Free Energy | searching for free energy and discussing free energy

Solid States Devices => Kapanadze devices and replications => Topic started by: Belfior on December 01, 2017, 09:17:59 PM

Title: Andre Fabrice replication
Post by: Belfior on December 01, 2017, 09:17:59 PM
Do people have any information on this fellow and his work?

https://www.youtube.com/watch?v=B6hVasVR7AI

Title: Re: Andre Fabrice replication
Post by: AlienGrey on December 01, 2017, 09:52:55 PM
Do people have any information on this fellow and his work?

https://www.youtube.com/watch?v=B6hVasVR7AI
He did have a youtube channel about PWM old ones extracted from microwave ovens you
might also find stuff others have published about his work too none of it helpful though.

Not much help sorry, some of that stuff is a good few years old now, hey why not pay him a visit ?

AG

Title: Re: Andre Fabrice replication
Post by: Belfior on December 01, 2017, 10:36:19 PM
He did have a youtube channel about PWM old ones extracted from microwave ovens you
might also find stuff others have published about his work too none of it helpful though.

Not much help sorry, some of that stuff is a good few years old now, hey why not pay him a visit ?

AG

I came across his lab notes and some info so I was just wondering if it is worth to look at
Title: Re: Andre Fabrice replication
Post by: Jeg on December 02, 2017, 12:56:05 PM
Hi Belfior
Thanks for sharing this video. Do you have an approximate idea of what the driving circuit could be? Do we know out of other Kapanadje videos if the copper tube has a slit along its length? 
Title: Re: Andre Fabrice replication
Post by: Belfior on December 02, 2017, 03:27:55 PM
Hi Belfior
Thanks for sharing this video. Do you have an approximate idea of what the driving circuit could be? Do we know out of other Kapanadje videos if the copper tube has a slit along its length?

No problem Jeg. Found it accidentally. I think more than the driving circuitry what should be figured out is that is this guy just full of shit? What does does 3 coils over a copper tube covered with ferrite toroids do, that you are suddenly able to pull 2kW out of it? What it means in my mind is that the 2 outer coils are pulsed so that the pick up coil in the centre get more magnetic flux than the 2 coils produce together. If the tube is grounded how are the toroids going to produce this magnetic effect? Toroids keep the B field inside, but only if you coil them up. So I can't see anything here that would account for the excess energy.

I have to go over his lab notes and drawings to see, if there is anything there to validate his claims.
Title: Re: Andre Fabrice replication
Post by: Belfior on December 02, 2017, 03:35:21 PM
Shitload of videos I haven't seen before. English guy visiting Tariel and some schematics + Fabrice 2kW schematics

http://chomikuj.pl/DonaldKapanadze

Title: Re: Andre Fabrice replication
Post by: Belfior on December 02, 2017, 03:43:05 PM
And that site is in Polish... I swear to God if I ever find free energy I will publish it in a forgotten Finnish dialect!

I want to get all that material of that site, but I can't even figure out if I need to pay money for it or not?

Maybe I need to get some vodka and a turnip, and I will magically understand polish.
Title: Re: Andre Fabrice replication
Post by: Jeg on December 02, 2017, 08:03:25 PM
I swear to God if I ever find free energy I will publish it in a forgotten Finnish dialect!


Nice idea  :D  :D

Looks like what ruslan does. Low frequency power signal and HF mixed in time. Andre painted his copper rod with ''oxide adhering tightly sealed'' as he says. Do you know what is that for?
Title: Re: Andre Fabrice replication
Post by: forest on December 02, 2017, 10:40:45 PM
And that site is in Polish... I swear to God if I ever find free energy I will publish it in a forgotten Finnish dialect!

I want to get all that material of that site, but I can't even figure out if I need to pay money for it or not?

Maybe I need to get some vodka and a turnip, and I will magically understand polish.


Well.Yes you need money because this site is for personal data storage, while downloading others data over 1MB require some kind of monthly subscription fee.
Title: Re: Andre Fabrice replication
Post by: Void on December 02, 2017, 11:11:07 PM
I have never seen any video regarding Fabrice Andre that showed anything that looked
convincingly like over unity. I haven't heard anything new about him in a couple of years however.
I don't know if he has come out with anything more convincing in the last couple of years.
What he showed a few years ago didn't seem to indicate anything other than he was experimenting
with a Kapanadze setup, and he gave no indication what he was basing his circuit design on.
No signs of OU in the videos of him that I saw. :)

All the best...
Title: Re: Andre Fabrice replication
Post by: Belfior on December 02, 2017, 11:30:06 PM
Nice idea  :D  :D

Looks like what ruslan does. Low frequency power signal and HF mixed in time. Andre painted his copper rod with ''oxide adhering tightly sealed'' as he says. Do you know what is that for?

