Free Energy | searching for free energy and discussing free energy
Mechanical free energy devices => mechanic => Topic started by: Low-Q on September 09, 2017, 12:01:56 AM
-
Hello.
I got a gear pump from a oil pump today. Big enoug to fit my magnets on. Inside this pump, there is two gears. One inner with 6 teeth, and one outer with seven teeth. Perfectly matched to make expanding pockets on one side at low pressure, and shrinking pockets on the high pressure side.
What I want to check out, is instead of using oil flow to achieve rotation, I want to use magnetic fields as the high and low pressure.
To achieve this, the small gear inside will have one magnet on each sides where the same pole, say North, is facing the gear.
This way, the six teeth will have South pole around its circumference like a radially magnetized magnet would have.
The large gear with its seven inner gears is surrounded by North facing magnets on one side, and South facing magnets on the other side.
This will result in attraction between inner and outer gear on one side, and repulsuion on the other side.
Since the gears are eccentrical, the inner South magnetized gear is forced to "roll" towards the North pole in the outer gear, with repulsion on the other side.
The magnets outside the outer gear is fixed, and the outer gear is free to rotate inside that field. This will keep orientation of North and South fixed even if the outer gear is spinning.
The test is about learning how mahnetic fields behaves in a configuration like this.
I will explain more later, but I attach pictures of the principles.
Pleas ask if you have questions, or comment if you have any suggestions.
-
Just remember to give it lots of lubrication. They usually run in an oil rich environment. Once did a soap dispenser with one of these. Just had to pull the outer cap once a month and clean up with water and a new piece of gasket. Hand crank on the end and worked great.
-
Yup. I'll keep it lubricated. Have som silicon oil which is very slippery.
Metal parts like these do stick together with lots of friction when they are magnetized.
I dont expect a smooth runner, but maybe it's possible to manually turn it around to notice different torque in each direction :)
Vidar
-
This design is so stuck by the powerful magnets. It is hard to turn it around, even with lubrication. Without magnets, it is spinning freely.
If anyone have an idea of making this smoother, you're welcome to contribute :)
Vidar
-
appropriate use : for the needed use the right magnetic force
( the Flynn brothers searched at first with neodymium and returned to C8/5 ferrit magnets)
"the crux" with permanent magnets ( fix force) has the electro magnets(variable force) as solution (or mixed use)
more/less twenty years before I reed about this publication and saw the positive and negative functions from the device:
https://worldwide.espacenet.com/publicationDetails/mosaics?CC=DE&NR=4033061A1&KC=A1&FT=D&ND=3&date=19920423&DB=EPODOC&locale=en_EP# (https://worldwide.espacenet.com/publicationDetails/mosaics?CC=DE&NR=4033061A1&KC=A1&FT=D&ND=3&date=19920423&DB=EPODOC&locale=en_EP#)
it is ever worthfull to also read cited and citing documents,often you will find estatal(f.e ESA,NASA) and great companies their employees
working forward on private developper and inventor their basic finds
think modular(cascading) : Ernie Byron Esters
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=us&AP=&PR=&PD=&PA=&IN=esters&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=us&AP=&PR=&PD=&PA=&IN=esters&CPC=&IC=&Submit=Search)
easy data scan to C.A.D. to C.N.C. to C.I.M. project
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=li+yng+tyan&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=li+yng+tyan&CPC=&IC=&Submit=Search)
f.e. by mill to C.N.C-mill : https://www.maxnc.net/ (https://www.maxnc.net/)
or to 3D-printer
for greater parts:
f.e.
https://www.google.pt/search?q=herbak+zsolt+patent&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=hrCzWeblEM_v8Af-x7zAAQ (https://www.google.pt/search?q=herbak+zsolt+patent&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=hrCzWeblEM_v8Af-x7zAAQ)
https://www.google.pt/search?client=firefox-b&dcr=0&q=herbak+zsolt+modellbau&oq=herbak+zsolt+modellbau&gs_l=psy-ab.12...118757.124230.0.125866.15.13.0.0.0.0.417.1732.0j10j4-1.11.0....0...1.1.64.psy-ab..4.8.1351...0i22i30k1j33i160k1.I4AvKr53SVg (https://www.google.pt/search?client=firefox-b&dcr=0&q=herbak+zsolt+modellbau&oq=herbak+zsolt+modellbau&gs_l=psy-ab.12...118757.124230.0.125866.15.13.0.0.0.0.417.1732.0j10j4-1.11.0....0...1.1.64.psy-ab..4.8.1351...0i22i30k1j33i160k1.I4AvKr53SVg)
for vehicles,small tiny houses and more and
Motor, Expander, Compressor, and Hydraulics (MECH) all-in-1 units
http://www.solterrah.com/dr-mel-prueitt.php (http://www.solterrah.com/dr-mel-prueitt.php)
http://www.solterrah.com/mech-engine.php (http://www.solterrah.com/mech-engine.php)
or https://www.youtube.com/watch?v=ZGiviT-C_oY
heat pumps with C.O.P. 1000 X ,impossible ? Conventional average C.O.P. 3X and capacitive winding motor (f.e. 220V/68mA for 5 KW force)
-
Hi there,
In which direction is the magnets polarized?
Radially
Along circumference
Along rotor axis
Vidar
appropriate use : for the needed use the right magnetic force
( the Flynn brothers searched at first with neodymium and returned to C8/5 ferrit magnets)
"the crux" with permanent magnets ( fix force) has the electro magnets(variable force) as solution (or mixed use)
more/less twenty years before I reed about this publication and saw the positive and negative functions from the device:
https://worldwide.espacenet.com/publicationDetails/mosaics?CC=DE&NR=4033061A1&KC=A1&FT=D&ND=3&date=19920423&DB=EPODOC&locale=en_EP# (https://worldwide.espacenet.com/publicationDetails/mosaics?CC=DE&NR=4033061A1&KC=A1&FT=D&ND=3&date=19920423&DB=EPODOC&locale=en_EP#)
it is ever worthfull to also read cited and citing documents,often you will find estatal(f.e ESA,NASA) and great companies their employees
working forward on private developper and inventor their basic finds
think modular(cascading) : Ernie Byron Esters
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=us&AP=&PR=&PD=&PA=&IN=esters&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=us&AP=&PR=&PD=&PA=&IN=esters&CPC=&IC=&Submit=Search)
-
" permanent magnetic force device negativ function" : not universal = ccw and or cw
Your question,low-Q, depends from your/the operative direction wish :
think about the difference between DC-motor (ccw and cw possible)and AC-motor (ccw or cw) use
-
Ok. So direction is depending on the direction of polarity.
