Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Robert C. Beck Biological Electrification Device  (Read 41439 times)

Rosphere

  • Sr. Member
  • ****
  • Posts: 482
Robert C. Beck Biological Electrification Device
« on: February 27, 2008, 09:45:33 PM »
I recently built a Robert C. Beck Biological Electrification Device.

Here are two hours of the man himself, speaking about this device, and others:

Click here.

My good friend from across the Atlantic, Roberto, asked if I would share my build experience.  I could not find any, "Health Matters," category here in this forum, so I decided to start this new topic here in this category.

The schematic and directions are on page 7 of 42 in the attached PDF; (between pages 4 and 5 of the numbered pages if you print the document.)

I made several substitutions, due to a lack of immediate availability, and yet the final unit seems to perform as intended.  The substitutions are:

1.  Radio Shack TLO82 Dual BiFET OP Amp, (Supply voltage = 36 VDC,) for US$1.99.  Since my supply voltage is only 27 VDC, I decided that this might work instead of the, "LM358... 50 volt peak to peak...," called for in the circuit description.  I opted not to drive 25 miles away to purchase an NTE928M, for US$3.50, which is supposed to be more similar to the LM358 than what I purchased close to home for less money.

2.  Radio Shack INT4742A 12-Volt Zener Diodes, (US$1.39,) instead of the 18 V diodes called for in the circuit description.  Since this diode pair is seldom used, only by the power indicator circuit, I decided to solder in these twelve volt twins instead.

3.  A ceramic 0.22 MF cap that I already had on hand instead of the 22 MF cap called for in the circuit description.  Since this cap is seldom used, only by the power indicator circuit, and I can see the LED light, (a bit dimly), I decided to solder it in for now.

4.  Radio Shack 100k-Ohm Linear-Taper Potentiometer, sans the built-in SPST switch called for in the circuit description.  So, I had to add the extra surface mount switch.  I used two pins of a small surplus DPDT switch that I already had on hand from a box of "mystery parts" that I purchased 25 miles away and last year.

5.  Stainless steel fork tines instead of stainless steel welding rods.  Since soldering stainless steel was troubling for me, I found that the shape of the fork tines fit nicely into some standard female blade terminals.

I had a few parts on hand but still managed to part with $36.00 at Radio Shack.

I have not used it, 'as prescribed,' thus far.  There are other parts of the protocol missing and some strong precautions to heed.  I need to listen to the old man one more time and take more solid notes.

Sorry about the fuzzy photos.  I used a camera phone at perhaps too close to focus well.  However, the circuit, the source with all the tiny details, and all of my substitutions are attached or noted here.

Made possible by Tao and Jason.

More later.

Rosphere

(http://www.overunity.com/index.php?action=dlattach;topic=7.0;attach=18050;image)
(http://www.overunity.com/index.php?action=dlattach;topic=7.0;attach=18051;image)
(http://www.overunity.com/index.php?action=dlattach;topic=7.0;attach=18071;image)
(http://www.overunity.com/index.php?action=dlattach;topic=7.0;attach=18072;image)
(http://www.overunity.com/index.php?action=dlattach;topic=7.0;attach=18073;image)
(http://www.overunity.com/index.php?action=dlattach;topic=7.0;attach=18054;image)
« Last Edit: February 28, 2008, 01:11:05 AM by Rosphere »

tao

  • TPU-Elite
  • Sr. Member
  • *******
  • Posts: 378
Re: Robert C. Beck Biological Electrification Device
« Reply #1 on: February 27, 2008, 11:54:01 PM »
I bought a pre-made device from SOTA some years back...

Beck's device works, period. Its based on EXPERIMENTAL RESULTS...

Here is a GREAT writeup on Beck http://www.sharinghealth.com/researchers/beck.html

You know what is funny? Did you know that Bob Beck is FRONT row in Peter Lindemann's Free Energy Secrets of Cold Electricity video? It is him all right, so you know that Lindemann knows Beck's work very well...

I have used the device many times when sick, and no matter the illness, it alleviates it very quickly...

That sharinghealth.com website has Beck's original paper handouts for sale, the ones that he used to give out for FREE to visitors to his FREE SEMINARS. He wanted NOTHING more than to HELP HUMANITY via this device, period.

Oh, and rosphere, you should be able to get some nice electrodes from SOTA, I know that they used to sell replacement ones. Mine that came with my device are nice, cylindrical and gold plated with a speaker jack connection on the end of the wires.

Peace guys, these will be my only comments on this device.

Rosphere

  • Sr. Member
  • ****
  • Posts: 482
Re: Robert C. Beck Biological Electrification Device
« Reply #2 on: February 28, 2008, 12:08:34 AM »
@Tao,

Thank you.

Who directed this to Jason, I wonder.  ;)

helmut

  • Hero Member
  • *****
  • Posts: 723
    • in construction
Re: Robert C. Beck Biological Electrification Device
« Reply #3 on: February 28, 2008, 12:24:23 AM »
@Rosphere
Well done
I like it
helmut

Rosphere

  • Sr. Member
  • ****
  • Posts: 482
Re: Robert C. Beck Biological Electrification Device
« Reply #4 on: February 28, 2008, 12:59:54 AM »
Thank you, helmut.

