Storing Cookies (See : http://ec.europa.eu/ipg/basics/legal/cookies/index_en.htm ) help us to bring you our services at overunity.com . If you use this website and our services you declare yourself okay with using cookies .More Infos here:
https://overunity.com/5553/privacy-policy/
If you do not agree with storing cookies, please LEAVE this website now. From the 25th of May 2018, every existing user has to accept the GDPR agreement at first login. If a user is unwilling to accept the GDPR, he should email us and request to erase his account. Many thanks for your understanding

User Menu

Custom Search

Author Topic: Successful TPU-ECD replication !  (Read 1139089 times)

Mannix

  • elite_member
  • Hero Member
  • ******
  • Posts: 564
Re: Successful TPU-ECD replication !
« Reply #75 on: June 13, 2007, 03:06:39 AM »
Lindsay and all,

If it is wrong to question and doubt, then it is also wrong to blindly accept something as true.

Have you made the device and done the measurements? Are you 100% confident they are flawless? Have you simply accepted what someone told you as the truth, when there is little evidence to support that claim?

Perhaps you should ask yourselves this...would you bet your house on it? If not, then think again.

Darren



YES! and read the reports as I am not "qualified".

I do not have a house

now get on with it  We need you on the deck.

You other guys  are takling about money...a deal ...there is none here ...PLEASE ..enough!

BYE!

Im gone for a while...I'M not effective at this time.

Be very,very careful

I look foward to your "measurements" Darren
If there is anything that aquire that I think will help your saftey..rest assured you WILL recieve the information.


LM

bob.rennips

  • elite_member
  • Full Member
  • ******
  • Posts: 182
Re: Successful TPU-ECD replication !
« Reply #76 on: June 13, 2007, 03:08:23 AM »

I sometimes feel that people should either build it or be silent..the results will speak for themselves.....

Excellent point Mannix.

When will you be posting photos of your build ?
Or insights from your oscilloscope measurements ?
Or a schematic perhaps ?

I can't recall EVER seeing anything on any build projects you have done ?

Why are you holding back your information from your build projects ?

Or is because you don't have any ?



chrisC

  • Hero Member
  • *****
  • Posts: 1414
Re: Successful TPU-ECD replication !
« Reply #77 on: June 13, 2007, 03:24:26 AM »
Hey lets be fair about this.   

Would you accept a car without kicking the tires first? 


@kokomoJ0

Hey, I went through buying 7 cars and yet to kick any tires! Somehow our assesment of what is worthy is really, just that!

A long time ago, Jesus said in parables to people of those days and I quote: (Matthew 13:11-14)

11He replied, "The knowledge of the secrets of the kingdom of heaven has been given to you, but not to them. 12Whoever has will be given more, and he will have an abundance. Whoever does not have, even what he has will be taken from him. 13This is why I speak to them in parables:
   "Though seeing, they do not see;
      though hearing, they do not hear or understand. 14In them is fulfilled the prophecy of Isaiah:
   " 'You will be ever hearing but never understanding;
      you will be ever seeing but never perceiving.

I am quoting the above scripture not to start a flame war. It's intent is just to prove in this world there will always be two views of the coin, even though the coin has fallen on the right side!

Cheers

chrisC

kokomoj0

  • Guest
Re: Successful TPU-ECD replication !
« Reply #78 on: June 13, 2007, 03:34:23 AM »
Hey lets be fair about this.   

Would you accept a car without kicking the tires first? 


@kokomoJ0

Hey, I went through buying 7 cars and yet to kick any tires! Somehow our assesment of what is worthy is really, just that!

A long time ago, Jesus said in parables to people of those days and I quote: (Matthew 13:11-14)

11He replied, "The knowledge of the secrets of the kingdom of heaven has been given to you, but not to them. 12Whoever has will be given more, and he will have an abundance. Whoever does not have, even what he has will be taken from him. 13This is why I speak to them in parables:
   "Though seeing, they do not see;
      though hearing, they do not hear or understand. 14In them is fulfilled the prophecy of Isaiah:
   " 'You will be ever hearing but never understanding;
      you will be ever seeing but never perceiving.

I am quoting the above scripture not to start a flame war. It's intent is just to prove in this world there will always be two views of the coin, even though the coin has fallen on the right side!