I have one more thought:
After analyzing the design, at 12 o'clock it would not be possible to determine which direction the rotor will go. When the rotor is forced ccw it will run ccw for a while, guessing a half cycle, and vica verca.
The magnets in the rotor is trying to find equilibrium through the 14 inner iron pieces and the 13 outer ones. At 6 o'clock the pieces starts to line up again, and again the rotor can't decide where to go, ccw or cw.
I have done a simulation on a very similar design in FEMM a few years ago. There is ccw torque ona half cycle, and cw torque the other half which adds up in zero torque in one complete cycle.
Another issue is that the polarization did not have any influence in the result. 0 torque in total.
Do you have any thoughts about this?
" permanent jmagnetic force device negativ function" : not universal = ccw and or cw
Your question,low-Q, depends from your/the operative direction wish :
think about the difference between DC-motor (ccw and cw possible)and AC-motor (ccw or cw) use
-
http://jnaudin.free.fr/html/qedynmnu.htm (http://jnaudin.free.fr/html/qedynmnu.htm)
especially:
http://jnaudin.free.fr/html/2magpup.htm (http://jnaudin.free.fr/html/2magpup.htm)
solution: kineto-mechanical "spiral(centrifugal/centipetal)" or electro magnetic pulse device
amplified magnetic force : from Hallbach to Ronbach array
https://www.bing.com/search?q=sankar+pat+patent&PC=U316&FORM=CHROMN (https://www.bing.com/search?q=sankar+pat+patent&PC=U316&FORM=CHROMN)
f.e. http://www.freepatentsonline.com/y2011/0241349.html (http://www.freepatentsonline.com/y2011/0241349.html)
similar Flynn Research Group http://www.rexresearch.com/flynn/flynn.htm (http://www.rexresearch.com/flynn/flynn.htm) developments
https://web.archive.org/web/20040505174215/http://flynnresearch.net/ (https://web.archive.org/web/20040505174215/http://flynnresearch.net/)
https://web.archive.org/web/20040405085515/http://flynnresearch.net:80/Table_of_Contents.htm (https://web.archive.org/web/20040405085515/http://flynnresearch.net:80/Table_of_Contents.htm)
http://magnetmotor.go-here.nl/charles-j-flynn/
http://geminielectricmotor.com/About%20the%20Gemini%20Technology.htm (http://geminielectricmotor.com/About%20the%20Gemini%20Technology.htm)
http://www.rexresearch.com/flynn/Ppfigure3.gif (http://www.rexresearch.com/flynn/Ppfigure3.gif)
and the electric conduction with:
http://www.google.com/patents/US7411363 (http://www.google.com/patents/US7411363)
http://www.overunity.com/12081/jackh-where-are-you/ (http://www.overunity.com/12081/jackh-where-are-you/)
http://overunity.com/2386/controller-circuit-for-hilden-brandt-motor-needed/ (http://overunity.com/2386/controller-circuit-for-hilden-brandt-motor-needed/)
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=jack+hildenbrand&CPC=&IC=&Submit=Search (https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=&IN=jack+hildenbrand&CPC=&IC=&Submit=Search)
Sincerely
OCWL
-
Hi there,
I took a look at the second link. The magnets with opposing poles. The difference in force head on vs sliding in.
The peak forces are different, but the average force is exactly the same.
Try to lift a 1 ton car 10cm straight up. You can't.
Roll that car up a ramp while spending 20m distance to roll it up 10cm. That's fine.
My point is, when sliding the magnets sideways, you spend more distance around the peak force.
The example of the crankshaft:
When the piston like magnet moves up as the sliding magnet approaches, that magnet will under load take time to rise. This increase the initial force. When the sliding magnet leaves, it leaves with less repulsion because the loaded piston magnet needs time to fall down.
That means you need input energy that corresponds 100% with the load.
No overunity.
The other google search links takes too much time to search through.
Vidar
-
permanent magnet /electro magnetic B/EMF
translation option in the espacenet-site included :
https://worldwide.espacenet.com/publicationDetails/description?CC=DE&NR=3900890A1&KC=A1&FT=D&ND=3&date=19900719&DB=EPODOC&locale=en_EP (https://worldwide.espacenet.com/publicationDetails/description?CC=DE&NR=3900890A1&KC=A1&FT=D&ND=3&date=19900719&DB=EPODOC&locale=en_EP)
Bei der Belastung der Lastspule tritt nach der Lenzschen Regel eine der Drehrichtung des Rotors entgegenwirkende Kraft auf. Diese auf den Rotor wirkende Bremskraft wird aber durch zwei Umstände stark in ihrer Wirkung eingeschränkt: 1) Es ist bekannt, dass der Kraftaufwand von zwei aufeinander wirkenden Magneten sehr viel geringer ist, wenn die Magnete seitlich zueinander verschoben anstatt abgerissen werden. Diesen Umstand macht sich der mechanische ferromagnetische Energiewandler zunutze. [/size]2) Im vorliegenden Fall werden nicht zwei aufeinander wirkende Magnete getrennt, sondern der bestehende Magnetfluss wird vom einen Jochschenkel zum anderen verlagert, ohne unterbrochen zu werden. Als nicht dargestellte Alternative können auch anstelle der Dauermagnete gleichstromgespeiste Elektromagnete verwendet werden. Dies ist deshalb möglich, weil mit hohen Windungszahlen der Magnetspulen und niedrigen Spannungen sehr starke Magnetfelder erzeugt werden können, die dann in der Form des oben beschriebenen Energiewandlers grosse Mengen magnetischer Energie nutzbar machen.
http://overunity.com/17432/athena-generator-construction-and-instructions/msg510555/#new (http://overunity.com/17432/athena-generator-construction-and-instructions/msg510555/#new)
2.nd video : https://www.youtube.com/watch?v=_kl5xqeA20Y (https://www.youtube.com/watch?v=_kl5xqeA20Y)
efficiency number ?
::) Try to lift a 1 ton car 10cm straight up. You can't. ::)
You ever heared about someone named "Archimedes" and his lifting device ?
Zug- versus Hub- Kraft
-
"Try to lift a 1 ton car 10cm
straight up. You can't."