Here is a link to the earlier device patent referred to in the video for treating blood outside the body.

Click here.

tao

  • TPU-Elite
  • Sr. Member
  • *******
  • Posts: 378
Re: Robert C. Beck Biological Electrification Device
« Reply #5 on: February 28, 2008, 01:35:17 AM »
@Tao,

Thank you.

Who directed this to Jason, I wonder.  ;)

Yes, I wonder...  ;D

 8)

amigo

  • Hero Member
  • *****
  • Posts: 545
Re: Robert C. Beck Biological Electrification Device
« Reply #6 on: February 28, 2008, 02:54:26 AM »
I'm quite excited that there are people here interested in alternative methods of healing, perhaps we can ask Stefan for a section on this subject where we can share our experiences and knowledge or even collaborate on some future research projects (free ones, health should be free).

Dr. Beck was much more than it meets the eye (or that people know about) and it is just so unfortunate that he is not with us anymore. There's a whole new generation of people interested in alternative medicine that he could've guided and assisted with his vast experience and knowledge. I was recently reading up on Lakhovsky MWO and found this page http://integratron.com/4Technical/Technical.html , and what do you know, it's Dr. Bob Beck's circuit included.

As far as his "Plant Growth Stimulator", I have been reading field tests from other experimenters and they have come to the conclusion that using stainless steel electrodes eventually hurts the skin and people develop redness around the area where they are applied.
My thinking was in the lines of using gold or silver (plated) electrodes instead of stainless steel and saline solutions, but have not done any tests with either yet. What's everyone's thinking on that idea?

Also, there were suggestions elsewhere about using carbon (based) electrodes instead, which are more closer to our biological makeup and would not require any saline solutions either for increasing conductivity. Of course we would need to find the right kind of material to be used so that adverse effects of a redness or a rash developing at contact spots is avoided.

ronotte

  • elite_member
  • Sr. Member
  • ******
  • Posts: 417
Re: Robert C. Beck Biological Electrification Device
« Reply #7 on: February 28, 2008, 08:54:03 PM »
Thank Rosphere for sharing your work!!

G R E A T

Roberto

jacek

  • Newbie
  • *
  • Posts: 32
Re: Robert C. Beck Biological Electrification Device
« Reply #8 on: February 29, 2008, 04:15:42 AM »
Hi all,

I too experimented briefly with a home-made Beck's zapper and found out that my appetite had decreased during that time but I was not hungry. Lost some weight (250 lbs down to about 235 lbs).  Energy level was somewhat elevated but not dramatically, slept well during the night - a nice change for the better.

I plan to go back and do the entire 3-week regimen out of curiosity (I feel fine health-wise, fyi)

Best regards,

Jacek


Rosphere

  • Sr. Member
  • ****
  • Posts: 482
Re: Robert C. Beck Biological Electrification Device
« Reply #9 on: March 01, 2008, 02:10:16 PM »
...I'm quite excited that there are people here interested in alternative methods of healing, perhaps we can ask Stefan for a section on this subject where we can share our experiences and knowledge or even collaborate on some future research projects (free ones, health should be free)...

Thank you for your thoughts, amigo.

@Stefan  This sounds good to me.  I am sure that there are a good number of sedentary laboratory dwelling creatures here that might benefit with a tip or two about health matters.  What do you think about adding a new health category?
...My thinking was in the lines of using gold or silver (plated) electrodes instead of stainless steel and saline solutions, but have not done any tests with either yet. What's everyone's thinking on that idea?

Well, I can not speak for everyone, but tao uses gold.  I have emboldened his words about the electrodes, below.  (And backed-up the rest of his experience points at the same time to guard against any, unforeseen at the moment, future outbreaks of emotional deletions.  I've done them myself at times.)
I bought a pre-made device from SOTA some years back...

Beck's device works, period. Its based on EXPERIMENTAL RESULTS...

Here is a GREAT writeup on Beck http://www.sharinghealth.com/researchers/beck.html

You know what is funny? Did you know that Bob Beck is FRONT row in Peter Lindemann's Free Energy Secrets of Cold Electricity video? It is him all right, so you know that Lindemann knows Beck's work very well...

I have used the device many times when sick, and no matter the illness, it alleviates it very quickly...

That sharinghealth.com website has Beck's original paper handouts for sale, the ones that he used to give out for FREE to visitors to his FREE SEMINARS. He wanted NOTHING more than to HELP HUMANITY via this device, period.

Oh, and rosphere, you should be able to get some nice electrodes from SOTA, I know that they used to sell replacement ones. Mine that came with my device are nice, cylindrical and gold plated with a speaker jack connection on the end of the wires.

Peace guys, these will be my only comments on this device.
Thank Rosphere for sharing your work!!

G R E A T

Roberto

Ask and receive, my friend.
...Lost some weight (250 lbs down to about 235 lbs).  Energy level was somewhat elevated but not dramatically, slept well during the night - a nice change for the better.