Cheers

chrisC


well there you have it.  who can argue now that god is in the picture!

Of course there is always the one that goes something like pick the log out of your own eye before picking the speck out of mine.

Ask for data and what do i get?  obfuscation and hyperbole from mannix and a sermon from you.

All i want is data from otto or jason or anyone else involved in the believed to be working tpu but you and others for what ever reason prefer to attack me for asking for what is perfectly reasonable.





z_p_e

  • elite_member
  • Hero Member
  • ******
  • Posts: 651
Re: Successful TPU-ECD replication !
« Reply #79 on: June 13, 2007, 03:34:23 AM »
Chris.

Indeed there is....and it has.
 ;)

z_p_e

  • elite_member
  • Hero Member
  • ******
  • Posts: 651
Re: Successful TPU-ECD replication !
« Reply #80 on: June 13, 2007, 03:39:59 AM »
Koko,

You are being reasonable, as I feel I am being too.

However, the other school of thought feels they are being reasonable too. There's no reason why we can't coexist is there?

We have different opinions and approaches. One side will never convince the other, so perhaps let's just call a truce, and let both sides proceed as they will.

In the end, hopefully the answers will be revealed, and the issue settled once and for all.

Darren

chrisC

  • Hero Member
  • *****
  • Posts: 1414
Re: Successful TPU-ECD replication !
« Reply #81 on: June 13, 2007, 03:43:46 AM »
darren & koko:

Good point Darren. We're here for a reason. To seek the truth and there is only one truth. Ya?

So, let us all work together, build some TPU's and contribute our resources.

Cheers

chrisC

hartiberlin

  • Administrator
  • Hero Member
  • *****
  • Posts: 8154
    • free energy research OverUnity.com
Re: Successful TPU-ECD replication !
« Reply #82 on: June 13, 2007, 03:49:14 AM »
Hi All,
just got an email from Jason,
telling me, that he only got 1.5 hours sleep last night and that he has
to work on some school exams in the next days, so it will take
some time, until he gets again to his TPU-ECD.
So please be patient with new measurements from him.

Regards, Stefan.

bob.rennips

  • elite_member
  • Full Member
  • ******
  • Posts: 182
Re: Successful TPU-ECD replication !
« Reply #83 on: June 13, 2007, 03:54:15 AM »
Whilst waiting on the exact driver as used by Jason I thought I'd do a couple of tests.

I wanted to see if I could capture what was happening, signal wise, when say a 90khz and 180khz was 'mixed' in a coil.

To do this I wrapped a standard solenoid coil. This is the mixed signal coil. On top of this two parallel wires wrapped together to produce another two coils. i.e. As if wrapping a bifilar coil.

Into the two parallel wrapped coils I fed 90hz into one and 180hz into the other. The attached image shows the 180hz on the top trace, the 90hz I've drawn in in red, the bottom trace is the resultant output. The drawn in red line on the lower trace is the 0V level.

The staircase on the output goes down because the input signal are synchronised on a rising edge. I'll try moving the input signal to synchronise on the trailing edge so that the staircase goes up.

If this output were DC shifted up say 100V, you would have a situation where, in the case of a rising staircase, you would have progressive dc pulses WITHOUT A CURRENT REVERSAL. We know from Tesla that Radiant Energy occurs when pulses are applied in such a way that their is no current reversal... Further more, if this staircase effect was to occur on a high voltage spike, due to further mixing with other coils and you have the situation where you are generating high voltage DC, non reversing pulses.

I think part of the puzzle is to get this staircase effect happening on the leading edge of very high voltage BEMF pulses.

EDIT: I had the AC button pressed on my scope instead of the DC. I've therefore redrawn the 0V level on the attached image. The 0V level is at the bottom of the lower trace NOT centered on the lower trace.
« Last Edit: June 13, 2007, 06:34:39 AM by bob.rennips »

Merkhava

  • Newbie
  • *
  • Posts: 9
Re: Successful TPU-ECD replication !
« Reply #84 on: June 13, 2007, 03:57:32 AM »
Hi All,

As for me and my thinking of this, the goal of the project to replicate the TCU is NOT to make reward money or figure out who gets control or fame for it. Let the Most High God figure all that out for us when the proper time comes.