Hahaha think horizontal lanca
-
My point is, to be clear; you have more length, rotary or linear to counterforce the slidig magnet.
If you plot a graph for both cases, sliding and facing. Then find the area inside the curve over and under the center line.
This area is the product of force and displacement.
You will be surprised that the area in both graphs match perfectly.
Archimedes lifting device makes it manageable to lift water by doing it along a slope instead of lifting it up vertically. Except that his first built "screws" suffered from lots of friction (I have tested a poor replica in Denmark this summer), the applied potetial energy in the water is exactly the same.
This applies to the magnets as well. Sliding the magnet applies a potential energy that is equal to the applied potential energy when facing the magnet.
So the erergy output cannot be higher than the input.
Vidar
-
"....... match perfectly."
ccw screw shaft cw screw
hurrikan Auge hurrican
http://www.pesquisa-unificada.com/pesquisas/vortex/ (http://www.pesquisa-unificada.com/pesquisas/vortex/)
Kreis-Aussen-Flaeche
the difference between an 1m-10m-100m rotor in windparks?
a rpm x sqm
b rpm x d
c rpm x U
https://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19860619&DB=EPODOC&locale=en_EP&CC=DE&NR=3602039A1&KC=A1&ND=4# (https://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19860619&DB=EPODOC&locale=en_EP&CC=DE&NR=3602039A1&KC=A1&ND=4#)
-
I have done some more experiments with the magnetic gear assambly.
The magnets around the outer gear are further away now.
Easier to rotate it together with the inner gear.
I can honestly say that there is still much friction, but much less. However, I can turn the rotors with a ceramic screwdriver inside the open pockets between the rotors.
I can easily feel that more force is required to turn the rotors ccw than cw direction.
When I flip the magnet which magnetize the inner rotor, I must apply more force in the other direction. In other words, it corresponds to what I expect from the design.
That said, I'm not 100% sure if the rotors some how have more friction one way than the other, depending on polarity of the inner rotor. So now I have printed out a crank that is glued on the outer rotor. I will do the same with the inner rotor.
It remains some more test before I can confirm the final results.
Attached picture was taken during the making of the new gear frame with magnet compartments.
Vidar.
-
I made a short video.
It does not measure anything, just showing the crancks on each rotor.
Both the inner and outer gear resist more one way than the other. Don't yet know how to interpret this simple test.
https://youtu.be/r9SBEiTe72g
Vidar
-
Is this distant freedom-e really satisfying you ?
http://overunity.com/17435/gear-pump-and-magnets/dlattach/attach/165171/ (http://overunity.com/17435/gear-pump-and-magnets/dlattach/attach/165171/)
Play with "la 'FEMM'e",
instead your "aurora wheel" with a round wheel with 4 magnets between shaft and wheel outside forming a "cruise/Kreutz",
a.diagonal and b.diametral
use probably a multi-arms/legs ccw or cw swastika knowledge !
Have a fine Sunday
OCWL
p.s.: mater - matriz - matrix
https://worldwide.espacenet.com/publicationDetails/mosaics?CC=DE&NR=1626565A1&KC=A1&FT=D&ND=4&date=19701029&DB=EPODOC&locale=en_EP
e'klee
more from Max Mueller Frieedrich
https://worldwide.espacenet.com/searchResults?AB=&AP=&CPC=&DB=EPODOC&IC=&IN=&PA=max+mueller+friedrich&PD=&PN=&PR=&ST=advanced&TI=&bcId=1&locale=en_EP&page=0&return=true
https://worldwide.espacenet.com/searchResults?submitted=true&locale=en_EP&DB=EPODOC&ST=advanced&TI=&AB=&PN=&AP=&PR=&PD=&PA=bierbaumer&IN=&CPC=&IC=&Submit=Search
I hope that you does not need this "neurophone-like" treatment :
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=15&ND=3&adjacent=true&locale=en_EP&FT=D&date=19990812&CC=WO&NR=9939751A2&KC=A2#
https://www.google.pt/search?q=hans+peter+bierbaumer&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=jZq0WfunEqWp8weRoYf4BQ
-
http://azbusinesslink.com/category/27077.html (http://azbusinesslink.com/category/27077.html)
You have to become di-/bipolar in thinking,
seeing things/objects from outside and feeling from the object middle inside to get the right,later by optimization, near perfekt result.
That is LOGOS,logere :beiwohnen,inne sein ( become virtual the objekt 4/...dimensional)
EINS-SEIN
To differ from : habere= to have and habitare= to live(in)
Each programmer is doing this: The construction of an virtual "Habitat" for letters and numbers ,
and a 3d-c.a.d.-programm need such behaviour and mental manner.
inter-legere intel-legere inter-lego inter-lexi interlectum intelligente
Einsicht, Verständnis,Illumination
https://patents.google.com/patent/US6172941B1/en (https://patents.google.com/patent/US6172941B1/en)
You are well equipped with 4d-lab instruments and motivated : self-organize yourself
https://www.bing.com/images/search?q=xyz-koordinatensystem&qpvt=xyz-koordinatensystem (https://www.bing.com/images/search?q=xyz-koordinatensystem&qpvt=xyz-koordinatensystem)
"vidar",this Non-sense is about "Yourself" and humankind : NLP
Neuronal-Lingual-Programming
https://en.wikipedia.org/wiki/Neuro-linguistic_programming (https://en.wikipedia.org/wiki/Neuro-linguistic_programming)
Who program(m)ed you in all your live to become how you think "you are: .." ?
The other google search links takes too much time to search through.
Begin with an " I am ....." listage ! ( under stress ? ;D :-\ ;) )
Then think/decide what you call "non-sense",sem sentido= neither concrete nor abstrakt ={ }
no sound/recall
leere Menge(-n-Lehre)
https://de.wikipedia.org/wiki/Mengenlehre (https://de.wikipedia.org/wiki/Mengenlehre)
https://de.wikipedia.org/wiki/Kybernetik (https://de.wikipedia.org/wiki/Kybernetik)
sensitive learning :
http://web.archive.org/web/20071004041426/http://sensortime.com (http://web.archive.org/web/20071004041426/http://sensortime.com)
I will leaving now your thread/theme but this points above are clearly for all threads and themes guilty and finally: Nobel-award,"asymmetry(is perfection,no end=endless)
https://www.bing.com/images/search?q=archimedes+hebel&qpvt=archimedes+hebel (https://www.bing.com/images/search?q=archimedes+hebel&qpvt=archimedes+hebel)
not only water related : the lever laws
energy R&B :TrueScale
https://www.bing.com/search?q=meta-c+dinnan+patent&PC=U316&FORM=CHROMN
Have a good,from me no more disturbted, time and well success in your live-life
OCWL
-
IancaIV, if you cannot contribute to the topic, please stop posting nonsense and links to something that has nothing to do with this topic.
