 13, 2018, 03:47:48 PM »
http://amasci.com/tesla/tesceive.html
http://amasci.com/tesla/tcvmail.html
From the article:
We see that by putting a big AC voltage on the tuned circuit and by adjusting
its phase in relation to the tiny incoming current, we can "suck" the E x M wattage
from the enormously broad wavefronts of the incoming waves.  It also works this
way inside a simple circuit using conventional voltage dividers: add a resonant circuit,
and the series impedance of the power source behaves smaller.
See this example circuit. It should still work this way even when a part of the antenna
circuit contains a series capacitor whose dielectric is made up of many feet (or even tens of km)
of empty space.
It's very much like building a high-voltage power line: to transmit high wattage on a thin wire,
we use high voltage at low current, and then we put a step-down transformer at the far end of
the power line.
However, in the "power line" shown in the above diagram, we then put a tiny capacitor in
series with the high-voltage line.
Then we increase the thickness of the capacitor's air-dielectric until dielectric is miles thick and
the current in the system is mostly composed of displacement current in the empty space
between the pair of widely-separated capacitor plates.  To transmit significant power,
step the voltage up to astronomical levels at one end, then step it back down at the other end.
Rather than using only a step-down transformer in the receiver, instead we use a hi-Q resonator,
and we allow the resonant voltage to rise to a huge value.  As a result, EM energy will be
"sucked" into the receiver.
We've been carrying around Nikola Tesla's power-receiver in our back pockets since the 1960s.
Also, in bygone decades, those old "regenerative" and "superregen" receivers were not what they seemed.
They were transmitting in order to receive, they were harnessing the same bizarre
"energy sucking" process.
Regeneration isn't just a fancy way to amplify a small signal, instead it increases
the incoming signal intercepted by a short antenna via some weird EM physics.
Do the designers of 90 years ago know something that modern scientists do not?
http://amasci.com/tesla/high_voltage3.html#tfiles
« Last Edit: May 13, 2018, 06:42:59 PM by v8karlo »

AlienGrey

  • Hero Member
  • *****
  • Posts: 3713
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22719 on: May 17, 2018, 03:37:52 PM »

Offline v8karlo

an interesting hypothesis but that's all it is, antenna more like earth ground is the biggest antenna there is.
So what your saying is you don't have a clue, in days gone by family's didn't have radio only the rich and scientists
Most family's had a piano and that was that! But perhaps that's your missing link, music, every thing is a musical note!
Don't want to say too much on here there are too many con artists and too much BS in a big way  :) ;) :D

v8karlo

  • Sr. Member
  • ****
  • Posts: 385
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22720 on: May 18, 2018, 06:34:09 PM »
AlienGrey

Yes, you are right. I dont have a clue, and I dont have a time
any more to experiment because of my job.
So I come here from time to time to read few posts if I have a chance
because free energy is still interesting idea to me.
I found that site interesting and post it.
No hidden agenda, just nice site.
Thats all.

There are good brains here and I hope some of you will crack the
missing secret.

Vinyasi

  • Newbie
  • *
  • Posts: 41
    • My profile on Quora.
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22721 on: June 09, 2018, 01:45:13 AM »
It should be simplified in a way so that a carpenter can come across it by chance while connecting his workshop equipped with disk saws to the grid.
Is there any tangible outcome after all these dozens of pages? If not then obviously something important has been missed here. What could that be?

Maybe that in a parametric (amplification) circuit there should be an entry point for the ambient (radiant) energy in order to excite the oscillations successfully? Just like an audio amplifier which needs a signal on its input in order to amplify.
I think I do know now the major error in all these differential equations: All these equations are only valid in a closed system. If we measure a circuit then normally we shield it even from the environment in order to get unadulterated results in accordance with the equations written in the textbooks. So if we want energy from the environment then shielding the circuit from it is not the brightest idea. But a differential equation which describes the function of a LC circuit cannot incorporate any perturbations coming from the environment because the specifics of these perturbations are generally unknown. That means we do not know whether the coils recharges the capacitor to -141.4% of the original voltage or to a different value if there is an entry point for radiant energy not considered by these differential equations.

So much for that philosophy. :)

http://is.gd/explainpe
http://is.gd/electricparadigm

lifeforce-energy

  • Newbie
  • *
  • Posts: 9
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22722 on: August 01, 2018, 12:50:54 PM »
Hi Guys, I'm about to embark on building a so-called Zilano Zeis Zane - Don Smith-Kapanadze type design for replication, with open sourcing in mind to make the essential overunity elements repeatable for construction purposes for everyone.

Still trying to get my head around how to wire & tune those L1 / L2 coils. According to my notes both L1 + L2 Bilifar coils (CW +CCW) ought to be tuned to 1/4 a wavelength? Yes, this certainly makes sense for a 25MHz input but not for a 25kHz Neon 8000V transformer that I'm using for the primary voltage driver, because too much wire would be required to actually tune it to 1/4 wavelength for the Tesla standing wave effect, even with the GND reflection factored in. Say for L1 primary, you would need 3000 metres to attain this, going by std wavelength calculations. So I guess we are possibly talking higher frequency harmonics for actual tuning for both L1/L2 coils to be tuned to  1/4 wavelength each to make it fit, possibly generated by the spark-gap rising edge interference input in parallel to L1? I would like to get some clarification from other members, if this indeed is the case, or do we just carry on and rely on some luck based on experimental trial & error?
I have attached a couple of photos to explain the setup, that I'm soon to undertake. I work for a power electronics manufacturer that does phase shifting and burst control in Australia, so I have the necessary resources available to upscale to significant heavy current load outputs if required.

Cheers

Paul

esaya

  • Newbie
  • *
  • Posts: 4
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22723 on: August 07, 2018, 04:16:51 AM »
https://www.youtube.com/watch?v=qMnZqzUPjII

the vid is not mine.

similar to kapanadze 2 transistor,2 resistor (with heatsink 2004 video)?

luc2010

  • Full Member
  • ***
  • Posts: 113
Re: Selfrunning Free Energy devices up to 5 KW from Tariel Kapanadze
« Reply #22724 on: August 07, 2018, 04:50:59 AM »
Hello My Friends,

where can i find :
ac source 8000 volt ( ac only not pulsed output) with 25 khz or higher??

is that variable dimmer ac source or pulsed dc?

lucky if yes,
 i would love to have that monster at my hand!!

regards
luc2010