This project is about changing the world. The current modern paradigm based on the use of fossil fuels  as energy and chemical explosion as our machinery prime mover... well, let's just say it is a tragic dead end waiting to devastate us. Peak global oil production has probably already occurred, but demand for oil is increasing exponentially as China, India, and much of the Third World modernize. They are seeking the same resources we have cheaply taken for granted for the last 100 years.

If the fossil fuel paradigm remains unchallenged by any new energy technology, then we are headed for more devastating wars (like Iraq) and an eventual, rapid and very harsh economic decay that will put us all back to riding horses and camels again. This could all happen within our lifetimes at the current rate demand growth compared to energy production. See the attached Peak Oil PDF.

Now I know... this particular thread is all about replication and experimental facts, so this will be my last "speech". But I must say replication for the sake of replication is not enough. We must do replication with an inspiring vision. It must be a bigger vision than just some invention for our own selfish enrichment and ego stroking. We must have a vision of saving our world and pushing human civilization further along to newer heights for the sake of our children and our children's children. The world has more than 6 billion souls. Consider your own education, profession, income and individual wealth and most of us in this forum are probably representing the top tenth percentile compared to the rest of the total human population. If we can not find the altruistic motivation and illumination to pursue a lofty vision for the future that is greater than ourselves, then what can we expect of the other 90% of our neighbors on this planet? So let us replicate this technology with vision, with purpose and with passion!!

We must shift the paradigm from a fossil fuel basis to a Radiant Energy paradigm. And when success is truly in our hands, then let us virally spread it throughout the world like a new "gospel" using face to face interactions and the wonderful internet technology that we have available to us. Let us change the world and free ourselves from the poverty, misery and warfare brought to us by Dirty Oil!

I for one have been supremely inspired by SM's videos and also Otto-Roberto's and Jason's recent replications. I will work on this myself. And as I achieve my own success I will no doubt give this knowledge away and teach it to anyone willing to listen.

May God help us all in this endeavor!
Robby

kokomoj0

  • Guest
Re: Successful TPU-ECD replication !
« Reply #85 on: June 13, 2007, 04:05:46 AM »
I agree and with that thought in mind i also highly recommend checking out ironheads hydrogen thread for an excellent example of how to make massive hydrogen.

We will never run out of water!

http://www.youtube.com/watch?v=DoEXaNnBRPo

http://www.overunity.com/index.php/topic,2057.0.html




xilusma

  • Newbie
  • *
  • Posts: 35
Re: Successful TPU-ECD replication !
« Reply #86 on: June 13, 2007, 05:03:58 AM »
A very good replication.. I wish I had mine as bright as yours ..

Anyway, the game is just started .. any one care to joint ?  ;D

Hope to complete mine soon ... (or might be not  :'( ) ...

Good hunting mate ...

IronHead

  • elite_member
  • Hero Member
  • ******
  • Posts: 970
Re: Successful TPU-ECD replication !
« Reply #87 on: June 13, 2007, 05:59:15 AM »
Hold on to your hats , it's about to get weird in here.

Go easy guys

Rosphere

  • Sr. Member
  • ****
  • Posts: 482
Re: Successful TPU-ECD replication !
« Reply #88 on: June 13, 2007, 06:00:44 AM »
Hi All,
just got an email from Jason,
telling me, that he only got 1.5 hours sleep last night and that he has
to work on some school exams in the next days, so it will take
some time, until he gets again to his TPU-ECD.
So please be patient with new measurements from him.

Regards, Stefan.

I agree.  Let the man rest awhile,... even after his exams are behind him.

I get tired just watching him.   ;)

otto

  • elite_member
  • Hero Member
  • ******
  • Posts: 1215
Re: Successful TPU-ECD replication !
« Reply #89 on: June 13, 2007, 11:40:50 AM »
Hello all,

it should be clear that my setup is MY favorit in this moment. SM told us that there are a lot of ways to built a good TPU. So, in a very short time, I suppose, there will be TPUs like the open one with the controlls wound all over the collector and a few other types.

I only wanted to give the basic setup that I have. Its on you to find other possibilities to built a good TPU.

Otto