Thanks.
Vidar
-
Today the axle that holds the inner gear broke off. I was playing a little too hard.
I need to find ball bearings that have 13mm outer diameter that fits inside the inner gear. I have one, but need more to fill the hight of 12mm.
Then I will build a more solid construction with small ballbearings supporting the outer gear, by placing them outside it. I cannot come up with a better solution to make a smooth and controlled spin.
I also must grind away a tiny mm from the inner gear so it is more space between inner and outer gear.
Plan B is to use iron powder soaked in epoxy, that is filled inside 3D printed molds. I will search on ebay for fine iron powder.
Plan C is to use sintered iron powder cores I used to use for inductors in speaker crossovers. I have hundereds of them in two different sizes. Maybe those will do the trick.
I do not give up intill I have confirmed what causes the difference in counter torques ccw and cw.
To be continued.
Vidar
-
I finally managed to make those gears go smoother. Grinded off a little bit of the teeth on the inner gear. Made it possible to attach a magnet on both sides of it. I can confirm that friction was the reason why it counterforced more one way than the other. The inner gear is repelled on one side and attract the other side, but it seems the teeth on it isn't magnetized as I want because the gear as a whole wants to move to the side without turning. This will cause the gear to stuck more one way than the other. Now I can't feel any obvious difference anymore.
I will continue to work with a similar design, but it appears to me (as I allways have suspected) that magnets are conservative, but making things is fun anyways :-)
Vidar
-
paper copies: date 16-05-2006
http://www.cheniere.org/misc/astroboots.htm (http://www.cheniere.org/misc/astroboots.htm) page 4,5,6
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=19&ND=3&adjacent=true&locale=en_EP&FT=D&date=19770825&CC=DE&NR=2644927A1&KC=A1# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=19&ND=3&adjacent=true&locale=en_EP&FT=D&date=19770825&CC=DE&NR=2644927A1&KC=A1#)
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=4&ND=3&adjacent=true&locale=en_EP&FT=D&date=19820715&CC=DE&NR=3048277A1&KC=A1# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=4&ND=3&adjacent=true&locale=en_EP&FT=D&date=19820715&CC=DE&NR=3048277A1&KC=A1#)
bigger "magnet also called planet Tellus/Terra/Earth" :
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=5&ND=3&adjacent=true&locale=en_EP&FT=D&date=20031204&CC=US&NR=2003222512A1&KC=A1# (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=5&ND=3&adjacent=true&locale=en_EP&FT=D&date=20031204&CC=US&NR=2003222512A1&KC=A1#)
Magnets are not conservative up to the Curie point,
caused by internal " Resonanz-Katastrophe"( physical Term)
https://www.youtube.com/watch?v=xcjv_vQJO7U (https://www.youtube.com/watch?v=xcjv_vQJO7U)
grain to barr,barr to grain
(ultra-sonic waste pulverizing,windhex)
https://www.bing.com/search?q=papalexi+mandelstam&PC=U316&FORM=CHROMN (https://www.bing.com/search?q=papalexi+mandelstam&PC=U316&FORM=CHROMN)
https://en.wikipedia.org/wiki/Karl_Ferdinand_Braun
-
https://en.wikipedia.org/wiki/Karl_Ferdinand_Braun (https://en.wikipedia.org/wiki/Karl_Ferdinand_Braun)
During the development of radio (https://en.wikipedia.org/wiki/History_of_radio), he also worked on wireless telegraphy (https://en.wikipedia.org/wiki/Wireless_telegraphy). In 1897 Braun joined the line of wireless pioneers.[3] (https://en.wikipedia.org/wiki/Karl_Ferdinand_Braun#cite_note-3)[4] (https://en.wikipedia.org/wiki/Karl_Ferdinand_Braun#cite_note-4) His major contributions were the introduction of a closed tuned circuit in the generating part of the transmitter, and its separation from the radiating part (the antenna) by means of inductive coupling, and later on the usage of crystals for receiving purposes. Wireless telegraphy claimed Dr. Braun's full attention in 1898, and for many years after that he applied himself almost exclusively to the task of solving its problems. Dr. Braun had written extensively on wireless subjects and was well known through his many contributions to the Electrician and other scientific journals.[5] (https://en.wikipedia.org/wiki/Karl_Ferdinand_Braun#cite_note-Wireless-5) In 1899, he would apply for the patents, Electro telegraphy by means of condensers and induction coils and Wireless electro transmission of signals over surfaces.[6] (https://en.wikipedia.org/wiki/Karl_Ferdinand_Braun#cite_note-6)
Around 1898, he invented a crystal diode rectifier (https://en.wikipedia.org/wiki/Diode) or cat's whisker diode (https://en.wikipedia.org/wiki/Cat%27s_whisker_diode). Pioneers working on wireless devices eventually came to a limit of distance they could cover. Connecting the antenna directly to the spark gap produced only a heavily damped pulse train. There were only a few cycles before oscillations ceased. Braun's circuit afforded a much longer sustained oscillation because the energy encountered less losses swinging between coil and Leyden Jars. And by means of inductive antenna coupling the radiator was better matched to the generator. The resultant stronger and less bandwidth consuming signals bridged a much longer distance.