I plan to go back and do the entire 3-week regimen out of curiosity (I feel fine health-wise, fyi)...

Thank you for sharing your experience.  Did you make your own unit or from where did you purchase it?

I recently measured the frequency of my homemade unit.  It measures 4.17~4.18 Hz, (using a Fluke 25.)  This seems too high; higher than half of the lowest resonant Schumann frequency of 7.83 Hz.    However:
Quote
...the fundamental Schumann frequency fluctuates between 7.0 Hz. to 8.5 Hz. These frequencies vary from geological location to location, and they can even have naturally occurring interruptions.
http://www.lunarplanner.com/Harmonics/planetary-harmonics.html

Also, the Beck text say "~4 Hz" and "not critical."  So, I guess my frequency is just fine.  :)

helmut

  • Hero Member
  • *****
  • Posts: 723
    • in construction
Re: Robert C. Beck Biological Electrification Device
« Reply #10 on: March 01, 2008, 03:40:44 PM »
@all
The Topic of a new  sektion could be named:
 Free Health

@Rosphere
Do you kow of a circuit,that is using a NE555 Timer to do the Job?

helmut




Rosphere

  • Sr. Member
  • ****
  • Posts: 482
Re: Robert C. Beck Biological Electrification Device
« Reply #11 on: March 01, 2008, 04:30:52 PM »
@Rosphere
Do you kow of a circuit,that is using a NE555 Timer to do the Job?

Yes, see page 3 and page 4 of the PDF attached to the bottom of my first post.

My 1 oz. of 10 gauge 9999 silver wire has arrived.  :)

jacek

  • Newbie
  • *
  • Posts: 32
Re: Robert C. Beck Biological Electrification Device
« Reply #12 on: March 01, 2008, 07:10:44 PM »

  Did you make your own unit or from where did you purchase it?

@Roshere,

I built one myself per this schematic:  http://sharinghealth.com/beckprotocol/buildyourown.html
On the side note, the colloidal silver generator section is not being used anymore because I built another CS gen that alternates wire polarity automatically every 20 minutes or so. Saves the inconvenience of swapping the wires by hand (it's official - I am lazy  :))

Hope this helps, have fun, folks.

helmut

  • Hero Member
  • *****
  • Posts: 723
    • in construction
Re: Robert C. Beck Biological Electrification Device
« Reply #13 on: March 01, 2008, 07:13:59 PM »
@Rosphere
Do you kow of a circuit,that is using a NE555 Timer to do the Job?

Yes, see page 3 and page 4 of the PDF attached to the bottom of my first post.

My 1 oz. of 10 gauge 9999 silver wire has arrived.  :)

Thanks Rosphere
I had it here all ready,but did not know .sry

So you are producing colloidal silver as well?

Since 2 years i hav one here,but dit not drink it the silverwater ,because i was afraid
of using the destilled water from the supermarket.Somwere was writte,that the
Produkt would or could contain toxic elements.
Do you know more about the matter?

helmut
the

amigo

  • Hero Member
  • *****
  • Posts: 545
Re: Robert C. Beck Biological Electrification Device
« Reply #14 on: March 01, 2008, 11:00:50 PM »
I have spent many months experimenting with various circuits for production of CS. In all that time I have not tried any of my CS solutions, I'd simply measure the conductivity, look for the Tyndall effect but then never end up being happy about concentrations and scrap the whole batch.

Yesterday, I decided to try one of my CS solutions that I measured at 8.7ppm, which has been sitting on the shelf for the past two weeks. Since I was coming down with a cold I figured what a heck so last night I took about 40ml, then this morning another 30ml and another 20ml at noon.

Rest assured if you have never done this before you are in for an interesting experience, at least if my own example is a measure of anything. What happens is that CS will interact with the gastrointestinal tract and wipe it clean from all bacteria (good and bad ones alike). Plus you are in for quite a "gassy" ride...I'm still feeling lousy but I think my cold is progressing much faster than usual so I guess CS is doing something. :)

In retrospect, I feel that taking 40ml the first time was an overkill, I just simply did not know what's a standard doze people take. 10ml might be just enough to start with, see how it goes...also, have some pro-biotic yogurt handy to replenish the good bacteria in your digestive tract. ;)

And while on the CS note, does your solution have/leave a metallic taste when you swash it in your mouth? I suppose since there's nothing else in it but distiled water and silver it ought to be metallic.

Also, what's everyone's take on using a nebulizer to disperse the CS directly into lungs rather than consuming it through digestive system? Taking it through the lungs would guarantee that CS is immediately spread through the blood and reach all areas in a shortest time greatly increasing the effect. I'm yet to purchase a nebulizer and try though, not sure which brand to get (most likely off eBay).

As far as a Health group in here, we must make sure that there is a big fat disclaimer posted that all materials and information is presented for research purposes only, that it is free for all and in public domain, that cannot be commercialized and that no application of any device or substance should be replace prior consultation with your physician. Just the usual mambo-jumbo... :)