Well it was subtitled by a "professional translator"! What that apparently means is that this person can use Google Translate... Kinda makes me think he insulated the copper pipe with a varnish to give it more "Tesla radiant energy vibe" like in the Tesla patent where there is a shiny insulated copper plate. Now that would mean the extra energy comes from ions. Does not sound right.

I still want to know how is this (grounded?) copper pipe filled with toroids inside the coils is going to give out extra energy?

Now this guy at least gives a long speech with his video https://www.youtube.com/watch?v=Rt2K9yxch1A but since the vodka and turnips do not work I have no idea what he is saying...
Title: Re: Andre Fabrice replication
Post by: Jeg on December 03, 2017, 10:40:48 AM

I still want to know how is this (grounded?) copper pipe filled with toroids inside the coils is going to give out extra energy?


It looks that it has two uses. Torroids are for helping 50Hz magnetic field to be developed. Copper pipe in combination with the torroids form a capacitor one plate of which (copper rod) is grounded.

Attached is this weird spiral which Andre uses to boil some water. Is that a simple resistance heater? Or something else?? 
Title: Re: Andre Fabrice replication
Post by: Belfior on December 05, 2017, 08:53:45 AM
I think it is a simple resistance heater. No need to transform to 50Hz with heaters and bulbs

Here he explains the parts of the TK device

http://www.magistrala.cz/freeenergy/2013/04/16/130413-kapagen-components-explanation-by-fabrice-andre-at-refuge7-lodge-in-france/

Title: Re: Andre Fabrice replication
Post by: NickZ on December 07, 2017, 11:12:07 PM
   Jet:
  The spiral is an electric kitchen stove heating element.  Can be 110, or 220v.
Title: Re: Andre Fabrice replication
Post by: Jeg on December 08, 2017, 11:10:16 AM
Thanks you Belfior, NickZ ;)
Always impresses me when i see wattage resistors as output loads. I'll salvage a stove to get some loads of this kind. Tnks again
Title: Re: Andre Fabrice replication
Post by: forest on December 09, 2017, 03:49:14 PM
http://overunity.com/13379/kapanadze-replication-documents-from-fabrice-andr-surfaced/
Title: Re: Andre Fabrice replication
Post by: Belfior on December 11, 2017, 11:32:50 AM
Now is there something I do not understand, or is overunity so easy as it seems?

You take a high voltage device that already expresses over unity like this

https://www.aliexpress.com/item/3-6V-High-Pressure-Generator-Module-Igniter-1-5A-Output-Voltage-20KV-20000KV-Boost-Step-up/32803789310.html?spm=2114.search0104.3.9.AAhI3Z&ws_ab_test=searchweb0_0,searchweb201602_3_10152_10065_5000015_10151_10344_10068_10345_10342_10343_51102_10340_10341_5130015_10541_10084_10083_10304_10307_10302_10539_5080015_10312_10059_10313_10314_10534_100031_10604_10603_10103_10605_10594_5060015_10596_10142_10107,searchweb201603_14,ppcSwitch_5&algo_expid=f17a414b-2af9-4886-86e5-da45048808fc-1&algo_pvid=f17a414b-2af9-4886-86e5-da45048808fc&rmStoreLevelAB=0

Input power is 6V DC and current 1,5A. Output is 20000V and 0.05A. That is 6W converted to 1kW. Now that does not have to be continuous power. Just put it through a spark gap as a pulse and secondary will see a sine wave. Use air core (like TK) so there are no core saturation problems or heating problems. So now you got 20kV that needs to be transformed.

Transformer secondary does not know if the power on the primary was 1A 1000V or 1000A 1V. It only sees the flux density. So 20kV (or what ever the air cored transformer output was. Could be 100kV if resonance) possibly at a nonconvenient frequency needs to be transformed. You could put that through a transformer, but the freq and high voltage could result in high losses. So you got to DC first with full bridge rectifier and a couple of ripple caps.

Now you got 20-100kV DC. You pulse that through a spark gap to a step-down transformer, but only so that the secondary coil sees low freq like 60Hz. You now have stepped down to 230V 60Hz.

So what you need is just resonance at some point, so you have gain. With high voltage the gain is larger. That will compensate all the losses in occur in the transformers etc. What you also need is a means to separate added load from affecting the resonance.

https://en.wikipedia.org/wiki/Decoupling_capacitor