Pioneer of the :
https://www.bing.com/search?q=time+crystal&PC=U316&FORM=CHROMN (https://www.bing.com/search?q=time+crystal&PC=U316&FORM=CHROMN)
https://en.wikipedia.org/wiki/C._V._Raman (https://en.wikipedia.org/wiki/C._V._Raman)
The Raman effect has effectively helped to check the actual problems of the symmetry – properties of molecules thus the problems concerning the nuclear-spin in the atomic physics
https://en.wikipedia.org/wiki/Satyendra_Nath_Bose (https://en.wikipedia.org/wiki/Satyendra_Nath_Bose)
He is best known for his work on quantum mechanics (https://en.wikipedia.org/wiki/Quantum_mechanics) in the early 1920s, providing the foundation for Bose–Einstein statistics (https://en.wikipedia.org/wiki/Bose%E2%80%93Einstein_statistics) and the theory of the Bose–Einstein condensate (https://en.wikipedia.org/wiki/Bose%E2%80%93Einstein_condensate)
magnet motor:
first "motor" : chrono-(-re-)logio,chronograph https://en.wikipedia.org/wiki/Watch (https://en.wikipedia.org/wiki/Watch)
mechanical,automatic,electric,Quartz watch
"Unruh" : https://en.wikipedia.org/wiki/Balance_wheel (https://en.wikipedia.org/wiki/Balance_wheel)
https://www.bing.com/search?q=unruh+effect+an+analogy&qs=AS&pq=unruh&sk=AS3&sc=8-5&cvid=F948314B1AD84E9B997E165FB970068C&FORM=QBRE&sp=4 (https://www.bing.com/search?q=unruh+effect+an+analogy&qs=AS&pq=unruh&sk=AS3&sc=8-5&cvid=F948314B1AD84E9B997E165FB970068C&FORM=QBRE&sp=4)
time: 1/100,10,1 second,minute,hour,day,week,moon phase,solar year
https://en.wikipedia.org/wiki/A._Lange_%26_S%C3%B6hne (https://en.wikipedia.org/wiki/A._Lange_%26_S%C3%B6hne)
GTC worldtime watch to Universal time
https://en.wikipedia.org/wiki/Universal_Time (https://en.wikipedia.org/wiki/Universal_Time)
all-time-kalendar https://en.wikipedia.org/wiki/Perpetual_calendar
Zeit-Lupe
Zeit-Raffer
https://www.seikowatches.com/world/technology/kinetic/perpetual.html (https://www.seikowatches.com/world/technology/kinetic/perpetual.html)
https://en.wikipedia.org/wiki/Automatic_quartz (https://en.wikipedia.org/wiki/Automatic_quartz)
https://en.wikipedia.org/wiki/Automatic_transmission (https://en.wikipedia.org/wiki/Automatic_transmission)
a magnet motor :
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=4&ND=3&adjacent=true&locale=en_EP&FT=D&date=19810301&CC=SE&NR=8006009L&KC=L (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=4&ND=3&adjacent=true&locale=en_EP&FT=D&date=19810301&CC=SE&NR=8006009L&KC=L)
http://www.keelynet.com/ohsako/ohsako.htm (http://www.keelynet.com/ohsako/ohsako.htm)
permanent/electro magnetic couple:
http://portal.groupkos.com/index.php?title=Electromagnetic_Coils (http://portal.groupkos.com/index.php?title=Electromagnetic_Coils)
-
lancaIV,
Why do you insist on polluting other peoples threads with stuff that has no connection whatsoever with the subject of the thread? If you want to post a bunch of disconnected stuff why don't you start your own thread? Then you can post all the stuff you want where it can be easily ignored by those of us that don't want to read about everything not connected to the subject of someone else's thread.
-
citfa,it is cause to get faith, to get trust
cause it is based by knowledge of highest degree(academics of science) and based by experience threw experiments and their repeat to become
physical and technical standart.
Did you read "Reply 7" ?: ignorance of basics and fundamentals of magnets their orientation and effect
Posts: 2466 not really a "newbie"
First construction then thinking about it ?
Or: learning by doing - it: at first virtual(simulation) prototype
-seconds real prototype
Why do you not correct him by false understanding about the matter ? f.e."magnets are conservativ-e"
Do you want that the forum-members and guests will stay in
"stone-age"-science-levelling ?
Finally: Low-Q has the wright right to correct me about wrong statements,your reply,from physics and technics standpoint is worthless ergo: for future progression "non grata" !
It is more like unwished: https://de.wikipedia.org/wiki/Pollution
My links:
Gear pump and magnets Board: mechanic
Contribution to F=BIL like to find in industrial permanent magnets
or bimetals
and perpetal/permanent free energy motion devices
as new concept or commercial product
scientifical consense instead members nosense
Sincerely
OCWL
p.s.: II.
Low-Q
I will leaving now your thread/theme but this points above are clearly for all threads and themes guilty and finally: Nobel-award,"asymmetry(is perfection,no end=endless)
https://www.google.pt/search?q=f%3Dbil&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=zoW4Wd3QJOas8weM0ragCQ (https://www.google.pt/search?q=f%3Dbil&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=zoW4Wd3QJOas8weM0ragCQ)
https://www.google.pt/search?client=firefox-b&dcr=0&q=f%3Dbil+in+permant+magnets&nfpr=1&sa=X&ved=0ahUKEwiUi62H_qDWAhVCaxQKHZycB58QvgUIIygB&biw=640&bih=894&dpr=1.25 (https://www.google.pt/search?client=firefox-b&dcr=0&q=f%3Dbil+in+permant+magnets&nfpr=1&sa=X&ved=0ahUKEwiUi62H_qDWAhVCaxQKHZycB58QvgUIIygB&biw=640&bih=894&dpr=1.25)
-
Thanks for informative post. I thaught for a second that you was a spam-robot or something ;D
This quote looks (for me) more like a conversation than the other posts :)
Well, I have made it some what clear, that I do this impossible experiments to learn.
Magnets are conservative, but when an idea pops up, I need to build it to understand where the problems are hidden.
I find it very inspireing, educational to do so.
You're absolutely welcome to reply, but your topics about radios, biology or whatever, was just confusing, and it looked like nonsense to bias my topic into something different.
I have a couple more ideas to post and learn from. I think it is worth the time showing others my own experience.
Vidar
citfa,it is cause to get faith, to get trust
cause it is based by knowledge of highest degree(academics of science) and based by experience threw experiments and their repeat to become
physical and technical standart.
Did you read "Reply 7" ?: ignorance of basics and fundamentals of magnets their orientation and effect
Posts: 2466 not really a "newbie"
First construction then thinking about it ?
Or: learning by doing - it: at first virtual(simulation) prototype
-seconds real prototype
Why do you not correct him by false understanding about the matter ? f.e."magnets are conservativ-e"
Do you want that the forum-members and guests will stay in
"stone-age"-science-levelling ?
Finally: Low-Q has the wright right to correct me about wrong statements,your reply,from physics and technics standpoint is worthless ergo: for future progression "non grata" !
My links:
Gear pump and magnets Board: mechanic
Contribution to F=BIL like to find in industrial permanent magnets
or bimetals
and perpetal/permanent free energy motion devices
as new concept or commercial product
scientifical consense instead members nosense
Sincerely
OCWL
p.s.: II.
