It's all interesting , but how can you explain that Ed moved ALL Coral Castle from another place ?
I doubt he prepared that new place previously,but nothing is impossible.
How an you explain heavy stones transport using ordinary truck ?

@justalabrat
yes loud was load, sorry

@forrest
at first, I hope that the technical speech remains divided between:
 the MYTH,

 and the possible method 
 that he used in order to astonish who was fascinated from this mystery….
 and, i am sorry because I must smash a myth;
 but is usefull to  try to explain HOW HIS old work can reborn ,
because there IS so' MUCH profit to understand that TODAY, for use it....
( usable in his memory, is better then remember a death great mith, did you agreed? )
usefull understand , as this can to give energy to a system that is not OVER-UNITY,
but certainly that is FREE ENERGY. you do not pay the (a little water masses) rain need to feed that!

I believe that HE had moved the enormous stones, probably using a bridge lifter;
and the vertical and horizontal movement was guaranteed from according to the second "sailed" two way hydraulic circuit (jacks);
 the first one is "open" from the pool to the sink

remember that this device is 
 NEW
system and is JUST BORN, and I wish that you can see that have a big possibility to develop....I KNOW that, but is necessary a bases condivided

i am very proud to have had your attention…i follow all topichs....

 but, i am sure that a NEW technique as i had explain, can give many possibility of development,
 and be able to the acquaintance of many persons on this.....
especially, if this method  is the axiom for being able to have a system whit a great energy production capacity, using a rain, but more using a water gravity distribution.... in symbiosis whit electric energy...
and VERY easy to reply too.
 because a system that leaves from:  SUPERFICIAL water rain management (refilled pool), and, that uses also drainage sink,

 much profit can be done in the system "smart grid",
this also IS base for a system "into island" ,
 with this ACCUMULATOR-pool in head of low voltage grid (territorial carryer) .
and with function of convergence of all the renewable energy

i can also call it a ITALIAN WATER DEVICE exponential lifter of masses
or SMART GRID NEEDed...emproving
, if this hurt your trusts, about Coral Castle

but will remain that Ed used a lot of tackles....
or,  do you think that egiptyans 400 ac,  was better then us ? he say....
then, i can show some photo that can help my ideas,
but CERTAINLY, is not a question on who between US , have the reason!

the question IS :
the device can work as I say? this is or not a good device? this is NEW ?
 my wish is go on and develop this technique whit you,
 and put exclusively the attention on the device, after...will change name to topic??
 will be possible.....

kind regards mirco

If that vertical pipe along side of the generator runs down into the ground water basin Then you would have a place for one of the conductors to go.

--giantkiller.

 One thing about static heads, you calculate by the smaller one. this might be because water is not compressable.

@ GIANTKILLER

did you mean.....this ? you very smart, plus then smart grid !!
answere:
surprise : NO!!  there is not the necessity of a sink!!,
you can do that, and put the machinery, 
 in every point on a pipe that use a gravity distribution from a pool,
in every point, on a pump there is two force that work:
a poll action +, end push action+ = SAME force
1Kg/cm2 every ten meter of the delta <x> of levels, from the pool to discharge point
(thet is >++> if you discharge on bottom of sink, naturally)....

naturally, not on water pipe that came from a eletric pumps directly....

the capacity of accumulation-
storage and the gravitation distribution is the only necessity needed,
but i will explain after....

@ giantkiller

I meant the negative lead/wire from the generator goes down the pipe to the water table or well.

--giantkiller.

@GK

I think @hammuraby may have something.

I work in water treatment and pumping and pressure and suction methods.

Think of this.

It is said that the wheel has 24 (I think) horse shoe magnets. The size of that wheel structure is so robust that the energy it could produce is substantial. But how do you turn the damn thing and with what? The magnets would still have been exposed to the infernal sticky spot. Like any such magnet wheel will stick. But the funny thing is your can give such a wheel a good nudge left or right and it will turn in that direction until it stops again. It will turn in either direction.

So............................. what if the water flow is not used for 100% of the driving energy, but only 100% of the nudging force required to keep that huge wheel off the sticky spot. That may be only 5-10% of the total energy produced. All you would need is a way to turn the output shaft in the same direction regardless of the wheel direction. That wheel could turn either an electric generator or a hydraulic pumping system or even an air compression system. It does not matter. As long as that wheel stays off the sticky spot who cares.

Hmmmmmmmmm.

See photo:

A: Looks like a large flywheel but it is never seen in the recent site photos.
B: Looks like a water run generator or pump.
C: His hand is actuating this lever that could simply be a two-way water check valve. Turn one way water flows down, turn the other way, water flows back up.
D: Could be 24 magnets or simply 24 gear teeth that may be hitting that winch type box E:
E: Looks like a winch box with a chain coming out the bottom side.

The water flow idea could have some merit.

A. is a bicycle.
B. Is a pipe.
C. Is a turn handle for spinning the stator.
D. There is no gearing
E. is an electrical generator

The axle of the stator goes below and is connected to a 2 section crankshaft. This in connection with the bicylce could have been used for a drive mechanism. But then he died of stomach cancer..


The wooden blocks under D. & E. are for the wire wound glass bottles. They are on the wall and there are loops of holding wire on each end of the wooden blocks to hold the bottle based inductors in place. One small diameter for the neck and wide diameter for the base. He also used square wire. The funny thing is nobody at the castle has ever assembled the device configuration to see what it does. And they wouldn't let me, either.

The coils hang on the wall.

You guys are confusing the basic of operation. Stand on the step on the North pinnacle, face South, look side to side at the walls and you see a 3d view that is not posted anywhere. It is a pinncle point in the Universe of the ultimate precession for a certain date. 

Don't speculate. Make the trip. Same as 'Build it'. You can't possibly imagine anything correctly until you laid your eyes upon the deep insight of the mystery. Am I to be the only one? Stand on that one spot. The only thing I missed is coordinating my trip to the alignment of the local angles to the stellar placements.

Get the GPS off of google. Enter those into a program similar to 'The Sky'. Position the observer view horizontally for a 180degree Southern scan. Run through a time scan and watch when the rising of Saturn and the other heavenly bodies arise over their respective statues on your left wall view. The chairs and pointers inside the castle walls will also eventually line up with their prospective targets. The little bear chair is Ursa Minor. This points to a habitable a planet in the Goldilocks zone. The measurement is on the iron door. +20million light years. Why did he display this? On that same door he has a bell with a note by the other planet that states 'Ring the bell twice'. Reference Keely for 'Sympathetic Vibratory Physics' and heterodyning. Look for Dale Pond in Amazon.

This goes far deeper than the rabbit hole. There, I spilled the beans.

--giantkiller. Anybody else you know this? Don't spin your wheels any more... Spin the Universe. This can be done in these times.