Low-Q
I will leaving now your thread/theme but this points above are clearly for all threads and themes guilty and finally: Nobel-award,"asymmetry(is perfection,no end=endless)
https://www.google.pt/search?q=f%3Dbil&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=zoW4Wd3QJOas8weM0ragCQ (https://www.google.pt/search?q=f%3Dbil&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=zoW4Wd3QJOas8weM0ragCQ)
https://www.google.pt/search?client=firefox-b&dcr=0&q=f%3Dbil+in+permant+magnets&nfpr=1&sa=X&ved=0ahUKEwiUi62H_qDWAhVCaxQKHZycB58QvgUIIygB&biw=640&bih=894&dpr=1.25 (https://www.google.pt/search?client=firefox-b&dcr=0&q=f%3Dbil+in+permant+magnets&nfpr=1&sa=X&ved=0ahUKEwiUi62H_qDWAhVCaxQKHZycB58QvgUIIygB&biw=640&bih=894&dpr=1.25)
-
Conversation about success and fail of i(m)-/material objects needs the strict https://en.wikipedia.org/wiki/Conditioning (https://en.wikipedia.org/wiki/Conditioning)
without the misuse of strictly "physics Terms- and Termination" in inflated vulgar= non conditionized manner
=personal definition without geral -professional(expertise:q.e.d.)-consense world-wide
overall theme: gear pump and magnets Board : mechanic
or : Low-Q gear pump and magnet attempt
"magnets are conservative": magnets are a piece of material with a physical effect
this physical effect is relatively - distance (to other non-/ferrit material)dependant- time-constant (effect decay)
and material either ambiental temperature dependant
magnets to magnets positioning in a shaft wheel for "perpetuum motion" is one trial,
to get out worthfull work gain the next,
more expensive the prototyping phase and later the propably selling phase of the only-magnets device
in relationship to variable em/pm-concepts (who will/shall pay the R&D investment ?)
only permanent magnets:
maximal precision degree (magnets producer : up to 4000 different shapes,forms,effect orientation, et cet ...)
small charge production costs (up to 10000% more expensive than mass production)
= minimal construction freedom-e about time-/finance-budget
handicap: fixed rotation- fixed output - fixed transmission gear
altruistic device for the "museum of eco-nomical hoaxes" (german: personal "Liebhaberei")
espacenet is the international archiv-e for thousands of such appointed/applied trials,success/fail independant
un-(deemed to withdrawn)/granted
https://worldwide.espacenet.com/advancedSearch?locale=en_EP (https://worldwide.espacenet.com/advancedSearch?locale=en_EP)
entering with "magnet motor"
nice "thermovoltaic/thermalnoise measuring instrument" https://av.tib.eu/media/10881 for em and pm magnets
-
I will probably never succeed, and the prototype cost is next to zero ;)
Vidar
-
Your experience and living costs up to date not including ::) ,your time spent :'( ,the 3D-print machine costs :o and R.O.I. not calculating 8) ,
using by near hand materials ??? et cet ....
The NASA spent more than 1 Mio. Dollar for orbital-ink,the Sowjets took a lead-pencil: ingenious ?
-
LOL ;D ;D
-
"The NASA spent more than 1 Mio.
Dollar for orbital-ink"
Those darn leftists
-
The printer is a 2.nd hand one. Bought cheap. I use it for many other projects as well. RC-parts, knots, spacers, spare parts, hooks for sack straps, covers for electronics, and much more. It has payed itself.
I'm already living, I spend much more time on everythig else. In % maybe 1% time spent on this magnet-things. It takes me 5 minutes to make a digital model. 1 minute to prepare the printprocess. The printer prints all by itself wile I do other stuff - like lawning, other projects and repairs, oil change, household stuff, resting, eating, listen to music. No time wasted on learning how stuff works.
Feeling good, and my wife and kids aren't complaining.
Vidar
Your experience and living costs up to date not including ::) ,your time spent :'( ,the 3D-print machine costs :o and R.O.I. not calculating 8) ,
using by near hand materials ??? et cet ....
The NASA spent more than 1 Mio. Dollar for orbital-ink,the Sowjets took a lead-pencil: ingenious ?
-
" ..... feeling good ...." why not if the moment let you feel so about the "amortized social economy" use and inside living
this is the social cristian communitarism,often misunderstood as (partidary) "communism"
" No time wasted on learning how stuff works. "
Universities and books : what a waste ::)
language de-/code : what a waste
C.A.D. to C.N.C. tool : what a waste
family members ill : medicinal advicer in e-/book kind : what a waste
learnig by : re-/search of successes and faults/mistakes and
doing : it better (by trying) to only use the success "highway"
" No time wasted on learning how stuff works. "
Anti-AIDS campaign in Africa(Kenia):
the advicer showed the "crowed of mans" how a condome shall be used ,turning this object on a finger.
The instructed mans did it ,they turned their free delivered condoms on their finger to get the "safer "-feeling during their session
moral from the " misunderstood lesson" : no change in infection progression
be clear,be open
AIDS to ATDS :
Anti Tabu Defense System
instructor : take an artificial phallus or show it by using your own genital organ
One of the first AIDS-death : https://de.wikipedia.org/wiki/McCarthy-%C3%84ra (https://de.wikipedia.org/wiki/McCarthy-%C3%84ra) communism-hater
FPÖ (Austria) https://de.wikipedia.org/wiki/J%C3%B6rg_Haider (https://de.wikipedia.org/wiki/J%C3%B6rg_Haider)
" No time wasted on learning how stuff works. "
on learning how stuff works : no time wasted but for ti and me invested
Investitur
-
This is overunity.com. Not a charity site with a bunch of religious crackpots!
You can post your AIDS-campain elsewhere :o
Contribute with relevance, or leave the thread for good.
Vidar
" ..... feeling good ...." why not if the moment let you feel so about the "amortized social economy" use and inside living
this is the social cristian communitarism,often misunderstood as (partidary) "communism"
" No time wasted on learning how stuff works. "
Universities and books : what a waste ::)
language de-/code : what a waste
C.A.D. to C.N.C. tool : what a waste
family members ill : medicinal advicer in e-/book kind : what a waste
learnig by : re-/search of successes and faults/mistakes and
doing : it better (by trying) to only use the success "highway"
" No time wasted on learning how stuff works. "
Anti-AIDS campaign in Africa(Kenia):
the advicer showed the "crowed of mans" how a condome shall be used ,turning this object on a finger.
The instructed mans did it ,they turned their free delivered condoms on their finger to get the "safer "-feeling during their session
moral from the " misunderstood lesson" : no change in infection progression
be clear,be open
AIDS to ATDS :
Anti Tabu Defense System
instructor : take an artificial phallus or show it by using your own genital organ
One of the first AIDS-death : https://de.wikipedia.org/wiki/McCarthy-%C3%84ra (https://de.wikipedia.org/wiki/McCarthy-%C3%84ra) communism-hater
FPÖ (Austria) https://de.wikipedia.org/wiki/J%C3%B6rg_Haider (https://de.wikipedia.org/wiki/J%C3%B6rg_Haider)
" No time wasted on learning how stuff works. "
on learning how stuff works : no time wasted but for ti and me invested
Investitur
-
Also a Donald Trump will learn : from "No time wasted on learning how stuff works." to "Learning how stuff works"
about gravity,magnetism,motor,pump and much more RESEARCH and DEVELOPMENTS
eaven the romano-catholic church had to recognize their own disease and defall : after 500 years
Gallileo Gallilei,member from the romano-catholic church
https://de.wikipedia.org/wiki/Galileo_Galilei (https://de.wikipedia.org/wiki/Galileo_Galilei)
mentor https://de.wikipedia.org/wiki/Evangelista_Torricelli (https://de.wikipedia.org/wiki/Evangelista_Torricelli) (Torr)
3d-vacuum modelling
http://www.materialise.com/en/manufacturing/3d-printing-technology/vacuum-casting
https://de.wikipedia.org/wiki/Jesuiten (https://de.wikipedia.org/wiki/Jesuiten)
Ein weiteres wichtiges Arbeitsfeld der Jesuiten war ihrem Gelübde gemäß die Bildung (https://de.wikipedia.org/wiki/Bildung) der Jugend: Die von den Jesuiten gegründeten Schulen und Universitäten wie z. B. die Universität in Dillingen (https://de.wikipedia.org/wiki/Universit%C3%A4t_Dillingen) und im damals polnisch-litauischen (https://de.wikipedia.org/wiki/Polen-Litauen) Wilna (https://de.wikipedia.org/wiki/Universit%C3%A4t_Vilnius) sollten Gewähr dafür bieten, dass kommende Generationen fest verwurzelt im katholischen Glauben heranwuchsen.
Der Orden als BildungsinstitutionDie Jesuiten spielten lange eine große Rolle im Bildungssystem Europas. Die Anregung zur Einrichtung von jesuitischen Bildungsstätten (https://de.wikipedia.org/wiki/Jesuitenschule) ging auf Ignatius von Loyola selbst zurück, der 1551 vorschlug, dort außer Theologie (https://de.wikipedia.org/wiki/Theologie), auch Logik (https://de.wikipedia.org/wiki/Logik) und die antiken Klassiker (https://de.wikipedia.org/wiki/Antike) zu lehren; später kamen noch Mathematik (https://de.wikipedia.org/wiki/Mathematik), Astronomie (https://de.wikipedia.org/wiki/Astronomie), Physik (https://de.wikipedia.org/wiki/Physik) und Philosophie (https://de.wikipedia.org/wiki/Philosophie) hinzu. Im 17. Jahrhundert verbreitete der Orden das Thesenblatt (https://de.wikipedia.org/wiki/Thesenblatt), die großformatige und in Kupfer gestochene (https://de.wikipedia.org/wiki/Kupferstich) Ankündigung der akademischen Disputatio (https://de.wikipedia.org/wiki/Disputatio), im gehobenen katholischen Bildungswesen. Zu Beginn des 18. Jahrhunderts gab es in ganz Europa zahlreiche Schulen, an denen z. B. die Söhne von Adligen, aber auch Angehörige niedrigerer sozialer Klassen unterrichtet wurden. Aus den Reihen der Schüler kamen u. a. Rugjer Josip Bošković (https://de.wikipedia.org/wiki/Rugjer_Josip_Bo%C5%A1kovi%C4%87), René Descartes (https://de.wikipedia.org/wiki/Ren%C3%A9_Descartes), Voltaire (https://de.wikipedia.org/wiki/Voltaire), Marie Jean Antoine Nicolas Caritat, Marquis de Condorcet (https://de.wikipedia.org/wiki/Marie_Jean_Antoine_Nicolas_Caritat,_Marquis_de_Condorcet), Denis Diderot (https://de.wikipedia.org/wiki/Denis_Diderot) und Henry Humphrey Evans Lloyd (https://de.wikipedia.org/wiki/Henry_Lloyd). Ein weiterer wichtiger Beitrag war, dass in Publikationen des Ordens, etwa dem Journal de Trévoux (https://de.wikipedia.org/wiki/Journal_de_Tr%C3%A9voux), öffentlich zeitgenössische Literatur diskutiert werden konnte, ohne dabei Inquisition (https://de.wikipedia.org/wiki/Inquisition) oder Zensur fürchten zu müssen. Aus diesem Grund bedauerte selbst der Vordenker der Aufklärung (https://de.wikipedia.org/wiki/Vordenker_der_Aufkl%C3%A4rung) Voltaire den Niedergang des Ordens im späteren Verlauf des 18. Jahrhunderts. – Andererseits gehörten Jesuiten an vorderster Front zu denjenigen, die in der zweiten Hälfte des 17. Jahrhunderts für das Verbot des Werks von René Descartes eintraten, als nach seinem Tod Klagen aufkamen, er habe bei seinen naturwissenschaftlichen Studien keinen Raum für Gott gelassen.[7] (https://de.wikipedia.org/wiki/Jesuiten#cite_note-7) Der Mathematikhistoriker Amir Alexander nennt den weltanschaulich geprägten Kampf der Jesuiten gegen die Verwendung von Infinitesimalzahlen (https://de.wikipedia.org/wiki/Infinitesimalzahl) als wesentlichen Grund für den Niedergang der Jahrhunderte alten Mathematiktradition auf der italienischen Halbinsel Ende des 17. Jahrhunderts, und die Verlagerung der Hauptzentren des mathematischen Fortschritts in Gebiete nördlich der Alpen, wo die Jesuiten weniger Einfluss hatten.[8] (https://de.wikipedia.org/wiki/Jesuiten#cite_note-8)
Weltweit führen die Jesuiten heutzutage Hochschulen, Schulen und Internate, in denen sie insgesamt mehr als zwei Millionen jungen Menschen allgemeine Bildungsinhalte vermitteln. Der Orden verfolgt dabei die Absicht, sie zugleich auf ihr späteres Leben nach den Grundsätzen des christlichen Menschenbildes (https://de.wikipedia.org/wiki/Menschenbild) vorzubereiten: zu Menschen für andere heranzureifen.
relevant enough ?
-
Dear LancaIV,
I have come to the conclusion that I had to report, to the administrator, your littering of threads.
Your replies have nothing to do with the topics of the threads, and you just keep on doing it in spite of being encouraged to contribute to the topics.
I've been fed up with this and have therefore reported your behavior, with an exclusion request.
Your language isn't bad, you haven't written any offensive, but you are still littering by making replies that doesn't belong to this forum. Seriously, what has Donald Trump to do with my topic?
I hope you understand my concern - I'm pretty sure you do.
I've also sent you a PM with the same message, so I'm sure you get it.
Vidar
-
Dear user Vidar,
https://www.google.pt/search?q=jesuiten+entwiclungen+und+erfindungen&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=WVi6WZHkDPOs8we1to_ADw (https://www.google.pt/search?q=jesuiten+entwiclungen+und+erfindungen&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=WVi6WZHkDPOs8we1to_ADw)
it is all about science(with Babylon,google and and other translator systems really easily to get a +/- serious translation),it is about hide and seek,it is also about religion-internal war ( Domenicus: in quis .... ?-ation ,less "pro/contra God",more "pro/contra pope").
You wish to get help/advices/links from the other overunity.com-
members,like to read in your posts in the "Gear pump and magnets"
but you are also giving help/advices/links in the other threads.
"Unshamed"" for an adult(as husband with childs" )you deny the
worth of Research&Development by animation or professional.
........ no time .............
Probably this is good to hear by the teachers of your childs.
authority-free education or
remembering:
1 minute to prepare the printprocess.
1minute-all-in-one-lessons
then they come back to home,freetime
religion(reliquii): what will rest from you,after your dye(R.I.P.)
beside an used 3d-print-instrument:
review from your generation next,your childs and wife !?
Do you only work for you,your wife and childs
or do you work for them and the overunity.com-user and guests and by actio-reactio whole society ?
............ I'm already living, ....
Kaspar besucht das Altersheim :
"Seid ihr auch alle da ?"
Die Alten: "Jaaaaaaaaaaaaaaaaaaaa !"
Kaspar: "Aber nit mer lang !"
------------------------------------------------------------------------
Julius Gaius C(h)aesar
alea acta est (game end)
veni(venire)-vidi(videre)-vici(vincere)
Donald Trump,Self-(law&order thinking)made-man
against the constitutional laws and rights
Low-Q
I will probably never succeed ( neverending story)
--------------------------------------------------------------------------------------------------------------------------------------------
This is overunity.com. Not a charity site with a bunch of religious crackpots!
You can post your AIDS-campain elsewhere (http://overunity.com/Smileys/default/shocked.gif (http://overunity.com/Smileys/default/shocked.gif))
comment:
This is www.overunity.com (http://www.overunity.com) , a free energy charity site
members/forum-user are "religious"(individual meaning) and other probably themself attributing atheists,but mostly not analphabets.
I can write for myself: not member from a church/sekt/religious people movement
But became baptizised as baby ,later the communion and last confirmated the membership in the romano-catholic church up
to the day in the year 1987 when I left the community officially.
And I can write to you: this is not and has not been "my" Anti-Immun-Defense-System-campaign,it was estatal.
But the education method shows us how stupid man/-s can be by taking all 1:1 = mimikry
(sons doing/trying ever/often all the same like her dads)
but 1:1 we wish by 3d-solid form-printing,precision to 1/10000 in
magnetism and motor : which one (only a short list)
https://de.wikipedia.org/wiki/Liste_bedeutender_Jesuiten (https://de.wikipedia.org/wiki/Liste_bedeutender_Jesuiten)
probably in future we will have not only a answer/question-virtual brain system
we will get an "artificial object" to "real object" instrumentarium,fast and accurate
http://www.n-tv.de/mediathek/videos/panorama/Roboter-loest-Zauberwuerfel-in-einer-Sekunde-article16866756.html (http://www.n-tv.de/mediathek/videos/panorama/Roboter-loest-Zauberwuerfel-in-einer-Sekunde-article16866756.html)
no resistance by believing this
--------------------------------------------------------------------------- magnet motor
magnets ,loosing over the time or suddenly (Barkhausen) their effect: how to recharge them
https://www.google.pt/search?q=recharging+magnets&ie=utf-8&oe=utf-8&client=firefox-b&gfe_rd=cr&dcr=0&ei=R7G6WYWvC6Kp8wf96b74DA
-
http://www.freepatentsonline.com/DE19604089A1.html (http://www.freepatentsonline.com/DE19604089A1.html)
or
https://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19970807&DB=EPODOC&locale=en_EP&CC=DE&NR=19604089A1&KC=A1&ND=4
http://www.freepatentsonline.com/DE19605730.html (http://www.freepatentsonline.com/DE19605730.html)
or
https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=19970821&CC=DE&NR=19605730A1&KC=A1 (https://worldwide.espacenet.com/publicationDetails/biblio?DB=EPODOC&II=0&ND=3&adjacent=true&locale=en_EP&FT=D&date=19970821&CC=DE&NR=19605730A1&KC=A1)
http://www.freepatentsonline.com/DE3435068.html (http://www.freepatentsonline.com/DE3435068.html)
or
https://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19851003&DB=EPODOC&locale=en_EP&CC=DE&NR=3435068A1&KC=A1&ND=4 (https://worldwide.espacenet.com/publicationDetails/biblio?FT=D&date=19851003&DB=EPODOC&locale=en_EP&CC=DE&NR=3435068A1&KC=A1&ND=4)
http://www.google.com/patents/US6084322?hl=de (http://www.google.com/patents/US6084322?hl=de)
The force of attraction between any two magnets is the result of the force of one magnet (M1) multiplied by the force of the other (M2), divided by the square of the distance between them (d2). This formula: F=M1 ×M2 /d2, is known as Coulomb's law for magnetic poles.
http://www.magneticsolutions.com.au/fluxgraphs-entry.html (http://www.magneticsolutions.com.au/fluxgraphs-entry.html)